Related
I am a noob looking to try out the touchwiz rom,
My 10.1 is encrypted and trying to remove the encryption using the menu option in settings- factory data reset - it just reboots like nothing happened and asks for the password (I wanted to turn off/get rid of the encryption). I get a box open and android icon for a brief moment at reboot.
Using ClockworkMod Recovery v4.0.0.4 the wipe/factory reset option selected and it errors on the mounting /data. Can't mount or format /data too.
This 10.1 retail has a locked bootloader and is rooted.
Anybody? So far not bricked, ,
got it
I used odin and followed instructions here- http://forum.xda-developers.com/showthread.php?t=1119492
I lost clockworkmod and it did not recognize my password on reboot, but it did let me wipe everything.
You might have to wipe user data to get rid of the encryption. But you will loose all ur data
<bump>
I'm having the same trouble - and no amount of flashing various stock or CWM recovery gets me to a point where I can actually format / remove the encrypted partition.
The device had been rooted - and then encrypted - and it wasn't until I attempted to reboot into recovery with CWM (hoping to perform a factory reset) that I got into a boot loop.
Days, and countless flashing later - I'm no closer. The one thing I find interesting: when I flash particular (CWM) recovery / images, and reboot - I actually get the 'pre-boot authentication' page, which still accepts my encryption passphrase. It's after this point - that I'm just staring at a black screen.
Perhaps nvflash might be the right tool for the job - so off to learn about THAT. Every day, a new adventure - and another twist down the rabbit hole.
Thanks in advance to anyone with some insight / links / tips to share.
encryption owns me
SnoWake4Me said:
<bump>
I'm having the same trouble - and no amount of flashing various stock or CWM recovery gets me to a point where I can actually format / remove the encrypted partition.
The device had been rooted - and then encrypted - and it wasn't until I attempted to reboot into recovery with CWM (hoping to perform a factory reset) that I got into a boot loop.
Days, and countless flashing later - I'm no closer. The one thing I find interesting: when I flash particular (CWM) recovery / images, and reboot - I actually get the 'pre-boot authentication' page, which still accepts my encryption passphrase. It's after this point - that I'm just staring at a black screen.
Perhaps nvflash might be the right tool for the job - so off to learn about THAT. Every day, a new adventure - and another twist down the rabbit hole.
Thanks in advance to anyone with some insight / links / tips to share.
Click to expand...
Click to collapse
I'm facing what I think is a similar problem on an AT&T Galaxy s3 i747 with Paranoid Android. I had to encrypt for work email, and ever since then it regularly reboots whenever I try to do something (~25 second effort)... when I do the factory reset, or try reflashing a ROM, it seems to reboot before the action completes... Can you advise how I might solve this?
I've already tried CWM to redo everything... Factory reset does not complete as it always asks for the encryption password once started again... I just want to get back to unencrypted please. Any ideas? Maybe ODIN CWM then try a new install? formatting my SD card? Thanks in advance...
Hi, I had the same problem as above.
I was unable to factory reset with CWM recovery as it couldn't flash the data partition or sd card and couldn't mount them.
However, using the stock recovery, the factory reset and formatting worked fine returning back to an unencrypted device.
I rooted my device using Gingerbreak.
I have 2.2.2 installed out of the box. I installed CWM. I installed busybox.
Busybox failed. I tried all the versions that it contains.
I checked root status, and RootCheckBasic says I'm rooted.
I installed Flash ClockworkMod Recovery. It will not reboot to CWM.
It only reboots to the standard Android recovery.
I'm trying to install Bumblebee ROM 2.4.
Here are some things I am having issues understanding with it...
Backup current apps and their data with Titanium Backup (available in the Market). Is this required? The phone is new. I have nothing to back up.
Do a nandroid backup in recovery before doing anything else below.
And the nandroid backup is done with CWM? Again CWM won't reboot, only the standard Android recovery boots.
Required if installing BB 2.x for the first time: Wipe. Wipe it all. Data, cache, system, dalvik-cache, sd-ext if you've got it (might need to look under Advanced or Mounts in recovery to do the last two, and while you're there format /system). I assume you wipe it all with CWM while in recovery?
If upgrading from BB 2.3, wipe cache (and only cache) in recovery.
