So I read around that the hack for the Samsung Galaxy Note I717 to get the LTE 1700mhz frequency working on T-Mobile (U.S.) and Wind/Mobi (Canada) is available.
My question is, would this or any hacks work on any LTE1700mhz band phone to work on AWS carriers running on HSPA mode?
Like the HTC One X AT&T version for example..
3G Network HSDPA 850 / 1900 / 2100
4G Network LTE 700 MHz Class 17 / 1700 / 2100
which is the same specs as the Note in terms of bands it uses...
Anyone knows??
MT4G running SyNthetic_aospX BR7
OK 700 Mhz band is listed but not band 12 on 700 mhz.
However we have seen 1700 WCDMA ( 3G H H+) show up in the service menu even though not listed in Specs.
So wondering IF the Band 12 is available on the listed 700 Band
OR if one that can be enabled by some of you clever Devs here ?
Thanks.
I got a V19 phone from china with Android 5.0. I believe it is a rooted phone, I've seen some of those features. It came in a box that says Android. I have no idea of the manufacturer.
Problem: I cant get the data connection (tmobile, wifi works fine) to get better than the edge network, 2G. I've learned that T-Mobile requires these bands:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2
Inside the battery area the phone lists :
GSM 850/900/1800/1900mhz
WCDMA 850/2100mhz (HA)
When I got to engineering mode, I can see other bands that are greyed out.
So my question is this. Is it possible to slick this phone and install software, etc, that allows the bands I need? Or are 'Bands" hard coded into the hardware of the phone? Easier to just buy another phone with correct bands? Advice or links?
Thanks,
Gary B.
my v19 from china same as yours bro.. it says android 10.0 but its features says 6.0ver
Hi, last week I was given a Moto G3 XT 1541 from Spain. The problem is that it doesn't connect to argentinian carrier's 3g or 4g bands, it only works on 2g. A friend told me that I could work it out flashing the firmware of another model like XT1540 which works perfectly on 3g and 4g. Is it a firmware block? Can I solve it flashing another model's firmware? If I flash it, will my phone work or it will be a stone? Thank you ver much.
Yes, you can.
Moto G 3rd generation does not have capability of 2300 MHz bandwidth.
Requirements for a4G
1. A handset that supports 2300Mhz.
2. A 3G plan.
3. USIM (they provide free upgrade)
4. 4G network coverage
I think even HSPA or HSPA+ might not work for me on this phone. I am using a T Mobile family plan here, and comparing th bands given on the website:
"4G (HSPA+)
With 4G, theoretical maximum download speeds range from 21 Mbps up to 42 Mbps. You can take advantage of incredibly fast download speeds, and even use voice and data services at the same time.
Frequencies: Band 2 (1900 MHz), Band 4 (1700/2100 MHz)
3G (HSPA)
With 3G, theoretical maximum download of 14 Mbps. With 3G, you can use voice and data services simultaneously.
Frequencies: Band 4 (1700/2100 MHz)"
"Moto G (XT1550)
LTE (1, 3, 7, 8, 28,40) UMTS/HSPA+ (900, 2100, 850 MHz)
GSM/GPRS/EDGE (850, 900, 1800, 1900 MHz)"
It seems that the uplink is unsupported by my phone and so the phone is unable to use the HSPA/HSPA+ bands. I think the only way to use it is to unlock the 1700 MHz band on my phone.
XT1541: GSM/GPRS/EDGE: 850, 900, 1800, 1900 - UMTS/HSPA+: 900, 2100 - LTE: B1 (2100), B3 (1800), B7 (2600), B8 (900), B20 (800)
Argentina UMS/HSPA+ works on 850 and 1900.
This phone will only get 2g where you are. Flashing another firmware will not fix this.
