Hi mates
@torique hier you have your requested patches... (I have no mirrors, so I'll post the files hier )
Service.jar files modded to get 100% Supercharged on Kitkat
The modded services.jar file allows you to use the Zeppelinrox's Supercharged Script
What's it do?
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
***Taken from the Supercharged Original Thread
Changelog:
Test patches
Credits:
Special thanks to zeppelinrox
torique
ATTENTION
ATTENTION
The script was tested on Galaxy Ace (armv6 device) running CM11. The script seems to work fine, but I've experienced a black screen loop with all the tweaks enabled after rebooting, so be careful mates when you use the Supercharged Script.
Do a BACKUP before doing nothing and getting the 100% Supercharged
HOW TO EXECUTE THE SUPERCHARGED SCRIPT
SUPERCHARGED SCRIPT
Get the Script
Requirements:
- Terminal Emulator
- Supercharged Script
Instructions:
1. Download Supercharged Script ile
2. Rename it as "1.sh" (e.g it's just to go faster )
3. Open the Terminal Emulator and type the following steps.
Code:
su
cd sdcard/download
sh 1.sh
4. Follow the script steps
*** cd sdcard/download is just an example, it could be cd sdcard or the place that contains the script, the real goal is to navigate through the folders and to find the place where the script is located
Patches with 2 options
- Services.jar
- Flashable zip
Instructions for flaschable zip:
1. Download the correct file.
2. Boot into recovery.
3. Install from sdcard.
4. Flash it.
5. WIPE CACHE AND DALVIK-CACHE.
6. Done! Reboot system now
If you want to include it in your build (CM11 based), just rename the file as "services.jar", open the rom's file and replace it in /system/frameworks/ or you can install it manually setting the correct permissions, reboot into CWM and do wipe cache partiotion and wipe dalvik-cache
Code:
____________________
| |
|[B][SIZE="3"] VTR_services.jar[/SIZE][/B] ||
| |
| |
| [B][COLOR="Red"] R W E[/COLOR][/B] |
| [B][COLOR="blue"]Owner[/COLOR][/B][COLOR="White"]![/COLOR] x-x-- |
| [B][COLOR="blue"]Group [/COLOR][/B]x---- |
| [B][COLOR="blue"]Others [/COLOR][/B]x---- |
| |
| |
| [B]AGREE [/B]| [B]CANCEL [/B]|
|____________________|
CM11
Reserved4
Reserved5
Related
Mika Dee said:
Hi farhan can you please guide me how to install supercharger on nAa ICS? Thanks
Click to expand...
Click to collapse
Yeah sure
PLEASE READ EVERYTHING CAREFULLY BEFORE ASKING QUESTIONS
All Credits go to zeppelinrox for his magnificent script
*1st go look at this thread and the 2nd post: Original thread & 2nd post
*Follow these steps to Patch your service.jar file for OOM Priority change:
1. via root browser go to /system/framework/
2. copy the services.jar to the sdcard and then copy it to ur PC
3. go here http://android.mimic.ca/
4. upload ur services.jar file
5. a new page will appear... select the CWM flashable zip and download..
6. copy the zip to sd card and read below
**Patched "services.jar" CWM Flashable Zip for MiniCM9-3.0.2 available for download. See attachments
Download supercharger from the link at the end and save this in the root of your SD card.
zeppelinrox said:
IMPORTANT....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to some funky stuff going on with the su (superuser) binary. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
Click to expand...
Click to collapse
Now follow this steps:
0. Download Script manager from the market.
1. Run the script via Script manager as ROOT
2. Recommended Options for RAM management 256HP--> Ledded(3), Unledded(2), Super Unledded(4)
3. Recommended Options for LAG kIlling: Engine Flash(18), Detailing databases(19)
For SOME reason U cant run script manager.... THEN LETS IMPROVISE:
0. via file manager find the supercharger script file and copy the whole name (with extension)
1. go to terminal emulator
2. write:
Code:
su
{press enter}
3. write:
Code:
cd /sdcard/
{press enter}
4. write:
Code:
sh V6_SuperCharger_for_Android-Update9_RC7.sh.pdf
[u have pasted the name]{press enter}
NOW:
# After applying RAM minfree values you'll be asked to Wipe delvik cache and reboot. and YES u need that...
# U said YES ... Now your delvik cache is wiped and it rebooted.
# ITS TIME TO MAKE UR LAUNCHER DIE-HARD! So Enter CWM Recovery and Flash the previously prepaired zip. REBOOT.
# This time it will take some time to boot as Delvik cache has been wiped and has to be rebuild.
NOW Dealing with Stickiness of your applied Minfree values:IMPORTANT
#Run the Script again.
