[Q] Is there a root for software version vs98511c?? Help PLease - Verizon LG G3

I just got this new G3 and i update now its 11c is there a root i would really like to root it please help

Could you always flash back to 10b and then root? I took the update a few days ago went back to 10b so my Foxfi works. Just hope I dont have to take the update later. This is what I did.
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140

Yes, drop back to 10b, root, then figure out what you want to do. In my case I applied the modem, boot, and system files from 11c, but did not try to apply the ota directly.

I would flash back to 10b. Then root with Stump, Bump it so TWRP recovery will be accessible. Then download Beanstown 11c rom and flash it. You will then be on the latest version without worrying about ota updates breaking root.
Just wait for the developers to release the updates from here on or you will risk losing root and unlocked bootloader.

sadly, after getting a replacement phone, i am in this boat now as well.
loved what stump did for my old one, just need root access for ti and such.

Later on, no telling how much later yet, replacement phones will come with Lollipop preinstalled. At that point there might be no way to root and bump at all, because rolling back to v10b might be blocked.
Point is, if you need access to your phone as if you really owned it yourself, get it now and protect it best you can. Things are changing.
Sent from my VS985 4G using Tapatalk

How did you roll back to 10b? With 11c you can't get the phone into download mode. I tried it and followed the instructions to the t and all I got was a battery charging screen. I'm not a noob.

JCryselZ33 said:
How did you roll back to 10b? With 11c you can't get the phone into download mode. I tried it and followed the instructions to the t and all I got was a battery charging screen. I'm not a noob.
Click to expand...
Click to collapse
You have to use the KDZ method. See here: http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140

Downgrade From VS98511C to VS98510B (Stock)
ride5000 said:
sadly, after getting a replacement phone, i am in this boat now as well.
loved what stump did for my old one, just need root access for ti and such.
Click to expand...
Click to collapse
Hey I accidentally took the update and thought I was outta luck. But I was able to downgrade back to stock then use Stump to root. Go here. Worked great for me.
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140

Once y'all kdz back to 10b flash a 11c rom. There's 2 to choose from. Jasmine and beanstown. I got Jasmine running. Its a beast. I also recommend the sky kernel in the og dev section. Really helps with battery.
Sent from my LG G3.

Correct me if I'm wrong... I thought stump auto installed TWRP? I'm new to Lg... came from an S4..... so I'm not very familiar with downgrading from 11c-10b but I'm slowly figuring it out through multiple forums.... I'm still not sure wth bumping TWRP is though.... I just want to get into CM12 eventually... lol
Edit: N/m I was thinking of BUMP..... damn YouTube videos making me confused at times...

Bump does not install on your phone itself or make any changes to your phone. Stuff like TWRP must be changed slightly by their developers to make them appear signed so they will load - bumpD does that. To the things you are flashing once rooted via Stump or ioRoot or PurpleDrake.
You don't use bumpD yourself, you flash images that have been bumpD.
Sent from my VS985 4G using Tapatalk

Related

[Q] Phone is "Broken" Please Help!

