Hi mates
@Mardon hier you have your requested patches... (I have no mirrors, so I'll post the files hier )
Service.jar files modded to get 100% Supercharged on Kitkat
The modded services.jar file allows you to use the Zeppelinrox's Supercharged Script
What's it do?
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
*** Taken from the Supercharged Original Thread
Changelog:
Test patches;
-Tested by @Mardon +208 Point more in AnTuTu Benchmark (just with the modded sevices.jar file)
Credits:
Special thanks to zeppelinrox
Mardon
ATTENTION
ATTENTION
The script was tested on Galaxy Ace (armv6 device) running CM11. The script seems to work fine, but I've experienced a black screen loop with all the tweaks enabled after rebooting, so be careful mates when you use the Supercharged Script.
Do a BACKUP before doing nothing and getting the 100% Supercharged
HOW TO EXECUTE THE SUPERCHARGED SCRIPT
SUPERCHARGED SCRIPT
Get the Script
Requirements:
- Terminal Emulator
- Supercharged Script
Instructions:
1. Download Supercharged Script ile
2. Rename it as "1.sh" (e.g it's just to go faster )
3. Open the Terminal Emulator and type the following steps.
Code:
su
cd sdcard/download
sh 1.sh
4. Follow the script steps
*** cd sdcard/download is just an example, it could be cd sdcard or the place that contains the script, the real goal is to navigate through the folders and to find the place where the script is located
Patches with 2 options
- Services.jar
- Flashable zip
Instructions for flaschable zip:
1. Download the correct file.
2. Boot into recovery.
3. Install from sdcard.
4. Flash it.
5. WIPE CACHE AND DALVIK-CACHE.
6. Done! Reboot system now
If you want to include it in your build (CM11 based), just rename the file as "services.jar", open the rom's file and replace it in /system/frameworks/ or you can install it manually setting the correct permissions, reboot into CWM and do wipe cache partiotion and wipe dalvik-cache
Code:
____________________
| |
|[B][SIZE="3"] VTR_services.jar[/SIZE][/B] ||
| |
| |
| [B][COLOR="Red"] R W E[/COLOR][/B] |
| [B][COLOR="blue"]Owner[/COLOR][/B][COLOR="White"]![/COLOR] x-x-- |
| [B][COLOR="blue"]Group [/COLOR][/B]x---- |
| [B][COLOR="blue"]Others [/COLOR][/B]x---- |
| |
| |
| [B]AGREE [/B]| [B]CANCEL [/B]|
|____________________|
CM11
Reserved3
Done @Zerathul
Related
Mika Dee said:
Hi farhan can you please guide me how to install supercharger on nAa ICS? Thanks
Click to expand...
Click to collapse
Yeah sure
PLEASE READ EVERYTHING CAREFULLY BEFORE ASKING QUESTIONS
All Credits go to zeppelinrox for his magnificent script
*1st go look at this thread and the 2nd post: Original thread & 2nd post
*Follow these steps to Patch your service.jar file for OOM Priority change:
1. via root browser go to /system/framework/
2. copy the services.jar to the sdcard and then copy it to ur PC
3. go here http://android.mimic.ca/
4. upload ur services.jar file
5. a new page will appear... select the CWM flashable zip and download..
6. copy the zip to sd card and read below
**Patched "services.jar" CWM Flashable Zip for MiniCM9-3.0.2 available for download. See attachments
Download supercharger from the link at the end and save this in the root of your SD card.
zeppelinrox said:
IMPORTANT....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to some funky stuff going on with the su (superuser) binary. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
Click to expand...
Click to collapse
Now follow this steps:
0. Download Script manager from the market.
1. Run the script via Script manager as ROOT
2. Recommended Options for RAM management 256HP--> Ledded(3), Unledded(2), Super Unledded(4)
3. Recommended Options for LAG kIlling: Engine Flash(18), Detailing databases(19)
For SOME reason U cant run script manager.... THEN LETS IMPROVISE:
0. via file manager find the supercharger script file and copy the whole name (with extension)
1. go to terminal emulator
2. write:
Code:
su
{press enter}
3. write:
Code:
cd /sdcard/
{press enter}
4. write:
Code:
sh V6_SuperCharger_for_Android-Update9_RC7.sh.pdf
[u have pasted the name]{press enter}
NOW:
# After applying RAM minfree values you'll be asked to Wipe delvik cache and reboot. and YES u need that...
# U said YES ... Now your delvik cache is wiped and it rebooted.
# ITS TIME TO MAKE UR LAUNCHER DIE-HARD! So Enter CWM Recovery and Flash the previously prepaired zip. REBOOT.
# This time it will take some time to boot as Delvik cache has been wiped and has to be rebuild.
NOW Dealing with Stickiness of your applied Minfree values:IMPORTANT
#Run the Script again.
#U will see that it says about a percentage of supercahged-ness...
#If ur applied minfree values has not sticked a file will open which will say what to do to make these values fixed.
{For this u'll need script manager}
0. open script manager
1. go to /system/etc/init.d/
2. u'll see a file named "99supercharge" click on it...
3. give it the permission for ROOT and RUN AT BOOT and run.
4. script manager will run at every boot and fix ur minfree values.
WARNING: IF Script manager Can Not Run at boot for some reason minfree values will not be applied.
LAG KILLING:
Two options i use to kill lag. : 1. Engine Flush (18)
2. Detailing A.K.A Vaccuming (19)
# If u Run these from the main script a terminal emulator shortcut will be created
# after days of use if u feel choppy and laggy u can apply them via terminal emulator
Detailing/Vaccuming:
[info: this will re-index ur databases to make ur phone faster]
Open terminal emulator
Code:
su
{press enter}
Code:
vac
{press enter}
DONE!!
Engine Flush:
Open terminal emulator
Code:
su
{press enter}
Code:
flush
{press enter}
DONE!!!