Does not apply to me
If not upgrading from 2.3, install Wiper zip (see below), just to be extra sure that all is wiped. Don't reboot yet. Installing wiper.zip is done by sideloading using adb commands?
Install ROM zip (see below).
I assume this too is done by copying the zip to the external SD, then selecting update from SD card in recovery... right?
Please someone shed some light on this for me.
In standard Android recovery it says e3. I know on my Captivate I had to use Odin to install GB loaders to get it to work.
THANKS!
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
tvall said:
Flashwork mod recovery? Never heard of it.
Try downloading rom manager from the market and use that.
Everything else should be simple
Click to expand...
Click to collapse
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
bulltproof said:
Flash ClockworkMod Recovery
It's in rom manager.
Which I installed from the market.
But I don't get the CWM recovery when I reboot into recovery mode.
I get the standard Android recovery
-you know... the one that just has "install update.zip"
Click to expand...
Click to collapse
Oh, okay, um... are you using the reboot into recovery option in rom manager right after flashing?
After flashing what?
I reboot into recovery through rom manager and get:
Android system recovery <3e>
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
_________________________________________________________
Android System recovery...
Do not pull out the battery!!
After hitting flash clockworkmod recovery, immediately hit reboot recovery
After hitting anything in CWM it did nothing more than reboot into the standard android recovery.
This phone has 2.2.2 on it. Problem? Probably.
I followed instructions at androidcentral and got it to work.
Needed Xionia_CWMA_12518.6_VM
Installed BACKside-IHO-VM670-11222011
using Xionia_CWMA_12518.6_VM_Recovery-signed
Had a little problem today and needed to activate the phone. BUUUUT......
the rom didn't allow activation.
So I installed Bumblebee. No go.
Then I tried [rom] basic stock rom.
Neither of these will let my phone boot. It gets stuck at boot.
Nothing happens.
I can still boot into Xiona_CWMA. But no roms will work.
PLEASE HELP!!!!
Dude i m noob, and i m facing same problem,
I did root with super one click soc, and it is rooted and i am using root needed apps,
But when i m trying to clobk work recovery (i did flashing CWR from rom manager and aft that i select boot from cwr option from rom manager) it just factory reset i did this 3time all time just factory reset, then i again did but while rebooting i click home button so it gave me same option which came to above member said some e3............
And i try to select any option from it with menu button it was not applied, and no use so i removed battry and place again and start then device started dont know more what to do, help
Sent from my LG-P500 using Android-HQ App
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Bullet if u found solution pls tell me too
Sent from my LG-P500 using Android-HQ App
bulltproof said:
Ok, so I CAN load different recoveries.
They work, or at least seem to.
I can flash roms, but nothing happens (bootloop) or the phone comes on and works with a black screen.
I can call my number and can hear the call, but can't see anything.
Click to expand...
Click to collapse
I believe that may be due to the newer display in your phone (I'm new to this device so I dont know much yet). From the little bit of information I've gathered, devices manufactured recently have a different display that requires a kernel that supports it. In the iho roms this is included, on others you'll need to flash a kernel right after the rom.
For the stock rom I can upload what I use if you need it. Its basically the one posted here just with the boot.img swapped with one from a nandroid backup I made before switching roms
I think you're spot on with that idea.
I loaded CM7 variant, and it worked.
My question is, how do I get another ROM on it if it has the newer screen?
I loaded different kernels that were supposed to fix it, but no go.
I just did the biggest F-Up of my flashing life. While following QBKing77's Rooting & CWM with unlocked, at approx 3:50, during the flashing of the root SYSTEM.img file, rather than that file, I used the wrong file to flash used an IMG file that was meant for cwm, which is a completely different task.
So now I am trying to get into fast boot and try to do it with correct SYSTEM.IMG, then to find out I never got it downloaded, the link was deadand now I can not find where to DL it from. I must've not been paying attention and got ahead of myself.
Anyone know where I can a mirror of the file found here. Its the first link in the root section labelled "moto-fastboot flashable /system image".
