From Canada using the unbranded Canadian (North American) region firmware (4.4.4 stock).
My question is, will I run into any issues if I flash a rooted Rom of 4.4.4 (I believe the two roms available are both based off the RUssian region firmware)?
Or are all regions essentially the same apart from apn settings, etc?
Should I wait until someone builds a 4.4.4 rooted flashable zip based off the north American region firmware?
Any info is appreciated. Thanks in advance
bdithug said:
From Canada using the unbranded Canadian (North American) region firmware (4.4.4 stock).
My question is, will I run into any issues if I flash a rooted Rom of 4.4.4 (I believe the two roms available are both based off the RUssian region firmware)?
Or are all regions essentially the same apart from apn settings, etc?
Should I wait until someone builds a 4.4.4 rooted flashable zip based off the north American region firmware?
Any info is appreciated. Thanks in advance
Click to expand...
Click to collapse
You should be fine to flash it. However i do need to know if your on unlocked or locked bootloader so i can give apropriate instructions
Envious_Data said:
You should be fine to flash it. However i do need to know if your on unlocked or locked bootloader so i can give apropriate instructions
Click to expand...
Click to collapse
Bootloader is locked, but is unlockable. I've already backed up my ta partition when I rooted 314, but prefer to keep my bootloader locked anyways. At least until my 1 year warranty runs out through Sony.
bdithug said:
Bootloader is locked, but is unlockable. I've already backed up my ta partition when I rooted 314, but prefer to keep my bootloader locked anyways. At least until my 1 year warranty runs out through Sony.
Click to expand...
Click to collapse
Upgrading to 4.4.4 on LB from 314
1. Flash 4.4.4 Rom Of your choice
2. Flash superSU just incase
~You can try flashing Nut's dual recovery (not sure if it works)
3. Use flashtool to Flash a 4.4.4 FTF excluding system.sin
I'm already on 167 stock though. I updated through pcc. So I guess I have to downgrade to 314 in order to root and flash a recovery.
bdithug said:
I'm already on 167 stock though. I updated through pcc. So I guess I have to downgrade to 314 in order to root and flash a recovery.
Click to expand...
Click to collapse
Yes you have to downgrade to root atleast :/
How did you do?
bdithug said:
From Canada using the unbranded Canadian (North American) region firmware (4.4.4 stock).
My question is, will I run into any issues if I flash a rooted Rom of 4.4.4 (I believe the two roms available are both based off the RUssian region firmware)?
Or are all regions essentially the same apart from apn settings, etc?
Should I wait until someone builds a 4.4.4 rooted flashable zip based off the north American region firmware?
Any info is appreciated. Thanks in advance
Click to expand...
Click to collapse
How did you solve this problem?
marcgrissz said:
How did you solve this problem?
Click to expand...
Click to collapse
Made my own pre-rooted flashable zip. It's 167 stock, but with root. There's a guide on here how to do it. Very simple and works great!
Related
Soo... I have a Bell C6806. My question to all the great devs out there: Is it possible to flash from the .532 stock rooted to .757 stock rooted? When flashing do I flash both the zipable file and the tft or can I just go into TWRP flash the zipable and that's it?
YellowFerrari said:
Soo... I have a Bell C6806. My question to all the great devs out there: Is it possible to flash from the .532 stock rooted to .757 stock rooted? When flashing do I flash both the zipable file and the tft or can I just go into TWRP flash the zipable and that's it?
Click to expand...
Click to collapse
The simple answer is to sell the Bell and buy a real c6806
The other way is to follow one of the several 757 threads for LB (locked bootloader). They should work for the Bell
blueether said:
The simple answer is to sell the Bell and buy a real c6806
The other way is to follow one of the several 757 threads for LB (locked bootloader). They should work for the Bell
Click to expand...
Click to collapse
Do I flash the ftf and the zipable or can I go into recovery an flash the zip?
YellowFerrari said:
Do I flash the ftf and the zipable or can I go into recovery an flash the zip?
Click to expand...
Click to collapse
It's been too long since I played with a locked bootloader, but follow the instructions in the thread. You will need both files from memory one is the system the other is the kernel and baseband etc
What Firmware do you use?
I'm searching for stock USA firmware but I don't know what is it, I look here http://forum.xda-developers.com/showthread.php?t=2759934 but don't know what is the firmware that I have to flash. Please something from USA can tell me what is the firmware of Z2 Unlocked?
Thanks in advance
Duilio Patiño said:
What Firmware do you use?
