My Nitro is dead. Black Screen. M new to do all this. Plz help me.
Flash back stock ROM
Visit http://www.needrom.com/download/micromax-a310/
Download Stock ROM and flash it via YGDP flashtool... Tutorial is also attached in the above link
No need to worry
Just put d battery out. And again insert ur battery then charge your phone for some time, automatically ur phone gonna boot up. . I have faced this problem, this may be problem of its rom. So dont worry
Stable new official update for Nitro A310
Check this out....
mediafire.com**download**ax7w99h23hgz5p2**Micromax-A310-4.4.031.P0.141015.8297W-I01.zip
Replace ** by ' / ' for the link I cant post link because i did not post 10 times yet
>FIXED STABILITY
>HEATING FIXED
>BATTERY DRAIN FIXED
>MANY MORE.....
ENJOY ..
My new nitro a310 is dead
only black screen i was seen last six days. Pls help me
I have installed wrong rom , so its dead.
Any software is available for boot up pls tell me or some method to boot the mobile
Give details please
xyz93 said:
Check this out....
mediafire.com**download**ax7w99h23hgz5p2**Micromax-A310-4.4.031.P0.141015.8297W-I01.zip
Replace ** by ' / ' for the link I cant post link because i did not post 10 times yet
>FIXED STABILITY
>HEATING FIXED
>BATTERY DRAIN FIXED
>MANY MORE.....
ENJOY ..
Click to expand...
Click to collapse
I would like to know that is it a custom rom ? if it is is it working smooth please provide some details
your problem solved or not , I have also same problem. if u find solution pls tell me
Sonu_788 said:
My Nitro is dead. Black Screen. M new to do all this. Plz help me.
Click to expand...
Click to collapse
your problem solved or not , I have also same problem. if u find solution pls tell me
---------- Post added at 11:22 AM ---------- Previous post was at 11:07 AM ----------
xyz93 said:
Check this out....
mediafire.com**download**ax7w99h23hgz5p2**Micromax-A310-4.4.031.P0.141015.8297W-I01.zip
Replace ** by ' / ' for the link I cant post link because i did not post 10 times yet
>FIXED STABILITY
>HEATING FIXED
>BATTERY DRAIN FIXED
>MANY MORE.....
ENJOY ..
Click to expand...
Click to collapse
r u tested THIS
sureshsubbiayan said:
only black screen i was seen last six days. Pls help me
I have installed wrong rom , so its dead.
Any software is available for boot up pls tell me or some method to boot the mobile
Click to expand...
Click to collapse
Download stock rom and flash it via YGDP tool. Google for more information.
canvas nitro help
hey my canvas nitro is not formatting my phone in recovery nod olso in mobile unkle tool i have flashed differnt roms and i was fix lolipop rom on it from few days it is not working fully functing i tried to install deffert rom but it is failed
Explain in proper and clear English or some other language about your issue. @himanshu1
Sonu_788 said:
My Nitro is dead. Black Screen. M new to do all this. Plz help me.
Click to expand...
Click to collapse
just download your offcial rom from needrom.com and download ygdp and install it the password will be 369 after installing go in conf. and there select the cpb with after extracting the downloaded rom after config. it will take some time then click on start and then connect your phone wait after completing jst switch it on
hit thanks it will work 200%
file is deleted
is there any other link??
himanshu1 said:
hey my canvas nitro is not formatting my phone in recovery nod olso in mobile unkle tool i have flashed differnt roms and i was fix lolipop rom on it from few days it is not working fully functing i tried to install deffert rom but it is failed
Click to expand...
Click to collapse
If you still have problem post reply.
I'll help you through the flashing of stock rom. Just tell me your model number and have internet connection.
Related
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Flash the stock firmware
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flash the stock firmware
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
how could you explain??
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
akshay.mehta9 said:
Flashing a firmware will wipe all data in internal and also system partitions and clean install your rom
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
know that
but how to do flashing????
could u xplain me the steps
thank u
Flashing a firmware is different with every model of phone,try to search in google and flash the micromax's stock rom
Sent from my LG-P880 using xda premium
Found any solution to this?
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Egg Yolk said:
Hi,
I am in almost similar situation, I have CWM recovery and after trying JB ROM I am stuck on the Micromax boot screen.
If you have found any solution, please share it.
Thanks,
Click to expand...