#U will see that it says about a percentage of supercahged-ness...
#If ur applied minfree values has not sticked a file will open which will say what to do to make these values fixed.
{For this u'll need script manager}
0. open script manager
1. go to /system/etc/init.d/
2. u'll see a file named "99supercharge" click on it...
3. give it the permission for ROOT and RUN AT BOOT and run.
4. script manager will run at every boot and fix ur minfree values.
WARNING: IF Script manager Can Not Run at boot for some reason minfree values will not be applied.
LAG KILLING:
Two options i use to kill lag. : 1. Engine Flush (18)
2. Detailing A.K.A Vaccuming (19)
# If u Run these from the main script a terminal emulator shortcut will be created
# after days of use if u feel choppy and laggy u can apply them via terminal emulator
Detailing/Vaccuming:
[info: this will re-index ur databases to make ur phone faster]
Open terminal emulator
Code:
su
{press enter}
Code:
vac
{press enter}
DONE!!
Engine Flush:
Open terminal emulator
Code:
su
{press enter}
Code:
flush
{press enter}
DONE!!!
Enjoy it... like a boss!
zeppelinrox said:
Updated April 10, 2012: - V6 SuperCharger Update 9 RC8.2
.................................... - Fixed - Bug when trying to apply calculated values automatically on rookies' first run - it would just loop back to menu
.................................... - Fixed - Bug regarding fix emissions option when resupercharging.
.................................... - Fixed - Bug regarding the installation marker in build.prop.unsuper.
.................................... - Improved - Has proper rounding of decimals instead of just truncating them. This was a royal pain in the ass.
.................................... - Enhanced - User prompts. No more confusion regarding the "applet not found" note
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Code a bit
Updated April 03, 2012: - V6 SuperCharger Update 9 RC8.1
.................................... - Fixed - Bug where the script appied all 0s for the minfrees
.................................... - Fixed - Bug where the script would crash when supercharging current minfrees that had a decimal value (ie. 32.532 MB was bad)
Updated April 02, 2012: - V6 SuperCharger Update 9 RC8
.................................... - Added - Fix Emissions Script! (Fix Permissions)
.................................... - Added - Option to run Fix Emissions on boot! (Does NOT slow down boot time!)
.................................... - Removed - Market links to BusyBox Installer (suddenly half assed busybox builds are running rampant ;p)
.................................... - Added - Link to my OP to get BusyBox builds compiled by wraithdu instead (So There! smali ass busybox builds!)
.................................... - Added - Automatic direction to use calculated values for Rookies! (after selecting Driver Options)
.................................... - Added - Support for a couple of more launchers
.................................... - Tweaked - Delay time in *97BulletProof_Apps - reduced to 30 seconds from 60 seconds. Shouldn't effect battery life since it still goes to deep sleep as it always does.
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Interface and user prompts.
.................................... - Changed - "Help File" to "Owner's Guide"
.................................... - Removed - Most DNS Tweaks (too many weird connection issues started happening)
.................................... - Tweaked - net.tcp.buffersize.* settings
.................................... - Changed - "Market" to "Google Play"
Click to expand...
Click to collapse
Downloads:
Mirrors are discoraged
V6 supercharger Updates (the latest are at the last of the post)
This thread will be updated with each update of of the original thread
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Shimizux said:
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Click to expand...
Click to collapse
no prob. dude! enjoy!
Cannot download the attached .pdf file.
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
virajt said:
Cannot download the attached .pdf file.
Click to expand...
Click to collapse
Yep, Failed to Load PDF Document.
why it is in .pdf not .sh?
can you also upload the patch service.jar you used in nAa ICS.
Thanks
working on it... i can download the files btw!
and its in .sh.pdf
it is recognized as script anyway!
Shimizux said:
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
Yep, Failed to Load PDF Document.
Click to expand...
Click to collapse
yes u hav to patch it again...
mediafire mirror updated!
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Shimizux said:
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Click to expand...
Click to collapse
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
farhanzahinfj said:
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
Click to expand...
Click to collapse
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
to download just right click on the first link and save as option.
