Just bought an LG G3 to flash to my Boost account and I've got phone/text working but I can not get 3G to work. I've done about 5 phones in the past so this is nothing new to me. The problem I'm running into is QPST and other programs aren't actually writing my data settings to the phone. In QPST I keep receiving an error saying it failed to write.
So, does anyone have any suggestions on any other programs I could use to write the data or what's causing this problem? Does the S3 had a 16 digit password like other phones?
I was able to do it. IT has been soem time but I remember using a guide for the G2 from here to get the 16 digit password and I used DFS to do the programing. If i find where I got the password from Il post a link here.
EDIT: heres the link for the passwword. http://forum.xda-developers.com/showthread.php?t=2521276
Related
my internet sharing isnt working
It worked fine with my first mogul but
after I went to sprint and got a replacement phone,
I tried to use the internet connection sharing. I press on connect
and the error that keeps coming up is
Error code 67 registration failure your pcs vision username and or password may be incorrect
why does this keep coming up? did the person at the sprint store set up my phone correctly?
what could I do to fix this problem??
the phone by itself goes on the internet perfectly without any problem
What ROM do you have on it?
Have you run IOTA?
I had the same issue so many times I learned how to reset all the internet connections myself, but you need your unlock code to do that. You can call sprint and ask for the code.
its the sprint rom that came with the phone 3.56
can you please help me and tell me what to do and how to do this myself ?
it will be very helpful thanks...
Hi!
I have a Verizon Samsung Fascinate (SCH-i500) currently working with PagePlus Talk and Text. I bought it from somebody, so I'm a second owner. Mostly I use wi-fi, but sometimes I need to use data/mms. I went to a PagePlus dealer and asked about enable data/mms, he said I can't use it because PagePlus dose not allow data/mms on smartphone. I searched about solution more than a week, but I couldn't find it. Can you help me with your magic hands? I have QPST program. If you can, please give me a step by step instruction.
Thanks!!!
I just activated a Fascinate with Page Plus today, and I seem to be having the same issue with no data or mms working. Calls and text seems to be working fine though. I bought the phone off ebay, so it was previously used with Verizon service. I've searched for the past week on this as well, and I can't seem to find any instructions on what to do, and Page Plus CS is pretty useless. Any help would greatly be appreciated, thanks in advance!
I don't really know how to fix it but maybe I.have some information that can send you in the right direction.
First, there was a thread where people got the fascinate working on either US.cellular or cricket. That may help you get some information.
Second im pretty sure they had to use qpst to change the settings.
Third I think the problem had to do with the prl information in the phone.
Sent from my SCH-I500 using XDA Premium App
Hey thanks for your reply. I looked into people flashing to cricket and there isn't much information on that either. Plus I can't seem to find any apn settings or anything like that for Page Plus. I've prob spent another 6 hrs today on this with no luck. If anyone has any info about getting data and mms working it will be a huge help. Pretty much everything I find online are people asking what I'm asking with no responses.
For data, you require qpst build 215. Flash the correct ppp settings for your carrier. Any other build will yield you nothing. As far as mms, use apn back up to flash the correct settings.
Hey I really appreciate you giving me an idea with qpst. Unfortunately I'm still stuck at one part, so I'm hoping you might be able to clear that up for me. I downloaded qpst 2.7 build 215, I got my phone in dial up mode from **33284, set the COM port to 1, so I have the QPST service program recognizing my device, and I'm at the PPP Config tab. Only problem is I have no idea what values to enter for anything, I see 3 tabs "Rm", "Um", and "AN" and in each one there are spaces for values of "LCP", "IPCP", "IPCPv6". Then there are spaces for user id, password, tethered NAI, retries, timeout, primary dns, secondary dns, optimized dormant handoff, 1xEVDO->1x. So I really don't know where to begin. I've tried searching all over to see what I'm supposed to set if I want my phone working with Page Plus. Can't seem to find any clear answers. Anyways sorry for the long message. Hopefully you can clear some of this up for me. Again I really appreciate your help, thanks!
I just activated a fascinate on pp as well. Data works for me (haven't tried mms). Have you tried calling pp and verifying that data is enabled on the account? Also maybe an esn reset. The folks over at howard forums are pretty helpful too. Good luck!
