Related
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Jaroslav285 said:
Hi,I have Xperia mini st15i,i cannot restore work touchscreen and keys after wrong flashing to AOSP ICS 4.0.3 sk17i with CWM.....sorry for my bad english...help me please....
Click to expand...
Click to collapse
You'll have to flash your stock fw via flashtool then again install the correct fw for your st15i
i flashing on flashtool,but touchscreen not working,i flashing stock via flashtool and flash after via seus new firmware, but touchscreen not working
Yes its working but its really black,disnt sure but it should work,turn on phone and slide your finger where is unlock key if it vibrate then you got same problem like me,after flashing touch screen went black and reflashing doesnt fix it.
Sent from my WT19i using Tapatalk
how fix my phone?for work the touch screen and touch keys....
Try reflash it back to the orginal firmware then try again. Something might have gone wrong while you was flashing or the one you flashed was for a different phone.
Thank you, but your advice did not help me,my phone everything not helping, I'm sitting for three days without a phone ...help me please
i am aslo having same problem guys please help...
does anyone know how to get the touchscreen to life, the above does not help ????
Jaroslav285 said:
does anyone know how to get the touchscreen to life, the above does not help ????
Click to expand...
Click to collapse
i was having same problem...so i went to service center and they said touch panel is damage and they replace it without any cost..i think you should go to service center and tell them that your touchscreen is not working and if your bootloader is unlocked they dont tell them that your bootloader is unlocked..
the same thing
any idea
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Sorry for my bad english. I've the same problem. After taking my phone to service they told me that fixing will costs about 150€ and I've refused it. So I would like to try these instuctions:
1) OK
2) hybromV10 DL: https: // dl.dropbox.com/u/61884099/hybrom_v10.zip OK but I've no CWM installed and I'm not root, how can I install it?
3) OK
You've been unlock bootloader first bro to install custom kernel to make your CWM and Root Access,,
Sent from my ST15i using xda premium
Didnt work for me
Jaroslav285 said:
I thanks all users help me,touchscreen sufescully worked.
This is instruction for fix your phones:
How To Fix ! thanks javad0111 and lunatic2nuts...
Original post: http://forum.xda-developers.com/showthread.php?t=1423562
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
Tester : razerblade17
First flash fw 62,,but dont turn on your phone after flash,,then flash custom kernel, i use rage kernel,,,b4 on your phone you should copy hybrom v10 mini pro on sd card,,then flash Hybrom v10 mini pro in cwm,,,after that restart you phone,,,you will notice your phone can touch but it not work properly like b4,,,and your phone has problem with screen orientation,,,off your phone,,and flash back to fw 62,,,if it work,,please thank to original perso who post it b4,,,sory for my english
Dont Forget Thanks for lunatic2nuts and javad0111
Good LUCK
Click to expand...
Click to collapse
didnt work for me...tried but no worth...
any other soln.>??:crying:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
i think you must reinstall firmware
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
did you flash a kernel when you installed the rom?
if yes then you must have flashed one for the wrong device, please chaeck otherwise flashing original firmware will make everything all right
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
R10MaRiOo said:
So you think is software problem? Right?
ok i will flash a new kernel and other rom lets see what happend
Thanks
Click to expand...
Click to collapse
best way to check, flash original firmware!
this thread has ftf if you don't have it
http://forum.xda-developers.com/showthread.php?t=1568792
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
installing a ftf is like reverting it to a stock stage, if your phone was working then, it should work now. are you sure you installed sk17 and not st17?
i cannot think of any other reason for this..
R10MaRiOo said:
Thanks gandhar
I flash the sk17 tft with flashtool in flashmode
my cell starts but i can unlock it, the screen still doesnt work, i noticed the touch buttons i mean "back" and "options" dont work.
All fisical buttons works!
Any suggestion?? Please
Click to expand...
