Related
I'm a complete noob, and I probably should have done more research before doing this - Sorry for annoying post if this has occurred already, I couldn't find a post with a solution.
What I did:
Installed adb tools, unlocked bootloader, then rooted it. Then I tried installing cm10.1 following this guy's method(I don't have s-off) :
wwjoshdew - How To Install CyanogenMod 10.1 Android 4.2.1 Jelly Bean on the HTC Evo 4g LTE (Sorry, since I'm a noob, i can't post external links)
Everything seemed as if it was going according to plan but when I got to lock screen on first boot, I couldn't touch anything on the screen. Only volume control and power buttons on the outside functioned.
Also, I'm on twrp v2.4.1.0 and I flashed the rom using a app called flash gui on the phone. I made a backup as well, but after restore to backup, the phone just keeps restarting incessantly.
Can anyone help me, explaining in depth what I can do? I'm a complete noob, and I'm sorry if this post is annoying! I've seen that noob video.
Flash gui is only for flashing the kernel, the rom still needs to be flashed separately. If you're running the latest firmware update then you can't use roms that require older binaries (basically all aosp). Either wait for the source to drop, flash an updated sense rom, or go to the mean bean thread and look for the instructions for downgrading the touch panel update.
om4 said:
Flash gui is only for flashing the kernel, the rom still needs to be flashed separately. If you're running the latest firmware update then you can't use roms that require older binaries (basically all aosp). Either wait for the source to drop, flash an updated sense rom, or go to the mean bean thread and look for the instructions for downgrading the touch panel update.
Click to expand...
Click to collapse
Do you know how I can just revert back to regular android. I mean I can not do anything except boot into bootloader and recovery, I can't reset or restore. cheers and thanks
No first hand experience and I haven't looked into the issue too much. Better to check the mean bean thread in android development forum
Download and flash a 3.16 based sense rom and you should be fine. I ran into the same problem since i downloaded the lastest twrp. Also don't forget to wipe before installing.
mito8485 said:
Download and flash a 3.16 based sense rom and you should be fine. I ran into the same problem since i downloaded the lastest twrp.
Click to expand...
Click to collapse
How do I flash, like through fastboot devices then fastboot flash boot... in cmd on my pc?
Also, how do i know if the rom is 3.16 based?
Cheers and thanks mate.
SvetKrasivaya said:
How do I flash, like through fastboot devices then fastboot flash boot... in cmd on my pc?
Also, how do i know if the rom is 3.16 based?
Cheers and thanks mate.
Click to expand...
Click to collapse
You can download the lastest meanbean v3.06 rom, or any rom that is 3.16 software based. Usually it says it right by the name of the rom on the header. Place the rom zip on your sd card. I usually put all my files in the downloads folder. Then boot into recovery and do a factory reset, then wipe cache, wipe dalvik cache, and wipe system. Then go to install and flash the meanbean rom you have in your downloads folder. Then reboot. You should be good to go. Since your S-on try staying with roms that contain the s-on installer. Most 3.16 based roms have the S-ON installer but in the event that one does not you will have to flashboot the boot.img of the rom prior to flashing the rom through recovery. Note: You can only run roms that are based on the latest 3.16 software.
mito8485 said:
You can download the lastest meanbean v3.06 rom, or any rom that is 3.16 software based. Usually it says it right by the name of the rom on the header. Place the rom zip on your sd card. I usually put all my files in the downloads folder. Then boot into recovery and do a factory reset, then wipe cache, wipe dalvik cache, and wipe system. Then go to install and flash the meanbean rom you have in your downloads folder. Then reboot. You should be good to go. Since your S-on try staying with roms that contain the s-on installer. Most 3.16 based roms have the S-ON installer but in the event that one does not you will have to flashboot the boot.img of the rom prior to flashing the rom through recovery. Note: You can only run roms that are based on the latest 3.16 software.
Click to expand...
Click to collapse
How can I put the rom on the sdcard if I can't excess anything on the phone except for the bootloader...? I can't even access the recovery, because it has become relocked. pretty much all i can access is the bootloader and fastboot, nothing eles, I can't even restore to normal htc sense firmware.
Cheers and thanks
SvetKrasivaya said:
How can I put the rom on the sdcard if I can't excess anything on the phone except for the bootloader...? I can't even access the recovery, because it has become relocked. pretty much all i can access is the bootloader and fastboot, nothing eles, I can't even restore to normal htc sense firmware.
Cheers and thanks
Click to expand...
Click to collapse
Take the card out and put it in your computer, dl it to the card and then put back on your phone.
tonyevo52 said:
Take the card out and put it in your computer, dl it to the card and then put back on your phone.
Click to expand...