Click to collapse
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Any luck with your A101
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
Hi bishu any luck with your A101
Correct me if I am wrong but you started facing issues after you flashed the JB rom
Also I dont see anywhere the rom you flashed was meant for A101.
you can try this for firmware
http://forum.gsmhosting.com/vbb/f81...all-flash-file-only-here-mega-thread-1624105/
let me know if it works else I will take a back up of my ROM and upload :good:
Bishumoharana said:
nothings friendly happening
i gave it to the guys at MMX service....... its been today...... they are not able to make it.....
givin reason that it goes to same old condition after a restart......
wish me luch to give u heads up:angel:
Click to expand...
Click to collapse
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
thanks
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
hi thanks is0l4ted
thanks for detailed help
is0l4ted said:
First of all congrats!!! U have guts dude.. Appreciate that.. Now let me tell you something "MMX phones are un-brickable" someone said on this forum.. And that is true.. As our phone dose not rely on any specific driver situation like Sumsung or HTC phones. That is because of the SoC MediaTek chipset.. Thats Awesome.. Now let me rescue you..
Download everypart from this directory ->
http://www.moulnisky.com/index.php?dir=Micromax/A101/V4_050313/
Download both files from this directory -> http://www.moulnisky.com/index.php?dir=Micromax/A101/Tools/
Download this flashing procedure .pdf file -> http://www.moulnisky.com/index.php?dir=Micromax/A101/&file=A101 DOWNLOAD PROCEDURE.pdf
If you get stuck "again" you can PM me for sure.. Have fun..
Sent from my A116
Click to expand...
Click to collapse
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Owh really did they?? I wonder with Doubt as MTK Devices are Un-Brickable btw..
hossori was
Bishumoharana said:
thanks dude
but since i gave it to mmx service cntre, they changed its MM Board
so can't try this
THX BTW
Click to expand...
Click to collapse
Like I tried all these different ROMs on xperia x10 mini pro u20i, upgraded it to JB 4.1.2, and its working fine, and all these were possible because of Sony's PC Companion that helped me to get my phone out of boot loops an all, now since I don't have that kinda apps for Micromax's A101 (not even in there official site) is there any other way where I can bring the fone back to its factory settings if anything goes wrong while custom rom installation or upgradation from ICS 4.0.4 to JB 4.2 or 4.3. (I already have those drivers and tools for A101 that was there mentioned though.However I never got those driver files in the phone when I bought it though)
If yes please let me know bout a- the best kernel for A101
b- JB 4.2 or 4.3 (preferably) ROM plus and GAPPS required
c- The stock kernel or some application like Sony has update service app for sony phones(u knw just in case..)
Thanks a lot to all of you guys and to the forum, I never thought my xperia mnini pro can run JB before, I started likeing my fon again and its all because of you guys.
How to root micromax A101
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
crptox31 said:
I have rooted n number of phones and this phone does not root.
The micromax A101 has android 4.0.4 version. So when go to settings>about> and tap build number a multiple times
the developer mode does not enable.
This sucks.
PLEASE HELP!!
Click to expand...
Click to collapse
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Thanks
Bishumoharana said:
yep
thats only one prob in rooting
u have to download this app
PDA NET+
there in go to setting inside it..... it will ask for developer blaah blaah, then click something(yu will figure it out)
and somehow from heaven u will c developer mode,
activate it.................THATS IT
done
HAVE FUNN
Click to expand...
Click to collapse
Thanks Man!!
crptox31 said:
Thanks Man!!
Click to expand...
Click to collapse
did it worked??
Bishumoharana said:
rooted thru binary update (think tats correct name)
worked nicely installed hell lot of things
then applyed [[CWM]] ( Recovery v6.0.2.8 ) For Micromax A101 .......... here's link to it http://forum.xda-developers.com/showthread.php?t=2184387
worked well
then comes hell
after updating to [[ZhaoBlastJB]] First Ever Jelly Bean Custom ROM for Micromax A90s and BLU Vivo 4.3 {got very excited....that it should work but:crying::crying::crying::crying::crying::crying:]
http://forum.xda-developers.com/showthread.php?p=40433312#post40433312
this thing screwed it so seriously that my phone now hanged on boot screen just shows SUPERFONE A101
doesn't go further
then removed CWM RECOVERY (thought if i will go to service center)
so downloaded default RECOVERY.img worked okk ok
after 2 3 times of rebooting to recovery it shows in command window or status window(i.e. below the selection part)
failed to mount E/data (cache so on)
also backup doesn't work ,shows no change
then tried wipe cache........... shows starting to remove then again shows same... failed to mount E/data (cache so on)
:crying:
please i want help
:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
Believe me! Nothing is wrong with your device! Just flash the stock ROM back and that's it...
Kitkat Rom for micromax
I have finally rooted my phone and i can't find kitkat rom for micromax a101.
