Q&A for [2014.05.01][ROOT] Mobile ODIN v4.20
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
flash kernel to be used for mobileodin for s7582 duos 2
@Chainfire please add flash kernel for s duos 2 7582
It does not detect my external sdcard on my galaxy s2 i9100m
s7582 Duos 2 :/
plz add the support for s7582 Duos 2 :/
ql,thanx
DUMP FILE
I upload the attachment a dump file for compatability to use mobile odin pro on my SAMSUNG GALAXY TAB 3 8.0 LTE
MODEL: SM-T315
s7582
@Chainfire
please add support for s7582 galaxy duos 2
Hi,
I have a rooted SM-G900F (Galaxy S5).
Today, my phone download an OTA update to go from PDA: G900FXXU1ANG9 CSC: G900FOXX1ANG5 MODEM: G900FXXU1ANG8 to PDA: G900FXXU1ANJ1 CSC: G900FOXX1ANJ1 MODEM: G900FXXU1ANJ1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The file size is an update.zip of about 95Mo in /Cache/Fota.
Can i use Mobile Odin Pro to update this "OTA Update" ?
If yes,
Do I need to open Mobile ODin Pro and browse this file from menu "OTA / Update Zip" or from "Open File" ? (copying the file from /Cache/Fota to a folder than Mobile Odin can see)
Or do I apply this update by clicking on it (see capture) and then mobile Odin Pro will detect it and apply it itself preserving Root rights ?
Regards
Please support the note 10.1 2014 (sm-p905)
I have the dump file attched. I will not lose root. After the last
DBT update. Please help me.
Help please. I have a i9505 and my baseband is xxufnc4 I try to use mobile Odin pro 4.2 to flash combined LTE and gsm modem xxugne8 yet my baseband remains the same. Please help as I desperately need this fixed thanks in advance
Sent from my GT-I9505G using Tapatalk
Galaxy S4 Value Edition Latin GT-i9515L - dumped file
Chainfire, if it could help you, here's dumped files for the Galaxy S4 Value Edition Latin version (GT-i9515L). As all says, many thanks for all your efforts in your works!
Please add support for SM-T520
Here is a dump from my SM-T520
Thank you!
G900H dump
Attached below is a dump made by Mobile Odin on Galaxy S5 G900H. I hope it will be useful. Thank you for your work, sir.
mobil odin
I have purchased this from Google store and I need help.
My mobile odin says device not supported, generate a dump file this will take 30 ninites. Any help??
---------- Post added at 02:13 PM ---------- Previous post was at 02:08 PM ----------
I have T-Mobile. Samsung note 4.
upinsmoke7610 said:
Help please. I have a i9505 and my baseband is xxufnc4 I try to use mobile Odin pro 4.2 to flash combined LTE and gsm modem xxugne8 yet my baseband remains the same. Please help as I desperately need this fixed thanks in advance
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
+1
Is it possible to update bootloader for i9505 with a file .tar? I tried to open the file with "open file..." but it doesn't recognize it.... Any suggestions please???
Update: i tried to flash only modem and after reboot it doesn't works, i didn't see all information but something like "MEMORY PROTECTION IN PLACE!! try triangleaway to fix this problem" but when o tried triangleaway it says to be warning if I don't run a stock samsung firmware under i9505. I use cm11.... Any solutions please?
hello
you can support for Samsung Galaxy S3 Neo (GT-i9301)
thanks
Is there a way to show the zips in my directory on mobile odin because I am trying to unroot my galaxy s3 and it wont show the stock firmware zip that I need but I see it in a regular file manager. Can anyone please help? Thanks a lot.
Dump from Galaxy S4 Mini Duos
I installed Mobile Odin and as expected, my device isn't supported. It asked me to take a dump of the phone, so it's herewith attached. I hope the phone gets support soon. Thank you.
Please help!!! Second fhone is crashed!
Hey This is the second Time this has happened once with a galaxy s4 19505 and now with a brand new Galaxy - Samsung Galaxy S5 Oceania SM-G900I. I install odin mobile and then it reboots and now Im stuck with two samsung load screen and I cant get past them! Please PLEASE is there a recovery for these What do I have to to do to just make them work. Please help me
If i downloaded a firmware (Android L from Sam mobile) usin Mobile odin, will it be rooted already using the EverRoot thingy?