Trying
Shimizux said:
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
Click to expand...
Click to collapse
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
farhanzahinfj said:
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yezza ! i already choose Option 4
Works great !
Thanks Again Man
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
wakoko79 said:
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
Click to expand...
Click to collapse
go to the original thread... link in the OP
Thread Updated! new script update9 RC8.... changelog added... fixes for superuser binary !!
Updated V6 U9RC8.1
I got syntax error on line 5555! In both 8.1 and 8 scripts.
Dear friends i found new scripts mod by @Exit_Only ...
http://forum.xda-developers.com/showthread.php?t=2411161
I'm Using this mod for many weeks and still no problem exists..
Wifi tether and direct also works under this mod..
Default Scripts | 10/03/2013 | Team Kernelizers | Operation Killjoy™ | RC7 | Insanity
OPERATION KILLJOY™
TEAM KERNELIZERS PRESENTS...
Operation Killjoy™ This tweak package takes your android device to a whole new level of awesomeness. Big thanks to all the developers involved.
THIS TWEAK PACKAGE IS 100% UNIVERSAL ON ALL DEVICES RUNNING ANDROID 4.0 OR HIGHER!!!
CREDITS:
Thanks to all my testers
First and foremost I want to thank team kernelizers for taking me inas a member of there team
@malybru (for the awesome banner)
@Ryuinferno(For the entro binary)
@LENAROX(For all your recommendations)
@Koush(For being an awesome coder)
@CyanogenMod(Do I need to say why)
@mw86(Being an amazing tester and debugger)
@idcrisis(For haveged binary for entropy)
@thomas.raines(Just a general thanks)
@jrummy16(Being an awesome coder)
@kejar31
@kobridge(Awesome scripter)
@zeppelinrox(Awesome scripter, most scripts on xda is because of your genius)
@Chainfire(Touchscreen script)
@ImbaWind(ICS ram flush boost script)
@GideonX(Awesome kernel dev
@RErick(Team k)
@decialman(Team k)
@castle_bravo(Team k)
@dsexton(Remount and readahead original dev)
@Juwe11(Original Minfree script)
@noobnl(GS3 maintainer for CM)
Any one else? If I forgot you please pm me and it will be fixed ASAP!!!
ATTENTION DEVELOPERS: I REALLY DO NOT WANT ANY DEVELOPER USING MY TWEAKS FOR ANYTHING. DUE TO UNFORTUNATE INCIDENTS ON XDA I RESPECTFULLY ASK NO DEVELOPER USE KILLJOY IN THERE PROJECT, TWEAK, MOD, KERNEL, ROM OR ANY OTHER TYPE PROJECT. PLEASE ADD A LINK TO YOUR OP BUT DO NOT INCLUDE IT IN YOUR ZIP FILE.
My Donations: https://www.paypal.com/cgi-bin/websc...=V6B74D49LB3SW
CURRENT DONATIONS RECEIVED:
Melanie (Unknown XDA Screen name) - $10.00 @azuma37 (XDA) - $5.00
Unknown name / Unknown XDA Username - $5.00 @iamsmallpang - $5.00 @RErick - $75.00 @jakereeves - $20.00 @Samurai - $5.00
Updated on 8/19/2013 @ 6:55am P.D.T
General Q & A Section:
Q.)How can I tell if this is actually working or not?
A.)Open Terminal Emulator and type this command...
Code:
su
killjoy
Q.)Help!!! Why is my phone bootlooping?
A.)I need more detailed information like what device you have, what version of android are you on, what recovery are you using? Better yet please get me a adb boot logcat as well.
Q.)Build.prop tweaks did not inject!!! Why?
A.)You don't have init.d support!!!
Q.)But my kernel supports init.d so why is my buildprop not getting injected?
A.)Well obviously you don't have init.d support cause if you did the build.prop would have been injected.
Q.)How can I test to see if I have init.d support?
A.)Flash this - http://www.mediafire.com/?97q4sh1wwcesois
Once you flash it then go into /data folder and look to see if you have a file called "okj_test.log", no log means no init.d support. END OF STORY!!!
Standard Disclaimer: Flash at your own risk. Myself nor XDA is responsible for any damage this thing may cause you. If your phone blows up after flashing this and you point the finger at me or team kernelizers I will laugh at you!!!
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.