One website says it has the rom
but when try downloading it, the website asks to complete the survey
after completing the survey nothing happens and no file is downloaded.
If anyone has the kitkat rom please upload it on media fire. I urgently need it.
:silly:
I think i'm in huge trouble here.
last night i tried to port a rom through dsixda kitchen, followed every instruction correctly.
then flashed that rom on my canvasHD, it didn't work.
so i restored my backup through CWM, the phone started but there was no imei & it was also stating unknown baseband.
so i followed this tutorial to fix it --> http://www.youtube.com/watch?v=s_ksRQjlh_4
after formating it showed the window with the green ring, but after that when i clicked on download it did not detect my phone,
and now it's not even powering up.
is there anything that can be done to bring my canvas hd back to life.
now is the time when i really need your help, plz tell me what i should do .
keanu_ritz said:
I think i'm in huge trouble here.
last night i tried to port a rom through dsixda kitchen, followed every instruction correctly.
then flashed that rom on my canvasHD, it didn't work.
so i restored my backup through CWM, the phone started but there was no imei & it was also stating unknown baseband.
so i followed this tutorial to fix it --> http://www.youtube.com/watch?v=s_ksRQjlh_4
after formating it showed the window with the green ring, but after that when i clicked on download it did not detect my phone,
and now it's not even powering up.
is there anything that can be done to bring my canvas hd back to life.
now is the time when i really need your help, plz tell me what i should do .
Click to expand...
Click to collapse
Are the drivers installed properly on your PC?
I would recommend uninstalling it and than installing it again.
I faced a problem when it was not detecting my CHD too and when I checked the device manager the drivers were gone.
sskullcrusherr said:
Are the drivers installed properly on your PC?
I would recommend uninstalling it and than installing it again.
I faced a problem when it was not detecting my CHD too and when I checked the device manager the drivers were gone.
Click to expand...
Click to collapse
yes the drivers are properly installed.
the phone is not starting even with the battery attached to it, it's just not powering up:crying::crying::crying:
keanu_ritz said:
yes the drivers are properly installed.
the phone is not starting even with the battery attached to it, it's just not powering up:crying::crying::crying:
Click to expand...
Click to collapse
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
sskullcrusherr said:
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
:victory::victory::victory::victory::victory: :victory::victory::victory:
:highfive::highfive::highfive::highfive::highfive::highfive::highfive:
You are just awesome @sskullcrusherr!!!!!!!!!
thank you so much for this timely help , i seriously cannot describe in words what a big help you have been!!!!!
also a big thanks to @yuweng who posted that thread!!!!
Thanks to your help, My "Black Pearl" (My canvas HD) is back from the "Davy Jones Locker" :- Captain RiTz
:victory::victory::victory::victory::victory: :victory::victory::victory::victory::victory:
keanu_ritz said:
:victory::victory::victory::victory::victory: :victory::victory::victory:
:highfive::highfive::highfive::highfive::highfive::highfive::highfive:
You are just awesome @sskullcrusherr!!!!!!!!!
thank you so much for this timely help , i seriously cannot describe in words what a big help you have been!!!!!
also a big thanks to @yuweng who posted that thread!!!!
Thanks to your help, My "Black Pearl" (My canvas HD) is back from the "Davy Jones Locker" :- Captain RiTz
:victory::victory::victory::victory::victory: :victory::victory::victory::victory::victory:
Click to expand...
Click to collapse
Glad that your CHD is alive again
Thanks a ton. This worked for me ad well. Got a few tries before I actually got the right driver
garynsa said:
Thanks a ton. This worked for me ad well. Got a few tries before I actually got the right driver
Click to expand...
Click to collapse
You're welcome. Hope this helps others too.
Give this a try
Dont worry just Carry on with SP flashtool way , it neither requires your battery to be in , neither your mobile to be on while flashing . take a latest version of canvas HD 4.2.1 official release , and brush it the way provided in flashing tutorial .
Hope this help . . Get back if more help needed.
sskullcrusherr said:
I hope this helps.
http://forum.xda-developers.com/showthread.php?t=1943442
Click to expand...
Click to collapse
Thanks for the share... Bookmarking it for future reference
What can do after intall sp tool...for revover imei
Sent from my Micromax A116 using xda premium
---------- Post added at 05:24 AM ---------- Previous post was at 05:21 AM ----------
By using engnring mode facing problem command not send
Sent from my Micromax A116 using xda premium
Sent from my Micromax A116 using xda premium
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Take it to your nearest service center....I too did it before.
here
desmond16feb said:
:crying: i installed chainfire 3d on my canvas 2 and it softbricked my mobile. i tried erasing data in recovery mode but didnt helped
i read all the threads about this problem on xda but didnt get Any of them bcoz i m new to all this android dev world
plz help and tell me solution step by step plz
i also want to ask will flashing rom help to solve this prblm? how?
i dwnlded my jelly bean rom but theres no scatter loading file in it
Click to expand...
