OK 700 Mhz band is listed but not band 12 on 700 mhz.
However we have seen 1700 WCDMA ( 3G H H+) show up in the service menu even though not listed in Specs.
So wondering IF the Band 12 is available on the listed 700 Band
OR if one that can be enabled by some of you clever Devs here ?
Thanks.
Related
So I read around that the hack for the Samsung Galaxy Note I717 to get the LTE 1700mhz frequency working on T-Mobile (U.S.) and Wind/Mobi (Canada) is available.
My question is, would this or any hacks work on any LTE1700mhz band phone to work on AWS carriers running on HSPA mode?
Like the HTC One X AT&T version for example..
3G Network HSDPA 850 / 1900 / 2100
4G Network LTE 700 MHz Class 17 / 1700 / 2100
which is the same specs as the Note in terms of bands it uses...
Anyone knows??
MT4G running SyNthetic_aospX BR7
Hi,
All Guys in Singapore specially pay heed
I bought this lovely phone to be able to enjoy quad core for one and LTE data access. It seems that when I try to connect to the 4G LTE on Starhub (in Singapore), I only get 4G, not the LTE speeds.
Please correct me if I am wrong, that the e970 has 1700 and 2100 band for the LTE, while Singapore only has 1800 and 2600 bands available.
Is there any possibility of enabling 1800 and 2600 bands?
The local variant is the E975, can I flash the stock e975 firmware to the e970 without adverse effects?
milind
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1900 / 2100
4G Network LTE 700 MHz Class 17 / 1700 / 2100
You can use 2G, not sure what the 3g band is in Singapore.
Sent from my Optimus G
My quick search shows Singapore uses 2100 for 3g, so the phone will support it. However, you cannot add or enable new frequencies. The hardware does not support them unfortunately. Your local LTE is not compatible with the E970
Ace42 said:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1900 / 2100
4G Network LTE 700 MHz Class 17 / 1700 / 2100
You can use 2G, not sure what the 3g band is in Singapore.
Sent from my Optimus G
Click to expand...
Click to collapse
You can use 3G/HSPA+, I was there last week and I was getting 5-6 Mbps using SingTel prepaid.
EDIT- No LTE, sadly. But 3G was enough for anything I'd do on my phone.
H+ in singapore
stewartsoda said:
You can use 3G/HSPA+, I was there last week and I was getting 5-6 Mbps using SingTel prepaid.
EDIT- No LTE, sadly. But 3G was enough for anything I'd do on my phone.
Click to expand...
Click to collapse
HI,
yes the HSPAP works quite well. Im on the StarHub network, I also get a decent data rate. But LTE is LTE, it would have been nice to be able to coax the E970 somehow into those bands.
milind
bad that and convert it to other frequencies cannot be
Anyone know what LTE band or bands the Nexus 9 operates on? I need to know where it can be used country wise as band choice varies wildly.
I want to know this too.
Is there anybody who know what lte band support on Nexus 9 LTE version?
I found it.
http://www.htc.com/us/tablets/nexus-9/
Network
2G/2.5G - GSM/GPRS/EDGE:
850/900/1800/1900 MHz
3G - WCDMA:
850/900/AWS/1900/2100 MHz with HSPA+ up to 42 Mbps
4G - LTE:
Bands 1,2,3,4,5,7,8,20
seems very good.
I got a V19 phone from china with Android 5.0. I believe it is a rooted phone, I've seen some of those features. It came in a box that says Android. I have no idea of the manufacturer.
Problem: I cant get the data connection (tmobile, wifi works fine) to get better than the edge network, 2G. I've learned that T-Mobile requires these bands:
LTE Frequencies:
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
Lower 700 MHz band 12 (in development) / in service in selected areas
3G/4G Frequencies (WCDMA):
1700 MHz & 2100 MHz AWS band 4
1900 MHz PCS band 2 (in refarmed areas)
2G Frequencies (GSM/GPRS/EDGE):
1900 MHz PCS band 2
Inside the battery area the phone lists :
GSM 850/900/1800/1900mhz
WCDMA 850/2100mhz (HA)
When I got to engineering mode, I can see other bands that are greyed out.
So my question is this. Is it possible to slick this phone and install software, etc, that allows the bands I need? Or are 'Bands" hard coded into the hardware of the phone? Easier to just buy another phone with correct bands? Advice or links?
Thanks,
Gary B.
my v19 from china same as yours bro.. it says android 10.0 but its features says 6.0ver
Hi, last week I was given a Moto G3 XT 1541 from Spain. The problem is that it doesn't connect to argentinian carrier's 3g or 4g bands, it only works on 2g. A friend told me that I could work it out flashing the firmware of another model like XT1540 which works perfectly on 3g and 4g. Is it a firmware block? Can I solve it flashing another model's firmware? If I flash it, will my phone work or it will be a stone? Thank you ver much.
Yes, you can.
Moto G 3rd generation does not have capability of 2300 MHz bandwidth.
Requirements for a4G
1. A handset that supports 2300Mhz.
2. A 3G plan.
3. USIM (they provide free upgrade)
4. 4G network coverage
I think even HSPA or HSPA+ might not work for me on this phone. I am using a T Mobile family plan here, and comparing th bands given on the website:
"4G (HSPA+)
With 4G, theoretical maximum download speeds range from 21 Mbps up to 42 Mbps. You can take advantage of incredibly fast download speeds, and even use voice and data services at the same time.
Frequencies: Band 2 (1900 MHz), Band 4 (1700/2100 MHz)
3G (HSPA)
With 3G, theoretical maximum download of 14 Mbps. With 3G, you can use voice and data services simultaneously.
Frequencies: Band 4 (1700/2100 MHz)"
"Moto G (XT1550)
LTE (1, 3, 7, 8, 28,40) UMTS/HSPA+ (900, 2100, 850 MHz)
GSM/GPRS/EDGE (850, 900, 1800, 1900 MHz)"
It seems that the uplink is unsupported by my phone and so the phone is unable to use the HSPA/HSPA+ bands. I think the only way to use it is to unlock the 1700 MHz band on my phone.
XT1541: GSM/GPRS/EDGE: 850, 900, 1800, 1900 - UMTS/HSPA+: 900, 2100 - LTE: B1 (2100), B3 (1800), B7 (2600), B8 (900), B20 (800)
Argentina UMS/HSPA+ works on 850 and 1900.
This phone will only get 2g where you are. Flashing another firmware will not fix this.