Click to collapse
Thanks mate, I'll give that a try. I didn't think about taking the sd out jaja Do what exactly should i do once i put the rom on the sd?
Check out this thread. I believe you can flash the rom through fastboot. I have not done this though. So proceed with caution. Remember it has to be 3.16 based.
http://forum.xda-developers.com/wiki/index.php?title=Flashing_Guide_-_Android
ROM Flashing
Obtain a ROM of your choice, and note the location on your computer.
reboot your device into fastboot mode via one of the following options.
adb reboot bootloader (requires USB debugging to be turned on).
power off the device then back on with 'vol up' + power button.
Wipe your device.
fastboot -w
Update your ROM.
fastboot update </path/to/your/RomFile.zip>
Your phone will update and automatically reboot into the new ROM.
SvetKrasivaya said:
Thanks mate, I'll give that a try. I didn't think about taking the sd out jaja Do what exactly should i do once i put the rom on the sd?
Click to expand...
Click to collapse
Follow the steps that Milo put above and hopefully it works. Whenever I screwed mine up and wouldn't recover, I would run the 3.15ruu to put it back to stock.. However if you are on 3.16 I don't believe there is an ruu for it yet, I know captain throwback had something in works though, search for him and check his threads as a last ditch effort.. Best of luck.
Mito that is...
tonyevo52 said:
Take the card out and put it in your computer, dl it to the card and then put back on your phone.
Click to expand...
Click to collapse
Nevermind, got it all fixed, thanks so mate! You are my hero!:laugh:
SvetKrasivaya said:
Nevermind, got it all fixed, thanks so mate! You are my hero!:laugh:
Click to expand...
Click to collapse
Awesome... Now did you get it back to stock or did the cm10.1 work for you finally, curious what you did. Still learning stuff myself.
tonyevo52 said:
Awesome... Now did you get it back to stock or did the cm10.1 work for you finally, curious what you did. Still learning stuff myself.
Click to expand...
Click to collapse
I'm actually on meanbean latest version.
I couldn't do anything else except this
What I did:
- Put the micro sd card in pc
- copied meanbean rom to sd
- put sd card back in phone
- put phone into fastboot
-on pc, I extracted the boot.img from meanbean rom and placed it into android-sdk folder,
- simultaneously pressed shift and right clicked in folder to open command prompt
- in command prompt, type fast boot devices
- then fastboot flash boot boot.img
- on phone, put phone into recovery(twrp) then I installed the rom.
then the phone booted as normal. I'm working to see if I can install the cm10.1 on meanbean, I'm gonna test it to see what happens. I hoped I was able to help.
SvetKrasivaya said:
I'm actually on meanbean latest version.
That's cool, so you flashed the boot.img first after you extracted it and then you went right into Twr precovery and just flashed the rom zip file. And I agree, I don't know if the cm10.1 is for 3.16 or not, and if you flash a kernel and is not right, you're toast, that's why I'm hesitant to flash the cm10.1 zip....
Click to expand...
Click to collapse
tonyevo52 said:
SvetKrasivaya said:
I'm actually on meanbean latest version.
That's cool, so you flashed the boot.img first after you extracted it and then you went right into Twr precovery and just flashed the rom zip file. And I agree, I don't know if the cm10.1 is for 3.16 or not, and if you flash a kernel and is not right, you're toast, that's why I'm hesitant to flash the cm10.1 zip....
Click to expand...
Click to collapse
Yes, thats exactly what I did. Once I flashed the boot.img, I booted into recovery and installed the meanrom.
Yeah I feel you mate. I'm going to give it try again, see what happens and i'll let you know how it goes.
Hey, I tried it, and its still doing the same thing...touch screen is not working.
Click to expand...
Click to collapse
CM will not work with the latest touch panel update. See Captain Throwback's thread in Android Development to downgrade your touch panel software to run non-3.16 roms.
garfilo said:
CM will not work with the latest touch panel update. See Captain Throwback's thread in Android Development to downgrade your touch panel software to run non-3.16 roms.
Click to expand...
Click to collapse
Thanks for the answer, but where specifically is that thread mate?
Cheers and thanks.:good:
It's in the Android Development section. Here is a link and the title header
http://forum.xda-developers.com/showthread.php?t=1704612
[FIRMWARE][S-OFF] Jewel Firmware Collection - Latest: 3.16.651.3 OTA
Read the first post carefully. You already did all the hard stuff. Just downgrade the touch panel firmware to the previous version.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
Hey all, I'm trying to install Sense 6 Toolbox on my phone. I have everything up to date software wise. When I install the framework, I install/update, then reboot. When it comes back on, it still shows that it isn't active. What can I do to fix it?