Enjoy it... like a boss!
zeppelinrox said:
Updated April 10, 2012: - V6 SuperCharger Update 9 RC8.2
.................................... - Fixed - Bug when trying to apply calculated values automatically on rookies' first run - it would just loop back to menu
.................................... - Fixed - Bug regarding fix emissions option when resupercharging.
.................................... - Fixed - Bug regarding the installation marker in build.prop.unsuper.
.................................... - Improved - Has proper rounding of decimals instead of just truncating them. This was a royal pain in the ass.
.................................... - Enhanced - User prompts. No more confusion regarding the "applet not found" note
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Code a bit
Updated April 03, 2012: - V6 SuperCharger Update 9 RC8.1
.................................... - Fixed - Bug where the script appied all 0s for the minfrees
.................................... - Fixed - Bug where the script would crash when supercharging current minfrees that had a decimal value (ie. 32.532 MB was bad)
Updated April 02, 2012: - V6 SuperCharger Update 9 RC8
.................................... - Added - Fix Emissions Script! (Fix Permissions)
.................................... - Added - Option to run Fix Emissions on boot! (Does NOT slow down boot time!)
.................................... - Removed - Market links to BusyBox Installer (suddenly half assed busybox builds are running rampant ;p)
.................................... - Added - Link to my OP to get BusyBox builds compiled by wraithdu instead (So There! smali ass busybox builds!)
.................................... - Added - Automatic direction to use calculated values for Rookies! (after selecting Driver Options)
.................................... - Added - Support for a couple of more launchers
.................................... - Tweaked - Delay time in *97BulletProof_Apps - reduced to 30 seconds from 60 seconds. Shouldn't effect battery life since it still goes to deep sleep as it always does.
.................................... - Tweaked - Method by which /init.d/*97BulletProof_Apps is launched.
.................................... - Tweaked - Interface and user prompts.
.................................... - Changed - "Help File" to "Owner's Guide"
.................................... - Removed - Most DNS Tweaks (too many weird connection issues started happening)
.................................... - Tweaked - net.tcp.buffersize.* settings
.................................... - Changed - "Market" to "Google Play"
Click to expand...
Click to collapse
Downloads:
Mirrors are discoraged
V6 supercharger Updates (the latest are at the last of the post)
This thread will be updated with each update of of the original thread
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Shimizux said:
THIS IS EXACTLY WHAT IM WAITING FROM YOU ![Coz im read at Minicm9 thread you Talking About this] LOL
Thanks dude, [Thanks overlimit, Hit Soon ]
Click to expand...
Click to collapse
no prob. dude! enjoy!
Cannot download the attached .pdf file.
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
virajt said:
Cannot download the attached .pdf file.
Click to expand...
Click to collapse
Yep, Failed to Load PDF Document.
why it is in .pdf not .sh?
can you also upload the patch service.jar you used in nAa ICS.
Thanks
working on it... i can download the files btw!
and its in .sh.pdf
it is recognized as script anyway!
Shimizux said:
Dude,
IF, I change, flash a new rom [ICS ROM]
Do i need Upload my service.jar again?
Or i can use same service.jar file and Just Flash via CWM in New Costum ICS Rom ? Just in case.
Yep, Failed to Load PDF Document.
Click to expand...
Click to collapse
yes u hav to patch it again...
mediafire mirror updated!
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Shimizux said:
Dude,
I run Script with Terminal Emulator,
But it Always Need for me to choose Option [1-30]
Idk, What option should i choose,
Then yeah i choose option 30,
Some Command appear,
And "Buh Bye :")"
LOL! No Command for to Wipe Dalvik Cache. =.=
Click to expand...
Click to collapse
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
farhanzahinfj said:
that command is "super clean" on the list. "29"
and i've written the options recommended in OP with number!
Click to expand...
Click to collapse
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
to download just right click on the first link and save as option.
Trying
Shimizux said:
Then i Should Run Script Again,
Thanks.
Edit : Should i choose unleaded? or choose 3 of them?
Click to expand...
Click to collapse
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
farhanzahinfj said:
Only one will work... its like 3 options one answer... chose super unledded for more free memory... read the things the script is saying... u'll understand!
Sent from my E15i using XDA
Click to expand...
Click to collapse
Yezza ! i already choose Option 4
Works great !
Thanks Again Man
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
wakoko79 said:
I'm not on ICS, but I don't understand the playful options in the v6 supercharger and what each of them does (in layman please). If you have any link for help, please share it=). thanks
Click to expand...
Click to collapse
go to the original thread... link in the OP
Thread Updated! new script update9 RC8.... changelog added... fixes for superuser binary !!
Updated V6 U9RC8.1
I got syntax error on line 5555! In both 8.1 and 8 scripts.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
All Scripts in a unique AROMA Installer
Works on Samsung Galaxy S3 i9300 & i9305.
No root required, only custom recovery.
ROM Cleaner - Will give you the option to remove as much as possible without making your ROM unstable!
You will be able to install a secondary launcher with APEX or NOVA it's all up to you!
ROMCleaner app-list in a user friendly format
Backup Tool will make your flashing like "a walk in the park"
Follow our "Quick Guide" in the AROMA Installer under "How-to-use" and you will know when and how to run the scripts
ROM Cleaner Featured On XDA!!! Twice!
Also read these nice articles!
Video review by TheSmokingAndroid
XDA Front Page!
Pocketables!
XDA Front Page!
Evil-Dragon's Blog!
The Gadgeteer!
very nice, simple and fast way to delete stuff from your device
takes less then 5 seconds to delete all the listed applications and files in the list
Odex files will be automatically removed if belonging apk have been removed
no trash left behind as it would be if you delete files manually using Root Explorer
more free RAM for apps that you are actually using
users have reported better battery life and device speed improvements with ROM Cleaner
If you find this tool good, great, awesome or maybe even the best thing you ever tried
then please feel free to send us a beer, hit the "Thanks Button", leave some feedback and subscribe this thread
Important:
- If you get some kind of issue after flashing ROM Cleaner, re-flash the ROM and check if the issue still exists.
- Don't spam ROM development threads about issues caused by this script.