Click to collapse
Try flashing Stock firmware 5 to 6 times. I read somewhere that some times touch drivers are lost which can only be restored by flashing stock again and again
You can also refer this thread
OMG!! i flashed it six times and the screen doesnt work )=
Maybe if i install a rom from another model like mini or live with walkman
I thought that because whent the problem starts i change my build prop to make run a wt19 rom! with the boot_official_port_mango kernel, maybe my phone thinks its another phone xD
Well, you can always restore your phone with the Sony app and start again.
Anyway, I don't think its a good idea to try to use a ROM made for another device.
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
On PC Companion, start the "Support Zone" and you can restore from here. I think Sony dont support SEUS anymore, but you can find it in some forums or download sites.
R10MaRiOo said:
I read in other post i have to flash it via seus
Do you know where i can download it?
I just found pc companion
Click to expand...
Click to collapse
here's SEUS
http://dl.dropbox.com/u/63607856/temp/Update_Service_Setup-2.11.7.13.exe
btw i am not sure that SEUS works with unlocked bootloaders, still no harm in trying.. good luck
Fix
Try the fix from here
It helps me.
Thanks Kobzar666
But its is a fix for st15
lunatic2nuts :
-STEP 1: Install lastest firmware .62 for st15i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (sk17i)
-STEP 3: Then again flash lastest firmware .62 for st15i
And in future be carefull, and stay away from minipro ROMs
so i have to interchange i mean
-STEP 1: Install lastest firmware .62 for sk17i. - use Flashtool
-STEP 2: Then via CM from zip install hybrom_v10. for minipro (st15i)
-STEP 3: Then again flash lastest firmware .62 for st17i
someone can upload HYBROM v10
the files in the official post are private
Doesn't have to be Hybrom v10. It is a rare solution anyway...
Sent from my Xperia Live using xda premium.
so i can flash any rom just have to be be for st15??
Something like that happened to me with an X8 with unlocked bootloader and custom ROM.
Everything was fine for a month and then literally out of nowhere the phone s speaker stopped working! Just like that! No alarms,no ringing...nothing!
Before throwing away the phone,I gave it a shot and re flashed stock locked bootloader and ROM and everything started working again!
I then sold it and got a mini! :-D
N.
Sent from one of my 4 iPads.
I Fix It!!
Thanks for everyone who try to helps me, I fix it flashing it with wotan server, yes i have to buy a credit! But now everything works again
R10MaRiOo said:
Hi friends, im sad because my touchscreen dont works
My phone is a sk17 with unlock bootloader, root and the recovery still working
The problem strats when i chance the build prop of my phone, i change all the "SK17" to "WT19" to make work a rom.
Then i noticed my screen dont work, so i decide to install a rom via cwm.
I do that but the screen still no working, i only want to access to my build prop to change it again and make my phone works again
Please help me i am a noob
I access via pc to build prop file and it says "SK17" i think now it is hardware problem!! DX
Anyone can help me?
Click to expand...
Click to collapse
Try to reflash firmware via wotan client
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
pramodblog said:
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
Click to expand...
Click to collapse
Just visit a Sony service centre... Itseems they downgrade the Rom to gb if u want.
Or you can flash ftf firmware file using flashtool. I don't think that voids warranty:good:
Sudanminipro said:
Just visit a Sony service centre... Itseems they downgrade the Rom to gb if u want.
Or you can flash ftf firmware file using flashtool. I don't think that voids warranty:good:
Click to expand...
Click to collapse
Correct they wont know the difference between flashtool downgrade and normal gb from before. So for warranty you will fine.
use flash tool .. it wont void warrent , because you will flash OFFICAL ROM .. so wont void warrenty
But im a newbie. How to use flash tool? my phone is not x10 mini pro. It's SK17i Mini pro.
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
check this forum, everything you must know
http://forum.xda-developers.com/showthread.php?t=1568792
saeed-constantine said:
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
Click to expand...
Click to collapse
But the rom is modified. Isn't it? I need the original 2.3.4 build 4.0.2.A.0.58 rom... Please can u find me a link?
If you do want to keep your warranty, you need to go to a service center. If not it's more than easy on Android.
saeed-constantine said:
use this rom
http://forum.xda-developers.com/showthread.php?t=1818357
Click to expand...
