TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
known bugs:
- many to list (adb shell, MTP, USB storage...)
PhilZ Touch proper: http://forum.xda-developers.com/note-4/snapdragon-dev/trltexx-philz-touch-t2927930
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
Isn't the TWRP v2.8.1.1 out for the T-Mobile version?
I installed that version on my Galaxy Note 4 (SM-N910F), and it seems to be working good so far.
Tom-Helge said:
Isn't the TWRP v2.8.1.1 out for the T-Mobile version?
I installed that version on my Galaxy Note 4 (SM-N910F), and it seems to be working good so far.
Click to expand...
Click to collapse
The only issue will be to flash asserted files
else, it should be ok
I could also start compiling from sources when ever I have time
Are you planning on releasing your custom recovery for note 4 any time soon?
H0rn said:
Are you planning on releasing your custom recovery for note 4 any time soon?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=56388388&postcount=5700
when an official Cyanogenmod recovery is out, you would be able to build PhilZ Touch too
Meanwhile, I have no time to play with Samsung kernel sources and build a device tree from scratch
Phil3759 said:
http://forum.xda-developers.com/showpost.php?p=56388388&postcount=5700
when an official Cyanogenmod recovery is out, you would be able to build PhilZ Touch too
Meanwhile, I have no time to play with Samsung kernel sources and build a device tree from scratch
Click to expand...
Click to collapse
Man its good to see you here. I will sorely miss your recovery but am also so glad you've joined the international n4.
---------- Post added at 09:58 PM ---------- Previous post was at 09:40 PM ----------
Tried 3 different downloads but every time I flash this with Cwm it fails
Edit
Never mind just extracted it and saw it was a tar file lol
Hello Sir, can you please build custom recovery for N910G too ?
Whoop, been waiting for recovery, will install after the weekend.
Thankyou!
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
https://github.com/xiaolu/android_device_samsung_trlte (include kernel headers)
https://github.com/xiaolu/android_device_samsung_trhplte
Phil3759 said:
TWRP 2.8.1.0 for SM-N910F (Note 4 International)
This is based on official TWRP release for Canadian model
It is repacked with a modified property file to match stock recovery for international version
I tested on my brand new Note 4 and it works as expected, at least on a quick check
Click to expand...
Click to collapse
Cay you do this for SM-N910C? Plss.
Works perfect on my note 4 thank a lot.
Chenglu said:
https://github.com/xiaolu/android_device_samsung_trlte (include kernel headers)
https://github.com/xiaolu/android_device_samsung_trhplte
Click to expand...
Click to collapse
:good:
You force me to compile PhilZ Touch again
Will do later
Doesnt work for me. I have 910F but when i flash with odin and try to enter recovery i get into stock recovery :S
Hi, a custom recovery for N910G version please.
If I want to flash a zip sometimes get this error ( see screenshot ) . I play a Android Backup and flash the same zip it goes . What can i do?
Working great! THanks a lot!
Phil3759 said:
The only issue will be to flash asserted files
else, it should be ok
I could also start compiling from sources when ever I have time
Click to expand...
Click to collapse
Please give a little more explation what are "asserted files" ( word by word translation to german does not make sense)
The reason for that question is that I have flashed the Echoe rom (and the new kernel) for my 910F international N4 with the T-Mobile TWRP. Now I would like to understand whether this could cause any trouble when switching to your modified TWRP.
Many thanks & Best regards,
dingolino
Yup confirmed working. Just did nandroid backup and flashed couple zips. Thanks Phil!
Phil3759 said:
:good:
You force me to compile PhilZ Touch again
Will do later
Click to expand...
Click to collapse
:laugh:
Chenglu said:
:laugh:
Click to expand...
Click to collapse
Ooh its philz
---------- Post added at 09:59 PM ---------- Previous post was at 09:58 PM ----------
Now the question is will it work on tmobile n4
---------- Post added at 10:02 PM ---------- Previous post was at 09:59 PM ----------
Chenglu said:
:laugh:
Click to expand...