Am I screwed? Does anybody have a copy of that system.img file laying around. I can not find any mirrors. That is the only way I can see this getting fixed bc I can still go into fastboot mode.
ckeck this ????
http://rootzwiki.com/topic/4137-pudding-photon-pudding-bootloader-unlock-updated-8302011/
Use at own risk. ???
Can u get into rsd mode and flash 154_5 sbf
Sent from my MB855 using xda premium
Important files
Thank shabbypenguin for those
If you can get into rsd mode and connected/recognized in rsd lite you should be able to flash one of those sbf files and return to stock.
I read the instructions carefully! It said to put the oven on 350 degrees for 10mins but for some out of this world reason I put it on broil and let it cook for 20mins :/
Sent from my MB855 using XDA App
LOL no kidding Custodian. I did get a laugh out of that.
Thanks CubanLuke & ShabbyPenguin. I did use RSDLite to flash the current sbf you directed me to, I can boot into the phone again. Thanks again.
Now as to how to proceed, I will have to unlock the bootloader again, np, but when I run into that very step where I broiled it, the rooting via speedboot.... would it be okay to root using AIO instead because I can not find the SYSTEM.IMG needed to follow along w/ the video using this method.
Can I just root a different method, then proceed on with CWM recovery, then flash rom from the video?
enzyme said:
LOL no kidding Custodian. I did get a laugh out of that.
Thanks CubanLuke & ShabbyPenguin. I did use RSDLite to flash the current sbf you directed me to, I can boot into the phone again. Thanks again.
Now as to how to proceed, I will have to unlock the bootloader again, np, but when I run into that very step where I broiled it, the rooting via speedboot.... would it be okay to root using AIO instead because I can not find the SYSTEM.IMG needed to follow along w/ the video using this method.
Can I just root a different method, then proceed on with CWM recovery, then flash rom from the video?
Click to expand...
Click to collapse
- Unlock using derpunlock.sbf
- use fastboot to erase recovery and install CWM recovery
- boot into CWM
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
SOLVED!!! THANK YOU EVERYONE!
KTT16 said:
- Unlock using derpunlock.sbf
- use fastboot to erase recovery and install CWM recovery
- boot into CWM
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
Click to expand...
Click to collapse
Thanks KTT. Okay, I'm back on track now. I am unlocked again, rooted as well. but I am not sure about 2 things. This will be my very first android rom flash and just coming from a big whoopsies, I just want to be sure.....
1) Format system: in cwm recovery, which option is that? I don't see "format system" in the main or advanced menu. Maybe its worded differently?
2) Flash ROM: I can only assume its either "Apply Update from SD" or Update from SD". Not sure which one though.
enzyme said:
SOLVED!!! THANK YOU EVERYONE!
Thanks KTT. Okay, I'm back on track now. I am unlocked again, rooted as well. but I am not sure about 2 things. This will be my very first android rom flash and just coming from a big whoopsies, I just want to be sure.....
1) Format system: in cwm recovery, which option is that? I don't see "format system" in the main or advanced menu. Maybe its worded differently?
2) Flash ROM: I can only assume its either "Apply Update from SD" or Update from SD". Not sure which one though.
Click to expand...
Click to collapse
1) Format system is in the "mount" options. Although it's unneeded to flash a ROM. Personally I just wipe data/factory reset and then wipe cache and have zero issues. Others may tell you different though.
2) "Install .zip from SD Card" then select whichever .zip you're looking to install.
Sent from my MB855 using xda premium
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Flashing the 198_7 sbf unroots and relocks, so you're back to square one.
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Reboot into stock recovery, when you get the recovery logo thing push both volume up and volume down at the same time to get the recovery options. Then do a factory reset and it should boot for you. After that, root and unlock again. And you didn't have the Market because you forgot to install Gapps...
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
The reason cm7 didn't have the market is that you needed to flash gapps. Try doing a hard reset. http://www.hard-reset.com/motorola-photon-4g-hard-reset.html That should do it.
try the 154 sbf
enzyme said:
Okay well I am in some trouble again. successfully flashed an alpha cm7.1, but it didn't have market and the one i installed did not work so decided to flash to cm7.2 via CWM. When it booted I didn't really see anything change, later realized that maybe I was suppose to wipe/format in cwm first(idk).
