Related
I just recently got my 3vo and i need a case for it, never been a big fan of the otterboxes (just seem too bulky). I need a case that looks good and gives some protection.. i have a 2 year old that loves to play with my phone.. But im not sure what to get.. I dont work in construction or take my phone on any extreme sports, but i do forget my phone on my lap in the car all the time and go to get out and boom it hits the ground.. so i do need some protection..
So far this is the one im likeing
http://www.seidioonline.com/product-p/csk3hev3d-wh.htm
If you have a Best Buy near you, you can go there an try on some cases. They carry the one you posted too.
I had that case for my Evo 4G and I liked it a lot. Very nice case. The ones at Best Buy are named Pt, but they are made ny Seidio for Best Buy. Same exact case, just a different name stamped on it.
Sent from my PG86100 using XDA Premium App
The casemate tough case is pretty nice. It's not super big like the defender but its not slim either. But it looks nice, fits great and protects well. I got mine off ebay for about 22 bucks new. Well worth it. I also have the seidio active but prefer the tough case and haven't taken it off for the last 2 weeks or so except to clean it.
Sent from my PG86100 using XDA App
I'm still waiting for the Ballistic Case for the Evo 3D to make its appearance on their website; waiting on the HC version.
The CaseMate's look pretty good as well. I've seen good reviews for the Tough Case that they make.
However, SLM is correct. Go try out the Platinum cases at Best Buy before you take the plunge with the Seidio case. It costs $34.99 at Best Buy for the same Seidio one you're interested in.
I'll tell you from experience that I have the Platinum case (a.k.a. a rebranded version of the Seido Active case), and it's pretty sweet! Rumor has it that Best Buy will also be getting the Seidio 1900 mAh batteries as well, but they'll too be rebranded as Platinum. The case I got is excellent and slimmer than the Otterbox cases. It comes in two pieces. You have a silicone sleeve with a felt-like interior that wraps around the phone, and then you have a strong plastic skeleton that wraps around the sleeve. Although the case is great, there are a few things that I don't like about it. For one, if you keep your phone in your pocket like me, you'll start to notice pocket lint collect around the edges of the case. Also, it's sometimes hard to press buttons around the edges of the phone. For example, I use Swype, and when I have to manually type in a word instead of swiping, it can be difficult pressing letters such as P or A. I'll accidentally hit the O or S keys. But it does offer damn good protection. I've gotten so accustomed to the case that it's just weird to hold the phone without it. The case also protects the dual cameras in the back. I have no clue why HTC decided to have the cameras stick out, but this case offers protection for them. As far as my pocket lint issue goes, I think I might invest in a holster for the phone. I'm not sure if Best Buy sells the Platinum branded holster that is compatible with the Active case, but I'll look sometime this week and let you know. I use my phone as my primary music player, whether it's mp3s stored on the phone, FM radio, or Internet radio, and I think that having it on my hip instead of my pocket will be a little bit more convenient for me.
As far as cases go, I've only seen the Platinum case with the black skeleton being sold at Best Buy. Seido sells their Active case with different colored skeletons, but the sleeve still remains black. I'm kinda disappointed Best Buy didn't sell the burgundy skeleton. I think it would've looked nice on this phone (I'm a fan of dark red colors.). If you want something more rugged, Seido sells on their website the Surface case (a hard two piece plastic shell available with or without a kickstand) and the Convert case. If you plan on drunkenly abusing your phone or chunking your phone at the wall after a pissed off conversation, I recommend the Convert case. It's like a combination of the Active and Surface cases. The inner layer is the Surface case, and then it's wrapped with a silicone sleeve and skeleton like the Active case. It also has a detachable cover for the rear cameras. To top it all off, the Convert case comes with a precision-cut screen guard. I don't really need all that thickness and protection, but I would put money down that the Convert case holds up to its name. If you plan on getting an extended battery though, make sure you get an extended case since the regular cases won't fit with the extended battery door.
Anyway, I hope this helps. Good luck shopping for the right case!
I bought a silicon case with the wave. Protects camera, wich had to be protected since it sticks out. Also protects the other buttons and seems to fit well...
Its only 1,50 dollar so thats not a bad deal.
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Only one downside, almost every 3vo owner has it
Red Body Glove case
I have the Body Glove case in red, and I like it a lot. It is a nice looking case.
I have no issues with mine unlike some others, but check out the pictures here:
http://forum.xda-developers.com/showthread.php?t=1141005
The available colors are Red, Blue, Gray, Silver, and maybe White too.
