Yesterday i rooted my htc wildfire s A120b model. Then after rooting i deleted the unwanted files . Accidently , i deleted system files . THis caused continious restarting of the phone. I then used power+ vol down key and did factory reset. Then after doing factory reset the device works
"only once" but you cannot access the home screen only notification bar (which gives acess to settings wifi etc). till the display is on the phone works then if the display is timeout or press power key it goes on continious restart again and you have to repeat the same process of factory reset.
even in recovery mode it gives red exclamation sign. and says e: cant open /recovery / command something like that
now my question is
Is there any way to get the deleted system files via usb cable connecting the pc?
plz help
sameep007 said:
Yesterday i rooted my htc wildfire s A120b model. Then after rooting i deleted the unwanted files . Accidently , i deleted system files . THis caused continious restarting of the phone. I then used power+ vol down key and did factory reset. Then after doing factory reset the device works
"only once" but you cannot access the home screen only notification bar (which gives acess to settings wifi etc). till the display is on the phone works then if the display is timeout or press power key it goes on continious restart again and you have to repeat the same process of factory reset.
even in recovery mode it gives red exclamation sign. and says e: cant open /recovery / command something like that
now my question is
Is there any way to get the deleted system files via usb cable connecting the pc?
plz help
Click to expand...
Click to collapse
A factory reset would not restore missing system files. It only wipes user data. It sounds like you don't have a custom recovery either so your only options are:
Unlock the bootloader and install a custom recovery and flash a rom
Run the RUU to restore the phone to stock
There aren't going to be any options to keep your data unless you enabled USB Debugging on the phone and the computer is able to recognize / access it.
Related
I HAVE THE SPRINT TOUCH PRO STOCK ROM.
A WHILE AGO I REGRETABLY INSTALLED [ezInput 2.1]
[http://mylostblog.altervista.org/software/freeware/per-htc/htc-freeware-htc-keyboard-ezinput-21]
WHEN I DID THE SOFT RESET MY DEVICE GOT STUCK ON THE "TOUCH PRO SCREEN WITH Rom/Radio... info at the bottom.
I've tried several different things to try and make it work.
1. took out the battery and restart.
2. take out the memory card (where i installed) then baterry and restart
3. tried to connect to laptop (nothing)
notes: power button doesn't do anything
when i call my phone the LED light flickers for incoming call,
but, cannot answer.
tried searching for solutions on xda
http://forum.xda-developers.com/showthread.php?t=446719
i dont have "insurance" so i just cant get a new one
CAN ANYONE HELP ME WITH THIS PROBLEM???
NEW MESSAGE POPPED UP: the device is unable to boot beacuse either you have turned off the device incorrectly or tried to install an application from an untrusted source. press the volume up to reset your device or press any other button to cancel. this operation will delete all your personal data and restore the device to its factory settings.
You have to hard reset the device, like the message stated. If that doesn't do the trick, boot it in tricolor mode and reflash the ROM.
<SOLVED>
Problem solved. Factory reset. Good thing i had back-up.
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
accurato said:
what I'm getting when try Raphael_CDMA_HSPL_037/or relocker is "error 262 communication error" after it hangs at 0%. I'm using vista 64 and i am using the same cable and port that was used to unlock the phone flash it a second time successfully but not the third so i dont think it's the cable. If i try to load from sd card just hangs at 0%. I have tried the following:
Bell Stock ROM TP
Bell_Elite_RC1_RC1_21234_20090624
task29 Sprint v1.12.34F
Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship
Raphael_CDMA_Relocker
Raphael_CDMA_HSPL_037
They load alright get to the page where it shows my current image version, and it is blank. I pick the version to update it starts, phone and comp switch to loading screen and it stay's at 0%. After a while it now comes up with an error that say's ERROR (294) : INVALID VENDOR ID. Near the exit button just above the exit button is a code
B a3-RBRK<567-SQEVc568-RBRK<5670 if that can help in any way.
Only Hermann_C_SPRINT_WWE_1.03.651.3_RS1.03.15F_SPCS_1. 53_PRL6063_Ship gets to 1% before it goes into the reboot startup loop where all i see the the touch pro screen then reboots, all the others just stay at 0% with the error above .
These are just a few i have tried MightyROM4_06.20.09_Herman, task29 and others but it just wont sync up. Although it say's usb on phone and they do seem to start to sync when i first plug in the phone using the usb my mobile sync center does not recognize the phone nor can i access any of the files because it's not on my list under comp. So this is what a brick looks like.
Any ideas would be greatly appreciated
Click to expand...
Click to collapse
You may need to reset your device. Reset (or normal) software on your device deletes all active program memory and close all active programs. This can be useful when your device is running slower than normal, or programs that are not performing well. Soft reset is required after installation of some programs. If a soft reset when the program is running, unsaved work
will be lost.
To perform a soft reset
1. Pull out the stylus.
2. Use the stylus tip to press the RESET button located at the bottom of the device. Your device restarts and go to the boot loader and reflash with an official ROM for your device !! if the problem continues try to hard reset A hardreset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Warning! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset.jika problem continues try to hard reset A hard
reset should only be performed if a normal reset does not solve the system
problem. After a hard reset, the device is returned to the default settings-
that way when you first bought and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile ® software and other pre-installed programs will remain.
