S7262 after flash blank lcd and no light - Android Q&A, Help & Troubleshooting

phone was with pattern lock , i flashed CSC file and phone gone to white display then i flashed with a file(S7262JVUANB) which before this it was repairing white screen but after flash now phone is in blank lcd (no light), but when i write that CSC file phone goes to white screen

me also same issue , please suggest solution ....
solution found
just flash phone with this S7262JVUAOK1
Download and extract/unzip the firmware file
Download and extract Odin v3.12.3 ZIP file
Open Odin v3.12.3 software
Reboot device in Download Mode (hold Home + Power + Volume Down)
Connect device and wait for "ID: COM" to turn blue in Odin
Add the downloaded firmware file to AP/DPA
Make sure "Re-Partition" is NOT ticked
Click the "Start" button to begin the installation process

p4pentium4 said:
solution found
how do you got to download mode i can't see anything "i know power+ home+down" but when i press then nothing happen "even after pressing vol up
could u tell how do u did it "pressed for how long and did u pressed vol up" ...
Click to expand...
Click to collapse

bishoy ashraf said:
solution found
how do you got to download mode i can't see anything "i know power+ home+down" but when i press then nothing happen "even after pressing vol up
could u tell how do u did it "pressed for how long and did u pressed vol up" ...
Click to expand...
Click to collapse
that you have to do it properly ,
thing is u have to assume , once it is in download mode you can see it in odin as COM Port detection .
Best of luck !!!!!!

p4pentium4 said:
me also same issue , please suggest solution ....
solution found
just flash phone with this S7262JVUAOK1
Download and extract/unzip the firmware file
Download and extract Odin v3.12.3 ZIP file
Open Odin v3.12.3 software
Reboot device in Download Mode (hold Home + Power + Volume Down)
Connect device and wait for "ID: COM" to turn blue in Odin
Add the downloaded firmware file to AP/DPA
Make sure "Re-Partition" is NOT ticked
Click the "Start" button to begin the installation process
Click to expand...
Click to collapse
Thank you. It works

Related

[Q] Need files to update firmware

My Galaxy Tab 10.1 with Android 3.2 is stuck on the Samsung Galaxy Tab screen. I figured if I try to change/update the firmware I might be able to get past it. I tried so many different things to fix this using Odin. I found an article with these steps:
Firmware Update Steps:
Run Samsung P7510 Downloader.
Check these options: Re-Partition, Auto Reboot, F.Reset Time.
Click PIT button and select: android_fastboot_emmc_full_p4_16G_32G.pit
Put the Tablet into dwonload mode: ( Press Volume Down + Power for 10 sec ) then press Volume Up to enter Dwonload mode.
Connect USB cable to phone and PC.
Make sure that the program has detect the phone.
Click Start button to flash PIT file and wait to see PASS! word on the program.
Now click on Reset button and uncheck this option: Re-Partition.
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
Remove battery off and reinsert it then put the phone into download mode again.
Connect USB cable to phone and PC.
Make sure that the program has detect the phone.
Click Start button to and wait to see PASS! word on the program.
After phone rebooted do full reset by this code: *2767*3855#
My dilema, where do I get the necessary files. I searched and all I keep getting are more links with the same instructions and file names. If I can fix the issue without doing the update, that would be awesome. I messed up when I tried to put a ROM with ICS on it, this one (AOKP_ICSROM/aokp_p4wifi_milestone).....Please help.
When you get stuck at that screen all you need to do is boot into recovery, wipe data/cache/dalvik then reflash the rom. Just happened to me with an ICS rom too.
Sent from my GT-P7510 using xda premium
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
If you still have a good image on your tablet you can indeed boot into recovery and reinstall that one:
- hold left volume button down while booting
- Now you should enter a menu, left for flashmenu, right for odin download mode
- press left volume button to select flash menu
- press right volume button to select
- wipe data/factory reset
- install zip from sdcard
If you do not have a correct firmware file on your device download it here:
samsung-updates.com/gt-p7500-galaxy-tab-10-1/
(you can find which one you need here:
androidromupdate.com/2012/02/17/samsung-galaxy-tab-10-1-3g-p7500-firmware-updates-kies-official-releases-list/ )
now follow this guide:
forum.xda-developers.com/showthread.php?t=911228
suc6
Bootloader, pda,csc
From Where do i download the files....
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
jugalkalyani said:
From Where do i download the files....
Click BOOTLOADER button and select: BOOTLOADER_P7510xxxxx_CL317542.tar.md5
Click PDA button and select: CODE_P7510xxxxx_CL317542_REV00_user_low_ship.tar.md5
Click CSC button and select: CSC_P7510Oxxxxx.tar.md5
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1651794 see what you can find there