- Always report problems in this thread and we will most likely help you as fast as we can.
- Please always respect our work and be friendly and helpful to other members in this thread.
How to report a problem:
- Flash ROMCleaner_vX.X.zip in recovery
- In main menu and press "Log Collection".
- When done, reboot the device from "Advanced Power Menu".
- In "/external or internal sdcard/ROMCleaner" you will find RC_LogCollection.*.tar. Please upload this file together with a description of your problem.
With this log we can in - most cases - solve your problem within minutes!
If you ignore this simple instruction, you will most likely get no help from us!
ROM Cleaner v4.1
ROMCleaner_user.txt
CM-AOSP_user.txt
ROM Cleaner v3.0
ROMCleaner_user.txt
>Follow instructions in second post how to edit this to fit your demands...
Also make sure to use Notepad++ when editing ROMCleaner_user.txt in Windows.
Requirements: CWM Recovery or TWRP
Code:
[SIZE=2][COLOR=royalblue][B]ROM Cleaner v4.1 - 2014-02-11[/B][/COLOR]
-Common
*Updated ROMCleaner program to support KitKat ROMs (/system/priv-app)
*You can now save screen brightness settings
*Removed the number after sdcard in first screen
*Attempt to fix "free space" calculator
-ROM Cleaner (CM-AOSP)
*Corrected the issue where some users couldn't use this cleaning option.
-Additional Scripts
*Option to clear saved brightness settings
*Added a test script that will scan your packages.xml for unused app data and clear it.
-Launchers
*Updated all launchers
*Removed GO Launcher and Holo HD launcher
APEX and Nova are the options from now on.
_______________________________________________________________________________
[COLOR=royalblue][B]ROM Cleaner v4.0 - 2013-11-10[/B][/COLOR]
-[B]Common[/B]
*Updated AROMA binary to 2.70RC2 (stable)
*All script has been modified to work with the new ROM Cleaner standard.
AROMA Installer will now use variables for sdcard paths...
Thanks to this new method we can now handle 12 different
ways of mounting sdcard inside recovery.
But like always you external sdcard will used as long as you have one,
else internal sdcard will be used.
*Updated Busybox in the zip to ensure all commands will work as intended
*Plus a lot more stuff that will simplify things for us when updating ROM Cleaner.
-[B]ROM Cleaner[/B]
*New layout for ROMCleaner_user.txt (Please leave feedback)
*Added more apps to be removed
*Corrected odex files remover.
(if the app name contained "()" it resulted in syntax error
and stopped the script for removing odex files.)
*First screen will now show if needed partitions are mounted.
It will also let you know if your user.txt
can be found in your ROMCleaner folder.
*Added a "free space" calculator to show how many "MB" ROM Cleaner removed.
It will also show how many files and apps it removed.
*Added a checkbox to run "Log Collection" directly after ROM Cleaner
*Refined the status messages for ROM Cleaner, now it will print
"-ROM Cleaner was successful!" - All OK
"-There was nothing to remove by ROM Cleaner" - All OK,
(did you forget to flash a ROM?) ;)
"-ROM Cleaner Failed!" - This means the script didn't execute at all.
-[B]ROM Cleaner (CM10.x, AOSP, AOKP, GE)[/B]
*Added a new ROM Cleaner for CM10.x, AOSP, AOKP, GE ROMs
-[B]Additional Scripts[/B]
*Added checkboxes for settings restorer.
*Added a warning message if you use Setup Wizard remover before first boot.
*More info will be collected in "Log Collection"
-[B]Updated all launchers[/B]
_______________________________________________________________________________
[COLOR="royalblue"][B]ROM Cleaner v3.0 FINAL - 2013-03-09[/B][/COLOR]
-Common
*All scripts are heavily modified.
Now, ROM Cleaner will be able to use /external_sd, external_sdcard or /scard as source
External SDCARD will have first priority!
Thanks to everyone who helped us with testing especially [B]blueacidic[/B]
If no external sdcard can be found, internal sdcard will be used instead.
Thanks to [B]banccalif[/B] for reporting "Blueish" color hue and also for finding the optimal value.
*Slimmed zip size a bit.
Removed unused scripts and functions
Removed reboot/exit animation
-Backup Tool
*Corrected backup of accounts and home screen (Since Jelly Bean, user accounts was introduced)
*You will not be able to use Backup Tool if there is nothing to backup
*Added more logging code:
List all apps in /data/app before backup and after backup in backup dir
-ROM Cleaner
*Added a lot of new apps and changed description for some of them.
(It's highly recommended to remove your old ROMCleaner_user.txt and start all over)
Thanks to [B]stanley08[/B] for the amazing work on ROMCleaner.txt
*ROM Cleaner will now read from the ROMCleaner.log and based on the result,
print a status message in recovery. This method will be much more accurate.
And there's no more need to have the "test" line in the ROMCleaner_user.txt as before.
*If you have removed Setup Wizard and then perform a ROM update without wipe, the Setup Wizard will be removed by default.
*Changed the option in Launcher menu to avoid confusions.
*Added more logging code:
List all apps in /system and /data before and after ROM Cleaner
-Additional Scripts Menu
*If you try to run Settings Restorer before first boot you will get a warning
Same is with "Run all scripts in one GO!"
-Updated all launchers and renamed them so it will be easier for you to update the zip
Before: RC_Go.apk Now: com.gau.go.launcherex-1.apk
_________________________________________________________________________________
[COLOR="royalblue"][B]ROM Cleaner v2.0 - 2012-10-27[/B][/COLOR]
-[B]Common[/B]
*AROMA binary updated to v2.56 (no screen calibration values needed anymore)
*All scripts are heavily modified. Now everything will be much faster then before
*Added a new cool reboot animation by MarckX
-[B]Backup Tool[/B]
*New method too calculate required space before attempting to backup applications
(This resolves the problem with not enough space on sdcard)
-[B]ROM Cleaner[/B]
*Now ROM Cleaner will handle [B]odex[/B] files as well!
This means you can use ROM Cleaner even on [B]stock Samsung ROMs[/B] with the same clean result!
