After update i lost signal.the old fix and link cant be found anyone know of a new link
shadricksimms said:
After update i lost signal.the old fix and link cant be found anyone know of a new link
Click to expand...
Click to collapse
I'm thinking a little more information will be helpful.
What ROM are you on?
What update did you do?
What firmware & modem/baseband are you on?
This is a little, well a lot, too general to give any assistance.
What ROM are you on?
What update did you do?
What firmware & modem/baseband are you on?
It was on stovk . I found a fix buy now have to reflash to boost
This is what I'm on now trying to go back lol
shadricksimms said:
This is what I'm on now trying to go back lol
Click to expand...
Click to collapse
if you need to get back to boost, maybe this thread will help
Galaxy Note 3, Note 2, S4, S3, and S2 Flash to Boost, Virgin Mobile, Ting, etc.
Related
I have an S3 i9305 4g lte version, on orange network uk. I rooted the phone using CWM. Then installed the Panorama ROM, using the guide on here. And yes i have used the search function, followed pretty much every guide there is. Still no solution. Im beginning to think my phone will forever be caught up with this problem
on top of there being no service. The phone itself has started to randomly turn off, and also lags!
I regret rooting lol just wasn't meant to be.
Can anyone help me? Literally, I would be so grateful if someone can actually help me fix this problem. I basically just want my network service back, regardless of unrooting or not.
Thanks a million in advance!
alex
alexj90 said:
I have an S3 i9305 4g lte version, on orange network uk. I rooted the phone using CWM. Then installed the Panorama ROM, using the guide on here. And yes i have used the search function, followed pretty much every guide there is. Still no solution. Im beginning to think my phone will forever be caught up with this problem
on top of there being no service. The phone itself has started to randomly turn off, and also lags!
I regret rooting lol just wasn't meant to be.
Can anyone help me? Literally, I would be so grateful if someone can actually help me fix this problem. I basically just want my network service back, regardless of unrooting or not.
Thanks a million in advance!
alex
Click to expand...
Click to collapse
Don't let one unsuitable ROM tarnish your experience Try flashing a different modem.http://forum.xda-developers.com/showthread.php?t=1740061
Also, if you're unhappy with the ROM, flash another one. Plenty of good roms out there.
linx8 said:
Don't let one unsuitable ROM tarnish your experience Try flashing a different modem.http://forum.xda-developers.com/showthread.php?t=1740061
Also, if you're unhappy with the ROM, flash another one. Plenty of good roms out there.
Click to expand...
Click to collapse
cant find the orange network modem on there? for jb 4.1.2 ?
I'm no modem expert, but search based on your region http://forum.xda-developers.com/showthread.php?t=1356325
Try different ones to see which one works best for you. Also search those threads for your network/region to see what other people are using.
Does your IMEI match the one under the battery?
Do you have an EFS backup?
Also, this is a section for the i9300
Glebun said:
Does your IMEI match the one under the battery?
Do you have an EFS backup?
Also, this is a section for the i9300
Click to expand...
Click to collapse
i think the problem is with the fact i dont have an efs folder, and that there is no back up either. There is no baseband number on the status, and also no imei is showing.
What do i do?
alexj90 said:
i think the problem is with the fact i dont have an efs folder, and that there is no back up either. There is no baseband number on the status, and also no imei is showing.
What do i do?
Click to expand...
Click to collapse
One factory reset and test .
Two flash a stock rom via Odin .
Three paid for service repair .
READ THE BASICS .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
So I have a SHV-e160l note (korean) and I followed the steps listed http://forum.xda-developers.com/showthread.php?t=1924535 << there and once I got to install the kernel the phone would not do anything else. Its stuck on the galaxy note screen with the blue bar not filling the screen it like hangs on the last bit then boot loops!