Thank for the info guys im going to head to beat buy today and check it out..
butterbuns said:
Thank for the info guys im going to head to beat buy today and check it out..
Click to expand...
Click to collapse
Sounds good, let us know what you decide. Bhambalek said they only have the black skeleton shell at his Best Buy. My local Best Buy only had them in white. Maybe yours will have both so you'll have options. Good luck!
Sent from my PG86100 using XDA Premium App
Just unpacked and put on my Seidio Active with holster, got the saphire blue from Versio Mobile on Amazon, 34.49 shipped.
Very nice case, fits very snug, like the inner skin and outer skeleton, holster is very solid. Only complaint, that the camera glass is not protected; probably order a carbon skin so I can throw some protection on that glass. Had a TPU on her since day one and glad I upgraded to this one.
Delano.888 said:
The TPU case is really awesome. It's on ebay and really cheap! Just search ebay for "evo 3d tpu case"
Click to expand...
Click to collapse
I also like and recommend the TPU Skin Cover Phone Case for HTC Evo 3D http://www.amazon.com/TPU-Cases-Flexible-Sprint-Retail-Packaging/dp/B0053NWDO0
I have the Sedio Surface case and am happy with it. Decent protection and it has a kickstand also.
I posted a review on sprintusers, but dont know the policy here about linking to other forums.
i picked up the PT Cruiser case yesterday, i was able to get the black and white one that i liked.. Now i first off the bat i really like the look and feel of the case, but i dont like how the phone fits in the rubber sleeve, its not a real snug fit. So i can see pocket lint and other things easily able to get inbetween the phone and the rubber side, but other then that i like it so far.. Its still a lil early to make a final decision on the case..
But again thanks for everyones responces, i have to say this site really does rock!!
one word: otterbox defender. Ok so that was 2 words.
I have four requirements:
(1) Decent protection all around except for screen.
(2) Protection for the camera.
(3) Must lie flat and not wobble when typing w/phone on table.
(4) Must not make the phone significantly fatter (otterbox is OUT).
Anyone have any suggestions? I actually like the gel case from Sprint but it doesn't protect the camera.
Mike
i like seidio case the best
i've tried all sorts of cases and I keep coming back to my casemate tough case, can't go wrong with that one. It's not that bulky and offers just the right amount of protection without having your phone inside a vault like the defender.
Seidio Active or Platinum Cruiser. I had the Seidio on my Evo 4G for a year. Get the holster from Seidio to prevent the lint issue and clip it inside of your pocket. Something that nobody mentioned is that the rubber bezel allows you to set the phone face down without the screen contacting. That also makes it slip resistant and prevents an unattended ringing phone from vibrating off of the desk. Not too much bulk either.
Sent from my 3vo using XDA Premium App
Ok, I finally got my Otterbox Defender today. First impression is that it isn't exactly the way I thought it would be. I am not sure exactly what I was expecting but I know it wasn't quite what I got.
Pro: plastic shell feels pretty solid around phone and I really like the way the solid clear protector covers the whole screen it makes me feel a lot less worried about messing up my phone. The silicon/rubber outer sleeve holds the two halves of the hard shell together and gives a good grip. There is no way for it to fall out of the holster.
Con: my biggest complaint would be the silicone/rubber outer sleeve feels a bit sloppy. I would have expected it to be tighter, more exactly form fitting. The outer sleeve also picks up every piece of lint that comes it's way and because it is a black case white pocket lint shows very well. It is very difficult/awkward to remove from the holster, that may get better over time as out gets worn in a bit.
Conclusion: pretty good case that should do it's job but over priced at this time, at $10 it would be a deal, at $15 it would still be a good value, at $20 it's something I would consider and at the $30 I paid after shipping and handling well I feel like I over paid but I don't feel like I was robbed. I will be keeping it.....for a while at least.
***EDIT***
Ok after playing with it, the fact that the soft outer case is not super tight is not as annoying as the lint sticking to the outside of it.
Sent from my MB855 using XDA App
I have one and have to say the biggest issue is the bulk.
It pops into and out of the holster so simply it's disgusting....dunno why you had problems there ?
If you spend a few moments and make ABSOLUTELY CERTAIN that the soft rubber/silicone outer shell is on properly it is not loose in the slightest. It is in fact quite snug. It's a bit trying to get it on perfect, but it's time well spent..
My complaint about it is when you use the holster as a vertical stand and have the phone facing outwards with the charger cable plugged in...the little flap that covers the charge port is not quite in the correct spot (you'd have to try it and see it for yourself, very difficult to explain).
