[Q]Ipega 9017 Problem - Android Q&A, Help & Troubleshooting

Hi people,
Recently i have bought ipega 9017 the tiny one without triggers(only bumper buttons) so i played fee games seriously had button layout problems, then i copied keylayout that i got from here, i played "Reaper" fine(after doing the thing with keylayout it would connect straight from bt settings without ipega game center) then i tried Avp Evolution which supports MOGA, it didnt work with bare x+home without game center, then i tried y+home with game center, it sees my controller as Moga with left and right triggers, and button layout is wrong, characters move in d-pad button analog doesnt work "Y" button is pause button....
Is there anyway i can edit button layout(there is no ingame button layout editing option) or to make it see as controller with similar button layout?

Bump

Related

Bluez IME , help identifying buttons for games that don’t supports controllers?

I am trying to change the mapped buttons in bluez ime for the bgp100 to enable controller game play on games that
don’t have native game pad support. Below I have one game this works for.
1.Do all games support something like this? it seems this game has some sub
mapping as if it could be played if you have physical buttons/keyboard?
2.Is there a way to see what touch screen actions relate to buttons. Some key logger like app? This would help save wasted time with trial and error to find all needed keys if they exist.
Dark incursion, What I found.
Page up – toggle 3d
Button start – game menu
Dpad center - jump
Button x - attack
Dpad left - left
Dpad right - right
Dpad down - down
I am still missing one useful virtual touch screen button for using equipped powers?

USB Joystick with nesoid, snesoid: buttons not mapping

Hi,
I'm using a Nintendo gamecube controller with USB adapter plugged into my prime dock. This works fine in games like shadowgun and a few emulators - ST, Frodo c64, Marvin spectrum, N64oid, Mame. However, I can't get it to work properly with nesoid, snesoid, genoid, gbaoid
The d-pad and analog stick work fine, but it won't map any of the controllers buttons. When I go to configure the controller and "press a hardware button" to pick button A for example - it takes the click of my joystick button, but then displays "unknown" next to the button, and doesn't recognise the button in the game. This happens for all the button assignments I can map the buttons fine to the keyboard, or use the on screen controls - but it just won't recognise the button press - displaying "unknown" each time.
any help/advice would be much appreciated. I'm tempted to try some other emulators - but not sure which ones to try.
See if anything on this site might help you:
http://wiki.greenrobotgamer.com/
kaiserpc said:
Hi,
I'm using a Nintendo gamecube controller with USB adapter plugged into my prime dock. This works fine in games like shadowgun and a few emulators - ST, Frodo c64, Marvin spectrum, N64oid, Mame. However, I can't get it to work properly with nesoid, snesoid, genoid, gbaoid
The d-pad and analog stick work fine, but it won't map any of the controllers buttons. When I go to configure the controller and "press a hardware button" to pick button A for example - it takes the click of my joystick button, but then displays "unknown" next to the button, and doesn't recognise the button in the game. This happens for all the button assignments I can map the buttons fine to the keyboard, or use the on screen controls - but it just won't recognise the button press - displaying "unknown" each time.
any help/advice would be much appreciated. I'm tempted to try some other emulators - but not sure which ones to try.
Click to expand...
Click to collapse
Hi,
you have to change the keyboard mappings in /system/usr/keylayouts/Generic.kb (hope, I remember the path correctly ) I redefined myself the buttons to numbers 1-8 and now is no problem to change it in snesoid etc. You need root to change this of course.
Or you can try the External Keyboard Helper from Play and redefine the keyboard there (didnt tested, but should work as well)
Hope, this will help.
Tomas

[Q] OTG Gamepad Button issue

OK... So I have searched everywhere on this and almost every thread on OTG is about getting it to work... Or more specifically getting a SixAxis to work.... There's already plenty of info about Sixaxis and I'm not asking about it....
I have a Retrolink SNES GamePad, and an Xperia Pro MK16i.
I've connected the Snes Pad using an OTG cable and it works as a standard controller, where Dpad is cursor keys, Button1 is Dpad Select, Button2 is Back....
The issue is that when I hold Button4 (Y on the Snes), it releases the Dpad Left/Right, and then pressing the Dpad Left/Right releases Button4...
It will not let me press Dpad Left/Right AND Button4 at the same time (eg. Running in a Super Mario game)... The same thing happens with Dpad Up/Down and Button5 (L Shoulder Button on Snes).
All other buttons work perfectly together and have no affect on the Dpad.
Also this is not an issue with the GamePad itself... As I've tested it on both my Windows7 systems (one is HomePremium, one is Professional), and the Y Button works perfectly fine with the Dpad, as does the L shoulder button.
I have no idea what is causing this conflict, and any help would be appreciated.
I should point out they only have an affect on one axis, so:
Button4 can't be pressed with Left/Right, and
Button5 can't be pressed with Up/Down.
EDIT: I forgot to mention, I'm on the Stock GB ROM 2.3.4

Moga Pro Power - Order and Chaos?