Click to collapse
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
thanks but
slogger001 said:
I have found a guide take a look
http://forum.xda-developers.com/showthread.php?t=2376667
:good:
Click to expand...
Click to collapse
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
windows version ?
desmond16feb said:
hey i followed that guide and i getting a following prblm:
whenever i click on Download option (after loadind scatter file) it does nothing just stucked on 0%
Click to expand...
Click to collapse
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
slogger001 said:
What is ur windows version ?
does ur device drivers are installed properly connect ur device and just check in device manager
Click to expand...
Click to collapse
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Wor
desmond16feb said:
i solved this prblm now it showing me 'sptool error (8083)'
i read the threads about using different versions of sptools but nothing worked
any other solution
Click to expand...
Click to collapse
I think its because of wrong scatter file try downloading ur rom from other site may help u
i'm having a hard time finding any custom recovery for micromax doodle 4 , my friend messed up the rooted device badly not booting not even after deleting cache and hard reset .Its stuck at boot animation and stock recovery is useless .So my question is how to flash it with stock or custom rom ,i need cwm right ? but i cant find it for this phone and even if i find cwm how can i flash it cause micromax doesn't have odin mode like samsung and as i said phone stuck at boot animation .Thanks for reading and thanks in advance.
download the stock firmware and try flashing it with the sp flashtools.
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
dantezyates said:
i'm having a hard time finding any custom recovery for micromax doodle 4 , my friend messed up the rooted device badly not booting not even after deleting cache and hard reset .Its stuck at boot animation and stock recovery is useless .So my question is how to flash it with stock or custom rom ,i need cwm right ? but i cant find it for this phone and even if i find cwm how can i flash it cause micromax doesn't have odin mode like samsung and as i said phone stuck at boot animation .Thanks for reading and thanks in advance.
Click to expand...
Click to collapse
Anyways bro how did u root ur device? just asking coz am unable to find any methods to do so!
update
Does it get any updates in future
custom rom
There is any custom rom for doodle 4 like cynogenmod xperia s5 dark sense etc is there any rom pls inform me or could anyone port custom rom for doodle 4
Ari_Cool said:
download the stock firmware and try flashing it with the sp flashtools.
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
Anyways bro how did u root ur device? just asking coz am unable to find any methods to do so!
Click to expand...
Click to collapse
With kingroot latest version u can root ur doodle 4
Does anyone knows how to turn data auto off when screen goes off. Not finding any solution as all auto data disable apps are not working with andriod 5.0
Mir rayees said:
Does anyone knows how to turn data auto off when screen goes off. Not finding any solution as all auto data disable apps are not working with andriod 5.0
Click to expand...
Click to collapse
I think u should try to search on play store
plz give me a custom recovery like cwm or twrp for Micromax canvas doodle 4 q391.
Brother don't worry I will give u a link to recovery.IMG but it is in tilt screen.. U can flash developments via cwm..
ToughGuy56 said:
Brother don't worry I will give u a link to recovery.IMG but it is in tilt screen.. U can flash developments via cwm..
Click to expand...
Click to collapse
No problem bro ..just provide the link
please provide cwm or permanent root rather than kingroot for my doodle 4
Please developers I beg u
micromax doodle 4 cwm is impossible
I challenge u all developers..it is impossible to cwm micromax q391...
Try twrp on this link
http://forum.xda-developers.com/android/help/custom-recovery-doodle-4-q391-cwm-twrp-t3303108
hello guys n developers...
Has anybody found custom recicery for doodle 4...
Does flashing with stock v3 rom install custom recovery...??? Has anybody installed stock rom???
hom i can flash recovery of xpised zip file in micromax q391 doodle4
---------- Post added at 01:55 AM ---------- Previous post was at 01:51 AM ----------
give me link to recovery of xpised zip file in micromaxq391
doodle 4 update marshmallow
marshmallow rom and cwm with twrp link:-cwm-twrp-central.com/download/micromax-q391-canvas-doodle-4.html
I need 4.4 for doodle 4
Is there any port rom for this useless device ?
dantezyates said:
i'm having a hard time finding any custom recovery for micromax doodle 4 , my friend messed up the rooted device badly not booting not even after deleting cache and hard reset .Its stuck at boot animation and stock recovery is useless .So my question is how to flash it with stock or custom rom ,i need cwm right ? but i cant find it for this phone and even if i find cwm how can i flash it cause micromax doesn't have odin mode like samsung and as i said phone stuck at boot animation .Thanks for reading and thanks in advance.