The holster snap/clasp thing is in the way of that formentioned flap.
Not a deal breaker....I will be keeping the otterpop.
editater>
BTW, it's a holster made to go on your belt or the waist of your trousers....why are you concerned with lint sticking to it when it should never see any lint if used in the fashion it's intended for ?
Well after a little time I figured out why it WAS loose and had went on WAY too easy.......you see I live in a desert.....and it's summer AND my case had gotten stuffed in my mail box for oh at least a few hours before I got home and went to put it on. Now after both it and I have cooled off and had a kick a$$ nap, it fits quite well. Since it's little baking in the desert episode it may never be as tight as it would have been but it is very snug over all and no longer has any gaps or bulges.
As for the holster.....maybe it is because I am left handed or maybe mine it's just extra tight in the holster, but it is a chore to get outso I put it in my pocket.I may try to work with the holster some but together with case and holster it's pretty dang big. I will use the holster on a limited basis more then likely.
***EDIT***
Since I don't really care for the holster I still feel I over paid, but since the soft cover fits better now I don't feel I over paid quite as much.
Sent from my MB855 using XDA App
Personally speaking, I wouldn't use the Defender for day-to-day protection. There are many other options available which offer less bulk and less lint-grabbing.
The Defender is perfect for rough users such as construction workers, farmers, soldiers, truck drivers, etc. The Defender has protected my MoPho twice already while on duty. Both were scenarios where I feel a 'lesser' case may have allowed damage to the device.
$30 is nearly a third of the cost of replacement under insurance. It is a tad on the expensive side. However, I think this is the very best level of personal device protection short of encasing it in a brick of silicon gel.
Compared to the defender I had on my evo the photon defender is perfectly tight. I went straight to radio shack and bought the defender after I bought my photon at sprint 3 days ago and I've only taken it off once to install my new sd card yesterday. As far as it sitting in the holster just make sure you push the rubber in all around the mounting clips on the sides. If they stick up a little it won't secure correctly. I've used defender cases before so I knew what I was getting but I must say this one is very well built.
The only thing that I don't like about the defender cases is that the screen protector just seems to take away from the beauty of device screens. I had my evo in a defender case for a week. I took it out one day and once I saw the screen again I was floored to how much I was missing by having the defender plastic over it!
And boom goes the Shooter
I've had the defender for 3 weeks now and I love it but it isn't for everyone. If you want a somewhat rugged smartphone that can take a few drops there are plenty of cases for you to choose from. If you want a case that protect your phone from falling out of a speeding vehicle then you want the defender, I should know i accidentally left my phone on top of my vehicle when driving away one late night.
It is bulky but that is fine, I don't want a sleek phone that breaks. This thing is like a brick. If you are playing around with the software and usually bork your phone you may want an easier to remove case. I hate doing battery pulls because it takes too long to remove this case and you end up with too many parts in your hands. This case is my insurance policy. Its a great case for people who play hard with their phones. The commuter case is a great case too but you have to match the case to your lifestyle. For me, I wont buy a phone that doesn't have a defender case.
In my experience the phone does not move around inside this case. It stays locked tight in its plastic shell. The rubber can be stretched easily but it is form fitting to the plastic shell and has just enough play to make it comfortable to remove. You have to tuck the rubber in all around the phone, as well as on the sides and on the back near the kickstand. Failure to do so will cause it to shift around but if you properly put this case together it shouldn't move at all. If it does then you may want to call Otterbox.
Now the defender series comes with the adjustable holster. If you do not use a holster then you may want a commuter series case. This thing isn't too easy to get in and out of your pocket since the rubber does grip well to cotton pockets. I use the holster about half the time and keep this thing in my pocket the other half. I'm okay with this but if you wear really tight skinny jeans you'll probably hate this case. So if you don't use holsters or you wear skin tight pants then you should get something else.
The screen protector causes glare and degrades the visual quality of the screen. The camera lens also has a protector over it which I find does degrade the camera quality if it is not properly cleaned. I don't find this to be a deal breaker because I could easily remove that piece of protective plastic. If anything I wish it was removable and replaceable out of the box.
Its a great case that can take a ton of abuse and leave your phone looking brand new.
sub2k1 said:
This thing is a brick.
Click to expand...
Click to collapse
I cringe at your use of this term!
Car Dock & case.
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
I never tested it on the car dock but I can guarantee you it does not work with the HD Dock. While it is not too difficult, you don't want to disassemble this case on the regular. Reassembly is a *****.
droidevo1 said:
Is the Defender series compatible with the Car dock? If not how easy is it to remove.