Is there any way I can just revert it all back to normal? any stock kernel or thing I can flash to it? I did manage to get cwm recovery on it I just cant seem to think of anything at the moment. Thanks in advance!!
xtrubambinoxpr said:
So I have a SHV-e160l note (korean) and I followed the steps listed http://forum.xda-developers.com/showthread.php?t=1924535 << there and once I got to install the kernel the phone would not do anything else. Its stuck on the galaxy note screen with the blue bar not filling the screen it like hangs on the last bit then boot loops!
Is there any way I can just revert it all back to normal? any stock kernel or thing I can flash to it? I did manage to get cwm recovery on it I just cant seem to think of anything at the moment. Thanks in advance!!
Click to expand...
Click to collapse
You didn't perform a backup first? That sucks! Once you get it up and running make sure you make a backup. I don't have the same model as you, but I did a quick search and found this.
http://forum.xda-developers.com/showthread.php?t=1775015
I am ignorant and only know english so I can't translate the page. But I'm guessing there is a stock firmware on there somewhere. You'll have to do some searching and find it. Then install it to your phone. I hope that helps!
Stock firmware for Samsung devices can be found on the official site.
Samfirmware.com
440bro said:
You didn't perform a backup first? That sucks! Once you get it up and running make sure you make a backup. I don't have the same model as you, but I did a quick search and found this.
http://forum.xda-developers.com/showthread.php?t=1775015
I am ignorant and only know english so I can't translate the page. But I'm guessing there is a stock firmware on there somewhere. You'll have to do some searching and find it. Then install it to your phone. I hope that helps!
Click to expand...
Click to collapse
studacris said:
Stock firmware for Samsung devices can be found on the official site.
Samfirmware.com
Click to expand...
Click to collapse
Ok so now I am in a boot loop after this. It goes to the U+ logo then looks like its loading. The logo flashes and all then 3 min later it reboots lol. Oh man I am so screwed.
& IDK which firmware is mine =/
studacris said:
Stock firmware for Samsung devices can be found on the official site.
Samfirmware.com
Click to expand...
Click to collapse
This site doesnt have the SHV-E160L firmware
studacris said:
Stock firmware for Samsung devices can be found on the official site.
Samfirmware.com
Click to expand...
Click to collapse
I guess you didn't check that site like I did because his device isn't listed. Would it be listed as something else?
440bro said:
I guess you didn't check that site like I did because his device isn't listed. Would it be listed as something else?
Click to expand...
Click to collapse
http://www.gsmkhmer.com/index.php?PHPSESSID=bcb274b771d4df6cdd44c40d2a62ba69&topic=8171.0
this is the only thing I found and its even harder because its in Russian and what not. Im basically effin up the phone -_- lol..
Its just on boot loop and I want it out of that. How hard is it for Samsung to have stock firmware for the phone. when I had my evo there was a RUU file I would run and be done with.
440bro said:
I guess you didn't check that site like I did because his device isn't listed. Would it be listed as something else?
Click to expand...
Click to collapse
http://main.develoid.com:81/samsung/Galaxy/GalaxyNote/
^^^^ that site has a kies home file that I am assuming is stock firmware, BUT it does not load so I can download. IDK if it's my internet or just the file itself. anyone check for me? please!
It loads and downloads for me. Here's direct download link
http://main.develoid.com:82/samsung...ME_E160LKLJMA3_704944_REV02_user_low_ship.tar
440bro said:
It loads and downloads for me. Here's direct download link
http://main.develoid.com:82/samsung...ME_E160LKLJMA3_704944_REV02_user_low_ship.tar
Click to expand...
Click to collapse
does it give you the 18 hour download time too??
xtrubambinoxpr said:
does it give you the 18 hour download time too??
Click to expand...
Click to collapse
No, but it is 1.21 gig
440bro said:
No, but it is 1.21 gig
Click to expand...
Click to collapse
its saying my download time is 3 days >_<
Ive tried so many odin flashes.. I just want my phone lol..
xtrubambinoxpr said:
its saying my download time is 3 days >_<
Ive tried so many odin flashes.. I just want my phone lol..
Click to expand...
Click to collapse
The server that hosts the file is probably powered by a hamster running in a wheel.