Sent from my SCH-I500 using XDA App
Wow, sounds like you got lucky! I did call Page Plus to verify if data was enabled and it is. I guess I should call back and try the esn reset your suggesting. But as of right now I still don't have the data or mms working
rogerski1 said:
I just activated a fascinate on pp as well. Data works for me (haven't tried mms). Have you tried calling pp and verifying that data is enabled on the account? Also maybe an esn reset. The folks over at howard forums are pretty helpful too. Good luck!
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Also when you log into your Page Plus account is your phone listed as generic? Mine is listed as generic, and with Phone features as SMS and voicemail. No mention about data on the phone. Even though my plan has 100 mb of data. I do see 100 mb of data listed under the plan on the right though.
I'm getting a fascinate off ebay.
how to use it on pageplus?
$.99c activation service on ebay will activate the phone since it is Verizon phone?
or i have to use qpst?? software?
You guys think my data and mss might not be working due to the fact that I'm running a custom rom and 2.2.1? As opposed to the stock 2.1? I want to get some feedback, before I odin back to 2.1 to test it out, thanks.
I got exactly the same issue.
I know for a fact that the phone is not a problem, because it was working for last half a year with pageplus. I ported a phone number from google voice today and lo and behold, data not working anymore. I tried calling pageplus, they reset data service twice, didn't help. I also tried re-programming by calling numbers from here: http://pageplusdealer.com/PagePlus/catalog/ActivationInstructions.php . I tried reflashing firmware, kernel, and radio, and nothing. It isn't even trying to data connect.
Anyone knows what to do with QPST to try helping the issue?
*EDIT*: I figured it out. QPST showed wrong NAI. Somehow instead of [email protected], it was some completely bogus number with completely bogus domain name. Anyway, I reset it to correct value, and it works fine now. I have absolutely no idea why was it reprogrammed, and why *22890 didn't put it back.
Use (Page Plus Cellular) i have a Galaxy S Fascinate (Verizon) and data / mms work perfectly, I'm on $29.95 Plan 1200 min / 3000 text, 100 mb Data per month.
I have a 3vo flashed to metro and I'm having trouble getting it to connect to 3g. The place that flashed the phone did not repair the meid. But I'm not sure if they wrote a esn from a non 3g phone to mine when they houdinied it. When I read the nv items on qxdm the esn shows up but the checksum and eveywhere else is zeroed out. Di those need to match? Anyone familiar with this process please help I'm in a 3g area but cannot connect. And this 1x ia killing me. I just paid my bill and don't wanna go to boost if I don't have to. Thanks in advance
Shot from my Shoot3Rvo
Disclaimer, I'm not an expert and I have only done a handful of clones and conversions to other networks.
First does your phone make calls? If so meid/esn are ok. Since you have 1x that also shows your meid/esn are ok too.
You don't have 3G because they didn't enter the server information correctly or your HA Password or AAA pasword are wrong. Take the phone back and have them figure it out. I've always done it with a donor phone that worked completely on the network and I just copied over all the information with qpst or cdmaws to the new phone. Newer phones hide the HA and AAA passwords so using qpst/cdmaws cant retrieve them. If the donor phone is an android phone your can get the passwords using adb, logcat and go into ##data# and access the HA/aaa fields and the go back and search logcat for the passwords.
Start searching forums for retrieving HA/AAA passwords for the EVO 3D and also general activating on Boost/Cricket process. The process would be the same except with Metro you may not have to repair meid because their is houdini to insert the meid into the database. Find out what the programming settings are supposed to be and check them with qpst/service programming or go into ##data# check them there.
Good luck and happy reading.
Sweet thanks the the best feedback that I have recieved. The way the guides show is that for metro that the ha and spi are supposed to be the msl code but I have tried that among others. So maybe I need to be using the msl code that was used for the phone they houdini with. I don't know to much about using qxdm but the areas I do scan for meid and esn are all zeros or 0xFFFFFFF is that normal.
Shot from my Shoot3Rvo
Is there anyway to flash the Droid Razr to metro pcs and if so can someone provide me with a link? If I'm posting in the wrong place just let me know.
i'm thinking you may need more than just flashing for that.