Alright, I don't really know what happened or what I did, but something bad happened. To begin with, I rooted my phone with Stump and that went fine. After a month or so my phone started to lock itself out and sometimes not unlock. This bug, I don't know what it was, was probably from one of the roms. I uninstalled and removed all the roms and "unrooted" my phone. When I try to root my phone again, it sees the phone as unsupported. I did a hard reset/ I even used towelroot and that was bad. My phone also can't be used on my computer because it won't read it as an LG device with a driver. I've hard reset several times and tried many things. What I know for sure is that one rom or something didn't get removed. For example, I had an emoji switcher rom and I still have Google's emoji's instead of the default LG after reset. I can also lock my phone by double tapping the top left corner, which was another rom. This is all when "unrooted"
Can someone help me fix this? I don't have a warranty on the phone and SuperSU doesn't let me do anything on it.
Andorew said:
Alright, I don't really know what happened or what I did, but something bad happened. To begin with, I rooted my phone with Stump and that went fine. After a month or so my phone started to lock itself out and sometimes not unlock. This bug, I don't know what it was, was probably from one of the roms. I uninstalled and removed all the roms and "unrooted" my phone. When I try to root my phone again, it sees the phone as unsupported. I did a hard reset/ I even used towelroot and that was bad. My phone also can't be used on my computer because it won't read it as an LG device with a driver. I've hard reset several times and tried many things. What I know for sure is that one rom or something didn't get removed. For example, I had an emoji switcher rom and I still have Google's emoji's instead of the default LG after reset. I can also lock my phone by double tapping the top left corner, which was another rom. This is all when "unrooted"
Can someone help me fix this? I don't have a warranty on the phone and SuperSU doesn't let me do anything on it.
Click to expand...
Click to collapse
after removing root, you need to flash back to stock to get it working again with the exploit.
Andorew said:
Alright, I don't really know what happened or what I did, but something bad happened. To begin with, I rooted my phone with Stump and that went fine. After a month or so my phone started to lock itself out and sometimes not unlock. This bug, I don't know what it was, was probably from one of the roms. I uninstalled and removed all the roms and "unrooted" my phone. When I try to root my phone again, it sees the phone as unsupported. I did a hard reset/ I even used towelroot and that was bad. My phone also can't be used on my computer because it won't read it as an LG device with a driver. I've hard reset several times and tried many things. What I know for sure is that one rom or something didn't get removed. For example, I had an emoji switcher rom and I still have Google's emoji's instead of the default LG after reset. I can also lock my phone by double tapping the top left corner, which was another rom. This is all when "unrooted"
Can someone help me fix this? I don't have a warranty on the phone and SuperSU doesn't let me do anything on it.
Click to expand...
Click to collapse
You have to flash back to stock via the link below. Once you Unroot it is the only way of getting root back. Plus it is always nice to know how to return to stock before someone starts rooting, flashing roms etc... so when you get into this positions you already know the solution.
Edit: Make sure you do not take the System update after you flash back to 10b otherwise you will not be able to root any way.
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
Jimi Mack said:
You have to flash back to stock via the link below. Once you Unroot it is the only way of getting root back. Plus it is always nice to know how to return to stock before someone starts rooting, flashing roms etc... so when you get into this positions you already know the solution.
Edit: Make sure you do not take the System update after you flash back to 10b otherwise you will not be able to root any way.
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
Click to expand...
Click to collapse
Thanks for the Help. I got my phone back to stock. I don't actually plan on rerooting it for a while. But, do you know why my phone won't take the system update? I tried to and an error appeared.
Andorew said:
Thanks for the Help. I got my phone back to stock. I don't actually plan on rerooting it for a while. But, do you know why my phone won't take the system update? I tried to and an error appeared.
Click to expand...
Click to collapse
Did you get back to stock via the method I supplied? It has to be done that way and then check in your "about phone" and verify you are on "10b". From here the phone should take the 11c update.
Jimi Mack said:
Did you get back to stock via the method I supplied? It has to be done that way and then check in your "about phone" and verify you are on "10b". From here the phone should take the 11c update.
Click to expand...
Click to collapse
Yes, I have 10b, but it fails to update to 11c
Andorew said:
Yes, I have 10b, but it fails to update to 11c
Click to expand...
Click to collapse
Did you disable anything ?
If you returned to stock v10b via the .kdz file, you will not get the OTA because your are on an earlier version of v10b than the phone released with.
You are in a perfect situation to flash bumped TWRP recovery and then the v11c modem, system, and boot images, effectively updating you just like the OTA would have.
If you require the OTA to self-apply, then you need to restore using the .TOT method.
Sent from my VS985 4G using Tapatalk
trent999 said:
If you returned to stock v10b via the .kdz file, you will not get the OTA because your are on an earlier version of v10b than the phone released with.
You are in a perfect situation to flash bumped TWRP recovery and then the v11c modem, system, and boot images, effectively updating you just like the OTA would have.
If you require the OTA to self-apply, then you need to restore using the .TOT method.
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
How can I flash a newer version such as 11c(Or upcoming Android L)? Without .tot
You can't. You kdz back to keep from getting the update so you can root and bump and flash roms. You tot to get to the right version to take the update
Once L is released OTA, our noble developers will make it possible for us who have root and recovery to flash the OTA components safely, retaining root and custom recovery.
We hope.
Why would you want to take the current locked OTA?
If you TOT you can still root. Before you take the update.