MAJOR UPDATE:
I have no idea what I did, I tried updating with like 3 firmwares.. After awhile I entered recovery, got desperate, and hit a random option. Well it ended up reverting my phone back to gingerbread and now I am a happy camper to have my phone back!!!
First of all let me say I'm sorry to even have to post this. I've looked and I'm sure this question has been posted a million times. But a lot of it just looks like Greek to me.
I recently bought a Verizon Samsung Galaxy S4 and found later that evening that it was rooted.
It's running Hyperdrive and the latest version. Also has a TeamWin screen.
I'd really like to unroot it and return it back to bone stock. But I haven't had any luck finding the firmware or instructions on how to do so that a new guy could totally understand.
If someone could give me a step by step and where I can find the stock firmware, I'd be forever grateful.
Thank you for reading this and I hope you all have a great day!
FireHorsePhoto said:
First of all let me say I'm sorry to even have to post this. I've looked and I'm sure this question has been posted a million times. But a lot of it just looks like Greek to me.
I recently bought a Verizon Samsung Galaxy S4 and found later that evening that it was rooted.
It's running Hyperdrive and the latest version. Also has a TeamWin screen.
I'd really like to unroot it and return it back to bone stock. But I haven't had any luck finding the firmware or instructions on how to do so that a new guy could totally understand.
If someone could give me a step by step and where I can find the stock firmware, I'd be forever grateful.
Thank you for reading this and I hope you all have a great day!
Click to expand...
Click to collapse
Can you post what the baseband is?
It's under Baseband version in the about phone menu in settings.
Tru7h said:
Can you post what the baseband is?
It's under Baseband version in the about phone menu in settings.
Click to expand...
Click to collapse
my baseband is 1545VRUAMDK
Thanks!
Same boat - need help - fast!
Alright, I have a question first.
Do you want to keep your data or apps?
Tru7h said:
Alright, I have a question first.
Do you want to keep your data or apps?
Click to expand...
Click to collapse
It would be nice to keep my apps but if not , my contacts are backed up to my Google account
FireHorsePhoto said:
It would be nice to keep my apps but if not , my contacts are backed up to my Google account
Click to expand...
Click to collapse
Alright, just follow steps 1 and 2 from this guide: http://forum.xda-developers.com/showthread.php?t=2301259
I haven't used it myself but you should keep apps and data and be stock unrooted. If you have any issues or questions you can ask me or the OP of that thread.
Tru7h said:
Alright, just follow steps 1 and 2 from this guide: http://forum.xda-developers.com/showthread.php?t=2301259
I haven't used it myself but you should keep apps and data and be stock unrooted. If you have any issues or questions you can ask me or the OP of that thread.
Click to expand...
Click to collapse
Thank you very much and thank you for taking the time to help!
A No-Wipe will still leave remains behind of software. If you want stock follow what I sent you.
DarkMenace said:
A No-Wipe will still leave remains behind of software. If you want stock follow what I sent you.
Click to expand...
Click to collapse
I figured it would have removed the root access and the TWRP recovery and leave it in a mostly stock state.
FireHorsePhoto said:
First of all let me say I'm sorry to even have to post this. I've looked and I'm sure this question has been posted a million times. But a lot of it just looks like Greek to me.
I recently bought a Verizon Samsung Galaxy S4 and found later that evening that it was rooted.
It's running Hyperdrive and the latest version. Also has a TeamWin screen.
I'd really like to unroot it and return it back to bone stock. But I haven't had any luck finding the firmware or instructions on how to do so that a new guy could totally understand.
If someone could give me a step by step and where I can find the stock firmware, I'd be forever grateful.
Thank you for reading this and I hope you all have a great day!
Click to expand...
Click to collapse
Sent you some help as well.
Sent from my SCH-I545 using xda premium
Hey
I have Samsung Galaxy S GT-S7562
After rooting and flashing KyleOpen custom rom, the mobile worked just fine but there's no network while calling or receiving a call..