I'm searching for stock USA firmware but I don't know what is it, I look here http://forum.xda-developers.com/showthread.php?t=2759934 but don't know what is the firmware that I have to flash. Please something from USA can tell me what is the firmware of Z2 Unlocked?
Thanks in advance
Click to expand...
Click to collapse
if your flashing for a branded device then flash T-Mobile-USA
as for unbranded if you cant find for your device then you can simply flash for any country,
latest firmware version is 314(cant remember rest but last 3 numbers)
i didn't explain my last post good enough so this is the straight question
i have a unlocked branded (UK O2) Z2, and i want to flash a stock general/unbranded ftf, is that safe ?
Yes
As simple as yes because i have a 3 UK Z2 but it has a Generic Tiwan FTF flashed to it
Will you get generic/unbranded OTA updates after that?
VergiL09 said:
Will you get generic/unbranded OTA updates after that?
Click to expand...
Click to collapse
I should recieve updates for that FTF i flashed.
Typicaly i dont wait, i usualy flash a new ftf before the OTA is avaliable
hey there!!
so i have the SGP521, and i understood that if i want to root it i need to flash older version of the firmware, so as it. - i did it! i installed the 17.1.A.2.69 firmware, and i rooted it sucseccfuly! but now i want to update it's firmware to the latest, and i don't know if it possible, that i will flash a new firmware and keep my device ROOTED. (i'm using Flashtool).
is there a way to only "update" the firmware without wiping the root (and maybe without wiping the user data too..)
thanks!
Tal.
Someone Help?
Flash an already rooted image, like this one: http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-flashable-zip-t2961330
rosco_pc said:
Flash an already rooted image, like this one: http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-flashable-zip-t2961330
Click to expand...
Click to collapse
oh this is for the sgp511 version!!
http://forum.xda-developers.com/xperia-z2/development/rom-t2991129
http://forum.xda-developers.com/xperia-z2/general/4-4-4-creating-rooted-update-package-t2933155
http://forum.xda-developers.com/xperia-z2-tablet/general/prerooted-flashable-zip-t2964640
Having read these three threads, I don't know and it seems the 511 trick works for the 512. Don't know if it will do the 521.
I'd like to know of the lollipop update coming will be rootable or kill root.
bagiz010 said:
hey there!!
so i have the SGP521, and i understood that if i want to root it i need to flash older version of the firmware, so as it. - i did it! i installed the 17.1.A.2.69 firmware, and i rooted it sucseccfuly! but now i want to update it's firmware to the latest, and i don't know if it possible, that i will flash a new firmware and keep my device ROOTED. (i'm using Flashtool).
is there a way to only "update" the firmware without wiping the root (and maybe without wiping the user data too..)
thanks!
Tal.
Click to expand...
Click to collapse
I think I will not take the chance and maybe lose my 4g LTE contectivity by installing other version firmware..
But i will wait for the lollipop update too (hope it will not kill the battery, like it does on almost every phone it's installed on)
but thanks very much for the help!!
Hey guys!
Ive been trying to figure out how to go about rooting my tablet but since I am new at this stuff I just want to make sure I dont **** up
My questions are:
1. My tablet is 5.0.2 atm, as far as I know I have to downgrade to be able to root?
2. If I need to downgrade I believe I need a FTF file, I have a LTE version which is bought in sweden. Do I need a specifik FTF file for my country or can I use http://forum.xda-developers.com/showthread.php?t=2741233to downgrade my tablet?
3. Can i still use this guide http://forum.xda-developers.com/showthread.php?t=2792056 to root my device after I downgraded the firmware or is it outdated? If its outdated is there any updated guide I can use?
Any help is appreciated!
Failhoew said:
Hey guys!
Ive been trying to figure out how to go about rooting my tablet but since I am new at this stuff I just want to make sure I dont **** up
My questions are:
1. My tablet is 5.0.2 atm, as far as I know I have to downgrade to be able to root?
2. If I need to downgrade I believe I need a FTF file, I have a LTE version which is bought in sweden. Do I need a specifik FTF file for my country or can I use http://forum.xda-developers.com/showthread.php?t=2741233to downgrade my tablet?
3. Can i still use this guide http://forum.xda-developers.com/showthread.php?t=2792056 to root my device after I downgraded the firmware or is it outdated? If its outdated is there any updated guide I can use?
Any help is appreciated!
Click to expand...
Click to collapse
1. There is this: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461. But it ain´t give proper root and there is also some security concerns with it but your decision.
2. Yes. You need FTF file which is 4.4.2 firmware for you device. Latest rootable is 17.1.2.A.0.314. Here is download link for SGP 521 if you want. https://mega.co.nz/#!cN5ykLrL!0w38j4lWIHFm1rZdwexScG9Cpz2BghrSZPpLRkyTcL8 . However your link should work also. If you only use it for rooting it don´t have to be for your region.
