Related
I bought my Atrix not too long ago and it came with android 2.2.2 and fully upgraded. Anyways I searched all over the forums and google and found nothing.
I followed these steps shown in a guide at briefmobile but the flash always fails because mine shows up as "SE Flash Olympus" and not "NS Flash Olympus". Does this mean I cant unlock the bootloader to instal 2.3.4? or is there something I'm doing wrong?
In the early atrix days it was rumored that NS meant non-secured and SE meant secured. Sadly, all our devices were indeed running a locked bootloader. Perhaps try flashing pudding , the preinstall sbf or the hktw leak? Maybe in your case you have an unlocked device already (not really i guess but your phone is different)
It looks like you're right. My phone has already been unlocked. Thanks for the reply!
Sorry To Resurrect
I am in USA with ATT
I bought my Atrix 2 weeks ago
I downloaded the OTA upgrade so I was running 2.3.4 from ATT
I downloaded the FULL 2.3.4 SBF and RSD Lite from the development thread
http://forum.xda-developers.com/showthread.php?t=1136261
When flashing the SBF my process FAILED to flash and I now have the following message locked on my phone's screen (See abbreviated screen below):
SVF 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD Mode
.
.
.
Starting Fastboot Protocol support
What happened and can i save my phone?
FIXED
zetaex said:
I am in USA with ATT
I bought my Atrix 2 weeks ago
I downloaded the OTA upgrade so I was running 2.3.4 from ATT
I downloaded the FULL 2.3.4 SBF and RSD Lite from the development thread
http://forum.xda-developers.com/showthread.php?t=1136261
When flashing the SBF my process FAILED to flash and I now have the following message locked on my phone's screen (See abbreviated screen below):
SVF 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD Mode
.
.
.
Starting Fastboot Protocol support
What happened and can i save my phone?
Click to expand...
Click to collapse
I was able to fix this issue.
I chose FASTBOOT during the the first 5 seconds of the boot up.
I pressed UP on the rocker switch to activate FASTBOOT mode
I UNLOCKED the bootloader
I loaded the recovery image
I loaded AURA custom ROM...
phew... hardbrick avoided...
zetaex said:
I was able to fix this issue.
I chose FASTBOOT during the the first 5 seconds of the boot up.
I pressed UP on the rocker switch to activate FASTBOOT mode
I UNLOCKED the bootloader
I loaded the recovery image
I loaded AURA custom ROM...
phew... hardbrick avoided...
Click to expand...
Click to collapse
Did you have the usb debugging on and what usb mode were you own?
Sent from my MB860 using XDA App
supermerkin said:
Did you have the usb debugging on and what usb mode were you own?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Debugging was enabled and I was set to "None" for the USB mode.
THANK YOU!!!
zetaex said:
I was able to fix this issue.
I chose FASTBOOT during the the first 5 seconds of the boot up.
I pressed UP on the rocker switch to activate FASTBOOT mode
I UNLOCKED the bootloader
I loaded the recovery image
I loaded AURA custom ROM...
phew... hardbrick avoided...
Click to expand...
Click to collapse
Your notes on how you fixed this saved my phone (and my sanity!) Thanks for taking time to post it.
Note, what I used to unlock and load the recovery image is on atrix4ghacks (it won't let me post the link) but it is labeled How to Unlock Bootloader and Install Permanent Recovery!
Looks like it lost everything and reverted to 2.2.2 but that's much better than a brick any day
kiri_9 said:
Your notes on how you fixed this saved my phone (and my sanity!) Thanks for taking time to post it.
Note, what I used to unlock and load the recovery image is on atrix4ghacks (it won't let me post the link) but it is labeled How to Unlock Bootloader and Install Permanent Recovery!
Looks like it lost everything and reverted to 2.2.2 but that's much better than a brick any day
Click to expand...
Click to collapse
Why did we have to ressurect a dead thread? And this method has been covered extensively in the official how to thread many times.
Sent from my MB886 using xda app-developers app
If I flash back to the stock firmware using the motorola sbf files, will my bootloader remain unlocked? I flashed back and flashed the unlocking sbf file. When my phone booted up it said unlocked, even though I didn't run the fastboot commands. I then ran the fastboot commands anyway and it said the bootloader was already unlocked. So will the unlocked bootloader always remain unlocked?
No. It's locked again
Sent from my MB860 using XDA App
it stays unlocked... despite what ^^^ said >.>
but it wont show until you just flash the pudding sbf like you did
P.S. no known way to re-lock as of yet
xepter said:
it stays unlocked... despite what ^^^ said >.>
but it wont show until you just flash the pudding sbf like you did
P.S. no known way to re-lock as of yet
Click to expand...