WHAT IS NEEDED:
1.) Root access (su binary required)
2.) Need to be on 4.0 ICS or higher
3.) Terminal Emulator app
4.) Enough space in your /system partition (10 mb available minimum)
If you do not meet these requirements then DO NOT USE IT!!!
5.) A kernel that has init.d support built into it or another init.d support method.
If you don't meet all these requirement DO NOT use this package!!!
1.) Make sure you meet the requirements above
2.) Download the latest version of Operation Killjoy™
3.) Boot into recovery (CWM recovery)
4.) Make a nandroid backup
5.) Flash inside CWM recovery
6.) Reboot...
7.) Profit...????
ABOUT THE TWEAKS:
1.) 2 init.d script
2.) Entropy Generator
Turn on entropy...
Code:
su
entro_on
Turn off entropy...
Code:
su
entro_off
Check available entropy levels type (YOU MUST HAVE ACTIVATED ENTROPY RESTORE BEFORE ATTEMPTING THIS)
Code:
su
entro
3.) Ext4 Tweaks
4.) Zero UI Lag
5.) Maxed out speed & Performance
6.) Disables most logging activities
7.) Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
8.) Multiple VM & Net tweaks
9.) RAM booster binary (Recover lost ram on the go without rebooting)
Choose between moderate and aggressive ram boost...
Code:
su
boost
10.) Killjoy™ Binary (Exit_Only Exclusive)
Code:
su
killjoy
11.) Very light weight and fast
12.) CpuControl script that is 100% user tweaked via root explorer
If you are running ANY overclock apps then cputuner IS NOT for you!!! Cputuner will check to see if your running an OC app and will kick you out of cputuner if it detects said app!!!
I'll add more as I remember it :thumbup::beer:
08-18-13: First Release
08-19-13: Fixed All Derps
08-26-13: Completely Revamped CPU Tuner
Read ahead adjusted from 3072 to 2048 kb
Added new cat logging feature from tkmod (MERGED)
Added GPU Rendering from tkmod (MERGED)
Added buildprop script modified from tkmod (MERGED)
Redid entire init.d script from ground up and added samsung touchscreen mod (NOT APPICIBLE ON ALL SAMSUNG MODELS)
Numerous adjustments to code overall
08-29-13_test: Removed GPU render script
Removed build prop injector
Adjusted some values for better stability
09-02-13_official: Removed all test scripts
Fixed licensing errors
Fixed all errors
Removed cputuner to kill developer conflicts
Stable release
09-03-12_official: Fixed multiple bugs
No new features added
09-05-13_official: Made buildprop script busybox dependent
Fixed random rebooting
Fixed laginess
Fixed buildprop tweaks not installing on TWRP
Much better battery life and stability
09-08-13_RC2: Fixed bootloops happening because of read ahead scripts
Added testinitd script that will tell you whether you have init.d support, look in /data/killjoy/*
Adjusted a lot of stuff for better stability and battery life
Fixed logging issue from RC1
Official Release Canidiate v2
09-10-13_RC3: No more support for gingerbread devices
Must be running android 4.0 or higher or script will abort
Fixed lag issues
Killed logcating again
Adjusted build.prop script
Removed all test scripts
10-02-13_RC7: Added intellidemand governor to cputuner
Removed unstable commented out code
Updated to newest busybox
Fixed killjoy binary
Updated version number
OFFICIAL RELEASES
09-05-2013_official: http://www.mediafire.com/?41gw8d3tude71q3
OFFICIAL RELEASE CANIDIATES
10-02-2013_RC7: http://www.mediafire.com/?861h11n1767gu15
TEST RELEASES
No test releases yet!!!
WARNING: THESE ARE EXPERIMENTAL BUILDS ONLY. FLASH AT YOUR OWN RISK!!! Some of these builds will be super stable and others may not be stable at all. Keep in mind I do test every release so it will be at least semi stable.
KNOWN ISSUES & BUGS:
1.) Bootloops have happened on a few devices using TWRP Recoveries, Current workaround is use CWM Recovery.
2.) Build.prop injection tool not working on TWRP v2.6.0.0+ on multiple devices. Current workaround is use CWM Recovery.
XDA Script & Code Developer
Check out my github: http://github.com/ExitOnly
In support of Android Open Source Project (AOSP)
Current Device:
Samsung Galaxy S III (d2spr)
Current Setup:
CM10.1.1 Nightly w/ RNGD Entropy generator
Direct Injection Turbo Custom Tweaks
0-60 in less then 2 seconds
How to uninstall killjoy!!!