Click to collapse
Cant wait if i knew how to compile it i would
Related
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Note 10.1 2014 ** Stable **
- wifi: SM-P600 (lt03wifi)
- 3G: SM-P601 (lt03wifiue)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
Known issues
- minor: screen capture is not working.
- minor: poweroff from recovery when usb is connected reboots into recovery, however, offline charging from rom is fine
The Note 3 version seems good, so I do not expect many issues here
Please test:
- mount USB storage on PC
- USB OTG mount and format to exfat/ext4 for testing
- Backup to exfat sdcard or USB OTG
ThX for!
The Recovery doesnt work. (P605)
It depends @ Bootscreen with follow message:
"Recovery is not seandroid enforcing" + "Set Warranty bit : recovery
Greets
Chris
Chris X. said:
ThX for!
The Recovery doesnt work. (P605)
It depends @ Bootscreen with follow message:
"Recovery is not seandroid enforcing" + "Set Warranty bit : recovery
Greets
Chris
Click to expand...
Click to collapse
But except that message, does it work?
@Phil3759,
Glad to see you once more on the Note 2014 community, been using your recovery on the old note 10.1 2012 edition.
Any plans for the 601 variant .( Ready to test )
Phil3759 said:
But except that message, does it work?
Click to expand...
Click to collapse
Unfortunately, no!
It nothing happens.
Chris X. said:
Unfortunately, no!
It nothing happens.
Click to expand...
Click to collapse
I will try to change ramdis
Phil3759 said:
I will try to change ramdis
Click to expand...
Click to collapse
Take your time, Phil. :good:
Today I had hardbricked my tablet.
I had been trying to develop a new root variant for P605.
TWRP seems also slightly buggy. After a full wipe my tablet died.
Greets
Chris
Chris X. said:
Take your time, Phil. :good:
Today I had hardbricked my tablet.
I had been trying to develop a new root variant for P605.
TWRP seems also slightly buggy. After a full wipe my tablet died.
Greets
Chris
Click to expand...
Click to collapse
:good::good::good:
for the feedback
Good luck in RMA also
Can't wait for this to work properly either.. TWRP seems to stop me from flashing a pre-rooted ROM, kind of a must for a worthy ROM imho..
Hoping this will flash
Sent from my SM-P600 using Tapatalk 4
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Phil3759 said:
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Click to expand...
Click to collapse
This is recovery.img extracted with 7-zip from MJ9 Nordic firmware. Hope it helps you.
https://dl.dropboxusercontent.com/u/8026412/recovery.img
Phil3759 said:
If someone can upload a stock recovery.img from P605XXUBMJ9 firmware, it would make things easier
Click to expand...
Click to collapse
Here :
recovery.img.tar
@Phil do u have anything for me to test ?
---------- Post added at 07:57 AM ---------- Previous post was at 07:54 AM ----------
[/COLOR @Phil do u have anything for me to test ?
edit.. 605 model?
I'll be very patient with my 600 :silly:
Version 6.04.3 Alpha
http://d-h.st/users/philz_touch/?fld_id=29981#files
This is a repack around a pure stock ramdisk, like I used to do with Samsung devices.
They often work better this way to start with
It could have some selinux issues, but those we fix later, once we get it boot into gui
State was moved to Alpha to reflect it is early debugging and untested
Noobs should stay away for now
I love you man!!!!
Thanks for your great work, to my, one of the best recovery.
Psycho Pufo said:
I love you man!!!!
Thanks for your great work, to my, one of the best recovery.
Click to expand...
Click to collapse
Then flash it and report back
Link to new version fixed, sorry
Let mw know in details how it works. Remember, I do not own the device, I am relying on your description/logs to fix things
Any plans for P600?