Click to collapse
Ok, thanks. I wasn't planning on relocking, I was just curious. So next time I won't even have to flash the sbf? The sbf just makes the unlocking text show up when it boots up, but it should still allow me to do stuff like install the new CWM recovery without that, right?
Another thing, when I flashed that sbf, I didn't go into RSD mode. I was in a hurry and I forgot so I just ran the RSD program, and it detected my phone, so I clicked start. I realized later that I hadn't booted up into RSD mode...
Should I be worried? Was the RSD mode just an unnecessary precaution?
You can't relock..............it's a hardware unlock (fuse lock). When you unlock a fuse burns out, and that's end of story.
If you flash back to a different firmware the word "unlocked" will go away, but you are still unlocked. You can unlock again to make the word "unlocked" reappear on the boot screen.
EU sbf on AT&T possible?
I am going to use an unlocked AT&T Atrix in Europe.
I am on 1.83 firmware with root (made with gingerbreak to get rid of AT&T boot animation etc.).
If I go on with unlocking the bootloader, can I flash any european sbf/rom? Are there any simfree european tock sbf/rom-s out there, and which is best? What about the french 2.1.1 sbf?
I just need a stable stock firmware without the AT&T limitations, do not want changing roms all the time.
Also, do I get sw updates if I do this?
So Guess who got an Atrix today? me! Guess who also probably bricked their atrix today? me!
So here is what happened:
1: I have an unlocked, rooted Atrix 4G from AT&T running 2.2 1.5.7 I believe.
2: I wanted to flash some roms, so I so I attempted to flash tenfar's CWM, but that didn't work, it said install succeeded but I could not get into CWM ( I tried everything, believe me, I'm no noob)
3: I then attempted to flash CWM from Rom Manager and so I did and I flashed the Atrix version, I then hit boot into recovery from within Rom Manager.
4: What I got next is a screen that says "failed to boot 2, starting RSD mode", now I cannot get passed that screen when it powers up.
5: Worst of all, using MSU (moto sw update), it says device is connected but not what kind, meaning I can't restore it, probably because I had adb mode turned on previosly.
update: after attempting to flash a new SBF, the phone told me it failed because the phone did not re-enumerate. Now I have the same problem, but with a new error message on the boot screen: Battery to low to flash!
I have searched everywhere, now I need to resort to you, xda community, Thanks So Much!!!
If you can get into RSD , check to see if fastboot is an option. If you can get into that I would advise to start over by erasing recovery. Command is fastboot erase recovery, then flash romracers recovery thru fastboot. Once you have recovery reboot into it and flash any ROM like Alien, Aura whatever you like.
Alien Atrix
See the thing is, fastboot is not an option , it immediately goes to RSD mode. I may have found a fix, and I am now flashing a new SFB with rsdlite
That's another option, noticed you were on 1.5.7 so I would advise 1.8.3 fruitcake sbf. Make sure you battery is fully charged, if your battery gives out during sbf flash you will hard brick your phone.
Alien Atrix
while I was flashing the sfb, the device failed to reenumerate and now it gives me a low battery warning, with no way to charge it, regardless, I have a friend who will let me borrow his battery tommorrow then Ill try to flash again, really I should use the 1.8.3? I just tried to flash the 1.2.6, so Your saying its ok to go forward with a SFB flash? I come from a world of Samsung's so these are all new to me besides the time I had a backflip for a week (ugh).
Are you sure your unlocked the bootloader? If you successfully unlocked you would have unlocked on top right corner of boot screen and have fastboot also.
Alien Atrix
I'm not sure if I have there is nothing that says "unlocked" at the top of the screen, and I could previously access the recovery and fastboot before this. I did not get this phone new, it came from the AT&T dev center or something like that. My dad works there.
You need to charge the battery. I stripped an old USB cable down and used the red with the positive side of the battery and black with the negative using tape to hold them in place then inserted the battery in the phone and plugged the USB in the computer. This allowed me to flash a ROM and unlock bootloader. Etc.
Warning this could harm you're phone. If you cross the wrong wires or touch more then just negative or positive areas of the phone and or battery. Although I didn't have any trouble with it you might.
If in doubt do it the right way buy a battery charger for your battery, use someone's battery or phone to charge yours.
Sent from my MB860 using Tapatalk
Ok Im at my computer, If you are unsure of unlocked bootloader I now recommend you RSD either 1.8.3 with unlocker & preinstall or the newest is 2.3.4 with unlocker & preinstall read this thread about 3 times first http://forum.xda-developers.com/showthread.php?t=1136261
Unlock using fastboot, after you get phone to boot for first time, ADB commands for preinstall root, after root use Root Explorer app then delete "install-recovery.sh" @ /system/etc.