1.) Open terminal emulator
2.) Type these commands
Code:
su
uninstall
3.) Reboot your device
4.) Killjoy is gone
hello. would like to know how to make this script run on every boot?
zamurai x said:
hello. would like to know how to make this script run on every boot?
Click to expand...
Click to collapse
this script run over every boot automatically..
Note : I'm just sharing the work of the XDA Member DorianX.This mod was tested on stock deodexed and it was working fine.I'm not sure that it'll work on CM7 or not.Please test and report here.
:: Introduction ::..
XTweaks is a script pack something like others availables on XDA BUT with some of the logic from
SuperCharger V6 by zeppelinrox
(automatically set some values based on your total available RAM).
I've been using this scripts in my custom roms and it worked fine, so I decided to release it to public.
Click to expand...
Click to collapse
:: In the pack ::..
/data/tmp/* (This is a temporary folder that contain libncurses.so and sqlite3, from android 2.3.x to 4.4.x,
these files are required to run some scripts correctly).
/system/bin:
uninstall (This is an uninstaller, in case that you don't like the mod just go to terminal emulator and type:
su [enter], uninstall [enter] then XTweaks will get uninstalled and your phone will reboot by itself).
uninstallboot (This is an uninstaller for bootanimation only just go to terminal emulator and type:
su [enter], uninstallboot [enter]).
/system/etc/init.d:
00Buildprop (This script will add some values to build.prop on first boot then will be deleted by itself).
00SQlite (This add libncurses.so to /system/lib, sqlite3 to /system/xbin, then will be deleted by itself).
01Ksm (This enable "Kernel SamePage Merging" (KSM))
02Ram_Anim (Better memory management).
03Gov_Sched_Tweaks (This contain some Governor & I/O Scheduler tweaks).
04System_Tweaks (Another memory tweaks and kernel tweaks for better battery life).
05SDCard_Tweaks (This script change the read_ahead_kb value to 2048, faster speeds on SD card).
06NetSpeed_Security (You will get faster conections on WiFi/Mobile Network).
07Cleaner (This clear some unnecessary data and disables logcat) (if you need to get a logcat delete this script).
08Fix_Emissions (This script made it by zeppelinrox fix permissions to your apps and folders every boot preventing force closes).
09Detailing (This script optimize the database for your apps every boot also made it by zeppelinrox).
10Flush-O-Matic (This script clear the cached apps every hour so will get more true free RAM also made it by zeppelinrox).
/system/media:
bootanimation.zip (Customized bootanimation based on Nexus 7's 4.4).
/system/xbin:
busybox (Is the latest busybox by Stericson (1.21.1) needed to run all the scripts, root, etc.).
/tools:
backup.sh (This is a temporary script that makes a backup of your ini.d folder and your current bootanimation (if your ROM have a regular /system/media/bootanimation.zip)).
busybox (This is a temporary busybox to get run the installer).
Click to expand...
Click to collapse
..:: Requirements ::..
- Rooted phone.
- Android 2.3+.
- Kernel/ROM with init.d support.
- 10mb free in system.
- Custom recovery.
Click to expand...
Click to collapse
..:: Installation ::..
- Download the latest version of this mod.
- Copy it on your sd card.
- Go to recovery mode.
- Flash it.
- Reboot.
- Enjoy!
..:: F.A.Q. ::..
Q. How can I uninstall this mod?
A.Go to terminal and type this :
su
uninstall
Q. How can I uninstall the integrated bootanimation?
A.Go to terminal and type this :
su
uninstallboot
Q. Is this mod compatible with other mods?
A. Maybe with Crossbreeder but you need to test it, first install this mod then install the one you want to try.
Click to expand...
Click to collapse
..:: Downloads ::.. : http://www.mediafire.com/download/a3i6wxh3rnhgng6/XTweaks-1.0.1.zip
Original Thread : http://forum.xda-developers.com/showthread.php?t=2574443
Credits :
DorianX
Click to expand...
Click to collapse
No one pressed the Thanks button!!
Hi mates
@Mardon hier you have your requested patches... (I have no mirrors, so I'll post the files hier )
Service.jar files modded to get 100% Supercharged on Kitkat
The modded services.jar file allows you to use the Zeppelinrox's Supercharged Script
What's it do?