12B to 10B downgrade possible?

I've tried searching and reading through the various downgrade and upgrade available threads, but can't seem to find anything concrete on the matter. Has anyone confirmed that rollback has OR has not been blocked in the latest OTA - 12B? I'm assuming the tot method wouldn't work since it didn't work with 11C, so I'm most specifically wondering about the kdz method. I'm trying to figure this out for a friend. Thanks!
ohlin5 said:
I've tried searching and reading through the various downgrade and upgrade available threads, but can't seem to find anything concrete on the matter. Has anyone confirmed that rollback has OR has not been blocked in the latest OTA - 12B? I'm assuming the tot method wouldn't work since it didn't work with 11C, so I'm most specifically wondering about the kdz method. I'm trying to figure this out for a friend. Thanks!
Click to expand...
Click to collapse
This topic is of interest to me as I started on 10B and never took any OTA. I rooted, bump'd and started running Beanstown 11C, Cyanogenmod 11, BlissPop 5.0.1 and now SkyDragon 2.0.0. I have seen some report that the .tot method has been met with mixed success for people that took the 11C update but I haven't seen any details. Does the LG Flash Tool have issues laying down the base 10B image when it sees 11C? I would guess if that is the case, the same would be for 12B. Has anyone tried formatting with TWRP etc.?
I have never done the LG Flash Tool with .tot but was always keeping it in my toolbox for when the official Lollipop 5.0.x build comes from Verizon. I would be interested to see why the .tot method fails or the KDZ method for that matter.
Don't know about 12b (but I think someone else did reply to this question in another forum and stated that yes, you can downgrade back to 10b), but this post says downgrading from 11c possible:
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
iBolski said:
Don't know about 12b (but I think someone else did reply to this question in another forum and stated that yes, you can downgrade back to 10b), but this post says downgrading from 11c possible:
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140
Click to expand...
Click to collapse
Yep, I know all about that. I've tot restored 10B a couple different times, and kdz'ed an 11C install back to 10B once, so I'm very familiar with both of those. I'm really curious to know though specifically if anyone has been able to confirm if 12B can be kdz'ed (or tot'ed for that matter, but I doubt it), back to 10B. If a new phone is bought in the next few weeks an comes out of the box with 12B flashed, I need to know whether this I would be stuck as unrootable/unlockable for the time being.
done.
I did it. Was curious about Advanced Calling so I downgraded since I forgot to make a backup of stock recovery. Got back to stock with no root and no custom recovery. Then I took the OTA updates to 12B. Found out I could not root from there and crossed my fingers and downgraded again. Had a moment of panic as the first attempt failed. Instead of getting a success msg on my computer and a big red number 3 on my phone I had a big red number 2. Restarted the process again and this time it took it. Rooted first this time, then took the updates. Not really interested anymore in custom ROMS and am happy with stock and root. I am curious though if I will be able to install TWRP from here. Haven't tried it.
I'd be careful though and get one more confirmation before you try it. When I said panic, that is really putting it lightly lol
ohlin5 said:
Yep, I know all about that. I've tot restored 10B a couple different times, and kdz'ed an 11C install back to 10B once, so I'm very familiar with both of those. I'm really curious to know though specifically if anyone has been able to confirm if 12B can be kdz'ed (or tot'ed for that matter, but I doubt it), back to 10B. If a new phone is bought in the next few weeks an comes out of the box with 12B flashed, I need to know whether this I would be stuck as unrootable/unlockable for the time being.
Click to expand...
Click to collapse
I can tell you this, I was rooted and the 12B update is on my phone and I'm still rooted. I'm going to try and flash back to 10B to see if it works or not. I'm trying to download the KDZ file, but it keeps aborting. The connection is REAL slow.
I haven't tried the TOT file yet either.
I used the TOT file myself.
A couple of things to consider, the tot download is to 10b_3 (the released version) and kzd is to version 10b_1.
The main difference is that 10b_3 Will take OTA updates while 10b_1 Will not.
Sent from my VS985 4G using XDA Free mobile app
tomlow said:
I used the TOT file myself.