Now you are ready to install the newest recovery by Romracer 3.2, Tenfars is outdated and no support from the developer. Read this thread 2 times http://forum.xda-developers.com/showthread.php?t=1204500 I recomend flashing this recovery thru fastboot per Romracer.
Now you are ready to flash your choice of ROM, follow proper procedure to flash new ROMs thru Recovery.
Also check out the unlocked sim codes thread in general, unlock sim.
If I helped click the thanks button
what Im confused on is what exactly i should flash if I am stuck in a kind of RSD mode bootloop/soft brick?
On your first post you said you were on 1.5.7 correct?
Atrix first released with 1.2.6 then updated to 1.5.7 then updated again to 1.8.3
Bootloader was unlocked with the 1.8.3 update
I updated to 1.2.6>1.5.7>1.8.3 then followed this tutorial http://briefmobile.com/how-to-unlock-the-atrix-4g-bootloader[/UR
ok thanks very much! Ill get back to you later once I get a fresh battery.
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
iCracked said:
Ok so I'm about to flash the Pudding .sbf, am I doing this right?
Click to expand...
Click to collapse
yes, that's what you should have done in the first place. you can't do anything with "ROM" in its name without unlocking your bootloader which is why you're in this predicament. unlocked phone (maybe you mean SIM unlocked, free to use on any carrier) is not the same as an unlocked bootloader.
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
defnow said:
The title of this thread is epic. I lol'd.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
pukemon said:
Definitely laughed myself. I knew it was a 'i bricked my pants'.
I voided my warranty.
Click to expand...
Click to collapse
haha thanks guys, yes I am SIM unlocked and everything just said unlocked so maybe I thought the reason they where specific to carrier locking was the radios? haha but I was wrong
Getting the Failed to boot 3 error.
I've been working at this for days now trying to reflash an sbf image to the phone to no avail. Every single time RSDLite (5.6) gives me the error saying it failed to re-enumerate the device no matter which sbf file I use. I am running as admin, and have all the drivers installed. Any help on this would be VERY much appreciated. Any info you need, just ask.
Hows the charge on the battery.
Sent from my MB855 using xda app-developers app
Well, I keep trying to get it to flash so it runs out a lot but I have a battery charger and I periodically charge it for a few hours. There's no way for me to tell how much of a charge it has but I assume it's somewhere around 75%.
"SVF: 108: 1: 2
Failed to boot 3
Starting RSD mode"
is what is says on the phone.
Always gets stuck on "Waiting for re-enumeration" in RSD Lite.
I get this error:
Phone did re-enumerate after RAM downloader was sent. (0x703e). Phone connected.
This is not much info, we need to know, if you were unlocked, locked, what sbf did you flashed last before this, if you flashed some OTA update, or radio, which sbf are you flashing now, if you can boot into fastboot after this error, and anything, that you think might be important to know.
But if you didn't do anything special, first try redownloaing the sbf.
I never successfully unlocked my bootloader, and I think this is where the brick occured so as far as I know it is locked still. I never flashed any sbf prior to this, I was trying to install a different ROM (I don't like blur very much). As far as I know I am able to boot into fastboot (power + volume up button) and it says fastboot on my phone and when it is plugged into my computer RSD lite displays it as fastboot mode but I can't flash anything to it, it'll give me an error in fastboot. When I hold power + volume down, it says something about NVFlash which I believe is an NVidia tool except the phone just shuts off almost immediately after this. The SBF I am flashing is the Sprint 2.3.5 version, and I've tried downloading and redownloading it from about 4 different locations to no avail. I purchased an external battery charger so I can keep trying different things, so the battery is almost always at a 100% charge. As of now I believe the phone to be unrecoverably bricked, and it's pretty sad because I had the photon for all of maybe 10 hours. Safe to say I've learned my lesson about flashing non HTC devices. My EVO 4G was so easy to do, I guess Motorola really doesn't like people messing with their devices.
Edit: If there is anymore information you think would be helpful let me know.