Click to expand...
Click to collapse
can someone give me the link for cwm for doodle 4 q391
Mir rayees said:
Does anyone knows how to turn data auto off when screen goes off. Not finding any solution as all auto data disable apps are not working with andriod 5.0
Click to expand...
Click to collapse
Use tasker.
Get more details on Google.
my device wont turned on..
ihave flashed patched-boot.img via adb and the phone stuck to bootloop
so i downloaded stock rom to fresh flash using SP flash tool
Sp flash tool showing me error "PMT Changed select Format All+Download" So i did Format All+download Flash Was Successful but now my phone turns on with blury blury white screen same like broken display...
what to do next to bring it back to life ??
Lava Iris 88s MT6739
I had the same problem with my IRIS88s , i flashed IK.img , BOOT.img from IRIS 88 rom , it booted up but still have some problems like the battery logo shows -1% all time , and slowly charging , please post here if you have any solution ,
fa000wi said:
I had the same problem with my IRIS88s , i flashed IK.img , BOOT.img from IRIS 88 rom , it booted up but still have some problems like the battery logo shows -1% all time , and slowly charging , please post here if you have any solution ,
Click to expand...
Click to collapse
pls share those 2 file . ive downloaded whole rom but lk.img is empty. and prealoder.img are in kb's ihave also downloaded some stock rom from customer care.... but its password protected any its paid. they are from bangladesh.. and they have only local Online payment mode (bkash). and ihave no access to western union.. iam in offshore.
View attachment lk-verified.img
elyaaz said:
pls share those 2 file . ive downloaded whole rom but lk.img is empty. and prealoder.img are in kb's ihave also downloaded some stock rom from customer care.... but its password protected any its paid. they are from bangladesh.. and they have only local Online payment mode (bkash). and ihave no access to western union.. iam in offshore.
Click to expand...
Click to collapse
fa000wi said:
View attachment 4607156
Click to expand...
Click to collapse
thanks bro . phone booted and have same issues as you mention
have you found any fix ???
elyaaz said:
thanks bro . phone booted and have same issues as you mention
have you found any fix ???
Click to expand...
Click to collapse
No I didnt find any thing about this problem ,
I was able to fix this issue, if anyone still interested i can upload complete ROM for lava iris88s which is based on lava isris88
lion67 said:
I was able to fix this issue, if anyone still interested i can upload complete ROM for lava iris88s which is based on lava isris88
Click to expand...
Click to collapse
yes bro in need of it same issue
lion67 said:
I was able to fix this issue, if anyone still interested i can upload complete ROM for lava iris88s which is based on lava isris88
Click to expand...
Click to collapse
Can you upload rom
lion67 said:
I was able to fix this issue, if anyone still interested i can upload complete ROM for lava iris88s which is based on lava isris88
Click to expand...
Click to collapse
hi bro can you please upload the rom or give link
any one has the rom for lava iris 88s please share
Thanks in advance
lion67 said:
I was able to fix this issue, if anyone still interested i can upload complete ROM for lava iris88s which is based on lava isris88
Click to expand...
Click to collapse
kindly upload the rom
lava iris 88s
I have iris88s rom s215 mod with root.
LAVA_iris88s_2_16_S215_WOC_19F24 - 8.1.0
Can't post link.
[To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!]
tiger1925 said:
I have iris88s rom s215 mod with root.
LAVA_iris88s_2_16_S215_WOC_19F24 - 8.1.0
Can't post link.
[To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!]
Click to expand...
Click to collapse
Please inbox the link to me
or paste link here like this
www google com
Devilsho said:
Please inbox the link to me
or paste link here like this
www google com
Click to expand...
Click to collapse
Rom : I-ITTP$ : / / bit.ly / 31Ftgjl
tiger1925 said:
Rom : https://bit.ly/31Ftgjl
Click to expand...
Click to collapse
Thanks i will try
Whats the password bro for the rar file
Devilsho said:
Thanks i will try
Whats the password bro for the rar file
Click to expand...
Click to collapse
pm sent
Lava iris 88s stock rom
tiger1925 said:
pm sent
Click to expand...
Click to collapse
can you please share the password for the zip file.
Devilsho said:
Thanks i will try
Whats the password bro for the rar file
Click to expand...
Click to collapse
please share the password bro
neeraj14.1991 said:
please share the password bro
Click to expand...
Click to collapse
Pm sent
need password
an you please share the password for the zip file