Important! Your device will be set back to factory default settings. Ensure that all additional installed programs and / or user data have been supported before you do a hard reset. To perform a hard reset
1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and ENTER buttons, then press the RESET button with the stylus tip.
3. Release the RESET button, but continue pressing the VOLUME DOWN and ENTER buttons until you see this message on the screen:
4. Release the VOLUME DOWN and ENTER buttons, then press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Clear Storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes. and try to re-Flash again !!!! I hope you succeed
I have tried the hard reset also but with no luck. I think the op system is corrupt. Even from the SD card it just hangs at 0% they all do. I am using the same comp. and cable that was used to flash it the first time with positive results. The hard reset works it loads then goes into touchpro loop on startup.
Hey guys, I have a Star A2000 with Froyo rooted. While I was trying to modify my original status bar, the phone blocked and I had to reboot it. I rebooted it but for over one hour it's loading whithout booting into the homescreen. I tryed with the factory reset but nothing. I can't load any rom from Linux, and so I can't fully on the device. Any suggestion? I want to bring back everything! Anybody knows how I can do so? Without the flashing cable is it possible to restore or put back the original system and settings?
recovery menu
Turn off the phone
press vol up and power button in the same time
that will bring you to the recovery menu - press home key to see options
navigate trough options with vol up and down and meniu
take care - reset to factory my wipe your imei off. if you are lucky this might not happen
also read here:http://forum.xda-developers.com/wiki/index.php?title=Chinese_Clones_MTK6516
I've tried this way all the time but it seems to don't work
Is there not an update.zip in other to install the original rom? Because I'm not with the flashing cable so I can't use it to flash. Is there any other way I can do it?
If you cant access the recovery by using power button + volume up key at the same time when turning on the phone then the recovery partition is not working (should show up with android ! screen or custom recovery) - If you cant boot in to the recovery menu or the system partition containing the OS you have likely bricked your phone, the only chance you may have in my opinion is a factory reset - which you say has failed or connect usb while phone is booting and hope you can get an ADB connection (which is possible due to a bug but only seems to work intermittantly - I have managed to fix a brick via this stroke of luck before)
Having a backup as well as a working recovery or system partition is the key to playing with your phone - one partition should always be working to restore the other when or if it fails.
[email protected] said:
If you cant access the recovery by using power button + volume up key at the same time when turning on the phone then the recovery partition is not working (should show up with android ! screen or custom recovery) - If you cant boot in to the recovery menu or the system partition containing the OS you have likely bricked your phone, the only chance you may have in my opinion is a factory reset - which you say has failed or connect usb while phone is booting and hope you can get an ADB connection (which is possible due to a bug but only seems to work intermittantly - I have managed to fix a brick via this stroke of luck before)
Having a backup as well as a working recovery or system partition is the key to playing with your phone - one partition should always be working to restore the other when or if it fails.
Click to expand...
Click to collapse
HI !
I´m on the same situation.
After install de CW recovery, made 3 nandroid backups of different states of my phone and tryed to flash 3 different ROM MODs (including the ICS 4, hahaha) i bricked my A2000-GPS.
I´m able to enter CW recovery menu using PWR+VOL.UP and navigate as well. I wiped all data, cache partition and try to restore all my backups one by one... Nothing brings back my OS... I still stucked into boot screen (the first one, i´m not entering in the boot_logo image...
After many tryes, i wiped all data again and made a factory reset using CW recory: Nothing...
I notice that i´m loose the factory recovery mode (PWR + VOL.Down)... And i also never made an IMEI backup. Could be that?
I apreciate any help. Any light in the end of tunel, hahaha
Kind regards!
------------------------------
Updating:
- I´m using the ClockworkMod Recovery V4.0.0.5.
- My CWM recovery is able to read my SD card, so i can put any .img or .zip file inside it.
I format the folders:
/boot
/cache
/data
/system
Into "Mounts ans Storage" menu.
After I recovery one of my nandroid backups. Normal rebooting and.........................
NOTHING ! I´m still stucked into first boot img.
It´s normal this screen delays like 15 ~ 20min. to disapear?
Hi.
related with CWM I also have a weird issue.
My wife's old A2000 is now in my hands to play with it. The phone was virgin (stock rom no rooted).
I rooted the phone and installed cwm/rom manager.
The weird issue is:
1) If I click in Rom Manager option " Reboot into CWM" the phone reboot in CWM with all options working including rom backup.
2) starting with th phone off I press the keys power + vol.up Iget not the CWM but the "fatory Mode" green menu with 6 options (Full test, Test Report, Clear flash, version and Reboot).
3) pressing power + vol.down it simply boot normay the system.
What can be wrong with this "ex-virgin" A2000?
I have Samsung Galaxy Ace (GTS-5830i). Last week, while checking my emails, it got hanged. I tried a lot but no button was working (responding). So, I restarted it by removing-fix again the battery. But when I restarted it, it gave multiple error windows regarding all the backend processes being interrupted unexpectedly. I took it to Samsung Service Center, but technician there denied doing anything, since the phone was brought from abroad and it was Made in Vietnam piece. He told me to send the phone to the country from where it was bought. I took it to one friend technician, but even he told me the same.
