Q&A for [KERNEL][STOCK] 19-10-2014 AGNi pureSTOCK I9300 ULTRA SMOOTH
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][STOCK] 19-10-2014 AGNi pureSTOCK I9300 ULTRA SMOOTH. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can i install the kernel for 4.3 Stock rom?
file with virus
I have downloaded this kernel and in spite of it appers as .ZIP file, the downloaded file is an .EXE file
and antivirus informs it has the virus TR/Crypt.XPACK.Gen8
Have anybody had the same issue?
Thanks.
My best kernel so far
thanks man for all hard work ,keep it up
Hi!
hello everyone!
I would like to ask for help...
How i should flash this kernel? With odin? Tryied with odin, but file has to .tar or other, but not zip...
I was looking for tutorial, but didnt find anythink.. sorry about that.
Thank you.
Paranoid Android User
will this kernel work with paranoid android users
boot.img
i want file boot.img AGNI kernel for NO AROMA
Can you send
Paranoid User
Am new to changing ROMS and kernel
Am running paranoid 4.6 can i still change it with this kernel without harm
removal
how to remove this kernel from my phone and get back to stock kernel?
ROMS
Is this compatible with either HyperMax A or Why Buy an S5 ROMs?
Hi, i want to ask. Do this kernel works in Archidroid v3.0.2? Because when i flash the kernel i got the "com.android.phone has stopped"
@root-expert
Many thx m8!!!Now it works.
Cant change settings.
I am using latest version of agni pure stock kernel for my sgs3 jb 4.3 but i cant change cpu governors or anything else. when i click some another option it says root privileges has given to agni... successfully but when i click again for change same option i see that the default in use. what is wrong with me
and my firmware is ;
Date
2015-04-01
Version
Android 4.3
PDA
I9300UBUGNL1
CSC
I9300ZTAUGNK1
One question
Does this work with CM12 5.1 ?
Good job, i've tried and it's good kernel. But i've some different reactions after flashing boeffla about charging. It was so slow.
after flashing the kernel on S3 with aokp rom 4.4
i saw in the descrip that this kernel support external wifi ( OTG FOR BT OR KALI LINUX)
but i flashed it on aokp Rom and i got a loooot of screen bug and no wifi no sdcard reading no extsdcard reading ......... :v :v :v
so i would ask you if there is another rom compatible with this kernel and support LOOP DEVICE ( i use AOKP JUST FOR LOOP DEVICE ) XD
please help me and answer me ASAP
(i don t know how to compile a driver in a kernel )
And great work i hope i didn t abuse :v XD
No oNE to answer questions??? Well... i will ask and answer as well... So, Wanna back stock boot img? ok... Just extract boot.img from rom(Stock one or custom) and flash it thru adb folder with adb comm: adb
adb flash boot boot.img
or
fastboot
fastboot flash boot boot.img
....
Download Android SDK or just ADB fastboot folder, just Google it...
Mine question is, if anyone reading dedicated Q&A thread is: Does Agny or perhaps some other kernel works with SlimKat rom for Galaxy S3 I9300? Or just that OK stock one from Slim...? Thx and Enjoy it
Related
Is there a matrix of compatible baseband/kernel/ROM configurations? I tried using sirkay's boot_9.587c - ICS - xKernel v9.587-C, flykernel0_6, and flykernel0_8, but they all caused reboot cycle (bootloop) with CM9.1 FXP 142.
I had to extract boot.img out of the FXP zip file and flash that kernel to successfully load up CM 9.1. Incidentally that kernel version is 2.6.32.9-FXP. FWIW, I was upgrading from CM7.2 RC1, updated baseband from D-64 to G-77 before flashing kernel and then CM 9.1.
Ideally I want to use the fastest kernel out there compatible with CM9.1, and one with Linaro would be ideal. Any suggestions?
Am I missing something, there's a whole topic specifically for questions ... [HELP] Q&A Thread - MUST POST ALL QUESTIONS HERE [ 1 2 3 ... Last ]
...I'm new here but it seems some people either can't read or just cba.
