Hey guys,
My friend asked me to help him out with his Motorola Razr XT910 phone. He tried to root it and flash a new rom but something went wrong because the phone is half(?)-dead now.
It just shows the Motorola logo when I start it and a few seconds later it shuts down. The strange thing is that it turns itself on automatically a few minutes later so I can't turn it off at all. Also, I can't start it with fastboot mode either (volume up+down+power).
When I try to connect it to my PC it's appearing as an unrecognised device so I'm clueless now. Most likely he killed/flashed/erased the bootloader somehow (he tried to flash something in fastboot mode).
Is there anything that I could try?
Does the phone still have battery? Because if it doesn't then you would need to get a factory cable.
Here's how to get into fastboot mode :
(1) When you see the Motorola logo, press the volume down button + power button and wait for the phone to turn off (there will be a slight white flash line on the screen)
(2) As soon as it does, press the volume up+volume down+power button and you should get it. It isn't easy, will take a few tries.
However, if it's battery is drained, just get the factory cable. It automatically puts the phone in fastboot mode
Plug it up to charge for at least 10 minutes then do power and down arrow for 20 seconds then release both and do power and up arrow till you see fastboot. Let me know how you make out.
Thank you guys, I was able to get into fastboot and the phone is working again (after debricking and flashing back the old JB rom).
Another question: I was able to root the phone with the chinese rootmaster application (From this thread: http://forum.xda-developers.com/showthread.php?t=2402943 ) Is it possible to downgrade it to ICS? The phone's owner wants a hungarian ROM and the current JB rom is not containing this language. I found a central european ICS and most likely it's the latest hungarian ROM but I don't know how to flash or install it properly. Can you help me out with this? Is it possible if the phone is rooted?
szepesif said:
Thank you guys, I was able to get into fastboot and the phone is working again (after debricking and flashing back the old JB rom).
Another question: I was able to root the phone with the chinese rootmaster application (From this thread: http://forum.xda-developers.com/showthread.php?t=2402943 ) Is it possible to downgrade it to ICS? The phone's owner wants a hungarian ROM and the current JB rom is not containing this language. I found a central european ICS and most likely it's the latest hungarian ROM but I don't know how to flash or install it properly. Can you help me out with this? Is it possible if the phone is rooted?
Click to expand...
Click to collapse
You can't downgrade,it isn't possible.
Try to flash another JB rom,some of them must have hungarian language.
Sent from my Razr XT910
Related
Hi! Can someone guide me into removing or getting access to the battery of this unit. I think the kernel is corrupted coz I think I flashed the wrong one. The battery drained out. So without a working kernel, I cant charge the phone. Even in USB to PC or directly to wall charger. I want to re-insert t the battery to see if that fixes the issue.
Can someone tell me if removing the battery then plugging in the usb without the battery if I can enter flash mode or flash boot to be able to flash the correct kernel or go back to stok room for the phone? Would that work?
Or I just need to reinsert the battery then try to enter flash mode?
SITUATION:
- cant enter flash mode or fast boot.
- can hard reset (Power + volume+)
- Cant turn on the phone
-just red led when plugged in then disapperas after a few minutes (not charging)
- the phone never got wet or never been dropped. (so im hoping this is a software issue)
- phone is rooted, unlocked BL with CWM.
-started when I flashed a flshable version of CWM touch version to upgrade from version 5 to 6.
Help please. Im thinking of opening the phone to access the battery.
The idea of removing non-removable battery is not the best one, unless you really know what are you doing - and i don't think you know it.
And i think this won't help you, really not.
eclpsues said:
SITUATION:
- the battery drained out
- can hard reset (Power + volume+)
Click to expand...
Click to collapse
You can hard reset - but battery is drained?
Once, i had problem like this one, but i managed to get into fastboot and re-flashed right kernel.
What were you exactly doing? Rooted and BL unlocked Go? What and how were you flashing (which rom and kernel were you flashing)?
Sent from my XGO using fingers
MyWnm said:
The idea of removing non-removable battery is not the best one, unless you really know what are you doing - and i don't think you know it.
And i think this won't help you, really not.
You can hard reset - but battery is drained?
Once, i had problem like this one, but i managed to get into fastboot and re-flashed right kernel.
What were you exactly doing? Rooted and BL unlocked Go? What and how were you flashing (which rom and kernel were you flashing)?
Sent from my XGO using fingers
Click to expand...
Click to collapse
sorry just a typo error, i mean i cant hard reset. I know how to access an embedded bat, tried it before with Xperia S. but I was hoping if can flash without doing that anymore?
Managed to disconnect and reconnect the battery; however I still cant turn it on, or even hard reset, or flash mode or fast boot. Crappppp! help. What can I do to bring this phone's life back. I flashed an update for CWM on recovery. Thats when this problem started.
any help out there?