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
*** Taken from the Supercharged Original Thread
Changelog:
Test patches;
-Tested by @Mardon +208 Point more in AnTuTu Benchmark (just with the modded sevices.jar file)
Credits:
Special thanks to zeppelinrox
Mardon
ATTENTION
ATTENTION
The script was tested on Galaxy Ace (armv6 device) running CM11. The script seems to work fine, but I've experienced a black screen loop with all the tweaks enabled after rebooting, so be careful mates when you use the Supercharged Script.
Do a BACKUP before doing nothing and getting the 100% Supercharged
HOW TO EXECUTE THE SUPERCHARGED SCRIPT
SUPERCHARGED SCRIPT
Get the Script
Requirements:
- Terminal Emulator
- Supercharged Script
Instructions:
1. Download Supercharged Script ile
2. Rename it as "1.sh" (e.g it's just to go faster )
3. Open the Terminal Emulator and type the following steps.
Code:
su
cd sdcard/download
sh 1.sh
4. Follow the script steps
*** cd sdcard/download is just an example, it could be cd sdcard or the place that contains the script, the real goal is to navigate through the folders and to find the place where the script is located
Patches with 2 options
- Services.jar
- Flashable zip
Instructions for flaschable zip:
1. Download the correct file.
2. Boot into recovery.
3. Install from sdcard.
4. Flash it.
5. WIPE CACHE AND DALVIK-CACHE.
6. Done! Reboot system now
If you want to include it in your build (CM11 based), just rename the file as "services.jar", open the rom's file and replace it in /system/frameworks/ or you can install it manually setting the correct permissions, reboot into CWM and do wipe cache partiotion and wipe dalvik-cache
Code:
____________________
| |
|[B][SIZE="3"] VTR_services.jar[/SIZE][/B] ||
| |
| |
| [B][COLOR="Red"] R W E[/COLOR][/B] |
| [B][COLOR="blue"]Owner[/COLOR][/B][COLOR="White"]![/COLOR] x-x-- |
| [B][COLOR="blue"]Group [/COLOR][/B]x---- |
| [B][COLOR="blue"]Others [/COLOR][/B]x---- |
| |
| |
| [B]AGREE [/B]| [B]CANCEL [/B]|
|____________________|
CM11
Reserved3
Done @Zerathul
Hello there guys. So, I have this fcking annoying problem... I just changed my ROM from CM Kitkat one to Resurrection 5.1 but now I have problems while trying to install GApps - it gives me Error Code: 70 I tried googling this error and found THIS but the problem is that all posts were edited/deleted so I can't find an answer anymore... Maybe someone could help me or explain what to do to fix this problem? :crying:
GeoPrey said:
Hello there guys. So, I have this fcking annoying problem... I just changed my ROM from CM Kitkat one to Resurrection 5.1 but now I have problems while trying to install GApps - it gives me Error Code: 70 I tried googling this error and found THIS but the problem is that all posts were edited/deleted so I can't find an answer anymore... Maybe someone could help me or explain what to do to fix this problem? :crying:
Click to expand...
Click to collapse
You need to either use the smallest gapps package available or repartition to a bigger /system.
You can try wiping /system, then installing the rom and small gapps(for example the arm;5.1;pico from HERE)
Or follow the steps from HERE to increase your system partition
noppy22 said:
You need to either use the smallest gapps package available or repartition to a bigger /system.
You can try wiping /system, then installing the rom and small gapps(for example the arm;5.1;pico from HERE)
Or follow the steps from HERE to increase your system partition
Click to expand...
Click to collapse
thanks for your help, installing pico gapps worked for me :good:
the reason for that you trying to install all Gaps package which is not possible for your device according to space calculation
To fix this problem do these steps
1-create text file and name it ( gaps-config)
2-add these lines
Exclude Books
Exclude Chrome
Exclude CloudPrint
Exclude Docs
Exclude Earth
Exclude ExchangeGoogle
Exclude Slides
Exclude Sheets
Exclude NewsWidget
Exclude PlayGames
Exclude Keep
Exclude Hangouts
Exclude Fitness
then save the text file in the same gaps.zip file directory
3-now flash the gaps and done..
note you can exclude more aps or include other as you want as long as you had the space requirements .