I went to maintenance service and they told me that it needs New main motherboard or something
I'd appreciate it if anyone can help
help
Amsoli said:
Hey
I have Samsung Galaxy S GT-S7562
After rooting and flashing KyleOpen custom rom, the mobile worked just fine but there's no network while calling or receiving a call..
I went to maintenance service and they told me that it needs New main motherboard or something
I'd appreciate it if anyone can help
Click to expand...
Click to collapse
I had the same problem and i appreciate it if you could tell me if u did find a solution to the matter please
i'm waiting for u =)
Please post your baseband version. You most likely don't have the correct modem. They specifically recommended to use or be on the XXBMD6 base before installing the rom in the Developer thread.
No Network. SHUCKS!
es0tericcha0s said:
Please post your baseband version. You most likely don't have the correct modem. They specifically recommended to use or be on the XXBMD6 base before installing the rom in the Developer thread.
Click to expand...
Click to collapse
Hello! I have Samsung Galaxy Trend S-7562, which was probably made in Malaysia. I got it as a gift. I wanted to install KyleOpen Rom and did install but I missed to be on XXBMD6. There is no network since. Later I again downloaded and went on XXBMD6 and again installed KyleOpen Rom. But the network didn't appear. I am so frustrated. My parents are not going to buy me a new phone which is very sad.
I went to costumer care of samsung and they said they are not able to fix the problem. I think the network problem is because of the wrong Kernel and Modem I am having currently. So are there any expertise who can help me. That will be much appreciated. Thanks!
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
sharad_g said:
Hello! I have Samsung Galaxy Trend S-7562, which was probably made in Malaysia. I got it as a gift. I wanted to install KyleOpen Rom and did install but I missed to be on XXBMD6. There is no network since. Later I again downloaded and went on XXBMD6 and again installed KyleOpen Rom. But the network didn't appear. I am so frustrated. My parents are not going to buy me a new phone which is very sad.
I went to costumer care of samsung and they said they are not able to fix the problem. I think the network problem is because of the wrong Kernel and Modem I am having currently. So are there any expertise who can help me. That will be much appreciated. Thanks!
Click to expand...
Click to collapse
I forgot to mention the baseband. My phone's current baseband is "S7562ZCMB2"
sharad_g said:
Hello! I have Samsung Galaxy Trend S-7562, which was probably made in Malaysia. I got it as a gift. I wanted to install KyleOpen Rom and did install but I missed to be on XXBMD6. There is no network since. Later I again downloaded and went on XXBMD6 and again installed KyleOpen Rom. But the network didn't appear. I am so frustrated. My parents are not going to buy me a new phone which is very sad.
I went to costumer care of samsung and they said they are not able to fix the problem. I think the network problem is because of the wrong Kernel and Modem I am having currently. So are there any expertise who can help me. That will be much appreciated. Thanks!
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I forgot to mention the baseband. My phone's current baseband is "S7562ZCMB2"
Click to expand...
Click to collapse
it support S7562XXBMD6 baseband
sharad_g said:
Hello! I have Samsung Galaxy Trend S-7562, which was probably made in Malaysia. I got it as a gift. I wanted to install KyleOpen Rom and did install but I missed to be on XXBMD6. There is no network since. Later I again downloaded and went on XXBMD6 and again installed KyleOpen Rom. But the network didn't appear. I am so frustrated. My parents are not going to buy me a new phone which is very sad.
I went to costumer care of samsung and they said they are not able to fix the problem. I think the network problem is because of the wrong Kernel and Modem I am having currently. So are there any expertise who can help me. That will be much appreciated. Thanks!
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I forgot to mention the baseband. My phone's current baseband is "S7562ZCMB2"
Click to expand...
Click to collapse
You can't just flash a rom based off of that. You need to either flash the entire firmware or you should just be able to grab the modem from the firmware, but probably best just to do the whole thing to make sure everything is set up as it is supposed to between the modem, bootloader, etc.
What should I do now?
Vaibhav Chauhan said:
it support S7562XXBMD6 baseband
Click to expand...