Click to expand...
Click to collapse
No, I can tell you it's not compatible....I have the Commuter and it doesn't even work in the Car Dock.
I was hoping that by taking off the outer rubber shell of the defender series, that maybe the hard cover would still fit in the car dock. I'll let you know in a few weeks when everything finally arrives in the mail.
Yeah, let us know.....I even bought a cheapo $5 case (the thin plastic ones) just to try it.....nope!! Wouldn't work.
Yeah this case is still a lint magnet even without putting in my pocket and now I have some dust between protective screen and the actual screen.....of course some compressed air took care of it but I had to open it for that. I also worry a bit about heat while tethering. Not that it gets anywhere near as hot as my htc hero did (could fry an egg on it) but if it got warm enough to feel trough hard case AND the soft rubber it must have been pretty warm inside (does it get hotter doing wifi tether as opposed to usb & which uses more battery).
Sent from my MB855 using XDA App
Does anyone know what the difference is between the $50 Defender (Revision A) and the first revision that other sites (other than otterbox.com) sell? The difference in the model # is the letter A at the end.
Can someone post pictures of this case on their phone? I have always bought otterbox defenders but im debating if i should buy another after a bad experience with the one for the Evo 4g.
Sent from my MB855 using Tapatalk
I don't think a picture will do it any justice. It is one of those things you are really going to want to see and touch in person to decide if you like it or not. I like mine, lint magnet and all because it makes me feel my Photon its safe and for that I am willing to live with the trade off of some lint and a little extra bulk. Of course every time I take off the case to clean it I remember just how sexy a naked Photon is and I consider slapping on an invisashield screen protector and going naked.
Sent from my MB855 using XDA App
I just received my otter box defender in the mail today. I bought mine at amazon for $27 + $5 S&H. The case appears to be genuinely an otter box. The box it came in was damaged and opened, but the case itself is fine. My guess is that the amazon ones are cheaper because they are in damaged boxes.
As far as I'm concerned though I'll take the damaged packaging for the $20 savings.
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
IUH1991 said:
Bought the Defender last month and was enamored by the fact that i can throw, kick, slam the phone anywhere and it wouldn't get damaged. The only problem was (and this was a big one) that the case is so f***ing huge for regular use! I got fed up of that and exchanged the case for the commuter. SOOO much better for everyday, common hazards.
Click to expand...
Click to collapse
Bugger, just ordered the Defender, does it really add so much bulk?
Sent from my MB855 using xda premium
Has anyone tried this case? What are your opinions on it. The only thing I feel is lacking is a kickstand to angle your tablet towards you, like the journal/portfolio type cases do.anyone haves solution for this? Or know of a case similar to the aegis that will do what I'm describing?
http://www.goodandevo.net/2011/09/review-trident-aegis-case-for-the-htc-evo-view-4g.html
I've. Read that review. Its one thing to read a review written after one day's use and another to hear the opinion of someone who's been using it for a while.
But I'm still looking for a similar kind of case with a kick stand.
I have one and I really like it. I love the detachable stylus holder. I can remove it when I want to game or otherwise use the tablet in landscape mode. It does offer good protection.
How much bulk does it add? Does it collect a lot of dust?
I ordered one and I should be getting it today or tomorrow. I'll update this thread with a quick opinion soon.
Sent from my HTC Sensation 4G using xda premium
I posted a long reply with a link to a picture I took of the case and when I posted, told me I can't post links yet and nuked my whole reply..
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
m00nelph said:
(Ok, had some food and time to retype my post)
I've been using one for about a month now, I tried a few of the protective "hard use" cases out there hunting for the most protection I could find for my View but had no luck till I found the Aegis.
Overall its been great, I'm ultimately waiting for the Defender from Otterbox to come out as I need the most protection I can get for my device but this will do nicely till then for the most part.
They did a good job of of making the case fit the Evo View tightly, making for a pretty svelte case for the amount of protection it gives.
One small thing about the fit, the bottom lip of the silicon part catches on things sometimes and has developed a tiny bit of sag because of it but it's nothing major. I can't post links yet but if you look at the pic I posted at umf dot net/View/View_Aegis.jpg you can see the slight sag in the rubber part along the bottom edge of the screen (hope the pictures not too blurry)
As far as smudges, its held up pretty well on the rubber parts, some smudging but most of it "rubs" out with my finger if I really wanted to clean it. The hard plastic parts of course look pretty much new but then again I put the device
inside a small Maxpedition pouch before throwing into my pack so I don't exactly "abuse" the case.