Same problem
eclpsues said:
any help out there?
Click to expand...
Click to collapse
Hi, i am having the same problem. I flashed the kernel for another model out of noobness. So removing the battery did not help at all?
OMG right as i was typing this, the rubber band trick worked and i accessed fastboot and flashed another kernel. It wont start for now, but maybe the battery needs to be charged for a while (red led). In case you dont know (if you still have this problem), i will explain what i did (the computer just detected the device, so i think im in the clear):
1) get a rubber band and put it around vol up button (this is for fastboot; for flash it would be vol down)
2) plug the phone to your computer
3) get the fastboot.exe file (google)
4) put the correct boot.img file (or kernel, i flashed the wron boot.img, so i did it this way. I dont know what the difference is) in the same folder as fastboot.exe
4) open command prompt, go to the fastboot folder (look up commands)
5) type in "fastboot flash boot boot.img"
6) the cmd will say "waiting for device..."
leave it like that; i got purple (i guess blue plus red) led after awhile and fastboot flashed the kernel.
I will keep you informed on success or failure.
EDIT
It worked, i have a running phone.
Hey! Thanks for the post and reply, would have done that. However, i sent my phone to a repair center, and they havent got bakc at me until now, its been 3 weeks.
Was your phone unable to go fastboot and flashmode too before? And when you charge it red led appears then goes away after a few minutes? My PC cant recognize the phone, the only indicator i had was the red led when plugged in which goes away after a couple of minutes.
How long did it take for the phone to enter fastboot? Coz, I've tried holding the button (Vol+) for almost 5 minutes and nothing happens.
Can you provide me the exact situation you had? and the clear cut steps you took to fix it? Especially how many minutes for it to go to fastboot with the rubber band on?
TIA!
@ madismet
your rubber band technique actually worked!! thanks a lot!
I was just about to give up on my xperia go, when I came across your post...
thanks!! :good:
how long did it take to enter fastboot?
eclpsues said:
Hi! Can someone guide me into removing or getting access to the battery of this unit. I think the kernel is corrupted coz I think I flashed the wrong one. The battery drained out. So without a working kernel, I cant charge the phone. Even in USB to PC or directly to wall charger. I want to re-insert t the battery to see if that fixes the issue.
Can someone tell me if removing the battery then plugging in the usb without the battery if I can enter flash mode or flash boot to be able to flash the correct kernel or go back to stok room for the phone? Would that work?
Or I just need to reinsert the battery then try to enter flash mode?
SITUATION:
- cant enter flash mode or fast boot.
- can hard reset (Power + volume+)
- Cant turn on the phone
-just red led when plugged in then disapperas after a few minutes (not charging)
- the phone never got wet or never been dropped. (so im hoping this is a software issue)
- phone is rooted, unlocked BL with CWM.
-started when I flashed a flshable version of CWM touch version to upgrade from version 5 to 6.
Help please. Im thinking of opening the phone to access the battery.
Click to expand...
Click to collapse
Check this out. It's explained in pretty detail here.
hxxp://xperiagobattery.blogspot.in/2014/11/how-to-change-xperia-go-st27i-battery.html
Hello, I hope you can help me.
I have a rooted Runbo Q5S Smartphone and after flashing a new firmware with CWM Recovery
the phone doesn't boot anymore.
When I press the Power Button the Display flashes one time, then the display is dark for about 10 secs, then it flashes again and so on.
I can't get into cwm recovery with Power+Vol up or factory mode (Power + Vol down).
Is there any chance to get it back to life?
You need to install the stock firmware. It is a complicated procedure.
However, you need the firmware for the Q5S. There is an improved version of the firmware from a russian forum .
Follow the instructions in the manual above, see if that works. If it doesn't, the phone is lost. If it is still in warranty, you could send it to the manufacturer and pretend that this wasn't your fault and that it is a defective unit,they might give you a new one. I would post the links, but XDA won't allow me. Good luck!
hello. I need your help please. I was updating my htc m8 at&t with android 4.4.2, so i donwloaded this updating in my pc"RUU_M8_UL_K444_SENSE60_MR_BrightstarUS_WWE_3.28.1540.5_Radio_1.21.21331147A1.19_2G_20.63.4196.01_release_394319_signed_2" I proceeded to install frowm my pc, everething was going good when suddenly appeared a window saying sometihing like ,there is incompatibility, so the updating was canceled.
now my phone doesn't work, just appears a white display with the logo of htc and then restarts two times with the same situation, the third restar appears a black display with a phone in the middle and into of this there is a exclamation mark"!".