Click to collapse
thanks man
pramodblog said:
Hello,
I updated my Xperia Mini Pro to ICS 4.0.4 last week. But there are lot of problems here. Also buggy and laggy.
So, how can I downgrade my mobile to original stock rom? without loosing the warranty. Because I bought this last month and I don't want it to lose warranty.
Click to expand...
Click to collapse
you can search for official rom for GB at the development area
be sure you install flash tool too
it wont loose your warranty
If I were you I would look here and go to XX.Downloads. At Number 2 there is xperia mini pro.
Download the 4.0.2.A.0.42 rom (for SK17i) and install flashtool, then click on the flash ,select flashmode and select the ftf from 4.0.2.A.0.42.
But install the drivers from the drivers folder of flashtool before.
Then click flash and power off your phone. Press and hold volume down and put usb cable in and connect to pc. The green light will shine.
Then flashtool will do everything automaticly and will flash the rom. (Btw all your data will be wiped!)
If you are on .42 then you can root with flashtool (just enable debugging and unknown sources on phone) and click the open padlock to root. Then connect to your wlan and search for updates on phone. Then update via ota to .62 firmware!
Thats the best way and it's the official firmware and it's like you never have been on ics before!
Michi_optimus_me said:
If I were you I would look here and go to XX.Downloads. At Number 2 there is xperia mini pro.
Download the 4.0.2.A.0.42 rom (for SK17i) and install flashtool, then click on the flash ,select flashmode and select the ftf from 4.0.2.A.0.42.
But install the drivers from the drivers folder of flashtool before.
Then click flash and power off your phone. Press and hold volume down and put usb cable in and connect to pc. The green light will shine.
Then flashtool will do everything automaticly and will flash the rom. (Btw all your data will be wiped!)
If you are on .42 then you can root with flashtool (just enable debugging and unknown sources on phone) and click the open padlock to root. Then connect to your wlan and search for updates on phone. Then update via ota to .62 firmware!
Thats the best way and it's the official firmware and it's like you never have been on ics before!
Click to expand...
Click to collapse
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
pramodblog said:
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
Click to expand...
Click to collapse
No they are GENERIC firmware so its all SONY made.
You can update your phone still:good:
pramodblog said:
Thank you so much dude! I will do that. But i need to know that firmware is "world" one or is that a firmware made for a mobile company like AT&t or something else? Because I don't need to see a company logo when my phone is starting.
Also if I do this, am I able to update my OS to newer firmwares if SONY release it? Like ICS or JB?
Click to expand...
Click to collapse
Yes, you can download from here and if your bootloader is locked you can still upgrade over the air (wlan) to newer versions of your os!
Yes you can install upgrades from sony, to ics or jb (if it's out).
I think it's polish rom or something like this, but you can choose your language and it's like the generic world, only the crap by sony (like things that are preinstalled, like mcaffee or whatsapp, playstore now, etc ) is different (whatsapp is on some sony roms preinstalled, but you can also download in playstore, it was just an example!!)
So just flash it like I told you and then you are on stock sony rom, you can root it (cause .42 you can root easily: just enable usb-debugging and unknown sources on your phone with 4.0.2.A.0.42 and click the open padlock next to the flash). Then you can update (if your bootloader is locked, otherwise your phone will brick) to .62 firmware, the latest gingerbread firmware by sony. ( I don't know excatly in which countries, but in Germany there is a .69 firmware, with no changes on the software, I think, compared to .62)
Greets!
Michael
Hi folks! Does anyone still have available a Gingerbread 2.3.4 stock-rom for the mini pro (sk17i)? I can't find any of them that i have backed up somewhere on my hdd
hertell said:
Hi folks! Does anyone still have available a Gingerbread 2.3.4 stock-rom for the mini pro (sk17i)? I can't find any of them that i have backed up somewhere on my hdd
Click to expand...