Screwed my s2!!! help

I was on resurrection rom and I did a factory reset to erase everything on my phone. Now the phone doesn't load up at all.
I hold power and volume up but nothing happens.
However, I can hold volume down and power button and it loads a message about a custom os.
Volume up continue
Volume down restart phone
When I press volume up
Goes to a screen with the following
Odin mode
Product name gt i19100
Custom binary download no
Current binary Samsung official
The android mascot
And underneath says downloading do not turn off target
Please help!
rirawin said:
I was on resurrection rom and I did a factory reset to erase everything on my phone. Now the phone doesn't load up at all.
I hold power and volume up but nothing happens.
However, I can hold volume down and power button and it loads a message about a custom os.
Volume up continue
Volume down restart phone
When I press volume up
Goes to a screen with the following
Odin mode
Product name gt i19100
Custom binary download no
Current binary Samsung official
The android mascot
And underneath says downloading do not turn off target
Please help!
Click to expand...
Click to collapse
Also if I just reboot it it goes to the Samsung logo and then a black screen then after a few minutes it flashes white
rirawin said:
I was on resurrection rom and I did a factory reset to erase everything on my phone. Now the phone doesn't load up at all.
I hold power and volume up but nothing happens.
However, I can hold volume down and power button and it loads a message about a custom os.
Volume up continue
Volume down restart phone
When I press volume up
Goes to a screen with the following
Odin mode
Product name gt i19100
Custom binary download no
Current binary Samsung official
The android mascot
And underneath says downloading do not turn off target
Please help!
Click to expand...
Click to collapse
So that means you can get into download mode, which is a good thing. Go to www.sammobile.com, signup and enter you device and model number, download a stock firmware and flash through odin. Do NOT tick repartition or use a .pit file. Put it in the PDA and flash.
kilometers4 said:
So that means you can get into download mode, which is a good thing. Go to www.sammobile.com, signup and enter you device and model number, download a stock firmware and flash through odin. Do NOT tick repartition or use a .pit file. Put it in the PDA and flash.
Click to expand...
Click to collapse
Is there a guide please because I have clue and I'm stressing out with worry.
rirawin said:
Is there a guide please because I have clue and I'm stressing out with worry.
Click to expand...
Click to collapse
Its not that hard of a fix, I just explained how to fix your problem. If you want search the forum about how to fix a bootloop...
Also which carrier do I choose from?
Because it was locked to tmobile but I got it unlocked and I'm now on giff gaff so do I still pick tmobile?
rirawin said:
Also which carrier do I choose from?
Because it was locked to tmobile but I got it unlocked and I'm now on giff gaff so do I still pick tmobile?
Click to expand...
Click to collapse
Doesnt matter, you can flash the giff gaff one
Just done it but its stuck at the Samsung S2 logo with the s animation if that makes sense?
OK got it working, phew.
Thank you