3. Your link would work for rooting properly. However there is other methods too.
4. After you achieved root just install custom recovery for you device and flash latest prerooted firmware for your device with it and you are good.
kulvertti said:
1. There is this: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461. But it ain´t give proper root and there is also some security concerns with it but your decision.
2. Yes. You need FTF file which is 4.4.2 firmware for you device. Latest rootable is 17.1.2.A.0.314. Here is download link for SGP 521 if you want. https://mega.co.nz/#!cN5ykLrL!0w38j4lWIHFm1rZdwexScG9Cpz2BghrSZPpLRkyTcL8 . However your link should work also. If you only use it for rooting it don´t have to be for your region.
3. Your link would work for rooting properly. However there is other methods too.
4. After you achieved root just install custom recovery for you device and flash latest prerooted firmware for your device with it and you are good.
Click to expand...
Click to collapse
Thanks for the advice man!
Ill give it a shot today
kulvertti said:
1. There is this: http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461. But it ain´t give proper root and there is also some security concerns with it but your decision.
2. Yes. You need FTF file which is 4.4.2 firmware for you device. Latest rootable is 17.1.2.A.0.314. Here is download link for SGP 521 if you want. https://mega.co.nz/#!cN5ykLrL!0w38j4lWIHFm1rZdwexScG9Cpz2BghrSZPpLRkyTcL8 . However your link should work also. If you only use it for rooting it don´t have to be for your region.
3. Your link would work for rooting properly. However there is other methods too.
4. After you achieved root just install custom recovery for you device and flash latest prerooted firmware for your device with it and you are good.
Click to expand...
Click to collapse
Alright mate would this work for me as I took it that I need to unlock the bootloader to install a custom recovery?
http://forum.xda-developers.com/showthread.php?t=3159705
Thanks
Sent from my SGP521 using Tapatalk
nathlynn2201 said:
Alright mate would this work for me as I took it that I need to unlock the bootloader to install a custom recovery?
http://forum.xda-developers.com/showthread.php?t=3159705
Thanks
Sent from my SGP521 using Tapatalk
Click to expand...
Click to collapse
There is no need to unlock bootloader if you just want to root your device. Bootloader unlocking is needed if you want to try custom kernels or roms that use custom kernels. And yes this work for your device also.
kulvertti said:
There is no need to unlock bootloader if you just want to root your device. Bootloader unlocking is needed if you want to try custom kernels or roms that use custom kernels. And yes this work for your device also.
Click to expand...
Click to collapse
OK so with a locked bootloader I can downgrade to 4.4.2 for my region model root using kingroot..? Then install a custom recovery without having an unlocked bootloader then flash Pre rooted ftf lollipop ROM build. Is the updated kernel and firmware in the Pre rooted stock ROMs? Thanks.
Sent from my A0001 using Tapatalk
nathlynn2201 said:
OK so with a locked bootloader I can downgrade to 4.4.2 for my region model root using kingroot..? Then install a custom recovery without having an unlocked bootloader then flash Pre rooted ftf lollipop ROM build. Is the updated kernel and firmware in the Pre rooted stock ROMs? Thanks.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yes you can downgrade to 4.4.2 firmware with locked bootloader. After that you don´t need kingroot to root your device because @[NUT]´s dualrecovery pc installer can root your device before it install custom recovery. After that you can flash prerooted firmware (= .zip file) with custom recovery. Usually prerooted stock roms has whole firmware including kernel. Their also include SuperSu and custom recovery. And there is no need to unlock your bootloader in any step for this unless you want to do that.
OK so I flashed a ftf file from this thread http://forum.xda-developers.com/showthread.php?t=3061431 I don't think its right as its for HK etc. A 4.4.2 ftf. 17.1.a.2.402 HK/sa/as/kw.
I was on 23.1.A.1.28 in the UK as O2 UK being the 4g network. But according to that thread the 23.1.a.1.28 I was on is generic HK so I'm confused. How can I get back to my original then? Thanks
kulvertti said:
Yes you can downgrade to 4.4.2 firmware with locked bootloader. After that you don´t need kingroot to root your device because @[NUT]´s dualrecovery pc installer can root your device before it install custom recovery. After that you can flash prerooted firmware (= .zip file) with custom recovery. Usually prerooted stock roms has whole firmware including kernel. Their also include SuperSu and custom recovery. And there is no need to unlock your bootloader in any step for this unless you want to do that.
Click to expand...