Yes there is Q&A thread!
Anyway for CM based ROMs you have to use CM kernel otherwise you got bootloop... i've heard AOSP/AOKP is compatible but i never tried it myself
Q&A for GT-I9100 [Development] Resurrection Remix 4.4.2 KitKat v5.1.5 [14/06/09]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for GT-I9100 [Development] Resurrection Remix 4.4.2 KitKat v5.1.5 [14/06/09]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't download Ressurection Remix from Dev-Host
Hi,
Today i tried downloading Ressurection Remix, but my download got interuppted twice.
Please post optional download mirror like MEGA.co.nz
Thx
Samsung Keyboard on Resurrection Remix 4.4 for s2
Hi.
Please help me!
I really love this rom! but only thing I missing is keyboard from s2 jelly bean.
Is it possible to install this keyboard on 4.4?
I was looking for it for couple of weeks and I didn't find anything.
Does anyone knows how to make it work?
Download link?
Hello,
The mirrors for both the rom and gapps don't work. Well, the mirrors do work, but the download links do not. Are there any othere locations where I can download it? I have searched the thread, but can't find any working link. The rom looks great and I really want to try it out. Any answer would be great. Thanks.
شكرا
شكرا جزيلا لك / واتمنى من اكمال الدعم لهذا الموضوع الجميل .
:dشكرا لك مرة أخرى
Please
installed cm 11 on my gt i9100g but it doesn't boot to rom
keeps restarting to recovery mode
Sent from my SM-G900P using Tapatalk
_superman said:
Please
installed cm 11 on my gt i9100g but it doesn't boot to rom
keeps restarting to recovery mode
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
use different ROM for your GT-I9100G
Format: system partition
wipe dalvik
install new rom simple
quickpanel
hello
I wanted to ask
in quickpanel can change the color?
problems with the incoming calls
Hi there,
i falshed this room and I've been noticing a problem with the incomming calls, when the phone is locked and i receive a call i can answer it with no problems, but when the phone isnt locked (when i am using the phone ) and i receive a call i cant answer the phone, it shows me a pop up with a contact face but no where to answer, i ve attached a screenshot to show u guys what is the problem..
I've wiped data chach and everything but i still get this thing work.
Thanx alot for the helpers!
Erorr
When Im installing this ROM allway I get Status 7 !!
How I can fix that and why Its allways do this?
installed rom and it'es working fin only one probleme . my batery is at 15% and it says 8 hours to charge what's the solution or is it a bug!!!?
Great ROM
I like this 4.4.2 ROM even nowadays when there are 5.1 roms already!
During the steps for "Extended steps to install the ROM", it is said:
"9. Fix Permissions"
What does it mean?
Thanks...
gapps
can i install fresh gapps from cm12.1
(gapps-5.1-2015-06-02-15-19.zip)
when i install i have error (aborted) ,Why?
ps / i have rr 5.4.6(stable)
spartaque12 said:
can i install fresh gapps from cm12.1
(gapps-5.1-2015-06-02-15-19.zip)
when i install i have error (aborted) ,Why?
ps / i have rr 5.4.6(stable)
Click to expand...
Click to collapse
No, you need a gapps package that is compatible with 4.4.x. Those are for lollipop android(5.1.x)
If you haven't got other gapps, you choose some from HERE
[Q&A] [ROM][CM7.2][RC4] Reincarnation Rom Series v.5 | Touchwiz Nature UX Edition [2
Q&A for [ROM][CM7.2][RC4] Reincarnation Rom Series v.5 | Touchwiz Nature UX Edition [22/02/2014] | Patch Call Audio Added
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM7.2][RC4] Reincarnation Rom Series v.5 | Touchwiz Nature UX Edition [22/02/2014] | Patch Call Audio Added. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bug
Hello Sir,
There Is A Bug In This ROM .. When I Turn On Rotation its Dont Show Right One When I Pick My Phone Verticaly The Screen Shows In Horizontally Plzz Chk This Issue
Fix the basics of your rom
Your rom is ****. When I get called or when I call, it just freezes. When I put in my headphones, the audio keeps playing from the speakers. Same thing when I connect to my bluetooth speaker. The rom is slow as **** and when I try to set the cpu settings to another setting (performance or ondemand(which I need because the rom is so ****ing slow)), it resets every single time I reboot. Maybe its the kernel but im holding you responsible because you recommended thunderkernel. Also I really do not understand why all these morons say that this rom is any good. I'd rather have the stock rom than this ****.