I can go to android system recovery but i dont know what to do.
my phone is with s-off and I used the software "all in one kit" to make root, bootloader,flash TWRP 2.7.0.2,put super cid.
please like you see iam dont know these , just iam a common user. please try to explain with apples because iam noob in that.
sorry for my english but my first language is spanish.
thanks.
OK. The RUU you flashed was for the developer's world wide edition M8 not the AT&T model. You need to download this RUU:
1.58.502.1 full RUU is posted here -- http://dl3.htc.com/application/RUU_M...0_signed_2.exe
First you need to be in fastboot mode to run this RUU. Here is how:
1. Power off the smartphone completely. – make sure that it is not connected to your PC.
2. After several seconds with the phone turned off you should press Power and the volume down key at the same time.
3. After the device powers on you need to continue to hold the Volume Down key. This will load the Bootloader Mode of your HTC One M8 and you can release all buttons. – note that this might be trickier than you would normally expect, so you may have to try several times to get it right.
4. Use the Volume buttons to select FASTBOOT option.
5. Connect the phone to your computer. You should see the phone go from Fastboot to Fastboot USB
Now run the RUU you downloaded from the link above.
Hope this works out for you
thanks
Thanks a lot! i love you man! Well I supose that i going to wait until at&t launches lolipop. I am afraid to broke my phone again.
Thanks again!
Hello guys.
Hoping on your truly support. Have the problem, which cannot solve by myself.
Was trying to flash boot.img from CWM recovery 6.0.3.0 via fastboot. It flashes succesfully, but after rebooting the tablet it doesnt show any signs of life. Was trying EMMA for solving , Flashtool to change kernel, but when plug it through usb, it haven't launched and PC don't recognize any device connected. When i press Vol+ Vol- Power at the same time LED lights with white 3 times and that all.
Was using rooted Lollipop 5.1.1 with unlocked bootloader.
Is there any possibility to reanimate it or its finished totally.
Regards.
Edit.
Many thnx 2 Alok Bajaj for his solution:
Here's what you can do..
Press and hold the Power button and the Volume Up button for ten seconds until you see a white light flashing three times. While doing this somewhere around in 5 seconds you'll see white led flashing once, but keep on pressing those buttons till it flashes next three times.
After that your tablet will be turned Off.
You can put your device in flash mode and flash a new ROM from Xperia flash tool.
If you get the error "Unknown sources and USB debugging must me enable for flash mode, then your option can be to flash the ROM from fastboot.
Download a ROM (CyanogenMod or any with custom recovery).
Flash the boot.img via fastboot and reboot your device.
Once done you should see a led lit up while the device is booting (pink/magenta color in case of CyanogenMod).
Press the volume up/down button and you should be able to go to recovery mode.
From here you can recover your device easily
And before you do anything make sure you've charged your device well.
Good luck
Cheers mate!
hi,
thanks for the tutorial, I try it but*don`t see the second three blue blinks how long usually*takes to wait for them
Hi there! I think I have hardbricked my tablet (SGP321) too. The thing is, mine won't start, no matter what I press and do. If I press the power button it blinks white and if I press the UP button with it, it blinks three times. After that nothing happens. If I connect a USB to it, it just flickers first red and then green. And thats it.
I tried to flash [7.1] CyanogenMod 14 [POLLUX/POLLUX_WINDY][UNOFFICIAL] by CaHbKaUp and chose the Pollux Version from this thread http://forum.xda-developers.com/xperia-tablet-z/general/rom-cyanogenmod-14-t3496758. I also flashed the recommended GApps.
I whiped the sd-card in recovery (twrp) first and then flashed the new rom and GApps.
I think I chose the wrong version, maybe? I flashed my tablet once and I thought I could do it again, the same way as before. Guess I was wrong.
If there is anything I can do to get this back to work, please respond!
with regards
PsyPax
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Hardbrick too
PsyPax said:
seems like no one is looking at this thread anymore.
edit: Solution found. forgot to unlock bootloader... ^^;
Click to expand...
Click to collapse
Just ran into the same problem. So there are stil people looking
Didn't know about the bootloader.
Has Android 5.1.1 Stock rom,
rooted it
installed XZDualrecovery from here:
https://forum.xda-developers.com/showthread.php?t=2261606
Then it showed up twrp and I flashed lineage-14.1-20170417-UNOFFICIAL-pollux.zip
ticked "reboot" and ??? nothing
So what are the steps now to get it running again?
baarbaar said:
So what are the steps now to get it running again?
Click to expand...
Click to collapse
Reflash device with Flashtool.
You can't flash custom ROMs with XZDR recovery.
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
i have tried it but there's no light. I think it's dead :crying:
@Karl Einstein, have you tried both ways as suggested above?
Maybe you can examine what usb device appear (if any) in each of the described modes (tried to enter flash mode, tried to enter fastboot mode, tried to just plug the phone to usb without holding any button from power off state).