[Q] Cant enter download mode

Hi Guys
I flashed my phone awhile bk with XXELLB/A off sammobile. I have now decided to root my s3. I hold Home,Vol + then power., it enter recovery mode, not download mode and therefore odin isnt picking my phone up. If i boot into android connect my phone up, Odin picks it up etc but obviously am unable to do anything further.
Any suggestions as to what i can do?:crying:
travismailsa said:
Hi Guys
I flashed my phone awhile bk with XXELLB/A off sammobile. I have now decided to root my s3. I hold Home,Vol + then power., it enter recovery mode, not download mode and therefore odin isnt picking my phone up. If i boot into android connect my phone up, Odin picks it up etc but obviously am unable to do anything further.
Any suggestions as to what i can do?:crying:
Click to expand...
Click to collapse
Download mode is Volume down + Power + Home
zoot1 said:
Download mode is Volume down + Power + Home
Click to expand...
Click to collapse
That takes me into some weird "recovery mode" where by odin doesnt read the phone. Not into "download mode"
travismailsa said:
That takes me into some weird "recovery mode" where by odin doesnt read the phone. Not into "download mode"
Click to expand...
Click to collapse
Press volume up once you are in download mode
I'm guessing you didn't read what that "weird" recovery screen said
slaphead20 said:
Press volume up once you are in download mode
I'm guessing you didn't read what that "weird" recovery screen said
Click to expand...
Click to collapse
heres a picture taken with another stock S3 with the same issue.
*image-share.com/upload/2121/298.jpg
add the www as im not allowed to post outside links yet
That is stock recovery, you need volume DOWN/home/power, and keep holding them
travismailsa said:
heres a picture taken with another stock S3 with the same issue.
*image-share.com/upload/2121/298.jpg
add the www as im not allowed to post outside links yet
Click to expand...
Click to collapse
You entering into stock recovery by pressing vol up+Power+home..
You need to press Vol Down+Power+Home..
Check out the videos in this thread if you don't know how to press a button..
http://forum.xda-developers.com/showthread.php?t=1655397&highlight=totallydubbed