Click to collapse
Thank You! Vaibhav. Are you sure that it supports S7562XXBMD6 baseband? If so, the only thing I have to do is download this baseband and flash it through Odin, right (ticking the PDA) ?
Plus, In the board after removing the battery there is "S7562_C" printed. I think this my phone and there is NOT "Duos" printed on the top on right hand side on the front of my phone. I can't post the url due to some restrictions so here's the link: www (dot) techinsights(dot)com/DeviceProfileSF_AustinParts.aspx?TeardownId=1438
So can you guys assist me from the basic what should I do to get my network signal back on?
I appreciate your reply guys. Thank you very much.
sharad_g said:
Thank You! Vaibhav. Are you sure that it supports S7562XXBMD6 baseband? If so, the only thing I have to do is download this baseband and flash it through Odin, right (ticking the PDA) ?
Plus, In the board after removing the battery there is "S7562_C" printed. I think this my phone and there is NOT "Duos" printed on the top on right hand side on the front of my phone. I can't post the url due to some restrictions so here's the link: www (dot) techinsights(dot)com/DeviceProfileSF_AustinParts.aspx?TeardownId=1438
So can you guys assist me from the basic what should I do to get my network signal back on?
I appreciate your reply guys. Thank you very much.
Click to expand...
Click to collapse
sorry but your device is not s duos gt-7562
but its different so you can not flash that rom in your phone
So what Next?
Vaibhav Chauhan said:
sorry but your device is not s duos gt-7562
but its different so you can not flash that rom in your phone
Click to expand...
Click to collapse
So that means I can NEVER have network back again in my phone? As a "Senior Member" and all your experience what do you suggest me to do? I am so fu**ed up, mann! I just need to figure out what stock rom does it accepts with correct baseband right? Oh god!
http://nasirtech.blogspot.com/2014/01/s7562cznuana1-412-jelly-bean-firmware.html
A sign of relief.
Okay! A little sign of relief. Thank you es0tericcha0s and I will hit that "Thanks" button :laugh: Okay! So even though someone send my phone from Malaysia and I'm using it on Nepal. I should install the Chinese firmware because my phone is S-7562C, right? If Yes! I will instantly begin the download and do as instructed.
Thanks!
According to the baseband version you posted and this page here:
http://sampro.pl/firmware/android/samsung-gt-s7562/
the original firmware you had on it would have been the one from China on 4.0.4 unless you had changed that, which I am sure you would have known, but if it was working before, then it should be good to go.
Messed up.
es0tericcha0s said:
According to the baseband version you posted and this page here:
................................................................................................
the original firmware you had on it would have been the one from China on 4.0.4 unless you had changed that, which I am sure you would have known, but if it was working before, then it should be good to go.
Click to expand...
Click to collapse
Okay! All I did was downloaded KyleOpen ROM, flashed it and the Kernel. I lost the network here because I was NOT on XXBMD6 or whatever they wanted to be in. So i downloaded the XXBMD6 and again flashed it and installed KyleROM. Still No Network and I took it to Samsung costumer care here and i don't know what they did. I think they flashed some other firmware because, I think the baseband was not "S7562ZCMB2" before flashing KyleOpen ROM. So, do you think I/they changed my firmware? I forgot which baseband I was in. I sound like I know nothing.
sharad_g said:
So that means I can NEVER have network back again in my phone? As a "Senior Member" and all your experience what do you suggest me to do? I am so fu**ed up, mann! I just need to figure out what stock rom does it accepts with correct baseband right? Oh god!
Click to expand...
Click to collapse
i can only suggest you to flash your stock rom
Vaibhav Chauhan said:
i can only suggest you to flash your stock rom
Click to expand...
Click to collapse
So can you help me to find out which is my stock rom?
sharad_g said:
So can you help me to find out which is my stock rom?
Click to expand...