It will of course handle odexed custom ROMs as well
*Added some new apps and changed description for some of them
Google Talk is not removed by default anymore
-[B]Updated launchers[/B]
*APEX Launcher v1.2.5 > v1.3.2
*NOVA Launcher v1.2.2 > v1.3.2
*GO Launcher EX v3.13 > v3.17
*Holo Launcher HD v1.0.2 > v1.0.6
-Removed Holo Launcher
Thanks [B]F3nr1s[/B] and [B]DroidRevenge[/B] for testing!
_________________________________________________________________________________
[COLOR="royalblue"][B]ROM Cleaner v1.2 - 2012-09-02[/B][/COLOR]
-[B]ROM Cleaner[/B]
*Added many new apps (Thanks to kingsizeriz for the help with Omega App list)
ROM Cleaner should now be fully compatible with Omega ROMs as well! ;)
#CWMManager*.apk CWM Manager
#DirectConnect.apk ?????
#DirectShareManager.apk DirectShareManager
DSMForwarding.apk DSM
DSMLawmo.apk DSM
com.hwkrbbt.downloadall*.apk DownloadThemAll
#Exchange.apk Exchange
#Gmail.apk Gmail Application
#com.google.android.gm*.apk Gmail Application
MusicHub*.apk Music Hub
OfficialTOP40_installer.apk Official Top 40 Chart (http://tinyurl.com/99dghqv)
#Samsungservice.apk Security Settings?
#swype.apk Swype Keyboard
#com.swype.android*.apk Swype Keyboard
#GoogleCalendarSyncAdapter.apk Calendar Sync
#GoogleContactsSyncAdapter.apk Contacts
#SecFileShareClient.apk DirectShare
#SecFileShareServer.apk DirectShare
-[B]Backup Tool[/B]
*New menu which will let you to select what to backup
-[B]Updated launchers[/B]
*Holo Launcher v1.2.0 > v1.2.2
*Holo Launcher HD v1.0.0 > 1.0.2
_________________________________________________________________________________
[COLOR="royalblue"][B]ROM Cleaner v1.1 - 2012-08-22[/B][/COLOR]
-CWM Recovery v5.x.x.x and 6.x.x.x is now supported.
See download section
-[B]AROMA[/B]
*New AROMA v2.51 Binary
*Some other minor adjustments
*ROM Cleaner folders will be created at initial start of ROM Cleaner AROMA
-[B]ROM Cleaner[/B]
*Added some more apps based on JB leak (check ROMCleaner_user.txt for more info)
Tbh I can't remember :p
-[B]Updated launchers[/B]
*GO Launcher EX v3.12 > 3.13
_________________________________________________________________________________
[COLOR="royalblue"][B]Initial Release - 2012-08-10[/B][/COLOR]
- ROM Cleaner v1.0 for Samsung Galaxy S3
Keep in mind this is the initial release and our intention was to get you a
nice tool which will give you the option to customize your ROM.
Please give us feedback and we will try to make this tool even better!
Thanks to all beta tester who made this possible!
[/SIZE]
Please feel free to use our banner made by craacK
Thanks a lot for all donations
MarckX x2 | Tomi Mykrä x2 | craacK x1 | Anthony Hogan x1 | Pietrorlando Giordano x1 | Mastacheata x1
preacher65 x1 | PaulGiz x1 | avatar_ro x1 | verynuclear x1 | JagSem x1 | Clarifiante x1 | Rosete Ryan Kim x1
Xphoid x1 | rayford85 x1 | Simi007 x2 | z31s1g x1 | malybru x1 | HTC-Gunge x1 | Laurentius26 x1 | tossero x1
jeryx x1 | mrdey x1 | Imex99 x1 | rib king x1 | Gandicela x1 | Zelmer x1 | Perka x1
Thanks to all beta testers of ROM Cleaner v1.0
- noytexz
- gee2012
- MuertoKo
- mgf8384
- leventccc
MarckX for all the help with development and testing
Dude360 who made a great work building this tool with me.
craacK for all the help with the development and graphics
amarullz for the AROMA Installer
Madmaxx82 for his script skills and help making this one fly
Mike1986 & lukogriffioen for inspiration.
The rest of Team Revolution for supporting me.
Special thanks goes to Whiskey103 for hosting my files.
And of course to everyone who supports our work.
Guide & Info
Guide For ROM Cleaner and Additional Tools!
We did make an effort to make it as clear as possible on each AROMA screen. However it's always nice to know what the scripts do and when to use them...
So let's start!
Main Menu
In our main menu you will find:
* Backup Tool
* ROM Cleaner
--- ROM Cleaner
--- Skip Cleaning Step
* Additional Scripts
--- Settings Restorer
--- Setup Wizard Remover
--- Apps & Mods Installer
--- Run all scripts in one GO!
* Log Collection
* Advanced Power Menu
ROM Cleaner
Flashing procedure for pure ROM Cleaner users!
-*- Flash a ROM with full wipe
-*- Flash ROM Cleaner and press "ROM Cleaner"
-*- Pick "ROM Cleaner" or "CM-AOSP" script, then press Next
-*- Next menu is optional (should be pretty clear)
-*- Press Next again and wait until ROM Cleaner is done
-*- Press Reboot and use your phone like normal.
Skip cleaning step
If you use this option, nothing will be removed and you will still be able to restore your apps.
How To Edit Your Personal User.txt
Steps you need to do:
--- Windows users, download Notepad++ and install it.
--- Download "ROMCleaner_user.txt" or "CM-AOSP_user.txt" (from the download post)
--- Open the text file with Notepad++
--- Edit the file on your Android device: DroidEdit (Free)
In the text file you will find two columns with app names and a description in this guide we use AdobeReader.apk as an example.
To Remove a file with ROMCleaner
Code:
AdobeReader.apk Adobe Reader PDF reader
In the case above "AdobeReader.apk" will be removed.