So I decided to flash 198_7, same one that I used to restore back to stock earlier. But I did not get back to stock. The process was 100%, it told me to manually turn on the device, which was in rsd mode. So I unplugged, pulled batt, reboot. The phone now starts up until the pulsing Moto logo then screen goes black, then it loops.
In the process I lost CWM & unlocked. So trying to flash a ROM via cwm is no longer an option. Any thoughts?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
i had the same problem i think and was going thru boot loops but some one told me to start into recovery when you try you get that ? android screen from there hold down volume up and down at same time then wipe phone booted up fine after that.
It worked like a charm. Thanks. I'm still very new to android and hate to admit it but will be running into problems like these again. The best way to minimize it for me is, not only follow certain directions correctly to get out of these binds, but to understand them.
- So theres an image of the stock ROM stashed away on the phone regardless? And it can be accessed only via the stock recovery? Because after I succeeded in flashing cm7.1, I did a factory reset once from settings>privacy and that restored me to a fresh CM7.1. The factory reset from settings>privacy and in CWM is the same, but both different from the factory reset via STOCK RECOVERY?
- Also what would be the correct method to go from one custom ROM to another? Would it be this? :
(in CWM)
- Format system
- Wipe data/factory reset
- wipe cache/dalvik
- Reboot recovery
- Flash ROM
Or can I just jump to install from zip ?
- Also regarding SD Storage (internal), only holds storage files? So on any fresh ROM there shouldn't be anything in that partition relating to that new ROM yet right? So I can delete things without worry?
You should not have to reboot into recovery, once your wipes are complete, normally you can just flash your ROM of choice in the same recovery session.
Before I flashed anything I would make a backup with CWM so you don't have to keep rooting and unlocking. You can just restore your backup.
Sent from my MB855 using xda premium
After flashing 198 7 sbf, all u need to do is flash derpunlock not go through oem unlocking, then reflash recovery.
Simple generic process for going between roms (assuming already unlocked + cwm recovery flashed; process may be different for some roms, always make sure to read directions, but this is the general concept)
1. Download rom (and gapps if necessary) and put on your sdcard
2. Boot into recovery and make a nandroid backup
3. You made a nandroid backup right?
4. Secure your nandroid backup (move it to your pc or something).
5. You know where your nandroid backup is right?
6. Wipe data/factory reset.
7. Install zip from sd (flash), choose the rom.
8. Reboot system.
At this point your rom should be all set. If for some reason you don't like it, simply boot into recovery and restore your nandroid backup. You can even make nandroid backups of various roms if you want to swap between them for whatever reason.
Hi Guys
I am new to playing around with android but not to electronics. I have a Verizon Samsung Galaxy Tab 10.1 16gb (SCH-i905) with current 4g service.
Here is the problem I am having:
It started yesterday, I was browsing the web and the tablet froze and then rebooted. After the reboot programs randomly freeze and crash, if I reboot anything I have downloaded is gone and anything I deleted is back and I can't install or remove apps. I figured I had something corrupted and a factory wipe would fix it. Unfortunately when I perform a factory wipe from the menus or through Android recovery nothing happens. The tablet boots up like nothing was erased. Still has all my accounts, security pin, apps, and so on.
So after that I figured I would flash the tablet, I found the thread here in the development forum with the stock 3.2 image to load through ODIN. I downloaded everything, followed the instructions. ODIN says the flash was successful but when the tablet reboots it still has all my info and is running 4.0.4. I have tried this multiple times. I have tried loading CWM with ODIN but it will not stick.
Any thoughts? If you need more information I will get it, I am just stuck and can't find anything that helps me with this problem!
Thanks for your help!!!
If you want cwm to load after you install it using odin, then you must immediately boot the tablet into recovery without letting it run normally. During the normal boot process, CWM is deleted and the stock recovery is restored. Therefore once Odin finishes installing CWM, hold the volume up button and once you get to the recovery mode you will be running CWM instead of the stock recovery module.
Regards,
Michael
Yes, I did read that in the multiple thread about installing CWM and have gone into recovery directly after ODIN reboots the tablet, however it is still only the stock recovery app.
Any ideas why the factory reset / data wipe won't work?