Click to collapse
i think this is for your phone
http://nasirtech.blogspot.in/2014/01/s7562cznuana1-412-jelly-bean-firmware.html?m=1
but check details your self for avoid bootloop or bricked phone
Im on new update on sprint note 3 with nothing but problems. Im trying to go back to nc5 but says no binary is selected. Is that the download ?do i need to get a new download
This is the set up now
shadricksimms said:
This is the set up now
Click to expand...
Click to collapse
Ok, let's take a step back here. You tried updating to the latest NH7, but have been having issues.
Can you be more explicit in what problems you're having? Are there a lot of FCs? Signal issues? Just saying that you've been "having issues" doesn't really point us in the right direction of how to help you.
How did you apply the update? Was it through ODIN or using the over-the-air (OTA) update? If you used ODIN, was it the Mobile ODIN or the PC version?
Hi i used odin when i done so my spc code went back to stock
shadricksimms said:
Hi i used odin when i done so my spc code went back to stock
Click to expand...
Click to collapse
Ok, now how about the other clarifying questions I asked... What issues are you getting on NH7? Can you describe them for us so we can help you?
When i used odin to udste my spc code was 000000 and when i went to 4.4.4 it went back to stovk
shadricksimms said:
When i used odin to udste my spc code was 000000 and when i went to 4.4.4 it went back to stovk
Click to expand...
Click to collapse
Ok, this helps us out a little bit... You had flashed your phone over to another carrier, then when you decided to update to NH7, it reset your SPC to the stock one. This is normal behavior when you ODIN flash an OTA, btw.
The first question I have is: What method did you originally use to obtain the SPC of 000000? Have you checked that thread to see if you can reset it to 000000 while on NH7?
It was on oooooo buy after the ota it was set back to stock
shadricksimms said:
It was on oooooo buy after the ota it was set back to stock
Click to expand...
Click to collapse
Yes, we already established that fact.
My question is: What method did you use to originally get it to 000000?
I used cdma workshop
shadricksimms said:
I used cdma workshop
Click to expand...
Click to collapse
Ok, so what you're really asking is: How do I get my SPC back to 000000 now that I'm on NH7? I assume you tried to use CDMA workshop (as you did originally) and it didn't work.
As I myself have never changed my SPC, I cannot answer this question. But after a bit of google searching, I found some resources that can help you.
This Thread has very good instructions on flashing over to another carrier, as well as an active userbase that answers questions (mocoyombiflash in particular is really good).
This thread has information on how to flash over to Relianve/Cricket/Metro, so it may have information which will help you.
I'd recommend being very clear when asking your questions over there, as not everyone is willing to go through 4 rounds of Q&A in order to understand what you're asking.
After the update all has changed its not the same
As for going in to full details I shouldn't especially if u have the knowledge of social codes and how to zero them out
shadricksimms said:
As for going in to full details I shouldn't especially if u have the knowledge of social codes and how to zero them out
Click to expand...
Click to collapse
I hope you find your answers on the other threads.
My statement on being clear was based on the original question on this thread:
shadricksimms said:
Im on new update on sprint note 3 with nothing but problems. Im trying to go back to nc5 but says no binary is selected. Is that the download ?do i need to get a new download
Click to expand...
Click to collapse
It had nothing to do with SPC and took a few rounds of back-and-forth before I could glean enough information about what you wanted help on. That's all I'm saying.
I wish you luck on flashing your phone back to SPC 000000.
Well after the update I can't write to the phone
After the update it won't let me write the nv items on it
shadricksimms said:
After the update it won't let me write the nv items on it
Click to expand...
Click to collapse
Then the appropriate question to ask on either of the threads I linked would be the following:
Hey guys, I had my phone on SPC 000000 using CDMA Workshop, but when I updated to NH7 using ODIN, it reset my SPC back to stock. I tried using CDMA Workshop on it while on NH7, but it failed to write the NV items onto it. I was wondering if there is a way to flash back to SPC 000000 while on NH7? If not, which software version to I have to flash back to in order for it to work?
Click to expand...
Click to collapse
It's still short and concise, but gives them all the information they need in order to help you out.