Click to expand...
Click to collapse
Awesome! That's what I wanted to know. I'll probably stay on 12b rooted for now then.
---------- Post added at 11:37 AM ---------- Previous post was at 11:36 AM ----------
tomlow said:
I did it. Was curious about Advanced Calling so I downgraded since I forgot to make a backup of stock recovery. Got back to stock with no root and no custom recovery. Then I took the OTA updates to 12B. Found out I could not root from there and crossed my fingers and downgraded again. Had a moment of panic as the first attempt failed. Instead of getting a success msg on my computer and a big red number 3 on my phone I had a big red number 2. Restarted the process again and this time it took it. Rooted first this time, then took the updates. Not really interested anymore in custom ROMS and am happy with stock and root. I am curious though if I will be able to install TWRP from here. Haven't tried it.
I'd be careful though and get one more confirmation before you try it. When I said panic, that is really putting it lightly lol
Click to expand...
Click to collapse
Oh, and yes. You can install TWRP. As long as you're rooted, use Flashify to flash it. I can't seem to get to it via the button pushes though, so I installed Quick Boot and use that to boot into recovery, although at this time, I have no use for the recovery except for doing nandroid backups.
tomlow said:
I used the TOT file myself.
Click to expand...
Click to collapse
Thanks a ton for these confirmations....I have to say though, it's very interesting that tot worked for you when so many people had such trouble using the tot when 11C came out. Thanks again though!
ohlin5 said:
Thanks a ton for these confirmations....I have to say though, it's very interesting that tot worked for you when so many people had such trouble using the tot when 11C came out. Thanks again though!
Click to expand...
Click to collapse
I'm just surprised SuperSU survived the OTAs as I thought it wouldn't since the exploit probably does some modification to the system partition. On Motorola phones it usually caused issues.
I downgraded from 12b using the kdz method. No problems what so ever other than the flash tool crashing at the end.
cbrehob said:
I downgraded from 12b using the kdz method. No problems what so ever other than the flash tool crashing at the end.
Click to expand...
Click to collapse
Interesting....well then I'll ask you another couple off topic questions then, since the only experience I had with the kdz method turned out SUPER sketchy haha. So when I started the flash tool program up and began the process of flashing, I had 2 weird occurrences and want to know if you experienced anything similar. The first weird thing that happened is I never had any confirmation that the software was "seeing" the phone as being connected. I don't have it in front of me as I'm at work, but I recall one screen having boxes in the lower left corner that seemed like they should show something if it were seeing a device connected, but they were completely blank - do you know what screen I'm referring to, and did this happen to you?
And the second thing that happened that about gave me a heart attack (since it was on a friend's phone hahaha), was that when I couldn't get those boxes described above to populate and give me any indication/confirmation that the software was actually "seeing" anything, I just bit the bullet and decided to hit next, at which point the flash tool took off and began flashing, but both the flash tool program itself, and the dialogue boxes that popped up during the process were completely full of question marks.....nothing at all readable. Did you also experience anything like this?
Just figured I'd ask as since I did this to a friend's phone a month or so ago, it's always bugged me as to why it occurred, and so I've been very hesitant to ever use it again should I have to, so I at least wanted to see if I was in the minority on these experiences haha Thanks in advance!
ohlin5 said:
Interesting....well then I'll ask you another couple off topic questions then, since the only experience I had with the kdz method turned out SUPER sketchy haha. So when I started the flash tool program up and began the process of flashing, I had 2 weird occurrences and want to know if you experienced anything similar. The first weird thing that happened is I never had any confirmation that the software was "seeing" the phone as being connected. I don't have it in front of me as I'm at work, but I recall one screen having boxes in the lower left corner that seemed like they should show something if it were seeing a device connected, but they were completely blank - do you know what screen km referring to, and did this happen to you?