To keep a file with ROMCleaner If you decide to keep it, add a "#" at the beginning of the line:
Code:
[COLOR=Red]#[/COLOR]AdobeReader.apk Adobe Reader PDF reader
Let's say we are done with the edits. To continue just complete next list:
--- Press the "X" in the upper right corner of the screen to save the changes.
--- Copy the file onto your external sdcard or internal sdcard. The file must be located in "/internal or external sdcard/ROMCleaner" folder. ( "/../ROMCleaner/ROMCleaner_user.txt" )
---If you don't have a ROMCleaner folder yet or are unsure about what's internal or external sdcard. Please flash ROM Cleaner zip in recovery.
By doing so, needed folders will be created. Reboot your device from "Advanced Power Menu"
Now ROM Cleaner script will always read that file!
Backup Tool
Will backup:
-*- Applications (Not app data)
-*- Accounts (Settings - Accounts)
-*- Bluetooth pairings
-*- TouchWiz launcher settings (and 3rd party widgets)
-*- Mail accounts (including Inbox)
-*- WiFi keys
Important Note: Use this before flashing a new ROM flash with full wipe
How to apply:
--- Flash ROM Cleaner AROMA and press "Backup Tool"
--- When done, press "Power Menu" and "Exit" .... or whatever you want...
Additional Scripts
Important Note: Use this menu only after a full boot!
* Settings Restorer > This script will restore data already saved with Backup Tool
* Setup Wizard Remover > This script will remove the Setup Wizard
* Apps & Mods Installer > This is a batch install script. Apps, mods, files in /*sdcard/ROMCleaner/SecondBoot will be installed when you use this script
* Run All scripts in one GO! > This is a batch install for all scripts in this menu.
Log Collection
Use this option when we request logs from you.
This script will collect all needed logs + "*user.txt" and create "RC_LogCollector.tar" in ROMCleaner folder. Upload this file and send it to us on XDA or Google Talk chatroom (add as contact to Google Talk [COLOR=black][email protected][/COLOR]
Advanced Power Menu
In this menu you will find the following options:
* Reboot your device
* Exit to Recovery
* Enable Mobile Network
Screenshots
Easy?
Yes? Good because this is and should be easy
Reserved...
FINALLY !!!!!!!!!
noytexz said:
FINALLY !!!!!!!!!
Click to expand...
Click to collapse
Yep, thanks to your last testing mate, we have finally a version that we are really happy to present.......
Thanx to all betatesters noytexz, gee2012, MuertoKo, mgf8384, leventccc. Without you guys this wouldn't have been possible at all!!!!!
Enjoy this release guys, just as much as we have creating/developing this!!!!!!!!!!!!
I think it would be very helpfull to post a video or a clear noob proof tutorial on how to use the Rom Cleaner as most users i think will have a hard time doing this properly especialy for the deletion of apps.
I`am not a noob i hope but i`am not 100% sure on how to use this Cleaner and i`am afraid you will be flooded with questions, issues and worse.
noytexz said:
FINALLY !!!!!!!!!
Click to expand...
Click to collapse
Yeah it took some time I hope it was wort waiting for
Thanks a lot for all your help!!
MarckX said:
Yep, thanks to your last testing mate, we have finally a version that we are really happy to present.......
Thanx to all betatesters noytexz, gee2012, MuertoKo, mgf8384, leventccc. Without you guys this hadn't been possible at all!!!!!
Enjoy this release guys, just as much as we have creating/developing this!!!!!!!!!!!!
Click to expand...
Click to collapse
+1
I hope Samsung Galaxy S3 users can give us a lot of feedback and help us to make the bloating part even smoother and better.
It's damn hard for us without a Samsung device
/Sense nerd
gee2012 said:
I think it would be very helpfull to post a video or a clear noob proof tutorial on how to use the Rom Cleaner as most users i think will have a hard time doing this properly especialy for the deletion of apps.
I`am not a noob i hope but i`am not 100% sure on how to use this Cleaner and i`am afraid you will be flooded with questions, issues and worse.
Click to expand...
Click to collapse
First of all Thank YOU for all the help!
And yes a video review or something would be crazy cool! Too bad I don't have a good camera... :/
I would really appreciate if someone could make a review!
As mentioned in the OP, right now we refer to the guide in aroma...
But I will soon post same guide in the 2nd post.
Steps you need to do:
* Windows users, download Notepad++
Then install it.
* Download "ROMCleaner_user.txt"
* Open the text file with Notepad++
In the text file you will find two columns
with app names and a description:
AdobeReader.apk Adobe Reader PDF reader
In the case above "AdobeReader.apk" will be removed.
To keep it, add a "#" at the beginning of the line:
#AdobeReader.apk Adobe Reader PDF reader
Let's say we are done with the edits.
Then press the "X" in the upper right corner of the
screen to save the changes.
Now copy the file onto your sdcard.
The file must be located in "/extSDcard/ROMCleaner" folder.
Now ROM Cleaner script will always read from that file!
Played around with the Cleaner script and gona try it now.
gee2012 said:
I think it would be very helpfull to post a video or a clear noob proof tutorial on how to use the Rom Cleaner as most users i think will have a hard time doing this properly especialy for the deletion of apps.
I`am not a noob i hope but i`am not 100% sure on how to use this Cleaner and i`am afraid you will be flooded with questions, issues and worse.
Click to expand...
Click to collapse
Sounds good
Is it enough to name the specific apk for deletion or do i also have to name the description of that apk
gee2012 said:
Is it enough to name the specific apk for deletion or do i also have to name the description of that apk
Click to expand...
Click to collapse
Only apk name is needed, the ROM Cleaner program will stop reading from the file after ".apk"
For files you need to write the full path like this:
"/system/app/appname.apk"
This is also mentioned in the ROMCleaner_user.txt
Description is only for the users to know what the app does...
Please if you find more apps, let us know...
This initial release is just to get the development up n running
gee2012 said:
I think it would be very helpfull to post a video or a clear noob proof tutorial on how to use the Rom Cleaner as most users i think will have a hard time doing this properly especialy for the deletion of apps.