So you can get into rsd lite or not? There is no flashable 2.3.5 sbf, except the electrify one. All these sprint test sbfs, who knows, what it is for, but there is no signature and no full partition smgs. I think it won't even start flashing. Or? If it started to flash in your case, then your phone is bricked. But if you never flashed anything like 2.3.5 ota or 2.3.5 electrify or 2.3.5 pudding, and you can get into rsd lite or fastboot, I don't think it's unrecoverablly bricked.
peetr_ said:
So you can get into rsd lite or not? There is no flashable 2.3.5 sbf, except the electrify one. All these sprint test sbfs, who knows, what it is for, but there is no signature and no full partition smgs. I think it won't even start flashing. Or? If it started to flash in your case, then your phone is bricked. But if you never flashed anything like 2.3.5 ota or 2.3.5 electrify or 2.3.5 pudding, and you can get into rsd lite or fastboot, I don't think it's unrecoverablly bricked.
Click to expand...
Click to collapse
Yes I am able to get into RSD lite, and it recognizes my phone just fine everytime with no trouble. I believe it starts flashing, or it at least creates the image but everytime it gets stuck on "waiting for re-enumeration" and it fails there with an error like "phone did not re-enumerate" or something along those lines. I've tried flashing a 2.3.4 sbf as well but it gives me the same error as if I were to flash one of the 2.3.5 files.
Ok. If it was 2.3.4 - 198_7 or 198_6 sbf and did not even re-enumerated, you need to get unlocked. Try flashing pudding unlock and recovery from fastboot or try flashing this - http://d-h.st/WKD or use this method - http://forum.xda-developers.com/showthread.php?p=25826491
peetr_ said:
Ok. If it was 2.3.4 - 198_7 or 198_6 sbf and did not even re-enumerated, you need to get unlocked. Try flashing pudding unlock and recovery from fastboot or try flashing this - http://d-h.st/WKD or use this method - http://forum.xda-developers.com/showthread.php?p=25826491
Click to expand...
Click to collapse
Pudding unlock in fastboot gives me the error "Failed flashing process. Unable to retrieve interface handle(0x7027) phone connected."
Deblur gives me the same error as before, "failed to re-enumerate".
The link to the third method is really hard for me to understand. I understand the basics in which he speed hacks it, but I don't understand which files I will need to put in and where to get those files and which ones are correct etc.
I've found the directory with all the .smg files that I'm assuming is the image. Which files would I need to speed hack to have a chance at saving this thing?
Also, my phone fails to flash anything. I'm pretty sure it doesn't actually get anything done except to create the image.
In the command line when I type in "moto-fastboot oem unlock" it says INFOOEM unlock not implemented so I take it that means I'm still locked for sure.
When I try to manually write stuff via command line with the command "moto-fastboot flash recovery derpunlock" and any of the .smg files, it sends it fine but it fails on writing it.
bdotr said:
When I try to manually write stuff via command line with the command "moto-fastboot flash recovery derpunlock" and any of the .smg files, it sends it fine but it fails on writing it.
Click to expand...
Click to collapse
thats because deprunlock is a bootloader not a recovery.
step by step what have to done to get this error. sounds like your have a error in recovery.
mof9336 said:
thats because deprunlock is a bootloader not a recovery.
step by step what have to done to get this error. sounds like your have a error in recovery.
Click to expand...
Click to collapse
Well it would never get far enough to let me flash a recovery. I'm not able to flash any .sbf's through RSD lite either. The error it gives me every time is "device failed to re-enumerate".
I'm trying it through the ramloader now. I'm pretty sure I'm stuck on an bum electrify install. When I use the electrify ramloader it reboots to a blank screen with the motorola logo on it and when I try to flash derpunlock over through command line it doesn't say anything past "writing 'boot'".
Pudding must be flashed in rsd lite too.
Fastboot oem unlock is useless right now. You need to get there unlockable bootloader there first.
You need to speedhack CG42 it's bootloader, and it's preventing from re-enumeration, because it is not booting to rsd after re-enumeration. Try that one CG42 from pudding first. You need to split that with moto android depacker. But I have suspicion, that your bootloader or ramdownloader was switched to another signature version.
Last chance, but really the last, is flashing Electrify sbf.
****, now I noticed that, you should never ever flash electrify ramdownloader there. You changed rdl signature version. Now you have only the last chance. Download and flash full electrify sbf. But you will have no 4g, no more ota, and I am not sure if it flashes electrify radio or not, so maybe you will have no service.
If you really want, you can try some combination with creating custom sbf for recovering, but you need to read the whole thread in dev section and get much more familiar with that situation.
peetr_ said:
Pudding must be flashed in rsd lite too.
Fastboot oem unlock is useless right now. You need to get there unlockable bootloader there first.
You need to speedhack CG42 it's bootloader, and it's preventing from re-enumeration, because it is not booting to rsd after re-enumeration. Try that one CG42 from pudding first. You need to split that with moto android depacker. But I have suspicion, that your bootloader or ramdownloader was switched to another signature version.