So all in all, while its not Defender or Ballistic HC level of protection, for the minimal bulk it adds it's still a very sturdy case and works great for "around town" I still plan to purchase a Defender case for "in the field" type activities (hopefully Pelican or Otterbox will come up with a water/crush proof case to fit 7" tablets into for more "extreme" activities) but I am very satisfied with the Aegis as well and will continue to use it whenever I don't need that ultra level of protection (or bulk) that the Defender will provide.
Hope this helps!
Click to expand...
Click to collapse
Thanks a lot! I acutally ordered mine a few days ago, and I expect it to come tomorrow. I'm replacing this leather folio case for the Aegis. One thing I will really miss is the flap that covers the screen as well as the ability to have the tablet angled up like a stand. Its very convenient when I'm reading at a desk or watching a movie.
Yea I guess that's the main reason I still kinda baby the View while in the Aegis case, the screen feels vulnerable. A hard plastic cover that snapped on the front that also somehow snapped on the back and provided a kickstand would pretty much cover all the bases.
I just ordered one, should be here tomorrow. Got tired of waiting for Otterbox to get their **** together. Would love to see Ballistic make a case for it, but they probably wouldn't see a return on the investment of case design and manufacture for this tablet.
Got it!! It's a little fiddley around the volume and power buttons, but once you get that worked out, it's not a bad case!
yea I posted on both Otter and Ballistics Fb pages and at first both said no, was happy to see Otter decide to make a defender but yea, a Ballistic HC style case is what I would really like so I can just toss it in my pack without a second thought.
I have a Trident case and it is OK...not as heavy duty as a Kraken case or even a Cyclops but my 5 year old stood on it and has tossed it around a bit on the carpet and it has been fine. Was I upset? Yes! The case is more for protecting against scratches and light bumps....not for a little rockstar in the making!
I own the aegis case and it's nice. Keeps my device safe and i paid $25 for it from Amazon. Looking forward to a defender series but in no hurry now
Sent from my Nexus S 4G using XDA App
I was hoping for a Cyclops series Trident case but since Aegis is all they offer I grabbed it from amazon for $25 and I'm pretty happy with it.
It was a bit of a pain to get the hard plastic shell over the silicone case (I entered hboot several times) but since I've had it on, I really like it. I just wish they didn't leave that bit of an exposed area if you don't use the stylus mount.
I was between the army green, red or cyan blue, and went with the cyan blue. I like the contrast, and it looks great.
Good
thanks but plz learn me
I wanna buy a case for my Atrix. My budget is small (around $5-$10).
So which one would you reccomend me?
Thanks!
I like the basic TPU cases. They don't add too much bulk and don't collect dust, but protect the phone from dings and scratches. They also have a lip around the front, so if the phone is set on a flat surface the screen won't actually touch the surface. It will make your phone somewhat warmer though, but pretty much all cases will probably do this, and it probably won't protect your phone as well as some of the larger cases. The case I use is $2.86 shipped from amazon and fits perfectly. I also have an otterbox but use the TPU case since its smaller, and doesn't collect dust like the otterbox. I know a lot of people like the otterboxes though. The jelly silicone cases are also dust collectors and tend to stretch after a while so I would advise avoiding any of those. If you look through this accessories forum you will see a lot of threads about cases that usually have reviews and pictures, so I suggest you read through some of those threads and find a case that looks good to you and sounds like what you are looking for from the reviews.
I would also suggest getting a screen protector. While the atrix does have gorilla glass, it is not truly unbreakable or unscratchable. While some may argue that its not really necessary, it costs a few dollars and has the potential to protect your phone's screen from scratches.
Great! Btw can you give me the product link you bought from Amazon?
I found this one: http://www.amazon.com/MOTOROLA-ATRI..._1_3?s=wireless&ie=UTF8&qid=1321000892&sr=1-3
But it says its a Gel Case (I don't TPU & Gel Cases are the same or not! )
If you need a strong case for a low price (there's better out there but well outside your price range) you can get a refurbished Otterbox Defender for $12 shipped:
http://www.all4cellular.com/otterbox-atrix-4g-defender-series-case-holster-black-refurbished.html
Edit: Yes, I bought one from these guys. It's legit.
treehumper said:
If you need a strong case for a low price (there's better out there but well outside your price range) you can get a refurbished Otterbox Defender for $12 shipped:
http://www.all4cellular.com/otterbox-atrix-4g-defender-series-case-holster-black-refurbished.html
Edit: Yes, I bought one from these guys. It's legit.
