Q&A for [DETAILED GUIDE][CM11] Build your own Font app
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DETAILED GUIDE][CM11] Build your own Font app. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Edited-Wrong sub forum
Building error on latest Android Studio
Hello there! I had some issues while following this guide as Android Studio is now on 1.2.1.1 version. I couldn't have it compile but I did research on the topic and found some solutions:
Before anything, I want to point out that the new project wizard is slightly different, and now it does not prompt the user to give it an icon.
First, I was compiling a full font family using the sample file for the Roboto families. First, it would tell me that 'aidl' was missing. To change that, right click app -> Open Module Settings, and change build tools version to 22.0.1 (it's set to 23.0.0 rc1 for Android M test developers), and the error was gone. (Source)
Next, there was an error with the icon. The message was "Error : No resource found that matches the given name (at 'icon' with value '@drawable/icon')." This issue was fixed by changing "@drawable/ic_launcher" to "@mipmap/ic_launcher". (Source)
After that, the app compiled successfully through Ctrl+F9, but an apk was not generated. Following what @rzlatic posted (Source), his compiling method produced an apk under projectname\app\build\outputs\apk. It produced two apks: app-debug.apk and app-debug-unaligned.apk. Either one works. I chose the first one.
As a plus, I tried using .otf font files and it compiles just as smoothly. OTF files have an advantage over TTF in that they produce a significantly smaller apk and they can be resized without having some characters look weird.
It goes without saying that both OTF and TTF apks were installed successfully and the system font was changed without issues.
Hope this helps future people! And thank you very much for all your hard work and posting this guide in the first place!
Related
Q&A for [Rom][OTA UPDATER SUPPORT][GB][Samsung GT-S5302]Lunux Os v2i by S.Arnab.©®
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom][OTA UPDATER SUPPORT][GB][Samsung GT-S5302]Lunux Os v2i by S.Arnab.©®. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
proper sequence of installing updates & feature pack ?
SArnab©® said:
Hi ! Hows all of you??
FREQUENTLY ASKED QUESTIONS:
1) Do I need to download v1.0i n flash before v1.5i+?
A.) Yes you need to do so cuz v1.0i is the actual built n v1.5i+ is just an update package n not a rom in itself.
2) Where is LUNUX OS NEW THEME v3.0i?
A.) Read the #2nd post. There's the link to LUNUX OS THEMES WORLD FOR GT-S5302
3) Do I need to install all the updates?
A.) Yes, if you want the best performance. So aftr installing v1.0i you should flash v1.1i, feature pack v1 then v1.5i+ n then at last v1.6i
A.2) NEW USERS AFTER THE RELEASE OF v1.7i WILL NOT BE REQUIRED TO FLASH VERSION 1.1i ANYMORE. BUT TILL THEN YOU HAVE TO INSTALL ALL THE VERSIONS.
4) Is this actually android version 2.3.7?
A.) Ammm no, this is version 2.3.6 but with updated tweaks that makes it work n look like android 2.3.7.
**************************************************************************************************************************
TO/DO'S:
NOTIFICATION POPUPS IN LOCKSCREEN.[IN PROGRESS]
RESTART OPTIONS IN POWER MENU.
OPTION FOR TAKIN SCREENSHOTS IN POWER MENU[ASKED BY CPANDROIDLOVER]
Click to expand...
Click to collapse
What is the proper sequence of installing updates & feature pack currently ?
i've installed the rom v1.0
message cant see in notification
i cant see message notify in message icon...how can i fix it,plz help me anyone ..plz
Q&A for [New!][ROM][JB][.100] BeAnZ 2 Lite/Google™ BeAnZ 2 Lite 2014/03/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [New!][ROM][JB][.100] BeAnZ 2 Lite/Google™ BeAnZ 2 Lite 2014/03/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
links
Ola,
once mor thansk 4 grat works
,but many ADD-ONS links not work.
Can somone repair Them?
Gracias.
Hi Excellent work!
This is a great rom, amaizing work, i just have a suggestions to Beanz2lite i´m using this, BL in a st27a works too people without fears.
1 could you make default the status bar without speedmeter? or at least giving us options to put another color if that´s isn´t too much for ask or making optional in aroma installer?
2 could you upload again all the add ons links cause some of them failed and i was looking exactly without speedmeter that´s all i want, no any other change, THANK YOU ANYONE
3 could you add smalls apps? option to arome installer this can be Great
4 add support for google photos alone without google plus installation pleaseeee, i´ve found the apk but for obvious reasons (i´m a noob) give me FC and i will give you that here, i don´t want to install g+ anymore to enjoy photos , Pleaseeeeeee i´m not sure if it´s possible but i wanted to know if can work with our xgo jb being ported or something
Thank you AGAIN, we will see more of your work to XGO?:good::good::good:
Greetings from venezuela.
Q&A for ASNET MIUI v5 (4.8.10) - Multi-language
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ASNET MIUI v5 (4.8.10) - Multi-language. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Great job
Tnx for you job!
I <3 MIUI ROMs and your version is perfectly working on my daughter Samsung Galaxy S2
:good:
bluetooth
Hi guys; does anyone knows if this version of Miui 4.8.10 supports Bluetooth 4.0?
I want to buy a heart rate monitor which works with bluetooth 4.0 only.