Click to collapse
Here. This the .62 global version.
http://www.mediafire.com/file/3gcfdlhivbbdcqa/SK17I_4.0.2.A.0.62_generic-ID.ftf/file
karandpr said:
Here. This the .62 global version.
http://www.mediafire.com/file/3gcfdlhivbbdcqa/SK17I_4.0.2.A.0.62_generic-ID.ftf/file
Click to expand...
Click to collapse
Thanks!! This saved my day
Hello everyone!!!
i got a serious problem in my Sony Xperia P. i bought it 3 days ago and it was feeling very laggy and i was not satisfied with it so i just used sony own pc companion and updated it and it didn't help and gives one more trouble.. the dialer starts lagging.. so i read somewhere about this site and read and learn to install custom rom..
The main problem is I tried to install the custom kernel ( nemesis ) by going into CWM recovery and it successfuly install but now my phone is only showing blue light and after red light when i tried to open CWM.. i cant install my rom.. please anyone help.. i bought this phone with my own money doing some very hard work.. please anyone just tell me how can i go back to original rom or install custom rom.. and my bootloader is allow to unlocked but i didn't unlocked it and i forgot.. Sorry for that it was my mistake.
hello there.
okay, 1st, you need to get your phone alive again by flashing a stock rom. i suggest you follow this tutorial here:
http://forum.xda-developers.com/xperia-u/general/how-to-resolve-softbrick-upgrade-to-ics-t2023135
The link to flash tool is dead i think, so you can download the latest flashtool here:
http://www.flashtool.net/download.php
follow Dr droid instructions word for word and you'll be fine. It saved my Sola last year, and it will save your XP.
Keep flashtool installed, because you can use it to unlock your bootloader. Just get the phone running first.
Good luck....
THEMANIAC3 said:
Hello everyone!!!
i got a serious problem in my Sony Xperia P. i bought it 3 days ago and it was feeling very laggy and i was not satisfied with it so i just used sony own pc companion and updated it and it didn't help and gives one more trouble.. the dialer starts lagging.. so i read somewhere about this site and read and learn to install custom rom..
The main problem is I tried to install the custom kernel ( nemesis ) by going into CWM recovery and it successfuly install but now my phone is only showing blue light and after red light when i tried to open CWM.. i cant install my rom.. please anyone help.. i bought this phone with my own money doing some very hard work.. please anyone just tell me how can i go back to original rom or install custom rom.. and my bootloader is allow to unlocked but i didn't unlocked it and i forgot.. Sorry for that it was my mistake.
Click to expand...
Click to collapse
Don't panic, everything that is software related can be easily fixed:
http://talk.sonymobile.com/t5/Xperi...ctions-using-Pc-Companion-Windows/td-p/249946
If you have trouble with the sony software, you can always flash the original 4.1.2 Android version through flashtool, which was linked above.
Here is the image:
https://www.dropbox.com/s/abphef4hmwh0sko/LT22i_6.2.A.0.400(JB)_Central Europe(1261-8592).ftf
it's from my dropbox, so you don't have to worry, I flashed it yesterday and brought my xperia p back to life
custom rom
tell me any good custom rom for xperia p.. and after i install the stock rom. the soft keys (menu,back,option) sensivity is low as compared to before.. i have to puch harder to use them.. is that also a software prob please help me with this also.
THEMANIAC3 said:
tell me any good custom rom for xperia p.. and after i install the stock rom. the soft keys (menu,back,option) sensivity is low as compared to before.. i have to puch harder to use them.. is that also a software prob please help me with this also.
Click to expand...
Click to collapse
Use carbon rom. It is the smoothest rom so far.
For the soft keys I don't understand.
Hamza Murad said:
Use carbon rom. It is the smoothest rom so far.
For the soft keys I don't understand.
Click to expand...
Click to collapse
soft keys where the white light always stays.. it's just not working right. and where can i find the carbon rom..
THEMANIAC3 said:
soft keys where the white light always stays.. it's just not working right. and where can i find the carbon rom..
Click to expand...
Click to collapse
I do know what soft keys are but I don't have the solution to your problem. Carbon can be found in the xperia P development section.