Click to expand...
Click to collapse
I don't wanna buy a refurbished one. I want a cheap but new one which will give my phone minimal (better) protection
saiftheboss7 said:
I don't wanna buy a refurbished one.
Click to expand...
Click to collapse
Why not?
k4zyn said:
Why not?
Click to expand...
Click to collapse
I just don't feel comfortable buying a refurbished one
Mine's fine. I even broke the holster clip and Otterbox is sending me a new one. My point is that if there's something wrong with it their warranty will cover it. It's a good way to save money and maximize your phone's protection.
Besides otterbox isn't minimal in size! It needs some extra space around the phone which makes it bigger! I don't like it. I like a minimal one yet that would protect my phone. Just like roswellkidd says. TPU cases are good
Bestbuy.com is selling the Otterbox Impact case for $3.75 with free shipping.
I'm not trying to be an Otterbox spokesman, I'm just fishing you some good deals.
http://www.bestbuy.com/site/OtterBo...ategoryId=pcmcat171900050029&id=1218312986856
treehumper said:
Bestbuy.com is selling the Otterbox Impact case for $3.75 with free shipping.
I'm not trying to be an Otterbox spokesman, I'm just fishing you some good deals.
http://www.bestbuy.com/site/OtterBo...ategoryId=pcmcat171900050029&id=1218312986856
Click to expand...
Click to collapse
Thanks! Maybe I'd buy it now!
The Impact case isn't as strong as the Defender refurb I listed earlier, but this is a lot cheaper and will most definitely save your phone from drops.
Should I go with a TPU case or this case? This still looks bulky! Besides, I think this won't perfectly fit into my pocket!
It depends on what your real need is. The Otterbox cases are for people who expect to drop their phone more often than others. I drop my phone at least once a day on hard surfaces and/or from insane heights (I'm a CATV installer that's clumsy with his phone). For a general user, the TPU case would be fine if you're not expecting to drop it a whole lot. It's also more fashionable, it won't make your phone look like it just Hulked out.
Personally, I'd keep a cheap Otterbox around in any case, you might need it if you're going to do anything daring. At least it wouldn't be a bad idea to have an Otterbox on a phone that may fall out of your pocket on a rollercoaster at Six Flags (happened to me without an Otterbox... I had to bury the phone).
treehumper said:
For a general user, the TPU case would be fine if you're not expecting to drop it a whole lot. It's also more fashionable, it won't make your phone look like it just Hulked out.
Click to expand...
Click to collapse
I'm on this group. I take good care of my phone. Besides, I can live without case. Just need it to make it more durable. So I'd go with a TPU case. Thanks for helping me to take my decision. As I'm a teenager style does matter for me
saiftheboss7 said:
I'm on this group. I take good care of my phone. Besides, I can live without case. Just need it to make it more durable. So I'd go with a TPU case. Thanks for helping me to take my decision. As I'm a teenager style does matter for me
Click to expand...
Click to collapse
My wife's probably at least twice your age and we still have to stylize her phone so I have to look at aesthetics every time I order a case as well
for your price range, you should just grab the refurbished deals posted.
or save up money and get a real case.
wow sorry I didn't get back earlier, I am actually too new to post links, but if you type in "atrix TPU case" into amazon you will see the TPU cases, that gel case you posted looked like a silicone case not a TPU case. Mine was the "smoke grey cruzer argyle" TPU case that is currently $2.86 with free shipping, although all five or so of the top results look like they are essentially the same, just different colors.
I hope I didn't talk you out of an otterbox in my first post, I personally was not satisfied with mine, but as you can see here most people love them. I also have never dropped my phone, so my case is basically just to protect it from dings and scratches if I ever do drop it. I don't expect it to protect my phone in a ten foot drop, but considering the highest I would ever have the chance of dropping it from in my daily routine is just a few feet, Ill take the slimmer case even if it does have less protection.
I, like many others, put in a vote for a TPU case... I have used the Otterbox Impact case, the rugged battery cover, and the TPU case...and the TPU case is by far may favorite. It offers ok drop protection, but mainly I love it becuase it's easy to get out of my pockets while the Impact or any rubberized case sticks to pockets making it really hard to get out in the car or while sitting in general. I think the atrix is a little too small without a case and the TPU case makes it slightly larger but not too large...it's the way to go.