Wmckinnon46 said:
Hey all, I'm trying to install Sense 6 Toolbox on my phone. I have everything up to date software wise. When I install the framework, I install/update, then reboot. When it comes back on, it still shows that it isn't active. What can I do to fix it?
Click to expand...
Click to collapse
got S-OFF?
If your device still S-ON, you need to change install method to flash via recovery.
mafyas said:
got S-OFF?
If your device still S-ON, you need to change install method to flash via recovery.
Click to expand...
Click to collapse
Ok,cool. I am currently S-On, Where can I find the flashable zip to flash in recovery? Thank you for the help.
Wmckinnon46 said:
Ok,cool. I am currently S-On, Where can I find the flashable zip to flash in recovery? Thank you for the help.
Click to expand...
Click to collapse
I mean you need change the install xposed install method.
First, open Xposed Installer, goto Framework > Installation Mode > Choose Recovery(Flash zip automatically).
Go back menu proceed to install and reboot. Let see the result.
mafyas said:
I mean you need change the install xposed install method.
First, open Xposed Installer, goto Framework > Installation Mode > Choose Recovery(Flash zip automatically).
Go back menu proceed to install and reboot. Let see the result.
Click to expand...
Click to collapse
Oh,ok,gotcha. Thanks again for ur help,I appreciate it.
Lol. I read my own reply, I drunk maybe. Double repeated words. nahh, nevermind as long as you get what I mean. BTW, enjoy your max! @Wmckinnon46
S-off is not so necessary here,the most important thing is to root your system and install expose framework then activate sense 6.0 toolbox.After reboot your phone you will get the functioned exposed framework.
I got everything working perfectly, thanks for the help guys. Now I just need to flash an unsecure kernel so I can get S-Off. Last time I tried, I got stuck on the white logo screen for about an hour until I finally was able to figure out how to get back to recovery, then flashed my backup.
Sent from my HTC0P3P7 using XDA Free mobile app
So i have an HOX+ asia (rooted) today received a 2.18.707.6 Software update this will be smooth install for some users however not for my case because i have TWRP installed so every time i click install well it goes to the TWRP boot menu.
So how do i update this? do i have to restore to stock?
ok nvm got it working used the TWRP install, you can find the update on Downloads, it will also fix root access
rovielran said:
ok nvm got it working used the TWRP install, you can find the update on Downloads, it will also fix root access
Click to expand...
Click to collapse
Mind sharing exactly how you got to update without returning to stock? any links you can share?
ryaneu said:
Mind sharing exactly how you got to update without returning to stock? any links you can share?
Click to expand...
Click to collapse
Ok this is how i got it working in my case:
1. Download the OTA update, in Settings > About > Software Updates
2. Click install
3. In my case im using TWRP so when i clicked install it boots me the TWRP menu
4. Click Install
5. Locate the downloaded OTA update in Downloads folder
6. Install
7. Fix root permissions (TWRP will ask you regarding this)
8. Done!
I noticed an annoying notification after update or i just noticed it lately. whenever it connects to wifi, mobile data, etc its shows "mobile data connected", "wifi connected" is there a way to disable this?
rovielran said:
I noticed an annoying notification after update or i just noticed it lately. whenever it connects to wifi, mobile data, etc its shows "mobile data connected", "wifi connected" is there a way to disable this?
Click to expand...
Click to collapse
my software number is 2.18.707.5 and there is no update till now...any info. why
I made a new topic for the same i couldnt find the thread for the update should delete that now..
So i am on a unlocked rooted phone running the stock htc one x+ with xposed modules ... I can simply install this.. wont mess up anything being rooted and all?
rovielran said:
Ok this is how i got it working in my case:
1. Download the OTA update, in Settings > About > Software Updates
2. Click install
3. In my case im using TWRP so when i clicked install it boots me the TWRP menu
4. Click Install
5. Locate the downloaded OTA update in Downloads folder
6. Install
7. Fix root permissions (TWRP will ask you regarding this)
8. Done!
Click to expand...
Click to collapse
can't flashing my update zip because my custom kernel (SpeedyKernel) can't be removed. can anybody share stock kernel for international OneX+ Asia WWE?
xyzisahero said:
I made a new topic for the same i couldnt find the thread for the update should delete that now..
So i am on a unlocked rooted phone running the stock htc one x+ with xposed modules ... I can simply install this.. wont mess up anything being rooted and all?
Click to expand...
Click to collapse
unfortunately i cant confirm with if it will work on xposed framework, however my rooted phone worked just fine with the help of twrp installation as it prompted me to re fix the permission before booting the update
xidia said:
can't flashing my update zip because my custom kernel (SpeedyKernel) can't be removed. can anybody share stock kernel for international OneX+ Asia WWE?