So after several more hours working on this problem I think I have come across the root cause. I believe that my internal storage has corrupted and is now only mounting in Read-Only mode. From everything I can find online, without having root access previously, this is a no go for fix it yourself.
In case anybody happens on this post down the road, I have been unable to find a resolution and it would appear I must sent the unit back to Samsung for repair.
Mixinitup4Christ said:
So after several more hours working on this problem I think I have come across the root cause. I believe that my internal storage has corrupted and is now only mounting in Read-Only mode. From everything I can find online, without having root access previously, this is a no go for fix it yourself.
In case anybody happens on this post down the road, I have been unable to find a resolution and it would appear I must sent the unit back to Samsung for repair.
Click to expand...
Click to collapse
factory reset through the stock recovery should be able to get you out of it (RO filesystem).
pershoot said:
factory reset through the stock recovery should be able to get you out of it (RO filesystem).
Click to expand...
Click to collapse
I guess that blows my theory out of the water. I can't make heads or tails with this. No matter what I do, Menu Factory Reset, Recovery Wipe/Reset, ODIN Flash Stock EG01 firmware, ODIN flash CWM Recovery as soon as this device reboots I am right back where I started....... GAH!!!
Thanks for letting me know I'm probably wrong.
Mixinitup4Christ said:
I guess that blows my theory out of the water. I can't make heads or tails with this. No matter what I do, Menu Factory Reset, Recovery Wipe/Reset, ODIN Flash Stock EG01 firmware, ODIN flash CWM Recovery as soon as this device reboots I am right back where I started....... GAH!!!
Thanks for letting me know I'm probably wrong.
Click to expand...
Click to collapse
it has to be factory reset through the stock recovery (it will format /data), not through CWM.
rozeins gone
pershoot said:
it has to be factory reset through the stock recovery (it will format /data), not through CWM.
Click to expand...
Click to collapse
Yup, done that multiple times. I'll take video of it if you want, Factory Reset in stock recovery has no effect.
Mixinitup4Christ said:
Yup, done that multiple times. I'll take video of it if you want, Factory Reset in stock recovery has no effect.
Click to expand...
Click to collapse
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
pershoot said:
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
Click to expand...
Click to collapse
Will Do, ODIN3 1.85?
pershoot said:
odin flash CWM (you can use 6.0.2.8 in JB CM10 folder on droidbasement), boot it and try to format the /system partition first then /data.
Click to expand...
Click to collapse
HI Pershoot!
I forgot to say thanks for your help!! I appreciate someone smarter than me lending a hand.
That said, I just tried to flash CWM from DB Galaxy Roms/CM10 folder. Upon reboot the tablet still entered stock recovery, I have tried this several times, but this time I took a video. If you feel so inclined to watch it maybe you can catch me doing something wrong....
Again thanks for your help!!
Video of me doing the Stock Recovery Factory Reset
Video of me attempting to flash CWM from droid basement
Mixinitup4Christ said:
HI Pershoot!
I forgot to say thanks for your help!! I appreciate someone smarter than me lending a hand.
That said, I just tried to flash CWM from DB Galaxy Roms/CM10 folder. Upon reboot the tablet still entered stock recovery, I have tried this several times, but this time I took a video. If you feel so inclined to watch it maybe you can catch me doing something wrong....
Again thanks for your help!!
Video of me doing the Stock Recovery Factory Reset
Video of me attempting to flash CWM from droid basement
Click to expand...
Click to collapse
I had to do this on mine. http://techne.alaya.net/?p=8829. I rooted and modified the file described in the steps. Weirdly enough it still booted into stock recovery the first time I installed CWM. I installed CWM one more time and the tablet now boots into CWM.
I have an International Samsung galaxy S3 (GT0I9300) which is about 2 years old.
I tried rooting it using chainfire's odin installation method. The link I used is this: http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2.
I followed all the steps correctly. All went fine until the red android came up on my phone. Then after all the process was completed, odin also showed done! But, my phone did not bootup. It is looping in the Samsung logo bootup screen.
I tried all possible methods to turn on the phone, but it still stays in the boot screen itself.
Also my phone is not going to recovery mode when i press <VolUp>+<Home>+<Power button> so that i can wipe cache data, instead it just displays the android recovery logo for a second and reboots again and loops in Samsung logo screen.