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
I used the Incipio Feather for a few months. I really liked the "low-profile" but it was very fragile. I ended up cracking two of them just from taking them off to do battery pulls. As far as grip goes, it was generally nice to hold but doesn't offer that much more grip then the phone by itself. I've also used the Ballistic SG and while it was too bulky for me it had excellent grip. I was able to put it on my lap, back facing down, while driving and it never moved.
Currently I use the Speck Candyshell and it holds up pretty well. Grip can become an issue if your palms get sweaty as the exterior is all hard plastic.
Maringer said:
Although not normally a fan of cases for phones, I've now dropped my Atrix a few times (due to the hopeless shiny back with a total lack of grip) so I've decided I need to get one! Luckily, the Atrix has only been dropped onto carpet so it remains undamaged.
I don't like the silicone cases and I'm not overly keen on the TPU ones either. The 'official' rubberised battery cases looked like the right sort of thing, but after checking the reviews, I'm not keen on the way the side bits on the front can come loose when coming in or out of the pocket.
As I'm looking for something slim/lightweight, I think this leaves me with either the Seidio Surface or the Incipio Feather.
My questions is this: Regardless of the amount these cases protect the phone in case of being dropped, are they actually likely to help me to avoid dropping them? Do these cases improve the 'grippability' of the Atrix?
Any helpful comments are appreciated!
Click to expand...
Click to collapse
I had the feather. After two drops on different corners, the case had cracks. I expected as much and the case did its job. I got the Incipio silicrylic case as a replacement, which has a silicon cover AND a hard cover. It's slightly bulkier than the feather, but it still looks good and is definitely more sturdy. Case is grippy but not overly grippy where you have a tough time putting the phone in your pocket. I can remove the case without fear of cracking it, unlike the feather.
I had one of the Incipio Feather's also. It lasted about 2 months before it completely fell apart. Is is a nice case and I really liked the feel and look of it and it will fit in the car dock with a little modification. But it is not rugged enough for me to recommend. I am using a TPC case now. Does the job. Easy to remove to put in my Car Dock, LapDock or Standard Dock. It feels much better than the Atrix does by itself. But it is kinda ugly. But I have dropped it a few times and it keeps my Atrix safe.
The Seidio Active was my choice and I like it a lot. Two pieces - rubber with hard shell skeleton protects it nicely.
I can remove it (to dock) in seconds and replace it quickly too. Got it at Amazon: http://www.amazon.com/gp/product/B004WKIEF2/ref=oh_o03_s00_i01_details
That's the sapphire blue one, but they have other colors.
I'm using the otterbox commuter case. I got it off of Amazon.com for only 20 bucks on Saturday. So far it's been amazing
Sent from my MB860 using XDA App
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Of all the experiences I have read about cases and their compatibility with docks, the only one that I have heard that works is the Incipio Feather (or somehting similar) when taking in the consideration of actually not removing the case.
troycarpenter said:
When talking about cases, would it be possible to mention (as some of the posts do) which docks these work with (I use all the docks...car, HD/standard docks, lapdock). Also a link to some site with the product or a good enough description that I can google it.
I hate to be a pain in asking for the extrra info, but I'm looking for a case now, too and don't want to have to remove it all the time (especially for the car dock).
Click to expand...
Click to collapse
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Yes, I have read that people just simply remove the insert that is in the docks and it fits just fine. I have seen pics before too but can't remember where I saw them. Maybe I can try to find them.
troycarpenter said:
Is this the one:
http://www.amazon.com/Incipio-Motorola-Atrix-feather-Ultralight/dp/B004QJPWK4/ref=pd_cp_cps_1
Click to expand...
Click to collapse
---------- Post added at 11:29 AM ---------- Previous post was at 11:16 AM ----------
Here is a thread about a mesh cover (which is essentially the Feather but with a mesh look) and the second link is a post of someone in that thread showing the Atrix in the car dock with the case on.
Thread:
http://forum.xda-developers.com/showthread.php?t=1194096
Post with pics:
http://forum.xda-developers.com/showpost.php?p=16704009&postcount=27
Here is another thread discussing (and maybe confirming) the Feather working with docks:
http://forum.xda-developers.com/showthread.php?t=982574
The Incipio feather will fit in the car dock with the cardock insert removed, but the latch wont close. It has a ridge that comes over the face of the phone, but sits on top of the feather case. It will work if you make sure you have it inserted firmly all of the way in. I take corners pretty fast and had it fall out a couple of times. I modified mine to make the latch close pretty easily. Put it in the cardock and marked the outline with a X-acto knife. Used diagonal cutters to cut the 2 short vertical cuts. Scored the Horizontal mark with the X-acto knife and snapped the piece off with some lineman pliers. Now that these are $10 apiece I am tempted to get another one (or 2). Just was not worth the 25 bucks I paid 6 months ago.