Last chance, but really the last, is flashing Electrify sbf.
Click to expand...
Click to collapse
It now says fail to boot 2. I'm going to try the speedhack when I get home from work today and I'll let you know how it goes. No 4G I can do without, no ota as well I'm fine with. The radio thing might bug me though. So do I drop pudding's CG42 file into the 2.3.5 image while it's being created? Or do I flash just the CG42?
You cannot get unlocked anymore with cg42 from pudding, even with speed hack. You must read whole how to make custom sbf thread if you want to try custom combinations. If nothing will help, your only solution is flashing Electrify 2.3.5 sbf or wait, if some similar photon sbf comes out (I doubt).
Has anyone ever seen this before? I have reflashed stock recovery to the phone and before i could switch options in the boot menu i was stuck to only rsd or fastboot. I am on 2.3.5 I sent rdl3 to the phone it restarted in bootloader or fastboot just a moto logo i sent the fastboot oem unlock command, peices of derpunlock and also a system.img. now i can choose android recovery in my boot menu but system still wont load.
Did u try doing factory reset from boot menu
Sent from my MB855 using xda app-developers app
Yes i did try that along with every other option given system still not booting up... but another strange thing ive noticed is that the android recovery is now letting me choose what zip i want to install from my sd card although i cannot because everything keeps failing the signature check. Has anyone been in this same situation?
I think i flashed the ap20bl.img with sv1 but i havnt flashed the microboot because i didnt know what command to issue in fastboot mode. for the bootloader i typed something along the lines of "fastboot flash rdl3.bin rdl3_unlocked.smg" then i think it restarted to only the moto logo was there and i typed fastboot devices it showed my phone so i took the cg file from derpunlock and typed a command like fastboot flash boot cg42_000somthing.smg it said ok finished... ???
sunny530 said:
Has anyone ever seen this before? I have reflashed stock recovery to the phone and before i could switch options in the boot menu i was stuck to only rsd or fastboot. I am on 2.3.5 I sent rdl3 to the phone it restarted in bootloader or fastboot just a moto logo i sent the fastboot oem unlock command, peices of derpunlock and also a system.img. now i can choose android recovery in my boot menu but system still wont load.
Click to expand...
Click to collapse
are you saying you're on 2.3.5? if you are, your bootloader is permanently locked. it won't do any good to try and unlock it, unless you don't mind bricking. otherwise i have never seen this error before.
if you are on 2.3.5 i'd recommend flashing the electrify 2.3.5 sbf method to hopefully unbrick and return to stock.
Thanx for the reply na7q but I am pretty sure when software says unrecoverable error you have just killed it. When you torpedo root doesnt that kill the xorg server? as soon as its dead BAM!!! your rooted lol i would really like it if some very knowledgeable people on this subject would take a look at this and if they all tell me to do the same thing then 2.3.5 electrify here i come, However, i am not concerned of getting my phone in working order if my phone remains dead for the next few days i dont mind as long is it contributes to this bootloader being unlocked.
sunny530 said:
Thanx for the reply na7q but I am pretty sure when software says unrecoverable error you have just killed it. When you torpedo root doesnt that kill the xorg server? as soon as its dead BAM!!! your rooted lol i would really like it if some very knowledgeable people on this subject would take a look at this and if they all tell me to do the same thing then 2.3.5 electrify here i come, However, i am not concerned of getting my phone in working order if my phone remains dead for the next few days i dont mind as long is it contributes to this bootloader being unlocked.
Click to expand...
Click to collapse
with 2.3.5 you aren't unlocking anything. can almost guarantee it! it's going to take a miracle! i'd say just restore it with the SBF if possible and continue on with life haha. i rooted like a year ago so i don't remember anything about it at this point haha. the only thing that was important was unlocking the bootloader! we need a breakthrough on that for these locked users. that miracle hasn't happened yet. or even gotten close.
Try flashing signed boot.img. This seems to me like failed to boot 2 in other words.
You can flash almost anything into the phone, the signature is checked after reboot, so "flashing ok" in fastboot is normal feedback, sometimes even if it's not ok (radio).
Also with recovery, you can choose whatever zip you want, but when you hit install, signature is checked.
Well you see i receive no failure to boot 1-4 i just get stuck at the moto dual core screen with nothing written at the top. Is it possible that i flashed the bootloader sucsessfully and did not flash the microboot? i didnt know the command to issue to flash microboot. The unrecoverable bootloader error seems interesting to me how would i find out what kernal i should/can flash and what would be the command would it be in fastboot? can i install a system.img via recovery or install bootstrap through fastboot or stock recovery?