And the second thing that happened that about gave me a heart attack (since it was one friend's phone hahaha), was that when I couldn't get those boxes described above to populate and give me an indication/confirmation that the software was "seeing" anything, I just bit the bullet and decided to hit at which point the flash tool took off and began flashing, but both the flash tool program itself, and the dialogue boxes that popped up were completely full of question marks.....nothing at all readable. Did you also experience anything like this?
Just figured I'd ask as since I did this to a friend's phone a month or so ago, it's always bugged me as to why it occurred, and I've been hesitant to ever use it again should I have to, so I am least wanted to see if I was in the minority haha Thanks in advance!
Click to expand...
Click to collapse
Yah, it was sketch. I did see all the ?????? all over the screen but I trusted the directions on the thread.
As far as the software seeing the device, the only indication that I had was the program showing the available memory on the device, so I knew it was reading it.
I did it once, it worked, I'm not really a seasoned flasher. I just got my G3 last week and I had OTAd before rooting and unlocking.
cbrehob said:
Yah, it was sketch. I did see all the ?????? all over the screen but I trusted the directions on the thread.
As far as the software seeing the device, the only indication that I had was the program showing the available memory on the device, so I knew it was reading it.
I did it once, it worked, I'm not really a seasoned flasher. I just got my G3 last week and I had OTAd before rooting and unlocking.
Click to expand...
Click to collapse
Lol well I appreciate your confirmation that I'm not the only one who felt the sketchiness. I never noticed the available memory as being shown, but maybe I overlooked that. And I'm a pretty seasoned flasher, at least as far as custom rom flashing goes, but yeah that process definitely grew a little hair on my knuckles lol. Thanks again!
is 12B even worth upgrading to?
I have been reading alot about the update to 11 and 12B. is it really worth it to upgrade?...I got my phone it had 10B out of the box (I think) and phone immediately said there was an update as I was on my way home from the verizon store, so I thought sure and did the update, got home and started looking into root and realized I had to downgrade to 10 to get root, did it KTZ method, rooted, installed TWRP so I can make backups, and here I am ever since, as far as I can tell from reading is the only thing 12B gives you is advanced calling or whatever it is, I dont really care if I have that, I dont really even care if I have that unless someone can chime in and tell me whats its all about, is it worth upgrading and risking loosing root and stuff just for this advanced calling feature?...what is it and what does it do?
This is VoLTE or Voice over LTE. Someone will correct me if I'm wrong, but it doesn't do anything on the G3 other than allow your voice conversations to travel over the LTE line. This update was required for the Turbo, Sony, and other new phones that could not talk and surf at the same time. The G3 never had that problem.
nice tips, i was at 10b and rooted. i just couldnt take the annoying update available pop up anymore.
so i unrooted, udpated to 12b, then realized i cant root 12b. i just re flashed back to 10b.
my questions:
1) do i root 10b then upgrade to 11c? if so how, this was my original version and my problem was it always failed to update?
2) do i upgrade to 11c first, then root? if so how, i cant find directions to root 11c?
3) once rooted at 11c, how to i upgrade to 12b while keeping the root?
only reason i root is for wifi tethering on a unlimited verizon plan, if there is another way to be updated and have tethering, please share.
thank you.
i am a newbie at rooting, so specific links/steps are appreciated.
Yes. I went from 12 to 10,just follow the instructions.
jadams161 said:
Yes. I went from 12 to 10,just follow the instructions.
Click to expand...
Click to collapse
im not sure if you are trying answering my questions or not. if you are, i am rooted at 10b again. how do i keep my root but update to at least 11c, but preferably 12b?
update, i found a temp solution in another thread thanks to user Wildcat2083 :
I found a useful trick to keep the ota from showing up, if you enter ##3328873 in tge dialer pad and enter 000000 for the service code you then can uncheck the ota-dm mode this should prevent any ota
this at least gets rid of the update pop up. but i would still like to know how to upgrade to 12b well keeping my root.