Sent from my GT-I9300 using XDA Premium 4 mobile app
I've packed the zImage of latest CM12.1 build with fotatwrp 2.8.6.0
Idea is based on post #9 @ http://forum.xda-developers.com/z3-c...0-z3c-t3029989
Credits to #Funiewski
DL link for FotaZ3C-CM12.1v2.img
https://db.tt/l2DPLoXx
Flash tutorial:
Place the *.img file in the folder where adb/fastboot stuff is located
Code:
fastboot flash recovery FotaZ3C-CM12.1v2.img
fastboot reboot
Enter recovery @ boot (when purple led lights up) Vol +
shafiq01 said:
I've packed the zImage of latest CM12.1 build with fotatwrp 2.8.6.0
Idea is based on post #9 @ http://forum.xda-developers.com/z3-c...0-z3c-t3029989
DL link for FotaZ3C-CM12.1.img
https://db.tt/l2DPLoXx
Enter recovery by pushing vol+ when purple led lights up at boot
Click to expand...
Click to collapse
--->>> link doesnt work.
--->>> i thought this is for cm12.1 compatible, but when flashing new cm-updates its not working and can't update nightly build, any advise.
Works great, many thanks, @shafiq01!
edcarsky said:
--->>> link doesnt work.
--->>> i thought this is for cm12.1 compatible, but when flashing new cm-updates its not working and can't update nightly build, any advise.
Click to expand...
Click to collapse
Sorry, first version was incomplete, so i had to replace it, but forgot to edit the flash code tuto in OP, but It's sorted now. And Zwulf confirmed it to work also.
Sent from my Xperia Z3C using XDA Free mobile app
Btw. flashed it with Rashr app from Play Store instead of flashing with fastboot from USB, maybe because of this first version worked for me. Dunno...
Zwulf said:
Btw. flashed it with Rashr app from Play Store instead of flashing with fastboot from USB, maybe because of this first version worked for me. Dunno...
Click to expand...
Click to collapse
There was a lot of bugs with first one, graphic was bad, and you couldn't update cm updates etc, the second one, which is the current is working properly, and graphics are good to
Sent from my Xperia Z3C using XDA Free mobile app
I can update every nigthly whiout lose twrp?
---------- Post added at 03:36 AM ---------- Previous post was at 03:32 AM ----------
Ehhh @shafiq01 ?
tatanico said:
I can update every nigthly whiout lose twrp?
---------- Post added at 03:36 AM ---------- Previous post was at 03:32 AM ----------
Ehhh @shafiq01 ?
Click to expand...
Click to collapse
Yes, you should be able too.
Sent from my D5803 using XDA Free mobile app
So just so clarify, this is not built from source? Your first link doesn't work.
disregard the following second question I just realized what you had written
Also if I may ask, why nightly builds? TWRP updates once in a while (which can sometimes be over a month), what are you doing to have it updated every night?
On that note, now that I understand what you're doing here; does TWRP not work with 12.1? Although I haven't given 12.1 much testing time, TWRP did work for me (the same one as I used in CM12).
someone755 said:
So just so clarify, this is not built from source? Your first link doesn't work.
disregard the following second question I just realized what you had written
Also if I may ask, why nightly builds? TWRP updates once in a while (which can sometimes be over a month), what are you doing to have it updated every night?
On that note, now that I understand what you're doing here; does TWRP not work with 12.1? Although I haven't given 12.1 much testing time, TWRP did work for me (the same one as I used in CM12).
Click to expand...
Click to collapse
I haven't done anything from scratch. It works for cm 12.1 on Z3C, since there wasn't any custom recovery for Z3C on CM12.1 and the current CM12 twrp didn't worked, so I decided to do something. It was just for fun, so I don't plan to update when it's working. Try if you like after you have tested CM12.1, right now I'm back on stock due to several reasons. Waiting in eager to have MultiROM feature. So I can boot between both roms
Sent from my D5803 using XDA Free mobile app
it's working! cool! one thing though..i find the screen brtightness unadjustable.i mean,it stays so bright & can't dim it.. 'nways,it's still working,& thank you! cheers!
Since @EsromG5 and @SoUnd001 started to work on nougat booting in both firmware...