Click to expand...
Click to collapse
saw the stock rom at the "One X+ Original Android Development" section of the forum
2.18.707.6 Update
help me where i can down this ] 2.18.707.6 rom
htc one x+
So I tried my hand at installing SkyDragon ROM with S-On, but I ran into a issue. I got TWRP installed but when I installed the SkyDragon ROM with it, it says it installs correctly. But when I goto boot, black screen with sound. How do I fix it? My phone is unusable now and would love to get this thing fixed ASAP! Thanks!
I have access to fastboot and TWRP, I think I still have S-On, havent used a tool to S-Off so I should still be S-On.
What does your boot loader say ?
Do you have a backup of previous ROM .
If not do a full wipe as well as wipe system and try to install the ROM again.
But it could also be a bad download.
download it again and transfer it to an external sdcard and pop it in your phone so you can give it another go.
AT&T HTC ONE M8
jball said:
Do you have a backup of previous ROM .
If not do a full wipe as well as wipe system and try to install the ROM again.
But it could also be a bad download.
download it again and transfer it to an external sdcard and pop it in your phone so you can give it another go.
AT&T HTC ONE M8
Click to expand...
Click to collapse
I dont have a backup, this is the first time I ever did something wrong. Guess I wont make that mistake again.
Version is 19.0 WWE for HTC ONE (M8)
I used TWRP to wipe delvik, cache, system, data. The aroma installer asked if I wanted to do a full wipe, which I did. I installed it to the external sdcard.
jxcorex28 said:
What does your boot loader say ?
Click to expand...
Click to collapse
When installing the rom? Says everything is successful...
So I did the V 20 now to see if that worked. Nope. here is a log of the installation if that helps: http://pastebin.com/YnXfXTUW
In the aroma is there kernels to choose from and if so did you choose any overclocking options of any kind.have you asked in the ROM thread to see if anyone else is having this issue
Extract the kernel from zip and manually flash it after installing the rom. fastboot flash nameofkernel.img
jball said:
In the aroma is there kernels to choose from and if so did you choose any overclocking options of any kind.have you asked in the ROM thread to see if anyone else is having this issue
Click to expand...
Click to collapse
Yeah, SkyDragon kernal 3.0.0.0 or unsecured kernal. And yes I have, I pointed to this thread.
Now I am stuck at the HTC Screen with the text "This build is for development purposes only Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action."
Appropriate firmware flashed?
LightningKitsune said:
Now I am stuck at the HTC Screen with the text "This build is for development purposes only Do not distribute outside of HTC without HTC's written permission. Failure to comply may lead to legal action."
Click to expand...
Click to collapse
@LightningKitsune
Try the stock settings/default settings across the board .going for mad performance might be the issue on boot.I've been running Skydragon ROM for months and have zero issues on my at&t m8
Wonders_Never_Cease said:
Appropriate firmware flashed?
Click to expand...
Click to collapse
Is there a version of SkyDragon for 4.4.2?
jball said:
@LightningKitsune
Try the stock settings/default settings across the board .going for mad performance might be the issue on boot.I've been running Skydragon ROM for months and have zero issues on my at&t m8
Click to expand...
Click to collapse
Ive done that, nothing.
Personally I wouldnt flash the euro firmware on the att devuce too many issues are being reported as of late. use the 3.28.1540.5 firmware
LightningKitsune said:
Is there a version of SkyDragon for 4.4.2?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
Personally I wouldnt flash the euro firmware on the att devuce too many issues are being reported as of late. use the 3.28.1540.5 firmware
Click to expand...
Click to collapse
I never recall flashing a ROM to be this hard. What changed from 2-3 years ago when you could just add a recovery and install a zip to your external SD card and that was enough to install the ROM (after wiping the data and cache partitions of course).
Wonders_Never_Cease's thread, will help you, then you can flash whatever rom you wish for this phone, http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365 I used it, when I had a similar problem. I've only had my phone for several days.
I'm sure not one of us has had only one device or even at one time for that matter.so with each device comes different challenges so we need to read and research as much as we can before the most commonly known word(BRICK) becomes a reality.
mimart7 said:
Wonders_Never_Cease's thread, will help you, then you can flash whatever rom you wish for this phone, http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365 I used it, when I had a similar problem. I've only had my phone for several days.
Click to expand...
Click to collapse
My device isnt S-Off. I heard that you have to pay $25 to do that.
LightningKitsune said:
My device isnt S-Off. I heard that you have to pay $25 to do that.
Click to expand...
Click to collapse
Man I didn't want to pay for S-off but I did and it well worth it .I'm sure you know S-off will help you in the long run.maybe you need to stay S-on to be safe