Ofcourse the first things that comes to your mind is: 'bweuhhh, just buy another phone then'
At the moment I'll just have to do it with this ****ty device. But at least TEST YOUR ****ING ****
i followed all guide, when instaled this rom and i reboot device ,that Stuck on the samsung logo and nothing happening
whats problem?
I have highest respect for OP, but this Rom in my opinion should not be marked "stable" as only few positive feedbacks "Reincarnation Rom Series v.5" received from customers. ( We are aware of the fact that CM7.2 RC4 kernel has some well-known bugs due to nature of cyanogen-mod.However this one contains so much bugs i don't know where to begin though).
without undermining attitudes and intentions to violate our Rules, I must say the best word which describes this CM7.2 RC4 based Rom is "underdeveloped". I urge viewers to get more "stable" Roms such as "ACE-I-SCAPE" till everything settle down :good:
@alipahlavi, This Rom was ported for Ace GT-S5830i/C/M/39i device ( Cooperve) Are you abseloutly sure we are on the same page, before I start pinpointing the root cause of your problems ?
Android version ; Kernel version of your stock device ; PDA/CSC/MODEM information of your stock firmware you were standing ( not so sure,,sammobile.com database is the source)
Are you come from stock Rom/Stock Based Custom ROM or you flashed from CM7 Based ROMs ?
What kernel did you use , after mounting the corresponding partitions (FYI: when something is mounted then it will show "unmount" inside your CWM,If it shows "mount" then it is not mounted )
Before I go further, we need to get you out of boot loop ( assuming you are stocked in splash screen and only access to Download mode ). Study this post please. If your initial problem wasn't resolved ,I will instruct more hints .
i tried to install this ROM on my SGA s5830i which was runnung touchwiz resuurection v10 fine. Installation went fine but in the end it said ROM installed , status=0 After selecting reboot now ,it was stuck on the samsung galaxy ace blah blah blah menu. so I got the thing into recovery mode and installed the stock rom(wich i have tried before to unbrick and worked fine).but the stock rom flashing gave no good results just left a boot loop. Have any ideas. any solutionn would be great!
thanx
@droidprob, Status 0 Errors mostly caused by incorrect mount procedures as I explained some of the symptoms in post above though. For reverting back to your stock Firmware , you can follow my advice @ post#6 for step-by-step instruction of using your wipe flash-able package in correct fashion.
Hope I did help you
Its okk
i ran back to stock and installed touchwiz resuurection so thanx for your help!!!
GT-S5839I installation
Hi, I'm new to all this so please make allowance.
I flashed this ROM to gt-s5839i and the ROM is very good, but I experienced some major bugs. I have since removed the ROM from the phone and realized that I forgot to flash the audio zip, so this may have fixed the head phone problem?
Bugs experienced:
When plugged in, the headphone was detected but sound continued to come from the phone speaker and was not directed to the headphone jack.
The camera application crashes on start up.
The FM radio application possibly doesn't work, couldn't be sure because of the headphone bug but it didn't work on all the other cm7 ROM's I tried.
I would love to be able to use this ROM, are any updates likely?
@ehsanotaku, my phone is s5830i and come from stock rom and kernel
whatever i sold that yesteday
Q&A for {Pro}[DEV][KitKat 4.4.4][CM11.0] iyokanLX - Custom LegacyXperia CM11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for {Pro}[DEV][KitKat 4.4.4][CM11.0] iyokanLX - Custom LegacyXperia CM11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Which Kernel?