I just did ganesh varma's multirom works in mm bootloader using @vaserbanix 's tutorial https://forum.xda-developers.com/galaxy-j5/how-to/tutorial-to-replaceing-original-kernel-t3543167
Edit: using aroma LP/MM by Zonik, now it work in both firmware too.
ganesh varma's thread/tutorial https://forum.xda-developers.com/galaxy-j5/development/mod-multirom-samsung-galaxy-j5-t3521449
THIS MOD IS NOT TO ROMS THAT NEED LL BOOTLOADER INSTALL IN MM BOOTLOADER (vice-versa)
Example of combinations in mm bootloader: any rom that need mm bootloader(stock rom, aroma roms, other custom roms) as primary rom (normal installation) WITH mm bootloader custom roms, nougat roms(soon) as secondary.
-In case of aroma roms as primary, u must use AROMA twrp to install the aroma rom then install multirom twrp and multirom.zip to install secondary roms.
-To install two or more aroma roms u have to:
1-install the rom u want using aroma twrp
2-install the multirom twrp and multirom.zip and move the primary rom to secondary
3-install aroma twrp, wipe everything except external card and internal storage
4-install multirom twrp and zip again
DOWNLOADSJ500 M-F-FN-Gworks fine in M, FN model, but i need testers to other modelsMultirom.zip
Credits:
@nkk71 for his kexec workaround
@Tasssadar For MultiromSource Code
@Nick Verse
@ganesh varma
@By Zonik
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2017-05-25
Created: 2017-05-25
J500F/H/FN ??
sivakrishnanj said:
J500F/H/FN ??
Click to expand...
Click to collapse
can you test pls?
Download wont work
infixremix said:
Download wont work
Click to expand...
Click to collapse
Yeah, need to share it as zip with public link
American_Jesus said:
Yeah, need to share it as zip with public link
Click to expand...
Click to collapse
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
infixremix said:
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
Click to expand...
Click to collapse
added. u can't install nougat o mm bootloader for now. the rom must be modified to u install nougat rom in mm bootloader
What ur model?
luisfelipee said:
added. u can't install nougat o mm bootloader for now. the rom must be modified to u install nougat rom in mm bootloader
What ur model?
Click to expand...
Click to collapse
Fn
infixremix said:
Nope the download works can confirm click on open in window download works , works on mm too but the zip file for multirom isn't there but I'm going to use the twrp for flashing nogut on mmm
Click to expand...
Click to collapse
I mean, the link to TWRP goes to recovery.img and recovery.tar.md5, there's no need to download both files, only needs to share recovery.tar.md5.
Both files will only confuse users, share only recovery.tar.md5 with public link.
American_Jesus said:
I mean, the link to TWRP goes to recovery.img and recovery.tar.md5, there's no need to download both files, only needs to share recovery.tar.md5.
Both files will only confuse users, share only recovery.tar.md5 with public link.
Click to expand...
Click to collapse
If they get confused, they need to know the difference
how to delete this mod? HELP!
is it difficult to write a few words? Because of this program, the phone now works badly. you want to spoil our phones?
Vicka79 said:
is it difficult to write a few words? Because of this program, the phone now works badly. you want to spoil our phones?
Click to expand...
Click to collapse
Flash a new recovery.IMG like any twrp and just in case reflash your bootloader.img.tar in odin
thanks
---------- Post added at 06:55 PM ---------- Previous post was at 06:48 PM ----------
how to reinstall bootloader? please link bootloader for fn model. android MM.
Vicka79 said:
thanks
---------- Post added at 06:55 PM ---------- Previous post was at 06:48 PM ----------
how to reinstall bootloader? please link bootloader for fn model. android MM.
Click to expand...
Click to collapse
this is the thread for the bootloader just look for 6.0.1 that's mm and read the instructions there https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
garylawwd said:
this is the thread for the bootloader just look for 6.0.1 that's mm and read the instructions there https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Click to expand...
Click to collapse
thanks
Will it work on my J500N0? TWRP Installed and still lollipop(There was no updates from samsung).
luisfelipee said:
can you test pls?
Click to expand...
Click to collapse
I can test the H variant if needed.
Zakaryan2004 said:
I can test the H variant if needed.
Click to expand...