Click to collapse
Sent from my A0001 using Tapatalk
kulvertti said:
Yes you can downgrade to 4.4.2 firmware with locked bootloader. After that you don´t need kingroot to root your device because @[NUT]´s dualrecovery pc installer can root your device before it install custom recovery. After that you can flash prerooted firmware (= .zip file) with custom recovery. Usually prerooted stock roms has whole firmware including kernel. Their also include SuperSu and custom recovery. And there is no need to unlock your bootloader in any step for this unless you want to do that.
Click to expand...
Click to collapse
Just made my own xperifirm ftf file the guide I followed on xperiblog said not to add the ta partitions is that correct would you know?
Sent from my A0001 using Tapatalk
nathlynn2201 said:
Just made my own xperifirm ftf file the guide I followed on xperiblog said not to add the ta partitions is that correct would you know?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I have tried both ways. Including ta partition and excluding it. Both works just fine for me.
kulvertti said:
I have tried both ways. Including ta partition and excluding it. Both works just fine for me.
Click to expand...
Click to collapse
OK thanks I did it without the ta partition like suggested but wasn't sure if it was 100% correct. Should all be fine though. I'm currently now rooted and all fine but what I want to do is have a Pre rooted flashable zip of my ftf I've made so it is my actual stock ROM I'm running. I've looked into the prfcreator but don't wanna do it and run the risk of bricking my z2 tab. Have you used prfcreator? I guess all I need is my ftf file to use. The most update supersu zip I want. And then I need to somehow have the xzdualrecovery.zip but not sure if that's all I need or if I need the current Sony signed kernel or what. Thanks
Sent from my A0001 using Tapatalk
---------- Post added at 05:50 PM ---------- Previous post was at 05:35 PM ----------
kulvertti said:
I have tried both ways. Including ta partition and excluding it. Both works just fine for me.
Click to expand...
Click to collapse
nathlynn2201 said:
OK thanks I did it without the ta partition like suggested but wasn't sure if it was 100% correct. Should all be fine though. I'm currently now rooted and all fine but what I want to do is have a Pre rooted flashable zip of my ftf I've made so it is my actual stock ROM I'm running. I've looked into the prfcreator but don't wanna do it and run the risk of bricking my z2 tab. Have you used prfcreator? I guess all I need is my ftf file to use. The most update supersu zip I want. And then I need to somehow have the xzdualrecovery.zip but not sure if that's all I need or if I need the current Sony signed kernel or what. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Must admit reading up more looks pretty straight forward as I just use NUTz xzdualrecovery flashable zip as the recovery zip. I'm just unsure on whether I would need to check kernel otakernel modem and ltalabel for our device. Thanks
Sent from my A0001 using Tapatalk
nathlynn2201 said:
OK thanks I did it without the ta partition like suggested but wasn't sure if it was 100% correct. Should all be fine though. I'm currently now rooted and all fine but what I want to do is have a Pre rooted flashable zip of my ftf I've made so it is my actual stock ROM I'm running. I've looked into the prfcreator but don't wanna do it and run the risk of bricking my z2 tab. Have you used prfcreator? I guess all I need is my ftf file to use. The most update supersu zip I want. And then I need to somehow have the xzdualrecovery.zip but not sure if that's all I need or if I need the current Sony signed kernel or what. Thanks
Sent from my A0001 using Tapatalk
---------- Post added at 05:50 PM ---------- Previous post was at 05:35 PM ----------
Must admit reading up more looks pretty straight forward as I just use NUTz xzdualrecovery flashable zip as the recovery zip. I'm just unsure on whether I would need to check kernel otakernel modem and ltalabel for our device. Thanks
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Depending what you want but if you include everything else but signing you end up to fully functional prerooted firmware.
kulvertti said:
Depending what you want but if you include everything else but signing you end up to fully functional prerooted firmware.
Click to expand...
Click to collapse
Sorry mate if I use my ftf and super su.zip and xzdualrecovery.flashable.zip then add all checks do I also have to get it signed? Or I can do all checks and not need signing and it will be fine...? Sorry mate first time and all just trying to work out different things thank you.
Sent from my A0001 using Tapatalk
nathlynn2201 said:
Sorry mate if I use my ftf and super su.zip and xzdualrecovery.flashable.zip then add all checks do I also have to get it signed? Or I can do all checks and not need signing and it will be fine...? Sorry mate first time and all just trying to work out different things thank you.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
No need to be sorry. You don't need to sign your zip because TWRP can handle unsigned zip files just fine. There is nothing wrong to sign your zip file but some times it can cause problems. Your choice.