Do you know what I might need then? This verizon bill is killing me. I know people have successfully flashed the razr to Cricket. I mean I know I'm gonna need to root kit which isn't a problem I've done that kind of thing plenty of times and I've just been procrastinating on doing it on my Razr for some reason.
i know how to flash it to metropcs just cant get it into the metropcs system so if someone can help me as far as getting it into the system i can definately help them on the falshing part
houdini
you just have to houdini the phone, tha'll will get the phone in their system
candel said:
you just have to houdini the phone, tha'll will get the phone in their system
Click to expand...
Click to collapse
ive tried running it through houdini and it isnt on their compatible phones list
Flashed on cricket
Noodlez916 said:
Is there anyway to flash the Droid Razr to metro pcs and if so can someone provide me with a link? If I'm posting in the wrong place just let me know.
Click to expand...
Click to collapse
I found this
http://www.cricketusers.com/verizon...-cricket-wireless-talk-text-mms-internet.html
At the moment this is a placeholder for notes. The tutorial might have to be finished by someone who has more time than me to work on this device. Mine is on Verizon now. I will probably poke at it a little bit more when I get home and back to a normal schedule, but throughout December, it's going to be hectic for me. I'm going to try and add pictures so someone will have some knowledge going into this where I had none. If someone can get a hold of a Bionic tutorial, this might be similar.
Currently talk and text works but 3g data drops out. It works when it's connected but wants to cycle off and on A LOT.
As a good rule of thumb, always try to backup your settings before modifying them.
DIAG MODE
Verizon Droid RAZR Diagnostic Mode How To
NOTES (semi based off Thunderbolt tutorial)
CDMA WS 3.5 or later will give you more options and another method of writing data profiles to the device.
QPST does work HOWEVER you cannot read and then write the original settings to the phone (after modification of course). You have to start fresh and write ONLY.
CDMA AUTO (PRL) MODE (info from RLockwich)
Go into *#*#4636#*#* - Went into phone information (Set to CDMA Only PRL, DNS check allowed, Query CFU enabled).
QPST
Add the port for the device if required under QPST configuration. It's going to be the DIAG port. Just check device manager to see what port that is.
Use the Service Programming application under the QPST folder to access the phone. Connect to it but don't read.
Now follow this tutorial to write the proper information:
http://www.cricketusers.com/flashing...s-cricket.html
Write to the phone. Reboot it once all the writing is done and catch the boot to put it back in DIAG mode. If you don't it's no big deal, but you will have to power it down and get it back in DIAG mode before continuing.
CDMA WS
Open up CDMA WS and connect to the port with the RAZR. Go to the security tab and send the SPC 000000. Then go to the memory tab and send the DROID NV items which can be found at whiterabbit.org. It should write the NV items and fix the data.
UPDATE: The following might be required
Go to the "Other" tab and navigate to "R-UIM" then click read.
Change it to "NV Only" and write to phone. It should say Successful
Close out CDMA WS and reboot the phone.
Phone Settings (info from RLockwich)
Go into the ##PROGRAM select option 14 for LTE I turned off LTE bppanic, LTE Movement detection, and disabled Class 1,2,2 APNS
Additional Instructions (info from RLockwich)
Just went through all the settings again, I hope everyone can have as much luck as I just did. I was thinking, and I remember seeing the end of the thunderbolt tutorial says the last step is to remove the 4G LTE microSIM. I had tried that before early on when I first flashed it, but when I removed the card, it showed No Sim, no network connection and a SIM symbol with a exclamation point. I just tried it again a hour ago...Pulled the SIM, showed no network and then I rebooted the phone... FIVE times on and off all with immediate and STABLE 3G at 10 minutes a time between rebooting. FIXED. Done messing with it.
UPDATE 12/19 - After this last post it's been 4 days since we cracked the 3G cycling issue, and my phone is working excellent! I'm very glad I was able to be a part of this and get credit work any work I put into this.
Dina's Notes:
Got everything working THANKS to Chris and RLokwich! Oh, and for those of you that are not yet successful with this flash, just re-read the entire thread. Everything you need is HERE!
It was not all smooth in the beginning.
Insights:
1) No need for BP tools. If your phone is on the homescreen, just connect it to the cable, choose PC mode and set up the port in HW.