[Q] LG G3 OTA Updates and Root?

So, I am getting an LG G3 tomorrow.
I already looked up how to downgrade it to 10B, root with Stump or Ioroot, and use Bump! to install TWRP. (Unless the software it comes with will be rootable, but I doubt it. If I am wrong, please let me know!) I obviously don't know everything there is to know, and may have missed some things.
Once I have it rooted.
I upgrade it via OTA keeping root with SuperSU's survival mode.
And it should stay rooted?
Then I use Bump! to flash TWRP into it, or can I do that before and update? I am just getting this phone and I really don't want to mess it up.
Downgrading and rooting it will be no issue, but I am unsure whether I use Bump! to install TWRP before or after updating it OTA.
Or if I should even update it at all and wait until developers say it's okay on the latest software as of Dec. 13th.
I checked around for a good thirty minutes and did not find a clear answer, I am hoping someone can directly clear this up.
I know updating a phone OTA while trying to keep root isn't the smartest thing to do, but if it works then I have the latest software and it's also a rooted device.
Also, the latest software I saw was 12D? Is that it, or is it 11C? I am confused on how the updates are (in the sense of which ones are out for this phone/coming out soon).
In simplicity/TL;DR:
(I did read about my issue, but could not find anything so I asked here!)
Once I downgrade to 10B and root my G3, is it safe to update OTA and keep root? (With SuperSU Survival Mode I'd assume.)
If so, should I flash TWRP with Bump! before or after the updates?
- If after, what should I do? Reflash completely back to 10B?
What is the latest released update for the G3 (Verizon - VS985)?
- Is there a new update coming soon?
Do the updates actually help the phone performance and fix issues without me doing anything to improve performance and fix issues myself?
Thanks!
Ariac Konrel said:
So, I am getting an LG G3 tomorrow.
I already looked up how to downgrade it to 10B, root with Stump or Ioroot, and use Bump! to install TWRP. (Unless the software it comes with will be rootable, but I doubt it. If I am wrong, please let me know!) I obviously don't know everything there is to know, and may have missed some things.
Once I have it rooted.
I upgrade it via OTA keeping root with SuperSU's survival mode.
And it should stay rooted?
Then I use Bump! to flash TWRP into it, or can I do that before and update? I am just getting this phone and I really don't want to mess it up.
Downgrading and rooting it will be no issue, but I am unsure whether I use Bump! to install TWRP before or after updating it OTA.
Or if I should even update it at all and wait until developers say it's okay on the latest software as of Dec. 13th.
I checked around for a good thirty minutes and did not find a clear answer, I am hoping someone can directly clear this up.
I know updating a phone OTA while trying to keep root isn't the smartest thing to do, but if it works then I have the latest software and it's also a rooted device.
Also, the latest software I saw was 12D? Is that it, or is it 11C? I am confused on how the updates are (in the sense of which ones are out for this phone/coming out soon).
In simplicity/TL;DR:
(I did read about my issue, but could not find anything so I asked here!)
Once I downgrade to 10B and root my G3, is it safe to update OTA and keep root? (With SuperSU Survival Mode I'd assume.)yes
If so, should I flash TWRP with Bump! before or after the updates?after, or you will get stuck in recovery
- If after, what should I do? Reflash completely back to 10B?no, just flash twrp after updating
What is the latest released update for the G3 (Verizon - VS985)?12b
- Is there a new update coming soon?unlikely anyone can answer this
Do the updates actually help the phone performance not really and fix issues other than lag im not sure what needs to be fixed without me doing anything to improve performance and fix issues myself? for the most part, you will need to tweek and mod yourself to improve performance and fix issues such as lag
Thanks!
Click to expand...
Click to collapse
in red above
One more thing...
When I am updating and another software update is released, I will have TWRP flashed.
Updating it will cause a bootloop.
How can I prevent that?
Using titanium backup (TiBU) or similar program, freeze the app called "System updates 1_...". For me this has worked, though some people seem to still have issues; I'm trying to figure out if it is a TiBU problem or if they have accidentally frozen the wrong thing.
Alternative is to go to /system/app and rename the two LGDMSClient files, add a .bak to the end of the names, then restart.