i just downloaded only one Gaps package which is the full package , and then i customize which app to include or exclude and here is my review related to this error ( skip to 13 minute )
Gapps cant Install
Hello,
i repartitioned my i9100 (galaxy S2) with the 12GB pit file, formattet all partitions (when asked i uste ext4), installed Cyanomod (newest nightly). Now i'm trying to install gapps. It doesnt work.
error 70
can somebody help me?
log is following:
Code:
# Begin Open GApps Install Log
-----------------------------------------------------------------------------
ROM Android Version | 5.1.1
ROM ID | cm_i9100-userdebug 5.1.1 LMY49F 54ee8f45e6 test-keys
ROM Version | 12.1-20160129-NIGHTLY-i9100
Device Recovery | CWM-based Recovery 6.0.4.8-StanTRC
Using Bundled XZdec | true
Device Name | GT-I9100
Device Model | GT-I9100
Device Type | phone
Device CPU | armeabi-v7a,armeabi
getprop Density |
default.prop Density |
build.prop Density | 240
Display Density Used | 240dpi
Install Type | Dirty[Data NOT Wiped]
Google Camera Installed¹ | false
FaceUnlock Compatible | true
Google Camera Compatible | true
New Camera API Compatible | false
Current GApps Version | No GApps Installed
Installing GApps Version | 20160131
Installing GApps Type | nano
Config Type | exclude
Using gapps-config | Not Used
Remove Stock/AOSP Browser | false[NO_Chrome]
Remove Stock/AOSP Camera | false[NO_CameraGoogle]
Remove Stock/AOSP Email | false[NO_Gmail]
Remove Stock/AOSP Gallery | false[NO_Photos]
Remove Stock/AOSP Launcher | false[NO_GoogleNow]
Remove Stock/AOSP MMS App | false[NO_Hangouts]
Remove Stock/AOSP Pico TTS | false[NO_GoogleTTS]
Ignore Google Contacts | false
Ignore Google Keyboard | false
Ignore Google Package Installer | false
Ignore Google NFC Tag | true[NoRemove]
Ignore Google WebView | false
SwypeLibs | 0 (KB)
Total System Size (KB) | 507848
Used System Space (KB) | 406268
Current Free Space (KB) | 91096
Additional Space Required (KB) | 95552 << See Calculations Below
-----------------------------------------------------------------------------
¹ Previously installed with Open GApps
# End Open GApps Install Log
INSTALLATION FAILURE: Your device does not have sufficient space available in
the system partition to install this GApps package as currently configured.
You will need to switch to a smaller GApps package or use gapps-config to
reduce the installed size.
# Begin GApps Size Calculations
-----------------------------------------------------------------------------
TYPE | DESCRIPTION | SIZE | TOTAL
| Current Free Space | 91096 | 91096
Remove | Existing GApps | + 0 | 91096
Remove | Obsolete Files | + 32 | 91128
Install | Core² | - 75796 | 15332
Install | calsync³ | - 1244 | 14088
Install | facedetect³ | - 544 | 13544
Install | faceunlock³ | - 14564 | -1020
Install | search³ | - 40704 | -41724
Install | speech³ | - 44612 | -86336
| Buffer Space² | - 9216 | -95552
-----------------------------------------------------------------------------
Additional Space Required | 95552
-----------------------------------------------------------------------------
² Required (ALWAYS Installed)
³ Optional (may be removed)
# End GApps Size Calculations
# Begin User's gapps-config
# End User's gapps-config
Heple!!
I tried installing super, error 70, tried pico, installed, boot phone and some setup wizard keeps crashing unstoppably. Help me!! (Htc One M8 CM13)
It might also help to wipe /system before flashing ROM and Gapps.
Still no solution?
I still have the problem on my S2 i9000. No one who have find a fix?
noppy22 said:
You need to either use the smallest gapps package available or repartition to a bigger /system.
You can try wiping /system, then installing the rom and small gapps(for example the arm;5.1;pico from HERE)
Or follow the steps from HERE to increase your system partition
Click to expand...
Click to collapse
Thank you so much!! I had installed CM13 on my Galaxy SII I9000, but couldn't install gapps, not even the pico version!. So i had to increase the system partition to 4GB I91001GB_3GB. Now i didn't get the "Error 70", and installed gapps successfully!
---------- Post added at 07:56 PM ---------- Previous post was at 07:46 PM ----------
GaffaDuck said:
I still have the problem on my S2 i9000. No one who have find a fix?