Related
i want to root my Samsung galaxy note (SHV-E160L) Korean Model
i am currently on android 4.1.2 version install and i check this
http://forum.xda-developers.com/showthread.php?t=1924535&nocache=1
but on this there is no kernel and recovery for my Base bend version
i am check this also but i am not get it
http://forum.xda-developers.com/showthread.php?t=2154790
so how to root the phone?
i want to get Full 160 Char message support on this.!!!!
check the Image for Information!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thank you in advance
I would recommend trying the Mottochopper root exploit http://forum.xda-developers.com/showthread.php?t=2252248.
Sent from my SCH-I535 using xda premium
shimp208 said:
I would recommend trying the Mottochopper root exploit http://forum.xda-developers.com/showthread.php?t=2252248.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
i want to root the samsung galaxy shv-e160l
not Samsung galaxy S4!!!
you give a link for s4
android beginner said:
i want to root the samsung galaxy shv-e160l
not Samsung galaxy S4!!!
you give a link for s4
Click to expand...
Click to collapse
The exploit is posted in the Galaxy S4 forum but is a universal exploit for devices such as your Korean Galaxy Note that use Qualcomm processors.
Sent from my SCH-I535 using xda premium
urhacked said:
http://urhacked.biz/entries/tutorials/how-to-root-any-android-device
Click to expand...
Click to collapse
i want more info. the link which you give it is for all common rotting ..i want only for SHV-E160L model Only!!!!!
shimp208 said:
The exploit is posted in the Galaxy S4 forum but is a universal exploit for devices such as your Korean Galaxy Note that use Qualcomm processors.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
can you help me in this process
http://forum.xda-developers.com/showthread.php?t=2154790
i reached at ADB stage but it shows me Device drive is not install so what should i do now..???
i search online driver and as well as i run the check for update (Windows Feature) but no Response .!!
please Help!!!
android beginner said:
can you help me in this process
http://forum.xda-developers.com/showthread.php?t=2154790
i reached at ADB stage but it shows me Device drive is not install so what should i do now..???
i search online driver and as well as i run the check for update (Windows Feature) but no Response .!!
please Help!!!
Click to expand...
Click to collapse
i already installed kies software which is install the SHV-E160L Driver and i am transfer file from my pc to note but after
the rebooting it will pop up said that found new hardware and after that not success... so it will show Device Not found!!!
so what i have to do???
android beginner said:
i already installed kies software which is install the SHV-E160L Driver and i am transfer file from my pc to note but after
the rebooting it will pop up said that found new hardware and after that not success... so it will show Device Not found!!!
so what i have to do???
Click to expand...
Click to collapse
Make sure you install the ADB drivers for your device from the Samsung website. Here is the link to the page for your Korean Model of the Galaxy Note(The page is in Korean) in the download section there should be a link to the correct usb drivers for your device that you can install.
Help
@darkspr1te Please Look at this thread and reply please help..
shimp208 said:
Make sure you install the ADB drivers for your device from the Samsung website. Here is the link to the page for your Korean Model of the Galaxy Note(The page is in Korean) in the download section there should be a link to the correct usb drivers for your device that you can install.
Click to expand...
Click to collapse
can you please give me the direct download link to the ADB driver for SHV-160L i search on the samsung web site but not found and
i try below two also but it is not working...
http://www.crayden-group.co.uk/secure/galaxy_note_drivers.zip
http://secure.tinyserve.com/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
android beginner said:
can you please give me the direct download link to the ADB driver for SHV-160L i search on the samsung web site but not found and
i try below two also but it is not working...
http://www.crayden-group.co.uk/secure/galaxy_note_drivers.zip
http://secure.tinyserve.com/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Click to expand...
Click to collapse
I would recommend taking a look at this Samsung USB driver, it is the most up to date version of the USB Drivers for Samsung devices.
android beginner said:
can you please give me the direct download link to the ADB driver for SHV-160L i search on the samsung web site but not found and
i try below two also but it is not working...
http://www.crayden-group.co.uk/secure/galaxy_note_drivers.zip
http://secure.tinyserve.com/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Click to expand...
Click to collapse
Adb can be found in my brickfix package in the ADB folder.
http://www.sendspace.com/file/1s0g60
do not use any of the other tools in the package as they are designed for bricked devices.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INFO:
Odin is the ROM Flashing Tool for SAMSUNG smartphones. ROM files flashable with Odin come with .tar extension.