Click to collapse
not working
TWRP RECOVERY
GALAXY GRAND 2
Team Win Recovery Project 3.1.0.x
Official TWRP App
The official TWRP app is the first and only first-party app developed by Team Win for TWRP. Please bear with us as we work to fix any bugs and build out the features. The initial version of the app does not support flashing on the Pixel due to the Pixel's A/B partition layout. In addition, the app may not support finding and flashing images from external storage locations. We are working hard to improve these items and bring you more new features.
Download Links:
We recommend downloading the app from the Play Store.
If you do not have Play Store access, you may download the Official TWRP App here: https://dl.twrp.me/twrpapp/
How do I use the app?
When you first open the app, you will be greeted by a few options. First, you will need to agree not to hold us responsible for anything that happens to your device while using the app. You may also grant the app root permissions. The app will work without root, but some functionality like image flashing will be disabled. Lastly, you can opt into enabling InsightCore (more on this feature later).
Once you have passed this initial screen, you will be greeted with the app home screen where you can choose TWRP FLASH or NETWORK STATISTICS (more on the network statistics later). On the TWRP FLASH screen you will need to select a device. Once you have selected a device, the app will periodically check for new TWRP versions for the device that you have selected. The default interval is once per day, but you can tap on the settings icon in the upper-right to change the interval or disable the update check entirely.
If you enabled root access, you will see options for selecting an image and buttons for flashing the selected image to boot or recovery. Note that you should flash TWRP images to recovery. The boot image flashing is for flashing full boot images (not just kernel zImages) and should not be used for flashing TWRP.
ScreenShoot:
Bugs:
None
Stable
DOWNLOAD Link:
https://mega.nz/#!tUgxRI5b!XaTp_Ddurz4HlsuzmLme60IkUq9GwQMDpInii92dayU
Pls Don't Forget Thanks Button
Good work bro. ☺
hackako11 said:
Good work bro.
Click to expand...
Click to collapse
does it work for G7102 ??
Koko2017 said:
does it work for G7102 ??
Click to expand...
Click to collapse
no but ı can ported for SM-G7102
Ooops i almost flashed this. Didnt read that its for 7105 only. Can you port it to 7102? It would be great too. ?
hackako11 said:
Ooops i almost flashed this. Didnt read that its for 7105 only. Can you port it to 7102? It would be great too.
Click to expand...
Click to collapse
oke bro
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
Koko2017 said:
does it work for G7102 ??
Click to expand...
Click to collapse
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
ccortina said:
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...recovery-twrp-2-8-7-0-touch-recovery-t3207764
Working bro ı make new TWRP for both grand 2
Hi please will this twrp work on grand 2 with model SM-G7108V. If no and any help to get twrp working on it will be much appreciated thanks
working link ?
ccortina said:
Does It work for 7105L? By the way Where can I find the ODIN Version Because I don't have any Recovery
---------- Post added at 09:58 PM ---------- Previous post was at 09:25 PM ----------
You can find it here...
https://forum.xda-developers.com/showthread.php?t=3577631
Click to expand...
Click to collapse
***
maybe you have a working link ?
that would be gret +++
hola que tal como debo instalarlo.....agradecería tu respuesta
Is there a newer version?
How to instal twrp without root and with original recovery?
Hi this work for the 7105H?
Hello guys also have a G7108V is there any custom rom I can use on the phone and a custom recovery as well
Any help is appreciated
Your standard assortment of kernel tweaks and mods found on XDA, as well as upstreamed to Linux 4.4.142. This is my personal kernel so I haven't compiled a feature list or anything. I'll try to do that sometime in the future, but for now you can just look at my github.
This is for BKL-L04 ONLY and I'm only including the kernel.img. If you know how to flash that then you should also know not to attempt to flash this on BKL-L09.
Thanks:
google
xda
kernel.org
eng.stk
boeffla
others
[size=+4]Download[/size]
Remember to download the correct kernel for your software version.