See this post: http://forum.xda-developers.com/showthread.php?p=56061720
Copy the zip in the first post onto your phone. If you accidentally do get an ota after you have a custom recovery, tell twrp to Install that zip
file. It will flush the ota from your system, so you aren't such buying to recovery.
HTH!
Fwiw I just got a new G3 and it came with 10B
Doh...
BladeRunner said:
Fwiw I just got a new G3 and it came with 10B
Click to expand...
Click to collapse
Lucky....12b here
rensmooth said:
Lucky....12b here
Click to expand...
Click to collapse
You DO know that you can downgrade back to 10b to root and bump, correct? Just use KDZ or TOT files.
That was one of the other things I researched before getting this phone. Luckily, it came with 10B, but I'm on 12b, rooted and bumped.
Yes thanks. Just preparing everything. I had LG usb driver issue,resolved now with latest from LG. Now downloading 10b TOT. Too many years getting comfortable rooting HTC 's lol.
rensmooth said:
Yes thanks. Just preparing everything. I had LG usb driver issue,resolved now with latest from LG. Now downloading 10b TOT. Too many years getting comfortable rooting HTC 's lol.
Click to expand...
Click to collapse
I know the feeling. For the past 3 three years, I was on Motorola phones, so there was a lot of FXZ files and fastboot flashing for me. Switching to LG meant learning that all over again.
New Question
Here, if any of you know the answer.
http://forum.xda-developers.com/verizon-lg-g3/help/lg-g3-overheating-issues-t2975509
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
manchucka said:
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
Click to expand...
Click to collapse
That I don't know about, since the two tools to flash the TOT and KDZ files are windows based.
Not sure if you could get them to run via Wine or something, but that might be an option, but since it also requires all the drivers and such, I have no idea how/if that would work and wouldn't even know how to start to set that up.
On motorola phones, you could use the fastboot command line tool that comes with the Android SDK and drivers, so that was nice.
But to take the TOT and KDZ files and flash them under Linux, I have no idea.
I got my phone on 11b, and downgraded it.
Used the Stump root, and then I used Bump! to install TWRP.
Forgot to do the updates, oh well another day.
They're not that important., right?
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
markfm said:
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
Click to expand...
Click to collapse
Advanced calling does nothing for me because I believe it's an extra charge on your bill for it. Forget that!
AC 1.0 is no added charge. HD voice is billed the same as any other call. The video part of a video call gets booked against your data plan (I'm grandfathered Unlimited), and free if it goes over WiFi.
manchucka said:
Still looking for a way to downgrade with wither OS X or Linux, my only two options.
Click to expand...
Click to collapse
If I was you. I would get me an older used Win7 Laptop if you want to flash phones. Will make your life easier...
help
markfm said:
It's often handy to update modem, to pick up any enhancements on the rf side, the sw that actually talks to the cell tower.
I also ended up updating to the 11c boot, and the 12b system. IMG. 12b system picks up Verizon's first VoLTE, what they call Advanced Calling 1.0.
I did the above by using autoprime's flash2xxx zip files, and the .IMG files.
Click to expand...
Click to collapse
can you please show me how to this my phone got stuck tryin to go to 11c
In the Verizon g3 General section, stickies, bweN diorD has a reference thread. He has links to the various images, and to a thread on using flash2.
one click root
BladeRunner said:
Fwiw I just got a new G3 and it came with 10B
Click to expand...
Click to collapse
This is the second G3 I have purchased. I Suggest using one click root to root. Also stop and Phil's can be flashed using flashing. It seems easier to me dealing with image rather than zip. I've foremost roms and so far my experience has me favoring Bliss Pop. That is what I am running now and to be honest I think I'm going back to 10b. The customizations are nice but to me it's not worth the problems associated with L.P. My opinion Bliss Pop has the best handle on the problems and still too much for me. I'm going to give LP a few months for the developers fix all bugs. Verizon hasn't released LP yet and there is reason behind that other than being big bully carrier. Once again my opinion only. You picked a great phone that is for sure!