I`am not a noob i hope but i`am not 100% sure on how to use this Cleaner and i`am afraid you will be flooded with questions, issues and worse.
Click to expand...
Click to collapse
gee2012 said:
Is it enough to name the specific apk for deletion or do i also have to name the description of that apk
Click to expand...
Click to collapse
APK name is enough
Guide updated!
Thanks a lot MarckX for the layout fixes
Sent from my HTC One X
Patrics83 said:
Guide updated!
Thanks a lot MarckX for the layout fixes
Sent from my HTC One X
Click to expand...
Click to collapse
NP mate! Anytime!
MarckX said:
NP mate! Anytime!
Click to expand...
Click to collapse
Good morning guys!
Anyone tried it yet?
It would be really nice to get some feedback
And I want to ask if anyone here have android-sdk installed with ddms plugin.
We would really like to have a screenshot from every aroma screen...
Thanks!
/Patric
I don't und
Sent from my GT-I9300 using xda premium
Patrics83 said:
Good morning guys!
Anyone tried it yet?
It would be really nice to get some feedback
And I want to ask if anyone here have android-sdk installed with ddms plugin.
We would really like to have a screenshot from every aroma screen...
Thanks!
/Patric
Click to expand...
Click to collapse
I tried it but it didn't read my user file in the ext sd folder so it just ran the default txt file. Now it could be my own mistake but I did use notepad++ to edit it and save it in the extsd / romcleaner folder as per instructions. But I'm using Touch CWM though, does that affect anything?
kastafela said:
I don't und
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
+1
I don't understand your post either...
lukesky said:
I tried it but it didn't read my user file in the ext sd folder so it just ran the default txt file. Now it could be my own mistake but I did use notepad++ to edit it and save it in the extsd / romcleaner folder as per instructions. But I'm using Touch CWM though, does that affect anything?
Click to expand...
Click to collapse
Hmm did you copy the file to /extSDcard/ROMCleaner ?
if you please run log collection in AROM ui and upload the file I will have a look... probably just a minor mistake
wow finally more devs in SGS III,
i know rom cleaner should be ran after fresh rom install, can we use it if we've had the rom already for a number of days?
Dear friends i found new scripts mod by @Exit_Only ...
http://forum.xda-developers.com/showthread.php?t=2411161
I'm Using this mod for many weeks and still no problem exists..
Wifi tether and direct also works under this mod..
Default Scripts | 10/03/2013 | Team Kernelizers | Operation Killjoy™ | RC7 | Insanity
OPERATION KILLJOY™
TEAM KERNELIZERS PRESENTS...
Operation Killjoy™ This tweak package takes your android device to a whole new level of awesomeness. Big thanks to all the developers involved.
THIS TWEAK PACKAGE IS 100% UNIVERSAL ON ALL DEVICES RUNNING ANDROID 4.0 OR HIGHER!!!
CREDITS:
Thanks to all my testers
First and foremost I want to thank team kernelizers for taking me inas a member of there team
@malybru (for the awesome banner)
@Ryuinferno(For the entro binary)
@LENAROX(For all your recommendations)
@Koush(For being an awesome coder)
@CyanogenMod(Do I need to say why)
@mw86(Being an amazing tester and debugger)
@idcrisis(For haveged binary for entropy)
@thomas.raines(Just a general thanks)
@jrummy16(Being an awesome coder)
@kejar31
@kobridge(Awesome scripter)
@zeppelinrox(Awesome scripter, most scripts on xda is because of your genius)
@Chainfire(Touchscreen script)
@ImbaWind(ICS ram flush boost script)
@GideonX(Awesome kernel dev
@RErick(Team k)
@decialman(Team k)
@castle_bravo(Team k)
@dsexton(Remount and readahead original dev)
@Juwe11(Original Minfree script)
@noobnl(GS3 maintainer for CM)
Any one else? If I forgot you please pm me and it will be fixed ASAP!!!
ATTENTION DEVELOPERS: I REALLY DO NOT WANT ANY DEVELOPER USING MY TWEAKS FOR ANYTHING. DUE TO UNFORTUNATE INCIDENTS ON XDA I RESPECTFULLY ASK NO DEVELOPER USE KILLJOY IN THERE PROJECT, TWEAK, MOD, KERNEL, ROM OR ANY OTHER TYPE PROJECT. PLEASE ADD A LINK TO YOUR OP BUT DO NOT INCLUDE IT IN YOUR ZIP FILE.
My Donations: https://www.paypal.com/cgi-bin/websc...=V6B74D49LB3SW
CURRENT DONATIONS RECEIVED:
Melanie (Unknown XDA Screen name) - $10.00 @azuma37 (XDA) - $5.00
Unknown name / Unknown XDA Username - $5.00 @iamsmallpang - $5.00 @RErick - $75.00 @jakereeves - $20.00 @Samurai - $5.00
Updated on 8/19/2013 @ 6:55am P.D.T
General Q & A Section:
Q.)How can I tell if this is actually working or not?
A.)Open Terminal Emulator and type this command...
Code:
su
killjoy
Q.)Help!!! Why is my phone bootlooping?
A.)I need more detailed information like what device you have, what version of android are you on, what recovery are you using? Better yet please get me a adb boot logcat as well.
Q.)Build.prop tweaks did not inject!!! Why?
A.)You don't have init.d support!!!
Q.)But my kernel supports init.d so why is my buildprop not getting injected?
A.)Well obviously you don't have init.d support cause if you did the build.prop would have been injected.
Q.)How can I test to see if I have init.d support?
A.)Flash this - http://www.mediafire.com/?97q4sh1wwcesois
Once you flash it then go into /data folder and look to see if you have a file called "okj_test.log", no log means no init.d support. END OF STORY!!!
Standard Disclaimer: Flash at your own risk. Myself nor XDA is responsible for any damage this thing may cause you. If your phone blows up after flashing this and you point the finger at me or team kernelizers I will laugh at you!!!