Most of the ROMs you are going to flash with Odin are the official stock Samsung ROMs (or leaked stock ROMs). Custom ROMs are rerely flashable by Odin because they come with .zip extension that Odin does not recognize (it recognizes .tar files).
Custom kernels, however, are sometimes provided in .tar format by their developers (e.g. CF-Root kernels), so that they can be flashed by Odin. When your phone is new and running official firmware you most often cannot flash a custom ROM to it because a Samsung phone often requires a custom recovery and root rights that are included in a custom kernel to be able to flash custom ROMs. That's why Odin often comes in handy in rooting and flashing a custom firmware to your phone because you (often) can flash a custom kernel with it that already includes root and custom recovery and enables you to flash custom firmware (custom ROMs). I use the word "often" very frequently in the previous sentence because every Samsung smartphone is different and requires various procedures for rooting it and flashing custom ROMs (see the section about using Odin below).
If it comes to stock ROMs, the best source of stock (official) Samsung ROM files is located at this excellent website: SamMobile.com/firmwares (link). It requires registration (it's free) and I encourage you to set up an account there because you will most likely use this site several times during your stay at XDA. You will most likely come across 1 .tar or 3 .tar file ROMs there, flashable by Odin. Refer to the Odin flashing guide below for more info.
Below in this thread you can download Odin v3.09, v3.07, v3.06, v3.04, v1.85, v1.83 and all important versions of Odin Multi Downloader.
However, bear in mind that not every Samsung smartphone can be flashed using any Odin version. In fact, for every Samsung smartphone there's a specific Odin version compatible with it. Please refer to the tables below to learn which Odin version is compatible with your phone!
To use Odin with ANY Samsung phone you first need to properly install latest Samsung USB Drivers for Mobile Phones. You can download the drivers in this thread (link). They work for all Samsung smartphones. In that thread there is a full guide on installing the drivers on Win 8/7/Vista/XP x86 & x64.
Click to expand...
Click to collapse
Download:
Code:
[COLOR="Red"][B][SIZE="3"]Mod Edit – Some content removed [/SIZE][/B][/COLOR]
Please say thanks.
Is there allowed to change the window size? I always had a problem with the size of the window on my PC
Sent from my GT-N7100 using xda premium
peter-marvel said:
Is there allowed to change the window size? I always had a problem with the size of the window on my PC
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
This latest version had many improvements but i still doubt the resizing.
You can check yourself though.
What exactly is new in this?
iPTPenguin said:
What exactly is new in this?
Click to expand...
Click to collapse
Button AutoStart
Display Binary Size
Branding button Bootloader, PDA, and Phone to BL, AP, and CP
john3166 said:
Button AutoStart
Display Binary Size
Branding button Bootloader, PDA, and Phone to BL, AP, and CP
Click to expand...
Click to collapse
Thanks
Your welcome mate !
&
on my 150th post, i'll be giving unlimited free web hosting account to whoever posts next !
I'll try this version, thank you mate
Can't wait to try it... Just got my new Note II...still stock
I see your post count is 150... do i get hosting account?
Sent from my GT-N7100 using xda app-developers app
Yea but this offer was for the poster above you ^^
Best tool to flash recovery for me.
Thanks
Sent from my GT-I9300 using XDA Premium 4 mobile app
Your welcome guys !
I'll add more mirrors soon.
thankyou for the latest version. i have been looking for this.
I check virus from Dr.web.
So bad !
Checkingdin3_v3.09_2.rar
Engine version:7.0.5.6250
Total virus-finding records:4503189
File size:1.15 MB
File MD5:974b9ac8f1316cfde37b58a376270d2d
Odin3_v3.09_2.rar - archive RAR
>Odin3_v3.09_2.rar/Odin3_v3.09.exe - archive RAR
>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/Odin3v3.09.exe - Ok
>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe - archive NSIS
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/script.bin - Ok
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Biyulunu.uki packed by XOREXE
>>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Biyulunu.uki infected with Trojan.PWS.Multi.1145
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Fimohara.dll packed by FLY-CODE
>>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Fimohara.dll - Ok
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Hojifagije.dll packed by FLY-CODE
>>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/Hojifagije.dll - Ok
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/jojihedaca.dll packed by FLY-CODE
>>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/jojihedaca.dll - Ok
>>>Odin3_v3.09_2.rar/Odin3_v3.09.exe/rar.exe/_=9A=80\System.dll - Ok
>Odin3_v3.09_2.rar/Odin3.ini - Ok
avira virus alerts
Updated the thread.