Hey wondering if anyone have tryd using Moga Pro Power to play order and chaos? Order and chaos got HID support but theres no menu for gamepad controller or any HID devices in order and chaos. And Moga universal driver doesnt support the moga pro powere? If anyone got this to work with could you please explain it?
Anyone?
It works in b mode. After connecting to the controller go to settings.....bluetooth......tap the gear next to the controller and check the box use device to control. I cant figure out how to talk to people for quests or pickup loot though
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Moga Pro Controller Mode B HID and Order & Chaos Online
As long as you have a newer device, you don't even have to install the Moga Pivot app; just turn the controller on Mode B, enable Bluetooth on your device and connect. Once you establish the initial connection, my devices will automatically connect, just by turning the controller on and enabling Bluetooth. Once connected, just open your Order & Chaos Online app. Keep in mind, the controller doesn't offer 100% functionality, so you'll still have to use the touch screen for certain aspects.
At first, the controls were confusing, but after playing around with the controller some more, I’ve figured out just about every aspect of the controller.
Use the direction pad to navigate menus. Concerning gameplay, here's what I've figured out so far.
GAMEPLAY
Analog Sticks=========Movement/Camera
Analog L3/R3=========???
L2/R2===============Camera Zoom In/Out
L1==================Cycle Face Button Skills X, Y, B
L1 (long press)========Shortcut to Left Column Hotkeys
R1=================???
R1 (long press)========Shortcut to Right Column Hotkeys
X, Y, B==============Skills / Spells
A==================Jump
Direction Pad
Left/Right===========Cycle Targets
Up=================Map
Down (long press)=====Chat Window
MENU
Direction Pad=========Move Cursor
A==================Confirm
A(Double Tap)========Move Cursor to Sub-Menu
B==================Cancel/Back
L1/R1===============Cycle Tabs in Sub-Menu
L1/R1(Long Press)======Hotkey Columns Left/Right
Skills & Spells can be assigned to X, Y, B, as well as the 2 columns of hotkeys, by long pressing and then dragging from the menus onto the desired slot.
As of now, I haven’t found any button to interact with NPC’S or to loot corpses. Gameloft hasn’t responded to my emails or request for support, aside from the generic rquest received email.
Hope this helps.
My post over at the official Gameloft forums. Because I'm newly registered here, it won't let me directly post links. forumsorderchaosonline.com/forum/topic/using-the-moga-pro-mode-b-hid
Moga Pro Controller Mode B HID and Order & Chaos Online
Figured it out at last! How to loot and interact with NPC'S! Press and hold X! I think this is everything... No need to touch the screen!
GAMEPLAY/COMBAT
Analog Sticks=========Movement/Camera
Analog L3/R3=========???Nothing
L2/R2===============Camera Zoom In/Out
L1==================Cycle Face Button Skills X, Y, B
L1 (long press)=========Shortcut Left Column Hotkeys
R1==================???Nothing
R1 (long press)=========Shortcut Right Column Hotkeys
X, Y, B===============Skills / Spells
X (long press)=========Auto Attack, Loot, Interact
A===================Jump
Direction Pad
Left=================Cycle Targets
Up==================Map
Down (long press)======Chat Window
MENU
Direction Pad==========Move Cursor
A===================Confirm
A(Double Tap)=========Move Cursor to Sub-Menu
B===================Cancel/Back
L1/R1================Cycle Tabs in Sub-Menu
L1/R1(Long Press)=======Hotkey Columns Left/Right
Right Analog==========Scroll Pages Left/Right
Skills & Spells can be assigned to X, Y, B, as well as the 2 columns of hotkeys, by long pressing and dragging from the menus onto the desired slot.
Any way to map the X, Y, B buttons (and others) to the 2 columns of hotkeys? I'd prefer to play with the 2 column hotkey open so that I can use more spells, but was unable to find a way to map button presses to the 2 column hotkey slots. I want my button presses to invoke spells in the 2 column hotkey menu instead of the standard 3 hotkey and jump menu.
I'm guessing when you say you can long press and drag that means you can add things to the 2 columns to invoked by a finger press.

Android Key Mapping

Hi all,
I am trying to map some keys to play a game named War Robots on my Android Nvidia Shield TV device but I am struggling with one key but only in 'touchscreen mode'. Unfortunately in 'keyboard mode' the game doesn't seem to operate correctly and the robot turns in circles and you have to press the toggle to make it stop turning whereas in touchscreen mode (i.e. unplug the mouse and keyboard) the turning is perfect but I can't map a button on my controller to trigger firing all weapons.
The firing all weapons button when using a keyboard and mouse is mapped to Left Mouse Click or Shift or funnily enough the pipe symbol '|'.
This is what I have done so far:
1. Installed a keymap app on the Shield
2. Mapped all buttons (X and B controller buttons to Space and 'Q' for other special game properties) and have the 'Fire All' button 'Shift' triggered by the 'A' button on the controller.
When I start the game with the keyboard I test this and all mappings work fine and 'A' does seem to 'Fire All' but as soon as I want to go to touchscreen mode (by unplugging the keyboard and mouse) to get the maneuverability working the 'A' controller button no longer does anything although the other mapped buttons do still work on the controller.
So frustrating that touchscreen mode seems to just stop this one button and I have spent hours at this trying the other buttons that had mapped okay to 'Space and'Q' to the 'Fire All' to get around it but had no luck so maybe there is no way. I am not even sure if this touchscreen mode is unique to War Robots to be honest or it is standard Android.
Anyone know in Android touchscreen mode how to trigger a left mouse click or Shift button press maybe or any ideas for a workaround?
Thanks
p.s. this techy stuff might help some gurus on here as to how they do things: developer.android.com/stories/games/war-robots

Categories

Resources