I have a new unlocked S9+ China (SM-G9650/DS, Qualcomm Snapdragon 845), and I'm trying to figure out if it is fully supported by T-Mobile in the US. I've done some Googling on this, but I'm not sure I understand the results. The supported band specs for the phone, and the T-Mobile frequencies used, are below. Can someone confirm or comment whether the phone is fully supported, or if not what's missing? Thx, Gus
S9+ China SM-G9650/DS Specs:
GSM Mhz band: Quad-Band 850/900/1800/1900
2G network: CDMA 800, GSM 850/900/1800/1900
3G network: CDMA2000 1xEV-DO
TD-SCDMA 1900/2000
UMTS 850/900/1700/1900/2100
4G network: LTE Cat18 700/800/850/900/1700/1800/1900/2100/2300/2600
(Bands 1,2,3,4,5,7,8,12,18,19,20,28,29,30)
TD-LTE 1900/2300/2500/2600 (Bands 38,39,40,41)
Data network: GPRS, EDGE, CDMA2000 EV-DO Rev 0, CDMA2000 EV-DO Rev A, TD-SCDMA, UMTS, TD-HSDPA, HSDPA, HSUPA, HSPA+, TD-LTE, LTE, LTE-A
T-Mobile Frequencies:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2
gus_zernial said:
I have a new unlocked S9+ China (SM-G9650/DS, Qualcomm Snapdragon 845), and I'm trying to figure out if it is fully supported by T-Mobile in the US. I've done some Googling on this, but I'm not sure I understand the results. The supported band specs for the phone, and the T-Mobile frequencies used, are below. Can someone confirm or comment whether the phone is fully supported, or if not what's missing? Thx, Gus
S9+ China SM-G9650/DS Specs:
GSM Mhz band: Quad-Band 850/900/1800/1900
2G network: CDMA 800, GSM 850/900/1800/1900
3G network: CDMA2000 1xEV-DO
TD-SCDMA 1900/2000
UMTS 850/900/1700/1900/2100
4G network: LTE Cat18 700/800/850/900/1700/1800/1900/2100/2300/2600
(Bands 1,2,3,4,5,7,8,12,18,19,20,28,29,30)
TD-LTE 1900/2300/2500/2600 (Bands 38,39,40,41)
Data network: GPRS, EDGE, CDMA2000 EV-DO Rev 0, CDMA2000 EV-DO Rev A, TD-SCDMA, UMTS, TD-HSDPA, HSDPA, HSUPA, HSPA+, TD-LTE, LTE, LTE-A
T-Mobile Frequencies:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2[/QUOTE
It will work on T-Mobile frequencies but you won't get Wifi Calling or voLTE. The stock CSC is TGY - Hong Kong, T-Mobile is TMB. I haven't found any way to change the CSC even with custom ROM, but assuming one became available you would trip Knox and lose Samsung Pay, Samsung Health, Secure Folder, OTA Updates and Factory Warranty. Some members have posted in regards to changing the CSC Code in the link below but I'm not certain it's working out. Good luck!
https://forum.xda-developers.com/galaxy-s9-plus/how-to/qualcomm-sm-g9650-hong-kong-china-t3764542
Click to expand...
Click to collapse
baring any unforeseen hidden stuff, you should be good to go for Tmobile...Minus the new Band 71 on the 600mhz spectrum. Honestly, unless you live in the area that will get this deployment, this shouldn't be of concern. As long as you can use Band 2/4/12, you will be ok with Tmobile.
I almost went with this route as well since I wanted to get a Snapdragon version with larger storage size. But I chickened out because I've been reading people having bad signals/not having full LTE speeds with their imported S9+ on TMOUS.
Good luck and let us know!
I used CT Excel Americas (T-mobile mvno) and it worked on CHC firmware. But I forgot to test volte etc.
kevinfan1990 said:
I used CT Excel Americas (T-mobile mvno) and it worked on CHC firmware. But I forgot to test volte etc.
Click to expand...
Click to collapse
Please post steps for this. I would like to get VoLTE and Wifi calling