BeastMode Kernel vR43 for Honor View 10 (BKL-L04) software .111
BeastMode Kernel vR43 for Honor View 10 (BKL-L04) software .110
XDA:DevDB Information
BeastMode Kernel for the Honor View 10 (BKL-L04), Kernel for the Honor View 10
Contributors
freeza, freeza
Source Code: https://github.com/freeza-inc/beastmode-honor-view-10
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: vR43
Stable Release Date: 2018-07-23
Created 2018-07-20
Last Updated 2018-07-23
Changelog and features
Features:
Boeffla wakelock control
Up to date with July Android Security Bulletin
Legacy wakelock control for various wakelocks
More...
Changelog:
7/23/18-vR43: Update to Linux 4.4.143
7/20/18-vR42: Initial release
Screenshots and other random information
Let's drop a screenshot or two here. I'll change this later.
Nice work buddy, ill give a try, but where is the download link ?
AL_IRAQI said:
Nice work buddy, ill give a try, but where is the download link ?
Click to expand...
Click to collapse
XDA has been acting funky all day so I haven't been able to upload without errors. I'll post it shortly though.
freeza said:
XDA has been acting funky all day so I haven't been able to upload without errors. I'll post it shortly though.
Click to expand...
Click to collapse
Hey, upload it to Drive or AFH for now XD
Updated with links
how do i root the honor view 10 lo4? i havent seen any rooting method for it?
leo5111 said:
how do i root the honor view 10 lo4? i havent seen any rooting method for it?
Click to expand...
Click to collapse
Just flash Magisk-16.7 from TWRP
AL_IRAQI said:
Just flash Magisk-16.7 from TWRP
Click to expand...
Click to collapse
but doesnt twrp need root? im confused because the note 6 i had was differnt so any help appreciated thanks
---------- Post added at 05:35 AM ---------- Previous post was at 05:08 AM ----------
i used the all in one tool it reboots into recovery but then exits out to fastboot after like 15 seconds
leo5111 said:
but doesnt twrp need root? im confused because the note 6 i had was differnt so any help appreciated thanks
---------- Post added at 05:35 AM ---------- Previous post was at 05:08 AM ----------
i used the all in one tool it reboots into recovery but then exits out to fastboot after like 15 seconds
Click to expand...
Click to collapse
Your bootloader is unlucked?
If yes flash twrp.
Flash magisk.
Powered by View 10
2WildFirE said:
Your bootloader is unlucked?
If yes flash twrp.
Flash magisk.
Powered by View 10
Click to expand...
Click to collapse
bootloader is unlocked i know this because it gives me some warning about my phone not being safe
and i just ran the check says unlocked...fastboot flash twrp?
Yep
Download twrp for Berkeley, then
FASTBOOT flash twrp. Fastboot reboot, pull USB and hold volume up button to boot into twrp.
Powered by View 10
been so long since i used fastboot how do i get fastboot open and running?
---------- Post added at 06:12 AM ---------- Previous post was at 05:52 AM ----------
i downloaded 3.2.10 and when i flash it it says partition length get error?
---------- Post added at 06:19 AM ---------- Previous post was at 06:12 AM ----------
ok it said flashed but gave some error about software fail what version do i use?
---------- Post added at 06:36 AM ---------- Previous post was at 06:19 AM ----------
FASTBOOT flash twrp is that what i put in fastboot? i put fastboot flash ramdisk_twrp.img i think it was
Correct flash is fastboot flash recovery_ramdisk (path to twrp) you can read all this on twrp side for Berkeley.
Powered by View 10
thats what i used and it said it installed but when i held volume up when it booted said something about software failure and then booted up to OS
Guys this is not the place to talk about root/twrp, move on to another thread!!
@freeza
What's up? Wow cool seeing you here. I always used beast mode on old note 4.
I have the honor 7x(mate se) I'll have to see if this is compatible and will try.
Edit. I see this is newer chipset. So it probably won't.
But nice seeing you here working on Kirin devices. These devices need kernel devs. ?
Hi I try to flash in fastboot mode, but I got bootloop. System can't boot up. Flash back original kernel and is working. What can I do again to get it to work on my bkl_l04
DriveDroid
Hi all
how to add to the kernel BKL-L09 (Honor View10, kernel 4.4.23+ )
USB flash, CDROM emulation on mass_storage (compatible with DriveDroid)
Maybe someone has already done it.
Thank