Still worth buying LG G3

The wife wants to update to new phone. Can the verizon LG G3 as of right now 01-25-15, be rooted and bootloader unlocked or is a lost cause being verizon? Thanks for any tips.
kgirlx said:
The wife wants to update to new phone. Can the verizon LG G3 as of right now 01-25-15, be rooted and bootloader unlocked or is a lost cause being verizon? Thanks for any tips.
Click to expand...
Click to collapse
You are still good to go. Depending on which firmware it has you might have to downgrade to root and unlock, but there are some pretty good guides on how to do that in this forum.
BladeRunner said:
You are still good to go. Depending on which firmware it has you might have to downgrade to root and unlock, but there are some pretty good guides on how to do that in this forum.
Click to expand...
Click to collapse
OK, so I would have to downgrade possibly. I just hate having to go backwards but, if that's what it takes to root and unlock. Would you happen to know which firmware is it that has to go back to root and such. We are both on Galaxy s3, she's wants new, I'm fine with my rooted and unlocked gs3, I actually thought about the n6, but who knows own. THANKS.
kgirlx said:
OK, so I would have to downgrade possibly. I just hate having to go backwards but, if that's what it takes to root and unlock. Would you happen to know which firmware is it that has to go back to root and such. We are both on Galaxy s3, she's wants new, I'm fine with my rooted and unlocked gs3, I actually thought about the n6, but who knows own. THANKS.
Click to expand...
Click to collapse
10b is what you want to be on. Once you root that and installed the bumped twrp its easy to flash an updated stock and an updated modem to get back on the latest update.
I got mine back in December and it was still on 10b. I didn't have to downgrade.
I am running 12b right now via Eclipse ROM. Fantastic!
kgirlx said:
OK, so I would have to downgrade possibly. I just hate having to go backwards but, if that's what it takes to root and unlock. Would you happen to know which firmware is it that has to go back to root and such. We are both on Galaxy s3, she's wants new, I'm fine with my rooted and unlocked gs3, I actually thought about the n6, but who knows own. THANKS.
Click to expand...
Click to collapse
Once you are rooted, you can retain root through the updates. So you can root, update, then install twrp if you like. From there you can backup your stock abd mess around with whatever custom roms you like.
read my post under general and flash tool thread last week w links
its easy, I was in your shoes 2 or 3 weeks ago. read my post under general and the flash tool thread = basically 10 minutes total = If I remember correctly just instal LG drivers onto Windows, open flash tool folder, click and drag 10b file to flash folder, run, Root w stump via hard method when it says phone not ssupported/ use hard crack method or whatever is says (forgot) or ioroot, supersu & twrp via play store apps is easy on LG g3. Save twrp restore state on sd, then use 12b file I linked, I love it! My wife will not get a Samsung next time, this thing is awesome due to less big brother and more friendly focus on hardware vs locking u out. Fyi the screen is not dim in the Sun as reviews always said.
kgirlx said:
OK, so I would have to downgrade possibly. I just hate having to go backwards but, if that's what it takes to root and unlock. Would you happen to know which firmware is it that has to go back to root and such. We are both on Galaxy s3, she's wants new, I'm fine with my rooted and unlocked gs3, I actually thought about the n6, but who knows own. THANKS.
Click to expand...
Click to collapse
I got mine a week ago and it came with 10b
Sent from my VS985 4G using XDA Free mobile app

[Q] got new g3 in mail

i got my g3 in mail today. looks a great phone in hand. just make sure this is the proper thing i m going to do to flash some rom. current software build is 11c. it needs to downgrade to 10b with kdz method. stump root then. install twrp recovery with flashify. then i could pick any rom i like to flash? is there anything wrong or i missed? anything i need to take care during flashing rom?
thank you for the advice.
Sounds about right.
Unless you want to run plain stock for some reason, then don't use the kdz to downgrade. I downgraded using the stock 10b, rooted and then took each OTA making sure SU had keep root checked. I have a rooted stock 11C nandroid just in case I want it. Just a thought.
Schaweet said:
Unless you want to run plain stock for some reason, then don't use the kdz to downgrade. I downgraded using the stock 10b, rooted and then took each OTA making sure SU had keep root checked. I have a rooted stock 11C nandroid just in case I want it. Just a thought.
Click to expand...
Click to collapse
downgrading with the kdz method you'd still be able to update by flashing the stock rooted 11c & 12b and the appropriate modem.
BladeRunner said:
downgrading with the kdz method you'd still be able to update by flashing the stock rooted 11c & 12b and the appropriate modem.
Click to expand...
Click to collapse
Sure but you wouldn't be able to take an OTA which some people like to do. Plus, can you get the VoLTE update on the VZW model? Not sure.
Anyway, to not have to worry about flashing separate modems, it's not really a huge deal to downgrade with the stock files.
Either way works which is why Android rocks. Options!

Categories

Resources