Thanks for the various comments about cases.
I've looked at the various recommended cases and think I'll probably have to give the Incipio Feather a miss if it is as fragile as others have mentioned. I'm based in the UK so I'd have to order the case from the US (can't locate a UK seller) and this would cost me the equivalent of around US $ 45.00 which is a bit too much for something which won't last long!
Various other hard cases aren't available in the UK either (or not at decent prices) and, for me, the most important thing is to have a case lacking in bulk.
The Otterbox Commuter is the only one I get can get reasonably cheaply from within the UK (about US $ 20) but I'm not taken by the look of this.
Therefore, I think I've settled on the Seidio Surface which looks to have good reviews and will hopefully be the sort of slimline case I can deal with. I can obtain this via Amazon UK from a US seller for a mere US 36.00!
Incidentally, in the monster "Ruggedized battery cover" thread, there was mention that the Seidio Surface fits the lapdock and can be easily removed for the car dock:
http://forum.xda-developers.com/showpost.php?p=16600986&postcount=379
I don't own either dock so this isn't really of relevance to me!
I started looking for a discrete case for the same reason (battery door is way too slippery.)
There were some Chinese-made rubberized battery door replacements that seemed popular a while back. Most of the mobile accessory sites that carried them sold out, though I found and ordered one on eBay. The seller seems to have more:
http://www.ebay.com/itm/Back-Cover-...ltDomain_0&hash=item415bd6c69c#ht_2880wt_1085
I just got my yesterday. Fitment is surprisingly accurate, no misaligned cutouts or anything, and the added bulk is acceptable. Feels much better in hand now, too, when typing in landscape mode. It takes a deliberate effort to free the phone from the case, as it has a couple of tabs that clip into the retaining slots used by the factory battery door. Haven't noticed it snagging or coming loose as it goes in and out of my pocket either.
edit:
I just noticed the "dock fitment" discussion going on in this thread. I can't say anything about this case + docks since I don't own any docks.
I fashioned a case out of 3M carbon vinyl wrap. Keeps that Carbon Fibre effect on the back case whilst making it much more grippy (never dropped it since) and much more aesthetically pleasing as it gives off a 3D carbon fibre effect.
I can post pics if you like
Also worth mentioning you can pick this stuff up dead cheap off eBay - http://www.ebay.co.uk/itm/30x20cm-G...arParts_SM&hash=item4cf189dd66#ht_1792wt_1163
This sheet will give you a few attempts at it. It took me 2 to get mine the way I liked it
If you are just looking for grip without affecting aesthetics the Zagg Total protection is a great option. Clear is nearly impossible to tell it is on there. It is the same material and install as the screen protector. So no residue when removed. Make sure you read/watch the install tips from Zagg. I have been using it since April without a drop.
I have; however, decided to get a case and am trying the Seidio Active. The wife got the Incipio Silicrylic. both indeed fit in the HD/Standard Dock with the insert removed, I'm curious about whether there is enough support from the back of the dock though. As mentioned, I'm guessing the car dock will not close due to the extra couple millimeters, but will try it out and reply if it does indeed work.
Well, the Seidio Surface winged its way across the Atlantic reasonably quickly and I received it earlier this week.
It is very slightly bulkier than I expected but it is still very slimline so this isn't a problem as it still fits in my pocket easily. A little more difficult to take the phone out of my pocket than previously but again, not really a problem.
The surface of case itself isn't as 'grippy' as I expected, either, but it is a great improvement to the usual slick battery cover and I haven't juggled with it yet this week! I can now operate the phone using one hand if necessary without fear that I will lose my grip and drop it.
There are a few small imperfections on the back of the case - it would seem as though there were a few specks of dust or some other substance on the case before it was covered with the rubberised coating as a few tiny bumps can be felt. Not enough of a problem for me to bother returning it all the way to the US, however!
It is slightly tricky to take the Seidio Surface off the phone - it seems to come off easily sometimes but remain stubbornly in place at others. I think I'll need to practice taking it on and off the phone a bit more until I get the knack.
Overall, I'm reasonably impressed with the case and would give it an 8/10. It would have received a higher score had it not been so ridiculously expensive for me to buy here in the UK - Amazon.com are selling it at approximately half the price I paid!