[Q] sprint note 3 wont boot into recovery - Sprint Samsung Galaxy Note 3

Hello, I have a sprint note 3 rooted that wont boot into recovery im on liquid smooth 4.4.4. bootloader N900PVPUCNC5D base band N009PVPUBMI3 I have tried newer recovery and older ones through odin 3.07 3.09 from cwm to twrp they just go into boot loop I have to odin philz_touch_6.48.4-hlte.tar.md5 to get phone to reboot normal

Freakout1 said:
Hello, I have a sprint note 3 rooted that wont boot into recovery im on liquid smooth 4.4.4. bootloader N900PVPUCNC5D base band N009PVPUBMI3 I have tried newer recovery and older ones through odin 3.07 3.09 from cwm to twrp they just go into boot loop I have to odin philz_touch_6.48.4-hlte.tar.md5 to get phone to reboot normal
Click to expand...
Click to collapse
With a baseband of MI3 that device is probably out of warranty ? Is there a reason my you are using such an old baseband ? If not, you should bring the device up to date with a least a stock rooted NC5 (bootloader/baseband/modem) as a base to work from. You might check out this thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 Enjoy !!!

Freakout1 said:
Hello, I have a sprint note 3 rooted that wont boot into recovery im on liquid smooth 4.4.4. bootloader N900PVPUCNC5D base band N009PVPUBMI3 I have tried newer recovery and older ones through odin 3.07 3.09 from cwm to twrp they just go into boot loop I have to odin philz_touch_6.48.4-hlte.tar.md5 to get phone to reboot normal
Click to expand...
Click to collapse
I had a recovery boot issue some time back and got everything working after awhile. Check out this… Maybe it will help. http://forum.xda-developers.com/not...boot-issue-t2884488/post55622374#post55622374

Related

[Q] TWRP and CWM for Verizon Galaxy S4

I have Safestrap up and running again but I'm wondering how can you install other recoveries like TWRP and CWM so I can boot directly into the custom recovery without a splashscreen I believe it's called (newbie here). I followed instructions online with GooManager for TWRP and ROM Manager for CWM but neither will actually boot into the custom recovery.
In GooManager after it says the TWRP recovery has been installed, it will reboot but then take me to the downloading boot screen and say "could not do a normal boot." What's with that? I actually had to use ODIN again to flash the stock ROM back (I tried this three times to no avail...)
And for CWM it says it successfully flashed in ROM Manager but when I actually reboot into recovery, whether it be from the app or manually, it will just boot into the stock Android recovery. I don't get it...
What am I doing wrong and/or is my phone not compatible with these recoveries?
Specs:
Verizon Galaxy S4
Android 4.3
Build MK2
Kernel MK2
Also are there any other recoveries that might work with my phone?
Thanks!
....
Bootloader is locked and custom recovery can't be installed on newer/updated S4. Do some reading to find out what is and is not possible with a locked bootloader.
the immunity said:
I have Safestrap up and running again but I'm wondering how can you install other recoveries like TWRP and CWM so I can boot directly into the custom recovery without a splashscreen I believe it's called (newbie here). I followed instructions online with GooManager for TWRP and ROM Manager for CWM but neither will actually boot into the custom recovery.
In GooManager after it says the TWRP recovery has been installed, it will reboot but then take me to the downloading boot screen and say "could not do a normal boot." What's with that? I actually had to use ODIN again to flash the stock ROM back (I tried this three times to no avail...)
And for CWM it says it successfully flashed in ROM Manager but when I actually reboot into recovery, whether it be from the app or manually, it will just boot into the stock Android recovery. I don't get it...
What am I doing wrong and/or is my phone not compatible with these recoveries?
Specs:
Verizon Galaxy S4
Android 4.3
Build MK2
Kernel MK2
Also are there any other recoveries that might work with my phone?
Thanks!
Click to expand...
Click to collapse
I'm not sure how any one misses a sticky thread like this one:
http://forum.xda-developers.com/showthread.php?t=2606501

Mega...semi-bricked??