GENERAL WARNING: Do NOT I repeat DO NOT use ANY other tweaks with this package. If you choose to do so after reading this you do so AT YOUR OWN RISK. If you ask bout other tweaks in my thread YOU WILL BE IGNORED.
WHAT IS NEEDED:
1.) Root access (su binary required)
2.) Need to be on 4.0 ICS or higher
3.) Terminal Emulator app
4.) Enough space in your /system partition (10 mb available minimum)
If you do not meet these requirements then DO NOT USE IT!!!
5.) A kernel that has init.d support built into it or another init.d support method.
If you don't meet all these requirement DO NOT use this package!!!
1.) Make sure you meet the requirements above
2.) Download the latest version of Operation Killjoy™
3.) Boot into recovery (CWM recovery)
4.) Make a nandroid backup
5.) Flash inside CWM recovery
6.) Reboot...
7.) Profit...????
ABOUT THE TWEAKS:
1.) 2 init.d script
2.) Entropy Generator
Turn on entropy...
Code:
su
entro_on
Turn off entropy...
Code:
su
entro_off
Check available entropy levels type (YOU MUST HAVE ACTIVATED ENTROPY RESTORE BEFORE ATTEMPTING THIS)
Code:
su
entro
3.) Ext4 Tweaks
4.) Zero UI Lag
5.) Maxed out speed & Performance
6.) Disables most logging activities
7.) Lots of kernel tweaks (Disabled most kernel sleeps and Adjusted Linux values)
8.) Multiple VM & Net tweaks
9.) RAM booster binary (Recover lost ram on the go without rebooting)
Choose between moderate and aggressive ram boost...
Code:
su
boost
10.) Killjoy™ Binary (Exit_Only Exclusive)
Code:
su
killjoy
11.) Very light weight and fast
12.) CpuControl script that is 100% user tweaked via root explorer
If you are running ANY overclock apps then cputuner IS NOT for you!!! Cputuner will check to see if your running an OC app and will kick you out of cputuner if it detects said app!!!
I'll add more as I remember it :thumbup::beer:
08-18-13: First Release
08-19-13: Fixed All Derps
08-26-13: Completely Revamped CPU Tuner
Read ahead adjusted from 3072 to 2048 kb
Added new cat logging feature from tkmod (MERGED)
Added GPU Rendering from tkmod (MERGED)
Added buildprop script modified from tkmod (MERGED)
Redid entire init.d script from ground up and added samsung touchscreen mod (NOT APPICIBLE ON ALL SAMSUNG MODELS)
Numerous adjustments to code overall
08-29-13_test: Removed GPU render script
Removed build prop injector
Adjusted some values for better stability
09-02-13_official: Removed all test scripts
Fixed licensing errors
Fixed all errors
Removed cputuner to kill developer conflicts
Stable release
09-03-12_official: Fixed multiple bugs
No new features added
09-05-13_official: Made buildprop script busybox dependent
Fixed random rebooting
Fixed laginess
Fixed buildprop tweaks not installing on TWRP
Much better battery life and stability
09-08-13_RC2: Fixed bootloops happening because of read ahead scripts
Added testinitd script that will tell you whether you have init.d support, look in /data/killjoy/*
Adjusted a lot of stuff for better stability and battery life
Fixed logging issue from RC1
Official Release Canidiate v2
09-10-13_RC3: No more support for gingerbread devices
Must be running android 4.0 or higher or script will abort
Fixed lag issues
Killed logcating again
Adjusted build.prop script
Removed all test scripts
10-02-13_RC7: Added intellidemand governor to cputuner
Removed unstable commented out code
Updated to newest busybox
Fixed killjoy binary
Updated version number
OFFICIAL RELEASES
09-05-2013_official: http://www.mediafire.com/?41gw8d3tude71q3
OFFICIAL RELEASE CANIDIATES
10-02-2013_RC7: http://www.mediafire.com/?861h11n1767gu15
TEST RELEASES
No test releases yet!!!
WARNING: THESE ARE EXPERIMENTAL BUILDS ONLY. FLASH AT YOUR OWN RISK!!! Some of these builds will be super stable and others may not be stable at all. Keep in mind I do test every release so it will be at least semi stable.
KNOWN ISSUES & BUGS:
1.) Bootloops have happened on a few devices using TWRP Recoveries, Current workaround is use CWM Recovery.
2.) Build.prop injection tool not working on TWRP v2.6.0.0+ on multiple devices. Current workaround is use CWM Recovery.
XDA Script & Code Developer
Check out my github: http://github.com/ExitOnly
In support of Android Open Source Project (AOSP)
Current Device:
Samsung Galaxy S III (d2spr)
Current Setup:
CM10.1.1 Nightly w/ RNGD Entropy generator
Direct Injection Turbo Custom Tweaks
0-60 in less then 2 seconds
How to uninstall killjoy!!!
1.) Open terminal emulator
2.) Type these commands
Code:
su
uninstall
3.) Reboot your device
4.) Killjoy is gone
hello. would like to know how to make this script run on every boot?
zamurai x said:
hello. would like to know how to make this script run on every boot?
Click to expand...
Click to collapse
this script run over every boot automatically..
Note : I'm just sharing the work of the XDA Member DorianX.This mod was tested on stock deodexed and it was working fine.I'm not sure that it'll work on CM7 or not.Please test and report here.
:: Introduction ::..
XTweaks is a script pack something like others availables on XDA BUT with some of the logic from
SuperCharger V6 by zeppelinrox
(automatically set some values based on your total available RAM).
I've been using this scripts in my custom roms and it worked fine, so I decided to release it to public.
Click to expand...
Click to collapse
:: In the pack ::..
/data/tmp/* (This is a temporary folder that contain libncurses.so and sqlite3, from android 2.3.x to 4.4.x,
these files are required to run some scripts correctly).
/system/bin:
uninstall (This is an uninstaller, in case that you don't like the mod just go to terminal emulator and type:
su [enter], uninstall [enter] then XTweaks will get uninstalled and your phone will reboot by itself).
uninstallboot (This is an uninstaller for bootanimation only just go to terminal emulator and type:
su [enter], uninstallboot [enter]).