I have very valuable data stored in the phone which is not backed up!!
This phone is my daily driver, so I would require some urgent help regarding this...
Please, give me a solution to make my phone work normally as before and also help to root it if possible without any hassle!!
Thank you!
Prataap said:
I have an International Samsung galaxy S3 (GT0I9300) which is about 2 years old.
I tried rooting it using chainfire's odin installation method. The link I used is this: http://forum.xda-developers.com/showpost.php?p=33305784&postcount=2.
I followed all the steps correctly. All went fine until the red android came up on my phone. Then after all the process was completed, odin also showed done! But, my phone did not bootup. It is looping in the Samsung logo bootup screen.
I tried all possible methods to turn on the phone, but it still stays in the boot screen itself.
Also my phone is not going to recovery mode when i press <VolUp>+<Home>+<Power button> so that i can wipe cache data, instead it just displays the android recovery logo for a second and reboots again and loops in Samsung logo screen.
I have very valuable data stored in the phone which is not backed up!!
This phone is my daily driver, so I would require some urgent help regarding this...
Please, give me a solution to make my phone work normally as before and also help to root it if possible without any hassle!!
Thank you!
Click to expand...
Click to collapse
Couple of things you could try (1) flash a stock rom with odin this should restore your phone but you will lose your data (2) flash a custom recovery with Odin either Cwm,PhilZ, or Twrp when finished flashing you can boot into recovery and wipe cache etc.
tallman43 said:
Couple of things you could try (1) flash a stock rom with odin this should restore your phone but you will lose your data (2) flash a custom recovery with Odin either Cwm,PhilZ, or Twrp when finished flashing you can boot into recovery and wipe cache etc.
Click to expand...
Click to collapse
Thank you for your reply!
Will flashing CWM or any of those custom recovery and wiping the cache help in rebooting normally as before? Because I don't want to get into another trouble. Can you kindly give me a link to it? And how to remove that custom recovery if i wont require it?
Prataap said:
Thank you for your reply!
Will flashing CWM or any of those custom recovery and wiping the cache help in rebooting normally as before? Because I don't want to get into another trouble. Can you kindly give me a link to it? And how to remove that custom recovery if i wont require it?
Click to expand...
Click to collapse
Link here please read instructions fully >> http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744 << Ideally you should wipe cache and data to stop a boot loop (but obviously you don't want to lose any data) so try wiping cache to see if that works. Even though you are stuck in a bootloop the cf auto root flash might have worked so you can try to backup data in recovery and see what happens.
To remove custom recovery you will have to reflash stock rom with Odin and you may have to accept the fact you may lose your data if it won't backup in recovery.
tallman43 said:
Link here please read instructions fully >> http://forum.xda-developers.com/gal...covery-clockworkmod-touch-6-0-3-2-gt-t1719744 << Ideally you should wipe cache and data to stop a boot loop (but obviously you don't want to lose any data) so try wiping cache to see if that works. Even though you are stuck in a bootloop the cf auto root flash might have worked so you can try to backup data in recovery and see what happens.
To remove custom recovery you will have to reflash stock rom with Odin and you may have to accept the fact you may lose your data if it won't backup in recovery.
Click to expand...
Click to collapse
Alright!! Thank you!!
I'll try this method and reply if it is working.
@tallman, I just flashed the clockworkmod recovery and wiped the cache partition.
Then as you mentioned I also tried backing up from backup/restore option.
The cache is wiped properly.
When i tired backing up, i saw two or three lines of message log from CWM and then device just boots up and is stuck at Samsung logo boot screen itself again.
Any other solutions?
Prataap said:
@tallman, I just flashed the clockworkmod recovery and wiped the cache partition.
Then as you mentioned I also tried backing up from backup/restore option.
The cache is wiped properly.
When i tired backing up, i saw two or three lines of message log from CWM and then device just boots up and is stuck at Samsung logo boot screen itself again.
Any other solutions?
Click to expand...
Click to collapse
Looks like the root didn't take if I where you I would flash stock rom with Odin from Samfirmware (factory reset after flash) you will lose your data but you will have to put that down to experience.:fingers-crossed:
tallman43 said:
Looks like the root didn't take if I where you I would flash stock rom with Odin from Samfirmware (factory reset after flash) you will lose your data but you will have to put that down to experience.:fingers-crossed:
Click to expand...