Then I thought of format the phone myself with idea that it might make things like before, but even that option was not working. So I tried it to format by pressing Volume Up/Down+Power+Home Buttons together. The phone started with a window just like DOS Prompt in computers. It had 4 options:
Reboot system now
Apply update from sd card
Wipe data/factory reset
Wipe cache partition
I selected 3rd one i.e. wipe data/factory reset.
It took me to another window saying, “Confirm wipe of all user data? This can’t be undone. I selected:
Yes –delete all user data
Then I rebooted it.
Now it is just starting again and again with the phone name and model number (as it comes when we start a phone). It is switching on-off by itself and it is going on.
I tried to connect the phone to laptop through Kies, but was able to connect only once after numerous attempts, and that showed that there is no firmware in the phone!
I googled the problem and got a probable solution by putting back the firmware using Odin software and the firmware file. I downloaded these from net. But the instructions to use Odin software are:
Open phone Settings>Applications> Development and enable USB Debugging.
Installing Stock Gingerbread Firmware Turn off you phone and boot it into Download mode: hold down the Volume Down + Volume Up buttons, then long press the Power key till the your phone’s screen turns up and you see the Download mode screen.
Since, I can’t even switch on phone and access anything on it; I can’t follow these instructions and use this software because it is switching on-off again and again by itself.
Please help.
Go HERE Nothing to worry about USB debuging Just Follow that Thread
Are you able to going in DOWNLOAD mode by pressing power + Vol Up + Vol down.
If it is possible then read this post http://forum.xda-developers.com/showthread.php?t=1552792
It may help you.
m.i.khilji said:
I have Samsung Galaxy Ace (GTS-5830i). Last week, while checking my emails, it got hanged. I tried a lot but no button was working (responding). So, I restarted it by removing-fix again the battery. But when I restarted it, it gave multiple error windows regarding all the backend processes being interrupted unexpectedly. I took it to Samsung Service Center, but technician there denied doing anything, since the phone was brought from abroad and it was Made in Vietnam piece. He told me to send the phone to the country from where it was bought. I took it to one friend technician, but even he told me the same.
Then I thought of format the phone myself with idea that it might make things like before, but even that option was not working. So I tried it to format by pressing Volume Up/Down+Power+Home Buttons together. The phone started with a window just like DOS Prompt in computers. It had 4 options:
Reboot system now
Apply update from sd card
Wipe data/factory reset
Wipe cache partition
I selected 3rd one i.e. wipe data/factory reset.
It took me to another window saying, “Confirm wipe of all user data? This can’t be undone. I selected:
Yes –delete all user data
Then I rebooted it.
Now it is just starting again and again with the phone name and model number (as it comes when we start a phone). It is switching on-off by itself and it is going on.
I tried to connect the phone to laptop through Kies, but was able to connect only once after numerous attempts, and that showed that there is no firmware in the phone!
I googled the problem and got a probable solution by putting back the firmware using Odin software and the firmware file. I downloaded these from net. But the instructions to use Odin software are:
Open phone Settings>Applications> Development and enable USB Debugging.
Installing Stock Gingerbread Firmware Turn off you phone and boot it into Download mode: hold down the Volume Down + Volume Up buttons, then long press the Power key till the your phone’s screen turns up and you see the Download mode screen.
Since, I can’t even switch on phone and access anything on it; I can’t follow these instructions and use this software because it is switching on-off again and again by itself.
Please help.
Click to expand...
Click to collapse
Hi I have a LG F100S (LG OPTIMUS VU)
The phone is restarting itself sometimes and after uninstalling programs and files the programs and files are coming back. I also tried uninstalling from google play but programs keep coming back. Also my phone is giving warning as Unfortunately xxx. program.stopped.
I tried safe boot by pressing long to turn off and the device asked me to confirm safe boot but the restart was not in safe boot.
I moved the battery and placed it back (the battery is not removable its attached with a screw)
I try factroy reset from the app menu but it didnt worked as well.
I tried to delete files from settings / storage but files came back.
I tried to hard reset by key combination but i recieved the dead android robot with a caution mark in a triangle in his chest.
I tried to go in to recovery menu by pressing home touch button and I have the Android system Recovery 3e screen as:
Volume up/down to move highlight:
enter button to select
reboot sytem now
apply update from ADB
wipe data/factory reset
wipe cache partition
I can highlight these options with volume keys where as I cant select it. I tried all of the buttons on my phone but can not be able to select any of these options.
My phone is not rooted. I also used LG Mobile Support tool to update my firmware from V40C to V40E the process done without anyproblems but when the phone restarted the firmware was same V40C.
My problem is my phone seem to be in a kind of boot loop. Maybe the clean master is causing the problem or some other software
I can use my phone for hours only I am receiving unfortunatelly.xxx.program.stopped. and I cant unistall programs or dlete files or install new programs.
hope I can take some help.
Note I searched the google and XDA for a solution but there was no helpful answer.