So I have a Sprint Galaxy Mega and it seems as though it may be semi-bricked. It will not boot past the GALAXY MEGA logo. It will just continuously power cycle to and from that logo. If I attempt to put it in recovery, it will say "RECOVERY BOOTING" in blue letters as usual, then power cycle right back to the GALAXY MEGA screen. It will boot into Odin mode and accept Odin files, but after attempting do do a typical "stock Odin" scenario, nothing has changed. I looked around for the Pit but cannot seem to find it. Does anyone has a reliable link to the latest Odin stock restore and the PIT file that matches it?
Maybe an error with your system data. So you can't reboot into recovery ? If you can try to wipe data and cache and reboot.
It may be an abnormal re-partition when flashing stock rock, and then I can't help you (have the i9205 international model). Some members of this section have the Sprint version, try to send them a PM if nobody can help you
Nope, no recovery. I was considering flashing a custom recovery to it to see what it does but I don't wanna kill the phone any more than it already is...
Yes I understand. But flashing custom recovery can solve your problem, only if you can boot on it. I think it can't make more damages to your phone, he just always stuck on boot phase like a brick, but if you don't want to try, wait for a developer making you a PIT file. More safe, the Galaxy Mega have a too poor development support for risk anything...
Well I went ahead and flashed TWRP to it. It will boot into TWRP just fine. Tried flashing the stock L900 ROM zip and it still won't boot.
Well I installed a custom ROM, SlimKat, and the phone boots. If I install the stock ROM located in the following link, OP's signature, the phone goes right back to bootlooping. ???
I need either the stock ROM or a ROM with dialer codes because this phone will be flashed to a regional carrier.
what recovry version you use bro. maybe recovery problem. try use your custom rom to flash another recovery from philz. the latest one. some time recovery dont work properly to downgrade from 4.4.2 to stock 4.2.2.
Great, so with Philz Touch Recovery, I never had problems for downgrade and I do this often for testing roms. Now it should not bootloop if you reflash stock.
I am using "CWM-based recovery 6.0.4.7"
I will try Philz recovery
After trying Philz recovery to flash the stock file I found, it once again bootlooped. Is there another stock ROM floating around somewhere or possibly a custom ROM that has dialer codes such as ##3282# enabled?
No idea... But actually the most complete stock based custom rom is MegaFire I think. Flash V5 (not V5x !) it should be enabled.
I don't see what is the problem while flashing stock rom... Oh ! Maybe you haven't enabled USB Debugging, I forgot to do that one time and I had some issues, in case you try to flash a firmware where Knox or others features are on with a modem without these, may cause bootloop. I've searched for 2 days before solve that little problem...
Have you tried another firmware ? If you can flash custom rom, something went wrong before flash... Odin folder is complete ?
Strange...once again a boot loop after flashing the MegaFire ROM
I'm almost certain I need the PIT file. I cannot find it anywhere.
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
I'm having the same problem too dude, I
I download n flash all.the firmware I could find online, since I have no idea what the country of origin is. But most of them work, but no WiFi, Bluetoothand the sim card slot don't read
VirtueToVice said:
Well I got the phone to boot from that rooted stock ROM FINALLY. I don't remember for sure but I think what I did was first flash TWRP, then flashed boot.img.tar that I found somewhere, it was listed for the Sprint Mega. I then booted into TWRP and flashed the stock rooted ROM(zip) I mentioned before. It now boots perfectly and everything works except one tiny little detail. No WiFi, no cellular signal at all. Baseband version: unknown in About phone.Already tried flashing the Sprint stock modem from the same download link as the ROM and it didn't work.
Click to expand...
Click to collapse

Mega won't boot / stuck on Odin mode or Download mode

I have a SGH-i527 that got the 4.4.2 OTA update last night. I'm not sure what I did, but I think I tried to flash the 4.2.2 via Odin when I was encountering problems with Kit Kat. Now when trying to boot, I am stuck on the "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." screen.
I have tried to get Kies to go through emergency recovery but the phone never shows up there. And obviously, trying the flash the 4.2.2 firmware in odin will not work. So I am stuck. Any thoughts?
If you did flash the JB ROM after the KitKat update, you will have to flash the KitKat firmware since you cannot downgrade the bootloader and you have probably voided the warranty. Flash the KitKat update for the specific model and DO NOT try to root, flash custom recovery or downgrade to Jellybean since it will trip the Knox boot loader and you will have a brick. Hope this helps
To my understanding, there is not a KK stock rom that I can flash (at least for the i527). And since I can't flash back to 4.2.2, it looks like I'm stuck.
Why flashing 4.2.2 by Odin did not change your situation? Maybe try to flash another ROM?