Which kernel should i use for this rom? Am a beginner so am not sure which kernel to use. Am coming from stock rom and kernel. Never have rooted the phone before.
if one use this ROM , upload screenshot please ...
jairamr said:
Which kernel should i use for this rom? Am a beginner so am not sure which kernel to use. Am coming from stock rom and kernel. Never have rooted the phone before.
Click to expand...
Click to collapse
Don't start with this ROM. It is experimental and obsolete. Try the latest LX cm11 builds.
pteek said:
Don't start with this ROM. It is experimental and obsolete. Try the latest LX cm11 builds.
Click to expand...
Click to collapse
I started with CM10. It seemed to have so many bugs.. SO i installed this one and now been using this for the last 1 month. Having some issues with battery drain. On stock my phone stood around a day apprx and now its staying around 12-15hrs .. Is there any fix regarding this? I had tried removing app permissions for major apps that used location frequently. IS there anything else that i cud try to improve my battery?
Anyway super ROM! enjoying Kitkat .. Thanks a lot developers .
Q&A for [Rom][Unofficia][Lollipop 5.1.1] Cyanidel RC-11(5.1.1)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Rom][Unofficia][Lollipop 5.1.1] Cyanidel RC-11(5.1.1). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
ƒεηιx said:
Yes
Click to expand...
Click to collapse
Hello everyone,
I have an Xperia Ray (ST18i) that was initially on its latest stock ROM (ICS I think...).
When I saw this thread, I was tempted by testing the ROM and I did...
So I unlocked the bootloader via the fastboot technique (officiel technique via sony website) and after the first flash, it got stuck on boot logo (Cyanide L animation) so I reflashed and then, problems began...
Here are the things I've tried to fix the phone (wiping everything, everytime...):
- Made a 2Gb Ext4 partition on the external SD-Card
- Reflash stock firmwares (I tried them all) --> stuck on Sony/SonyEricsson logo on boot
- Reflash cm9, cm10, experimental cm12 --> When done right after flashing a stock firmware, the phone boots but the touchscreen won't work (physical buttons do work) and apparently the phone don't recognize the sim card (no gsm signal)
- Reflash the Cyanide L rom (afte reflashing stock) --> phone boots but the screen becomes crazy (spinning, reverting) and touchscreen don't work.
So at this point, I can't have a working phone. I read in this forum a solution for a similar problem but for the Xperia Mini (http://forum.xda-developers.com/show....php?t=2220290)
I tried to connect via recovery to adb and I managed to get su privileges, but the rmi4_fwloader don't exist apparently for the ST18i (Ray) I found instead a /system/bin/bq275xx_fwloader (duh), I truly don't have a freaking idea about what it does but I tried the same command line but replacing the "rmi4" by "bq275xx" and the touch_module_id_0x32.img by touch_module_id_0x11.img (there are 0x01 and 0x02 also in st18i roms) --> nothing changed, I have the same "boot-freeze-for-stock-roms/touchscreen-ko-for-custom-roms" problem.
I tried to flash an Aroma-based custom ROM again with no success, I even tried to flash an Xperia Active ROM (solved the problem for Xperia Mini Pro) apparently.
A weird thing though, in Aroma installer, the phone is detected as Xperia Neo/Neo V MT11/MT15 !! And when installing the cm9 ROM, I got an assertion failure saying that the phone is not a st18i/urushi ! Is it possible that somehow, the device name has changed when flashing a bad ROM (the experimental Cyanide L) ???
I really really need your help guys
Thank you in advance !
I am getting some erorrs when i try to flash the rom,any help please?
Thank you - 5.11 can work on Arc S!
Thank you so much! I've been running Jb Roms for a while and tried both KK and LP Roms but the advantages of UI were always wiped out by lag so was beginning to think our dear phone had reached it's best with JB roms but you have given me new hope! Both this Rom and the Candy one work more quickly than the other LP roms I've tried. Still settling in but first impressions are really good so thanks.
does it work on Xperia ray
im already using CM11
what whats is the gapps for this xperia ray