2) Mine took like 5 master resets before 3g showed up. So in case you are pulling your hair as to why 3g not showing up, master reset the phone. Turn on wifi. Bypass activation screen (backwards C method works if you keep trying for like 2 minutes), go through the set up pages and 3g will be there.
Everything is stable so far. 3g working like a charm.
Discovered a secret!
If you do not get 3g up, make sure to Enable at least one APNs in the LTE settings (##PROGRAM menu)
Now time for some icecream
Read more: Full Flash Verizon Motorola RAZR to Cricket Wireless (talk, text, MMS, and Internet)
MMS (needs to be tested)
The only thing I've realized now that is wrong, is no MMS. I have MMS through the tutorial on bypassing the apn through GoSMS, but I would very much like to not have it to be that way. I thought early on in this flash that I did have MMS, I think I was just being a smart ass so I changed some settings in ##PROGRAM for the SMS/MMS part that I copied from the Thunderbolt tutorial. I don't know if I messed something up. I was also thinking I've seen people having two Cricket apns? One for internet and one for MMS, does anyone know if that may fix it? I was thinking it may be that, but in my apn for cricket already, I edited it and filled in all the MMS settings for that APN. Maybe that's something I did wrong, I don't know.
If anyone does have working MMS on their flashed Razr, please post anything that might help us. Please post all your settings in SMS/MMS in ##PROGRAM and into your APN edit settings for Cricket APN you have for MMS (if you have anything filled out in the MMS blanks)
##Program
Enter SPC "000000"
SMS/MMS Settings
MML Server Name
[email protected] > wap.mycricket.com
Address for Upload to Online Album
438749 > 111111
Maximum MMS message size (Byte)
1228800 > 228800
SMS to Email Gateway
Anyone? Currently set at 6245
Try adding an APN for Cricket's settings or modifying the existing APNs to reflect Cricket's MMS settings.
this is what i used to get my phone on metro but the only issue im having is getting the phone itself into metropcs inventory....
i have a droid 3 esn im willing to use or if theres a way to just get the razr into the system that would be the better method
adventuressmalik said:
I found this
http://www.cricketusers.com/verizon...-cricket-wireless-talk-text-mms-internet.html
At the moment this is a placeholder for notes. The tutorial might have to be finished by someone who has more time than me to work on this device. Mine is on Verizon now. I will probably poke at it a little bit more when I get home and back to a normal schedule, but throughout December, it's going to be hectic for me. I'm going to try and add pictures so someone will have some knowledge going into this where I had none. If someone can get a hold of a Bionic tutorial, this might be similar.
Currently talk and text works but 3g data drops out. It works when it's connected but wants to cycle off and on A LOT.
As a good rule of thumb, always try to backup your settings before modifying them.
DIAG MODE
Verizon Droid RAZR Diagnostic Mode How To
NOTES (semi based off Thunderbolt tutorial)
CDMA WS 3.5 or later will give you more options and another method of writing data profiles to the device.
QPST does work HOWEVER you cannot read and then write the original settings to the phone (after modification of course). You have to start fresh and write ONLY.
CDMA AUTO (PRL) MODE (info from RLockwich)
Go into *#*#4636#*#* - Went into phone information (Set to CDMA Only PRL, DNS check allowed, Query CFU enabled).
QPST
Add the port for the device if required under QPST configuration. It's going to be the DIAG port. Just check device manager to see what port that is.
Use the Service Programming application under the QPST folder to access the phone. Connect to it but don't read.
Now follow this tutorial to write the proper information:
http://www.cricketusers.com/flashing...s-cricket.html
Write to the phone. Reboot it once all the writing is done and catch the boot to put it back in DIAG mode. If you don't it's no big deal, but you will have to power it down and get it back in DIAG mode before continuing.
CDMA WS
Open up CDMA WS and connect to the port with the RAZR. Go to the security tab and send the SPC 000000. Then go to the memory tab and send the DROID NV items which can be found at whiterabbit.org. It should write the NV items and fix the data.
UPDATE: The following might be required
Go to the "Other" tab and navigate to "R-UIM" then click read.
Change it to "NV Only" and write to phone. It should say Successful
Close out CDMA WS and reboot the phone.