/system/etc/init.d:
00Buildprop (This script will add some values to build.prop on first boot then will be deleted by itself).
00SQlite (This add libncurses.so to /system/lib, sqlite3 to /system/xbin, then will be deleted by itself).
01Ksm (This enable "Kernel SamePage Merging" (KSM))
02Ram_Anim (Better memory management).
03Gov_Sched_Tweaks (This contain some Governor & I/O Scheduler tweaks).
04System_Tweaks (Another memory tweaks and kernel tweaks for better battery life).
05SDCard_Tweaks (This script change the read_ahead_kb value to 2048, faster speeds on SD card).
06NetSpeed_Security (You will get faster conections on WiFi/Mobile Network).
07Cleaner (This clear some unnecessary data and disables logcat) (if you need to get a logcat delete this script).
08Fix_Emissions (This script made it by zeppelinrox fix permissions to your apps and folders every boot preventing force closes).
09Detailing (This script optimize the database for your apps every boot also made it by zeppelinrox).
10Flush-O-Matic (This script clear the cached apps every hour so will get more true free RAM also made it by zeppelinrox).
/system/media:
bootanimation.zip (Customized bootanimation based on Nexus 7's 4.4).
/system/xbin:
busybox (Is the latest busybox by Stericson (1.21.1) needed to run all the scripts, root, etc.).
/tools:
backup.sh (This is a temporary script that makes a backup of your ini.d folder and your current bootanimation (if your ROM have a regular /system/media/bootanimation.zip)).
busybox (This is a temporary busybox to get run the installer).
Click to expand...
Click to collapse
..:: Requirements ::..
- Rooted phone.
- Android 2.3+.
- Kernel/ROM with init.d support.
- 10mb free in system.
- Custom recovery.
Click to expand...
Click to collapse
..:: Installation ::..
- Download the latest version of this mod.
- Copy it on your sd card.
- Go to recovery mode.
- Flash it.
- Reboot.
- Enjoy!
..:: F.A.Q. ::..
Q. How can I uninstall this mod?
A.Go to terminal and type this :
su
uninstall
Q. How can I uninstall the integrated bootanimation?
A.Go to terminal and type this :
su
uninstallboot
Q. Is this mod compatible with other mods?
A. Maybe with Crossbreeder but you need to test it, first install this mod then install the one you want to try.
Click to expand...
Click to collapse
..:: Downloads ::.. : http://www.mediafire.com/download/a3i6wxh3rnhgng6/XTweaks-1.0.1.zip
Original Thread : http://forum.xda-developers.com/showthread.php?t=2574443
Credits :
DorianX
Click to expand...
Click to collapse
No one pressed the Thanks button!!
Hi mates
@torique hier you have your requested patches... (I have no mirrors, so I'll post the files hier )
Service.jar files modded to get 100% Supercharged on Kitkat
The modded services.jar file allows you to use the Zeppelinrox's Supercharged Script
What's it do?
What's it do?
It makes your phone FAST... super snappy with better multitasking!
It rearranges and fixes the OOM Groupings and Priorites and lowmemorykiller values.
So basically, it's a COMPLETE MEMORY MANAGEMENT FIX!
It's the ONLY one of it's kind
NO LAUNCHER REDRAWS, faster than ever, multitasking is better... why?
Because it works with the lowmemorykiller and letting it work the way it's meant to work.
Also, because of the rearrangement, it works the same on all roms!
The problem with using minfree tweakers like AMM or AKMO is that it doesn't work the same on all roms.
Secondary apps may be in slot 3 on some roms but in slot 5 in others!
That's why you hear people comment "I tried AKMO but it didn't do anything..."
Most likely it didn't do anything because the apps weren't sitting where they were expected to be.
So fasten your seat belts and enjoy the ride!
Click to expand...
Click to collapse
***Taken from the Supercharged Original Thread
Changelog:
Test patches
Credits:
Special thanks to zeppelinrox
torique
ATTENTION
ATTENTION
The script was tested on Galaxy Ace (armv6 device) running CM11. The script seems to work fine, but I've experienced a black screen loop with all the tweaks enabled after rebooting, so be careful mates when you use the Supercharged Script.
Do a BACKUP before doing nothing and getting the 100% Supercharged
HOW TO EXECUTE THE SUPERCHARGED SCRIPT
SUPERCHARGED SCRIPT
Get the Script
Requirements:
- Terminal Emulator
- Supercharged Script
Instructions:
1. Download Supercharged Script ile
2. Rename it as "1.sh" (e.g it's just to go faster )
3. Open the Terminal Emulator and type the following steps.
Code:
su
cd sdcard/download
sh 1.sh
4. Follow the script steps
*** cd sdcard/download is just an example, it could be cd sdcard or the place that contains the script, the real goal is to navigate through the folders and to find the place where the script is located
Patches with 2 options
- Services.jar
- Flashable zip
Instructions for flaschable zip:
1. Download the correct file.
2. Boot into recovery.
3. Install from sdcard.
4. Flash it.
5. WIPE CACHE AND DALVIK-CACHE.
6. Done! Reboot system now
If you want to include it in your build (CM11 based), just rename the file as "services.jar", open the rom's file and replace it in /system/frameworks/ or you can install it manually setting the correct permissions, reboot into CWM and do wipe cache partiotion and wipe dalvik-cache
Code:
____________________
| |
|[B][SIZE="3"] VTR_services.jar[/SIZE][/B] ||
| |
| |
| [B][COLOR="Red"] R W E[/COLOR][/B] |
| [B][COLOR="blue"]Owner[/COLOR][/B][COLOR="White"]![/COLOR] x-x-- |
| [B][COLOR="blue"]Group [/COLOR][/B]x---- |
| [B][COLOR="blue"]Others [/COLOR][/B]x---- |
| |
| |
| [B]AGREE [/B]| [B]CANCEL [/B]|
|____________________|
CM11
Reserved4
Reserved5