Mirror Added.
Virus Alert.
Don't download.
Seriously ?
Working fine in Win8 x64
Seriously ?
Working fine in Win8 x64
Reuploaded the files to mediafie.
Q&A for [2014.01.15][ROOT] TriangleAway v3.26
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Thanks for your great work.
OTA update of S4 (i9505) doesn't work despite using Triangle Away
Hello there!
I'm trying to update the rooted stock firmware of my Samsung Galaxy S4 (GT-i9505) over the air (OTA) but I get the "Your software has been modified" error.
I have installed Triangle Away v3.26 from the Google Play store.
When in Odin mode my phone reads:
ODIN MODE
Product name: GT-I9505
Current binary: Samsung Official
System status: Official
Knox kernel lock: 0x0
Know warranty void: 0x1
CSB-Config-LSB: 0x30
Write protection: Enable
eMMC burst mode enabledCan you please help me? Thank you!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Triangle Away SGH-I467 ATT
I have a rooted ATT Galaxy Note 8.0 SGH-I467 it has Android 4.2.1 on it and I am not able to install the new update that came out since my device statuse states that it is a custom rom install. I tryed using Triangle Away to reset and came up with an error "Can Not Read The Header" attached is the zip file that it created.
Can anyone please help me out on this?
Triangle away on S4 mini I9195
You could tell me if this application works in s4 mini? Thank you
glauc0 said:
Can anyone please help me out on this?
Click to expand...
Click to collapse
I'm afraid that there's nothing that can be done for you.
The OTA update is failing because you've tripped the Knox warranty flag. Nobody has managed to find a way to reset this flag - one it's set, it's there forever.
If you want to upgrade your firmware, you'll need to do it manually with Odin. Ask in the I9505 section of the forums for info on how to do this.
Thank you for your informative answer. I don't even know what this whole knox thing means, but I'm going to look it up!
GT-I9506 Confirmed
Hello i testee this app on my GT-I9506 LTE-A an dit works perfect
Triangle-Away-3.26 is not working for 19500 phone
Hi,
I have installed Triangle-Away-3.26 and looks like its not able to the job and it said create a dump and upload it here for help.
I have the root and the phone is i9500
Any help is greatly appreciated.
Thanks,
TriangleAway erase my phone memory (no SD card) why ?
I have samsung Galaxy S2
Wysłano z Walkman-a
Galaxy Fame Duos GT S6812B
I have tryied to use the triangle away, but all that I get was a zip file.
Can help me ?
Problem
Not work in my Ace 3 GT-S7270l
Please support knox security if it is possible
I have a Glaxy s5 but I can't reset warranty counter because triangle away doesn't support the new security system of samsung please find a way to reset it if it is possible.
saibose said:
Hi,
I have installed Triangle-Away-3.26 and looks like its not able to the job and it said create a dump and upload it here for help.
I have the root and the phone is i9500
Any help is greatly appreciated.
Thanks,
Click to expand...
Click to collapse
The I9500 will never be supported by TriangleAway.
Samsung have added write protection measures to the bit of memory where the flash counter is stored, and nobody has figured out a way to get around this. In other words, it's possible to read the current flash count but impossible to change it.
If you want more info, search the development thread. The original info was scattered through the thread, but there's a post by me that quotes all of the relevant bits. That should hopefully answer any questions.
NZgeek said:
The I9500 will never be supported by TriangleAway.
Samsung have added write protection measures to the bit of memory where the flash counter is stored, and nobody has figured out a way to get around this. In other words, it's possible to read the current flash count but impossible to change it.
If you want more info, search the development thread. The original info was scattered through the thread, but there's a post by me that quotes all of the relevant bits. That should hopefully answer any questions.
Click to expand...
Click to collapse
Thanks for the update.
Please let me know if there way I can sim unlock this phone. I have done all the possible ways to do it but looks like its not working.
I have used GSM sim unlock ,RegionLock away apks but nothing helped to resolve the issue.
saibose said:
Please let me know if there way I can sim unlock this phone...
Click to expand...