Phone Settings (info from RLockwich)
Go into the ##PROGRAM select option 14 for LTE I turned off LTE bppanic, LTE Movement detection, and disabled Class 1,2,2 APNS
Additional Instructions (info from RLockwich)
Just went through all the settings again, I hope everyone can have as much luck as I just did. I was thinking, and I remember seeing the end of the thunderbolt tutorial says the last step is to remove the 4G LTE microSIM. I had tried that before early on when I first flashed it, but when I removed the card, it showed No Sim, no network connection and a SIM symbol with a exclamation point. I just tried it again a hour ago...Pulled the SIM, showed no network and then I rebooted the phone... FIVE times on and off all with immediate and STABLE 3G at 10 minutes a time between rebooting. FIXED. Done messing with it.
UPDATE 12/19 - After this last post it's been 4 days since we cracked the 3G cycling issue, and my phone is working excellent! I'm very glad I was able to be a part of this and get credit work any work I put into this.
Dina's Notes:
Got everything working THANKS to Chris and RLokwich! Oh, and for those of you that are not yet successful with this flash, just re-read the entire thread. Everything you need is HERE!
It was not all smooth in the beginning.
Insights:
1) No need for BP tools. If your phone is on the homescreen, just connect it to the cable, choose PC mode and set up the port in HW.
2) Mine took like 5 master resets before 3g showed up. So in case you are pulling your hair as to why 3g not showing up, master reset the phone. Turn on wifi. Bypass activation screen (backwards C method works if you keep trying for like 2 minutes), go through the set up pages and 3g will be there.
Everything is stable so far. 3g working like a charm.
Discovered a secret!
If you do not get 3g up, make sure to Enable at least one APNs in the LTE settings (##PROGRAM menu)
Now time for some icecream
Read more: Full Flash Verizon Motorola RAZR to Cricket Wireless (talk, text, MMS, and Internet)
MMS (needs to be tested)
The only thing I've realized now that is wrong, is no MMS. I have MMS through the tutorial on bypassing the apn through GoSMS, but I would very much like to not have it to be that way. I thought early on in this flash that I did have MMS, I think I was just being a smart ass so I changed some settings in ##PROGRAM for the SMS/MMS part that I copied from the Thunderbolt tutorial. I don't know if I messed something up. I was also thinking I've seen people having two Cricket apns? One for internet and one for MMS, does anyone know if that may fix it? I was thinking it may be that, but in my apn for cricket already, I edited it and filled in all the MMS settings for that APN. Maybe that's something I did wrong, I don't know.
If anyone does have working MMS on their flashed Razr, please post anything that might help us. Please post all your settings in SMS/MMS in ##PROGRAM and into your APN edit settings for Cricket APN you have for MMS (if you have anything filled out in the MMS blanks)
##Program
Enter SPC "000000"
SMS/MMS Settings
MML Server Name
[email protected] > wap.mycricket.com
Address for Upload to Online Album
438749 > 111111
Maximum MMS message size (Byte)
1228800 > 228800
SMS to Email Gateway
Anyone? Currently set at 6245
Try adding an APN for Cricket's settings or modifying the existing APNs to reflect Cricket's MMS settings.
Click to expand...
Click to collapse
can someoen please send me their email if they have a solution and i will pay for it!! i add esn's to metros inventory they dont accept ones with 99xxxxxxxxxx . any help would be appreciated
Bionic fully flashed and all working 100% but only 1g. Tried all the posted tips. Any
I fully flashed my bionic to cricket and everything is working 199% EXCEPT I only have 1G PERIOD!!!
ANY ideas?
Thanks
99 imei #
You have a 15 digit imei number correct?
Just remove the last number and google for a meid or esn converter
Enter your 14 digit 99 # and hit enter
you should get a 256 #
Smiles and good luck!
i followed the thread made by whoareyou and i got the 4g network option and even put in the apn but nothing seems to work. i also get notifications that the voice and data are restricted. everything im doing so far is new to me but i cant get this to just work. if anyone could help me it would be much appreciated. when i turn the network app off and back on for a second it says in service then right back to emergency calls only if that helps anything to figure this out
i'm experiencing the same proble. I got the network to say 4G, I put in the proper APN for t mobile, but nothing. I put in the lines of code again in the cmd prompt because it worked for some people on the second try, still nothing. Please help!