Click to collapse
@tallman, Thanks for the advise!
Why didn't the root work?? I thought the root worked as CWM requires root permission right?
Is there any other way to just bootup my device without having to flash a new ROM?? What is the reason for the root access to be denied? Can it never be rooted?
PS: Because I don't wanna lose any data. I had about 250-300 apps which I have been using and had saved a lot of info in them.
Prataap said:
@tallman, Thanks for the advise!
Why didn't the root work?? I thought the root worked as CWM requires root permission right?
Is there any other way to just bootup my device without having to flash a new ROM?? What is the reason for the root access to be denied? Can it never be rooted?
Click to expand...
Click to collapse
Yes you can boot to cwm again and wipe data cache etc but like I said all options now involve loosing your data.Plus this is not guaranteed to work depending on what whent wrong with your cf Auto -Root flash.That is why I suggested flashing back to stock with Odin this will return your phone to how it was before it was messed up (minus your data of course).
tallman43 said:
Yes you can boot to cwm again and wipe data cache etc but like I said all options now involve loosing your data.Plus this is not guaranteed to work depending on what whent wrong with your cf Auto -Root flash.That is why I suggested flashing back to stock with Odin this will return your phone to how it was before it was messed up (minus your data of course).
Click to expand...
Click to collapse
Okay thank you for the help!!
I'll wipe the data or flash a new rom.
Will stock rom not require root access?
Is flashing a custom Rom same as flashing the stock Rom?
Anyone else have any other suggestion?
Prataap said:
@tallman, Thanks for the advise!
Why didn't the root work?? I thought the root worked as CWM requires root permission right?
Is there any other way to just bootup my device without having to flash a new ROM?? What is the reason for the root access to be denied? Can it never be rooted?
PS: Because I don't wanna lose any data. I had about 250-300 apps which I have been using and had saved a lot of info in them.
Click to expand...
Click to collapse
Sorry just saw your question about cwm requiring root..No Cwm or any custom recovery does not reqire root, recovery is a separate partition root is acquired through your rom. Technically you can flash a custom recovery and a custom rom without root because root is included in all custom roms.You need root to access system files that is why cwm failed to backup your data because it needs access to your system which it cannot have without root.Stock roms don't have root built in that is why you need to root them to access system files unlike custom roms which like I said have root built in to them
tallman43 said:
Sorry just saw your question about cwm requiring root..No Cwm or any custom recovery does not reqire root, recovery is a separate partition root is acquired through your rom. Technically you can flash a custom recovery and a custom rom without root because root is included in all custom roms.You need root to access system files that is why cwm failed to backup your data because it needs access to your system which it cannot have without root.Stock roms don't have root built in that is why you need to root them to access system files unlike custom roms which like I said have root built in to them
Click to expand...
Click to collapse
Oh! Alright! :good:
So I guess I'll be flashing a custom rom with kitkat as I'll be losing the data anyways.
All the data in external sd will be intact right?
Prataap said:
Oh! Alright! :good:
So I guess I'll be flashing a custom rom with kitkat as I'll be losing the data anyways.
All the data in external sd will be intact right?
Click to expand...
Click to collapse
Yes ext sd will be fine this is where you will need to put your custom Rom anyway to flash it.Please read all the guides in the stickies before you start to make sure you know what you are doing.Also read the stickies about backing up your efs (VERY IMPORTANT) because if you don't back it up then you may have major problems later if you run into problems.
tallman43 said:
Yes ext sd will be fine this is where you will need to put your custom Rom anyway to flash it.Please read all the guides in the stickies before you start to make sure you know what you are doing.Also read the stickies about backing up your efs (VERY IMPORTANT) because if you don't back it up then you may have major problems later if you run into problems.
Click to expand...
Click to collapse
Thank you!
Anyways, I'll wait a few more days and try to figure out a way to restore my existing stock rom to work.
If not there is no other choice left but to flash a new one...
Is there any way to root my phone again and try backing up the data?? Will it work?
Or is there any working recovery software so that i can create an image of the memory?