Click to collapse
That sounds like a question for the I9500 Q&A section. This thread only deals with TriangleAway.
on my girlfriend's sg-i9515 reset flash counter not reboot the device..
if i reboot manually, the counter always show 1... i have stock rom with cf-autoroot (sg-i9505) flashed with odin..
hoping this help
TriangleAway for SM-N910C
Hello, xda community, i rooted my new note 4 and i want to reset couinter. How should i do this? I tried to run triangle away, but it didn't helped, counter is still at 1. Any suggestions?
I9500
I have I9500 version of samsung galaxy s4 and here is my dump file.
Mod Edit links removed
so how the step
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
JH97 said:
Can't open any samsung-updates.ru link, is the site down or something? Where else can I find my device (J500M UD [Mexico]) firmware?
Click to expand...
Click to collapse
sammobile.com/firmwares?
Galaxy J5 (2016) firmware online, should launch in Europe and other markets soon
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
reus11 said:
I downloaded my firmware from sammobile.com, it doesn't install the russain things like the links above do,
But I am a noob so i would just like to know is there anyway to verify if the download is working and is there no MD5 and SHA Checksum Utility code for it like there is for a custom rom? And one last question what is the difference between XFE and XFA? I know XFV is Vodacom.
Click to expand...
Click to collapse
Hi,
Not sure the difference between XFA & XFE; there really was none that I could see. I have installed both those versions before, as well as United Emirates, Russian, Iraq etc. versions , and they all worked on the South African network (Vodacom). Some just have extra user apps, and newer modems for the phone eg. L1, L2, PB2...
Hey Friends,
can anyone give me download link to CM12 for this device?
Greets Mark
Need Pit file
Hi !
Please help me ! I need pit file for J500FN. After flashing soft with Odin phone restarts to Recovery and have multiple red information "Can't mount", "Can't open" etc.
Something like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here u R.. just created from my J500FN
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Happonee said:
So I have a big problem.I flashed twrp recovery on my galaxy J500FN and now I am stuck on recovery.I know flashing stock with kies should fix it,but is there a way to fix it without losing twrp because I would like to have custom recovery.I have tried many things,but when I boot,it always goes to recovery.:crying:
Please help a n00b
Thanks.
Click to expand...
Click to collapse
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I am not sure.I try to flash v3 now.
---------- Post added at 04:11 PM ---------- Previous post was at 03:54 PM ----------
jdstrydom said:
Did you flash v3 as in the OP? There was an issue a while back with an older 2.8.7 that did that, but it was fixed a while ago.
Click to expand...
Click to collapse
I flashed v3 and now it works!Thank you for helping
(sorry for being n00b)
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
i thought this, too. right after plashing xposed, but the first bootup just needed 10-15min.. weird
I need a ROM Persian language j5008
please help
Hi, just wondering wich one this is
LMY48B.J5000FNXXUAOJ2, found several J2 versions but dunno wich one.
Have tried to Google it.
Regards Jonny
Hi guys,
Do you know if firmware with FRENCH exists ?? If yes, can you give me the product code ? Thx !
Br
gelmarkliao said:
Hello guys, so im stucked on bootlogo(bootlooped) where i've just flashed the xposed-v72-sdk22-arm.zip and when i started to reboot my phone, it suddenly happened. Hoping that someone could help me out with this. and btw, if ever i wanted to flash for another stock firmware which i am at, do i still need to delete my system,data,cache something like that before flashing the new firmware? Thanks and more power xda developers.! *cheers*
Click to expand...
Click to collapse
Don't worry, I have had that problem too many times too. It's very easy.
First of all, flash xposed Uninstaller file.
Next, it is possible you lost root in the process. Use chainfire root method to reroot the phone. Now flash twrp 3.0.0 to get a custom recovery. After that, download xposed framework v79. 1 (custom built by wanam for Samsung lollipop devices). Don't download any other version but v79. 1. I have noticed that my j500f only supports xposed v79.1 and it works fine. There is no need to flash the stock rom again. Just reroot and flash twrp. Then flash xposed v79. 1. Alternate way that I have flashed xposed is using Flashfire application. It works way too well. Give it a try. It's a beast of an application.
Goodluck!
Sent from my SM-J500F using XDA-Developers mobile app
hi, wanted to ask whats the latest baseband for the s3 international i9300, where to find it and whats the best way to install it.
currently have i9300xxugna8.
found a thread that mentioned I9300XXUGPE1 but wasnt sure if its really the latest.
ty
Did you read the stickies at the top of the page, specifically this one?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your question belongs in the QUESTIONS AND ANSWERS section, not the DEVELOPMENT section.