Click to expand...
Click to collapse
Sorry i'm new here.... how do i delete message?
Harmone said:
I tried installing super, error 70, tried pico, installed, boot phone and some setup wizard keeps crashing unstoppably. Help me!! (Htc One M8 CM13)
Click to expand...
Click to collapse
I had the same problem. Im not sure if your doing it right, you have to flash your ROM then flash your GAPPS file all together and then reboot.
FlyEditz said:
I had the same problem. Im not sure if your doing it right, you have to flash your ROM then flash your GAPPS file all together and then reboot.
Click to expand...
Click to collapse
Me Too
My Device:
I have a Htc One mini m4.
I have flash a custom Rom: cm-11-20160208-NIGHTLY-m4 . I have flash my ROM a few days ago. What can i do get Google Playstore now?
thx for help.
need help pls
gave up googling
I could not get rid of the "error 70" which always told me, I got insufficient system partition size, even after rePITting it to 3GB.
So I packed my own tiny thing for Marshmallow 6.0 and up. Hopefully it will help you guys also.
https://www.androidfilehost.com/?fid=24457741883932758
Greetz
Truhse said:
I could not get rid of the "error 70" which always told me, I got insufficient system partition size, even after rePITting it to 3GB.
So I packed my own tiny thing for Marshmallow 6.0 and up. Hopefully it will help you guys also.
https://www.androidfilehost.com/?fid=24457741883932758
Greetz
Click to expand...
Click to collapse
Hopefully those gapps work and thank you for posting them.
But when you re-pitted, you probably only changed the /data partition and not the /system partition
It's all explained in at least two OP's(CM13 and Mokee MM) as well as this guide
Install diskinfo app from the store to check your partition sizes
Please note: The package I linked above was only working for few minutes for me, but then the play store began instantly to close after launching...... again and again and neverending. So, be warned!
I tried "I9100_3GB data - 45mb preload.pit" aswell as "I9100_4GB data - 45mb preload.pit". The system partition gets enhanced by adding the preload partition, except those 45mb, and shrinking the data partition. So, I am pretty sure my 800mb system partition which I had before icreased to 3gb while data gone from somewhat with 12gb to somewhat with 10gb.
But anyway, if I am missing any point I will have a look at this diskinfo app to get from "pretty sure" to "absolutley sure".
Any ideas left? Someone? Verflixter Mist.....
Cheers
I tried all gapps package I could find without any succes.
@Truhse
As I said, you are enlarging /data with those pit files.
Go HERE and use a pit file with I91001GB_xGB.pit in the name
The 1GB is the /system, the xGB is the /data. Some of the pit files available(such as the ones you have used) were made purely to install more apps to /data(ie from the store), before there was a need to enlarge the /system for rom and gapps
I have the same issue with CM13snapshot on Xiaomi Mi3w. I can install pico gapps but not stock one. Settings wizzard and google apps keeps crashing even with pico.
@noppy22: you were correct. it seems that I extracted the wrong PIT-file and rushed to fast through the flashing process, I even did not noticed the mess I made afterwards. I was so sure, the PIT-file was the right one.... dunno why.
Sorry. Now, everything is nice with 1GB for my system and 3GB for my apps.
Greetz
Truhse said:
I could not get rid of the "error 70" which always told me, I got insufficient system partition size, even after rePITting it to 3GB.
So I packed my own tiny thing for Marshmallow 6.0 and up. Hopefully it will help you guys also.
https://www.androidfilehost.com/?fid=24457741883932758
Greetz
Click to expand...
Click to collapse
is there one for 6.0 ..?
Hi guys, I also have the same error even i have checked i'v got 555MB free space in system (1GB total)
---------- Post added at 08:12 PM ---------- Previous post was at 07:17 PM ----------
Now i'm thinking that stock gapps are to large even for 1GB of system storage. Try use smaller. It worked for me. What's more make factory reset after installing or install it just after soft in order to optimize apps.
Solution!!!
Opengapps is highly customizable. You can put a .gapps-config file in the same folder as the pico zip, with commands to control what it installs and also to remove some stock apps to make room. So just now I had one with these lines:
Code:
# stock removals
Browser
CMAccount
CMUpdater
Email
ExchangeStock
Credits:User aaopt on xdaforums
Refrence:http://forum.xda-developers.com/showpost.php?p=68255955&postcount=467