---------- Post added at 10:36 PM ---------- Previous post was at 10:34 PM ----------
http://forum.xda-developers.com/showthread.php?t=2603396
Here you go. You do need an unlocked bootloader.
Hi,
My Xperia Z2 is facing problems after problems. it all started with disappearance of Xperia Home. I was instructed by xda members to change the ROM i had reinstalled stock rom and this issue was fixed. then came then next issue, proximity sensor stays ON always and hence the in call interface became inaccessible. got another tip form xda to use Xposed framework to disable proximity sensor. this ROM also had a display flickering on grey colour (only) which was fixed by re-installing the same ROM. Reinstalling the ROM helped to fix the display flickering issue but the Proximity sensor issue still persists, ( temporarly fixed using Xposed Framework). After reinstalling the ROM, started another issue, the touch panel stops responding, ( except touch, all other keys will be working ie, Volume, power, camera, etc ). after a reboot the touch would work as normal. since its not feasible to change ROM every week, Please help me with a permanent solution. Thanks
Android Version : 5.1.1
Phone Model : Xperia Z2 D6502
Build # : 23.4.A.1.200
Not to say, but it was a very common hardware problem in even brand new xperia z1's. I think they got rid of it in z2, but maybe your phone is an exception. If you have warranty then send it back to repair if the problem still persists even on a clean stock rom.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
stock rom
clean stock rom means the one downloaded using XperiFirm ?
also Z2 launched with Kitkat, now latest update is lolipop 5.1.1.
So which should i try ?
mr.loverlover said:
Not to say, but it was a very common hardware problem in even brand new xperia z1's. I think they got rid of it in z2, but maybe your phone is an exception. If you have warranty then send it back to repair if the problem still persists even on a clean stock rom.
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
Click to expand...
Click to collapse
jijishthomas said:
clean stock rom means the one downloaded using XperiFirm ?
also Z2 launched with Kitkat, now latest update is lolipop 5.1.1.
So which should i try ?
Click to expand...
Click to collapse
Sry, for a late answer.
Yes, stock rom means non-rooted ftf (so mostly files downloaded from xperifirm).
You may try both, but I think that kitkat has less errors.
ok thanks..let me try...
I am new in this field. so can i ask you one doubt?
My z2 is now rooted and bootloader unlocked and with philz recovery. so when i install the stock rom using xperifirm i will loose all these isn't?
I had downloaded the 5.1.1 Rom using XperiFirm. Can you pls tell me how to install this, since i have unlocked bootloader?
Unlocked bootloader won't change anything in terms of installing os.
The easiest way to this is just to use flashtool to flash the file, but it will also wipe your internal storage.
If you don't want your internal storage to be formatted you have to uncheck "wipe data" in Flashtool before flashing.
Btw it is preferred to wipe data in philz recovery before proceeding with flashtool (this will only wipe user data, not internal storage).
Sent from Xperia Z2
Luckily not from an iPhone = Yesterdays technology at tomorrows prices
jijishthomas said:
ok thanks..let me try...
I am new in this field. so can i ask you one doubt?
My z2 is now rooted and bootloader unlocked and with philz recovery. so when i install the stock rom using xperifirm i will loose all these isn't?
I had downloaded the 5.1.1 Rom using XperiFirm. Can you pls tell me how to install this, since i have unlocked bootloader?
Click to expand...
Click to collapse
just run Flashtool, shutdown your device, select firmware in Flashtool, click start and follow the instructions
After that your device is purely stock without root and custom recovery.
If you want a rooted 5.1.1 ROM with recovery just do the following:
- dowload Sony firmware D6503_17.1.2.A.0.314_KK_4.4.2_UK+Generic (google for it) - this is the latest which can be rooted
- download rootkitXperia_KK4.4.2_20140719 (google for it)
- flash the firmware with flashtool
- root the device with rootkitXperia
- download any ROM you like and copy it to your device
- reboot into recovery and flash the ROM
now you have a rooted ROM with custom recovery and unlocked bootloader