I have moved your thread.
Please, respect the Forum Rules that you agreed to follow when you joined XDA.
Thank you.
V0latyle said:
Did you read the stickies at the top of the page, specifically this one?
View attachment 5858147
Your question belongs in the QUESTIONS AND ANSWERS section, not the DEVELOPMENT section.
I have moved your thread.
Please, respect the Forum Rules that you agreed to follow when you joined XDA.
Thank you.
Click to expand...
Click to collapse
thank you. please excuse.
so i have found this archive that shows several latest firmwares but im still confused about what is the latest one and which components do i need. some files are labelled as bin. ive opened the zip and i take it what i need is the modem and eventually the bootloader. these files are tar.md5. can i flash them with odin?
Samsung GT-I9300 Galaxy S3 - Sfirmware.com
Download the latest version of Samsung firmware GT-I9300 for your region for free. Please go to the firmware download page.
sfirmware.com
wack.galaxy said:
so i have found this archive that shows several latest firmwares but im still confused about what is the latest one and which components do i need. some files are labelled as bin. ive opened the zip and i take it what i need is the modem and eventually the bootloader. these files are tar.md5. can i flash them with odin?
Samsung GT-I9300 Galaxy S3 - Sfirmware.com
Download the latest version of Samsung firmware GT-I9300 for your region for free. Please go to the firmware download page.
sfirmware.com
Click to expand...
Click to collapse
Yes. Please search before posting, these questions have been asked and answered many times before.
V0latyle said:
Yes. Please search before posting, these questions have been asked and answered many times before.
Click to expand...
Click to collapse
thank you. ive searched for hours but didnt find an answer. thats why i had to post a question.
wack.galaxy said:
thank you. ive searched for hours but didnt find an answer. thats why i had to post a question.
Click to expand...
Click to collapse
[GUIDE] How to use ODIN for dummies
I didnt find any step-by-step tutorials about this on xda, which is kind of weird and because i have spare time and its 3:19am I decided to make this tutorial :) EDIT: If you are coming from eclair, install a froyo ROM and make sure it has a...
forum.xda-developers.com
V0latyle said:
[GUIDE] How to use ODIN for dummies
I didnt find any step-by-step tutorials about this on xda, which is kind of weird and because i have spare time and its 3:19am I decided to make this tutorial :) EDIT: If you are coming from eclair, install a froyo ROM and make sure it has a...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks. i found out that my current
baseband is I9300XXUGNA8
bootloader is I9300XXUGNG3
and ap i suppose is I9300XXUGMJ9.
i realized though that there are different revisions even of the same bb, csc, bl and ap.
device fingerprint: m0xx/m0:4.3/JSS15J/I9300XXUGMJ9
product code: GT-I9300MBDDBT/EU
because some time ago i installed this and its still running / active in the background with its low rev. bb, bl, csc and ap:
Exclusive: I9300XXUGMJ9 – Android 4.3 Jelly Bean leaked firmware for the Galaxy S III
After leaking Android 4.3 for the Galaxy S4 and the Galaxy Note II, we finally managed to obtain a test ...
www.sammobile.com
now currently im running latest twrp and ressurection remix 5.8.5 20171217 i9300 final or some lineage os 14 / 19.
the phone is kind of running ok, everything is working.
would it be possible to flash everything back with odin to the latest official fitting firmware, which is this one:
GT-I9300 | Samsung Galaxy S3 | PDA/AP Version: I9300XXUGNG3 | Firmware for Region: DBT from GERMANY | ID - GT-I9300_DBT_1_20140823111010_b9bf686v1d_fac - Sfirmware.com
Samsung GT-I9300 Download the latest version of firmware | CSC Version: I9300DBTGNG2 | Firmware version: I9300XXUGNG3 | DBT | ID - GT-I9300_DBT_1_20140823111010_b9bf686v1d_fac - Fan club Sfirmware
sfirmware.com
and then install custom rom and recovery over again?
would it be worth it or make any sense because im wondering since everything is still running off this leaked version in the background that seems to not be really uptodate / have lower revisions.
does the pa even have any impact when a custom rom is running?
think i found what i needed:
[Q] [SOLVED] How to update baseband version from Custom ROM?
{Guide}{I-9505} How to flash baseband (modem) and Bootloader in Odin