What happens if you try to enter recovery mode (twrp) - having your phone powered off, without usb connection, holding volume down and power, should enter twrp if you had it flashed before.
Do you get any vibration when hold the power button and.volume.key.up?
Karl Einstein said:
Hello guys, i have sony xz1 g431, i bricked my phone when i try to install another rom of another device via twrp. Now my phone no light when connect to pc, no light when charging, flash tool doesnt recognize my phone. When i connect my phone to pc it only shows QUSB_BULK on my pc. I think it lost fastboot or something. I try hold down button, up button or both when connect to pc but still no light and nothing happen.
Please help me fix this problem or atleast some good suggestions to solve this problem. I will really happy for that. Thanks :crying:
Click to expand...
Click to collapse
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
TimCrownie said:
Well...I think your phone is dead...I'm really sorry to say that, but in this case, that is the only reasonable explanation.
Yesterday I flashed the GSI image, then tried to flash to eXistenZ, it just stuck in the startup interface. However, it can still enter flash mode and fastboot mode, I have no choice but to use the newflasher to re-flash the firmware, it will return to normal.
In general, Sony devices are hard to change bricks, unless the phone is a Japanese carrier's custom phone (generally can not unlock the bootloader, and can only flash some firmware).
I have seen users who have flashed CE firmware for the docomo version and then can't enter flash mode and fastboot mode.Unlike your device,her phone is totally dead...It can't be charged, and there is no prompt to connect to the computer.
If you can buy a motherboard from eBay or somewhere else,you can disassemble your phone,then replace the old motherboard.
Hope these helps.
Click to expand...
Click to collapse
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
I had the same issue before on my lenovo p2 it lost fastboot and download mode but the PC detect it as qusb bulk then Qualcomm USB h9008 I searched all solutions but no good I think it needs some kind of box to push the modes or change the mother board. So I changed to Sony instead of repair it
Karl Einstein said:
Thank you guys for all your support. Finally i decided to skip this problem and i will buy a new device
Click to expand...
Click to collapse
Sad to ear that...
I had the same issue with my previous Htc10.
As it was still under warranty, I have had to contact HTC support and told them that and OTA bricked it.
They accepted the issue and replaced the motherboard.
I was BL unlocked, rooted and custom rom when it happened and no issue with support as they had no mean to prove it ?.
If still under warranty try to contact Sony support and tell them the same story... Ota bricks my phone ?
lilbrat said:
Just a side note , why flash existenz on a gsi rom... As it is made for stock Sony only or did I just misread something..
Click to expand...
Click to collapse
I've flashed eXistenZ before flash GSI in my phone. I thought GSI image would cover my origin ROM like eXistenZ, so after flash GSI image in,I flash eXistenZ again.
j4nn said:
Just have the phone powered off, hold just only the volume down button and while holding it, connect the phone to usb cable to your PC.
It should enter flash mode (green light), where you can flash stock firmware via newflasher (or possibly also via flashtool, but I do not use that).
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
If any of those modes are available, the phone should be possible to recover.
Click to expand...
Click to collapse
I have the same issue. My sony xperia xz1 G8342 got sudden dead. (Before dead, I remember I disabled "Developer Mode"). Now its not response by any mean except charging sign when i connect to Power source or PC. Xperia Flashtool shows "device connected with USB debugging disabled".
So, How Can I enter flash mode or fastboot mode? Is My phone recoverable? Please Help.
Thanks
Yesterday I was struggling with my XZ1 Compact and came across this thread that gave me some light to get my mobile phone back.
I guess it's way late for Karl now but just in case, I'm sharing my experience. I was working on my device to get LineageOS 18, as I'm a total newbie with roms I followed the different articles that were posted on Getdroidtips for this particular case: Unlocked bootloader, flashed TRWP and installled lineageos. But then I realized it would be good to have Google Play for restoring my files and apps, but when tried to reboot into recovery mode to get Gapps flashed, Black Screen Of Death started.
After that
with the phone plugged to the pc it wasn't recognized as a device (so adb or fasboot where useless)
the only thing the phone reacted to was to press and hold power + volume up (either for reset or power off)
but no matter what, next boot again BSoD
Tried the Xperia Companion but it prompted that repair was not possible as bootloader was unlocked.
Eventually found this life saver
j4nn said:
If you have the phone off, hold volume up button while connecting to usb, it should enter fastboot (blue light), which also may be used for some recovery, if the phone has been unlocked (or for the unlock itself).
Click to expand...
Click to collapse
From there, using fasboot I could reboot the device back with the LineageOS. I was still having issues with recovery boot but I'll post that on a different thread.
Thanks again to everyone for sharing thoughts and tips!