[Q] Can Not Flash Custom Recovery(CR)

Phone Specs:
Model Number: SCH-I605
Operating System: Android 4.4.2
Build: KOT49H.I605VRUFND7
t0lteVZW
I am not able to flash a Custom Recovery (CR.) I have tried to flash a CR by using the app methods: goo manager, rom manager, rashr, rom toolbox. I have also tried flashing 3 versions of TWRP via Odin which failed and sent my phone in a boot loop. I have tried to install twrp v2.6.0.0 - v2.7.20 via the aforementioned apps and cwm 3 or 4 times
After the flash is successful, it does not boot into recovery. Instead, it tries to boot only to get stuck at the device model screen and then it shuts off. Every time I flash a CR, I get stuck at the phone model screen after boot and have to re-flash I605VRUFND7_I605VZWFND7_VZW in order to get back into touchwiz.
I am able to root my phone with ghetto root v1.
Any ideas on how to flash a Custom Recovery?
gmirsky2 said:
Phone Specs:
Model Number: SCH-I605
Operating System: Android 4.4.2
Build: KOT49H.I605VRUFND7
t0lteVZW
I am not able to flash a Custom Recovery (CR.) I have tried to flash a CR by using the app methods: goo manager, rom manager, rashr, rom toolbox. I have also tried flashing 3 versions of TWRP via Odin which failed and sent my phone in a boot loop. I have tried to install twrp v2.6.0.0 - v2.7.20 via the aforementioned apps and cwm 3 or 4 times
After the flash is successful, it does not boot into recovery. Instead, it tries to boot only to get stuck at the device model screen and then it shuts off. Every time I flash a CR, I get stuck at the phone model screen after boot and have to re-flash I605VRUFND7_I605VZWFND7_VZW in order to get back into touchwiz.
I am able to root my phone with ghetto root v1.
Any ideas on how to flash a Custom Recovery?
Click to expand...
Click to collapse
You can't. You have to unlock the bootloader to install a custom recovery. 4.3 mj9 and up bootloaders haven't had an unlock method. You also can't downgrade the bootloaders.
I was under the impression the Verizon Note 2 baseband was already unlocked

Bricked?? Stuck at samsung logo screen for 1 sec then reboots.

Okay, So the title pretty much says it all. I am stuck at the Samsung boot logo (not bootanimation) and it only shows for about 1 second then reboots and continues.
This started after I tried to flash a rom and it messed up and I tried to flash via odin. I was on MJ9 and and got a bootloop so I did the odin thing. I've used odin before but it is not working well for me now.
I am able to boot into download mode but TWRP no longer works. I was able to flash via odin and it says success but the phone does not reboot like it should.
I have purchased a galaxy nexus on the cheap to hold me over until the nexus 6 is out but if I can fix my note, I would like to.
I know there were other threads about this same issue but it seems that they are all on a different version of the note, or on a s3 or something. Not to mention, I don't see anything that I could try without asking for some help on here. Can someone maybe point me in the direction of the factory firmware (preferably a rootable or already rooted version) that I can flash that will play well with my note.
Thanks guys!!!
amberkalvin said:
Okay, So the title pretty much says it all. I am stuck at the Samsung boot logo (not bootanimation) and it only shows for about 1 second then reboots and continues.
This started after I tried to flash a rom and it messed up and I tried to flash via odin. I was on MJ9 and and got a bootloop so I did the odin thing. I've used odin before but it is not working well for me now.
I am able to boot into download mode but TWRP no longer works. I was able to flash via odin and it says success but the phone does not reboot like it should.
Click to expand...
Click to collapse
Before you tried to flash a custom ROM and things went wonky...were you on Verizon's factory stock 4.3 MJ9 firmware, or on Beanstown106’s modified 4.3 MJ9 with TWRP installed?
Does the phone still boot into stock recovery? If so, you may be able to fix the phone by doing a factory reset.
amberkalvin said:
Can someone maybe point me in the direction of the factory firmware (preferably a rootable or already rooted version) that I can flash that will play well with my note.
Click to expand...
Click to collapse
If you were on Verizon's factory stock 4.3 MJ9, then you won't be able to Odin flash back to 4.1.2 or any earlier Android version because the bootloader has been locked down tight on 4.3 (and 4.4.2) with no current do it yourself method to unlock for those newer versions. You would want to restore the phone back to factory stock 4.3 though, if that's what version you were on before your phone got messed up. You can root the phone on 4.3 with saferoot, then use safestrap recovery to flash some custom Touchwiz ROM's.
If you were on the 4.1.2 based bootloader, (but running Beanstown106’s MJ9 firmware and TWRP), then you would want to restore your phone back to factory stock 4.1.2 and then root and unlock the bootloader again with CASUAL. This would give you the most flexibility with flashing custom kernels, ROM's, etc...
Check out Section 1b in Droidstyle's restore guide at this link: http://forum.xda-developers.com/showthread.php?p=34891181. The guide has download links for the files you'll need to restore the phone back to the correct build version.

Categories

Resources