Thanks
Already after several adjustments to taste it enough ... I have good critiques ... it´s amazing!!!!!.... and simultaneously ..... i have doubt several...
I read a lot of page of the post and i did not find response to my questions.
There we go:
1.-I see that there are 2 compressed files ZIP to flash for switch between the internal and external SD. but i don kow how it works...., I see that it is impossible to see both SD atthe same tme in this rom?
So there the question is .. of what does it(he,she) serve punctually these compressed files ZIP? I do not want to exchange memoes ... only I want to see the two like it it(he,she) was doing habitually in other ROMS.
2.-There are other one (different) compressed files ZIP flasheables to extract the CRT .. I used it and it works perfectly ... (it is a comment ....)
3.- Somebody can explain to me how change this compressed file ZIP flaseable to change the DPI? how many dpi in stock? and this zip change to?
4.- Where is the GPS?
5.-Since it is possible to disable the famous " slide the finger " of the loock screen? I ´m use a PIN to unlock.
6.- what´s is this app? chinnese app?
I send a screen
7.-I flashed the compressed file ZIP of the supersu .... but have I just noticed that this rom comes already roted? Or am I wrong?
only rest to me wait for yours support for help me.... and then... test the kernel apolo and see consumptions and use the BNL of course!!! !
Thanks to all.
I wait could help me.
Leo
Q&A for [MOD] Add top number row to Swype
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [MOD] Add top number row to Swype. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Why i can't find kbd_qwerty.xml in res/xml folder??
there are many files call kbd_qwertyXX.xml in that folder but no kbd_qwerty.xml
and also can't find res\xml-land folder
bacb123 said:
Why i can't find kbd_qwerty.xml in res/xml folder??
there are many files call kbd_qwertyXX.xml in that folder but no kbd_qwerty.xml
and also can't find res\xml-land folder
Click to expand...
Click to collapse
I wondered if anyone uses this thread since all the help and discussion seem to go on in the main thread.
You may have already discovered that but if not, read this. The download link for English is still live if you want to give it a shot.
http://forum.xda-developers.com/showthread.php?p=58687241
alternate symbols with Swype number row mod
Hi,
I have been modding swype for a while using this thread, and I've just finally got around to sorting out the latest version with lollipop. However I don't understand how to change the secondary symbols, I can get them to show on the keys, but holding the keys just reverts to the original secondary key. I've attached my xml below, can someone explain how I can get %*\ / ~ to actually work as seconday symbols? Thanks!
Thanks!
jakenn said:
Hi,
I have been modding swype for a while using this thread, and I've just finally got around to sorting out the latest version with lollipop. However I don't understand how to change the secondary symbols, I can get them to show on the keys, but holding the keys just reverts to the original secondary key. I've attached my xml below, can someone explain how I can get %*\ / ~ to actually work as seconday symbols? Thanks!
Thanks!
Click to expand...
Click to collapse
Have seen the template?
You also have to modify kbd_qwerty_panlatin_sym.xml
If you want to see the extra symbols in the longer hold-press multiple choice pop-up or the add more symbols to the blank ones in your number row, you will also need to edit panlatin in /res/values/strings.xml (extras would be added to end of file)
It's good to keep your own template with all the mods to easily edit when the new release drops. It's OK to ask for help in the main thread; most do.
Thanks! That strings file was just what I needed, working perfectly now. Best swype keyboard I've had, I'm very happy with it now. Unfortunately my old posts seem to have been deleted so I can only post in q&a for now.
jakenn said:
Thanks! That strings file was just what I needed, working perfectly now. Best swype keyboard I've had, I'm very happy with it now. Unfortunately my old posts seem to have been deleted so I can only post in q&a for now.
Click to expand...
Click to collapse
You're welcome. One more thing, if you want to see the alternate keys displayed on that theme, check this post for theme edit details.
http://forum.xda-developers.com/showthread.php?p=58832978
Sent from my SM-N910P using Tapatalk
Q&A for How to get Tinted Status Bar Without Using Any App
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for How to get Tinted Status Bar Without Using Any App. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Zip file for statusbar ?
Can't you give a zip file, which we can flash through cwm ? It will be easy for many.
plz help me..
i'm having problem recompiling systemui apk...i get the following error.
Hard to understand :3
What things to I need to do in here sir @eboybasit
Replace package 1 with the package of the app in which you want your status bar to be tinted or color changing. Remember You have to replace package 1 twice, one in the beginning is for registering package in the smali and the other is to make status bar color change while opening the app of that package. Replace Hex 1 by the color hex that you want to appear while opening the app of package name package 1.
6) Similarly Do same from Package 1 to Package 12 and also with Hex 1 to Hex 12
7) Add these line in Your tw_status_bar.xml (Touchwiz) or gemini_status_bar.xml (mtk) Blue color = ADD
8) Save Recompile.*
Dont cook up your phone**
Tested in ICS, JB 4.1.2 and JB 4.2.2
Full Credits:-
Fmd Team for color smali
Agung Adhie Nugroho for gradient (shade)
Last edited by eboybasit; 2015-03-09 at*10:17PM.
Package for whatsapp ===> com.whatsapp
Hex ====> #66000000
Thanks bro eboy great work!
Can anyone make youtube guide
Sent from my GT-I9060 using Tapatalk