GT-S5830i not booting - after SAMSUNG logo

Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
I had a similar issue(more than once) and in my case I split the myFirmware file into it's 3 individual parts using Cygwin and SplitFUS2 and flashed from that with Odin 1.85. You could do this with FW file S5830IJPLK1_S5830IOJPLI1_XSG. I also used the pit file(cooperve_0623.pit), but I'm not sure if it was required but point is, it worked.
I also got out of trouble with the use of a backup which although not solid did get me out of trouble. The backup would not restore so I loaded ClockWorkMod recovery and in advanced restore, restored the system folder from my backup, this worked and got me into the phone. However you may not have a backup.
shijopj2012 said:
Dear friends and experts,
I need your help to solve problem with my GT-S5830i. When power on the phone start up and SAMSUNG logo will come but it will not open the phone.... again the SAMSUNG logo comes and repeats the same. My phone is middle east version and I downloaded the firmware from official site which is S5830IJPLK1_S5830IOJPLI1_XSG. Flashed as per the instruction in the official site by using Odin3_v3.09. Connected and added successfully but after sometimes shows failed. Please see the attached screen shot. I hope some one can help me to unbrick this phone.
NB: I tried the same with Odin3_v3.07 and it was success. Still the phone continous to behave the same way.
PLease see the attached.
thanks in advance
SHIJO
Click to expand...
Click to collapse
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
[email protected] said:
try using odin v1.85 and after flashing completes wipe the data and the cache using stock recovery and reboot
HOPE IT HELPS!
Click to expand...
Click to collapse
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
shijopj2012 said:
I tried with Odin 1.85 and it also shows failed. please see the attached screen shot.
thanks,
SHIJO
Click to expand...
Click to collapse
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Go to this link and download stock rom.
www.mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2.zip
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
shijopj2012 said:
Thanks a lot for the reply.. I will try it today and tell you the result.. Appreciates
regads,
Click to expand...
Click to collapse
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Do a "Wipe data/ factory reset" from the stock recovery mod and reboot. That should solve it. Hope I Helped
shijopj2012 said:
I flashed the phone by your steps and it shows passed. PLease see attached image. But still the SAMSUNG logo is coming and going and the phone is not booting to normal screen...
regards,
SHIJO
Click to expand...
Click to collapse
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Take your battery out of
your phone, and again insert it and enter into
the download mode by pressing Volume
down + Home + Power button. If your phone
doesn't enters the download mode don't
worry. Connect your phone with PC by USB
cable and open the Odin V1.85 in your PC.
After opening the Odin, Now press V olume
Up + Volume Down + Power Button . Your
phone will now boot in recovery mode by
Odin. After entering into the download mode,
it asks to press Volume Up button, Press it.
Now you're in the download mode by Odin.
While, the Odin running in your PC must
have recognized in your PC. Now select the
Pit Option, and select the .pit file that you
have downloaded with the Odin .zip file .
Now extract the stock ROM file in your
desktop. Then open the Odin. Now you've
selected the .pit file, now leave the boot
loader blank. And select the "PDA " option
and select the file that is named similar to
PDA that you've extracted in the desktop.
And now select the "Phone" and select the
file that is named similar to "MODEM" . Now
select the CSC and select the file name
similar to "CSC" and select it.
Now the Part is over. Just click the Start
Button , and it will be flashing the Stock ROM
on your Samsung Galaxy Ace S5830i. Wait
for 5 Minutes, once it is complete. Unplug
the USB cabel, and boot your phone
normally. It'll take 5-10 Minutes for booting
because it is now booting in a new ROM.
And that's it, your phone is now back! Your
phone has got back the Stock ROM !
Click to expand...
Click to collapse
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
Flash s5830i cwm.
Go to this link for cwm.
And then clear data cach and dalvik cache..and flash any stock based custom rom..
http://forum.xda-developers.com/showthread.php?t=1552792
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Wipe data and cache from stock recovery and then reflash your device with odin
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
If this solution doesn't work, then your only solution is USB Jig.
shijopj2012 said:
I have done it but still this issue of booting up persists. What do you think? Is it a hardware related issue or still I can make it live with some flashing techs....
thanks
Click to expand...
Click to collapse
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Sonn11 said:
hi, i installed wrong CWM and now its bricked, my phone cant enter the download mode but still enter the recovery mode. I followed your instructions but when i connect my phone to PC, open Odin and press Volumn + - and Home. ít didnt work, just a blank screen like it before.Help me plz
Click to expand...
Click to collapse
First. u should download CMW for s5830i ,.copy it to your sd card.Then download a custom rom and flash it..
If u had made a backup before doing this u can restore it.In my case i restore it .if u encounter any error again inform me
amolgosavi said:
It is not hardware related..just flash stock rom and this time check partition in odin..and this time i think your device boot problem is solve..just flash
Sent from my GT-S5830i using Tapatalk 2
Click to expand...
Click to collapse
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
shijopj2012 said:
Dear friend,
I have tried all the ways as you explained still the phone after power on SAMSUNG dispaly will come and then animation. Keep on repeating the same and never come the display to home. Is there anything else I can do to make live.... pelase
thank you!
Click to expand...
Click to collapse
Whenever I flash back my stock rom using odin on my Galaxy Ace, it gives me a bootloop just like yours. The simple solution for this is go to recovery mod and do a "Wipe data/ factory reset". That's it now reboot. It should work fine. Please try this. Hope I Helped
use Odin3 v1.84 for Samsung Galaxy Ace-i instead
Its working........great.........
If u want to flash then use "Odin3.v3.07.Cooperve" and also put "cooperve_0623.pit" in pit tab...........
why odin3 v3.07 can't detect my phone, my phone displays odin mode and at the bottom donloading do not turn off target, nothing happens..

[Q] My phone don't turn on after flashing the rom .....

I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA path
Now it is not starting any more.....neither in Recovery mode( Volume up + Home + Power button) .... nor in Download mode....
When I try to charge... It is becoming hot....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Thanks
masu0069 said:
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA path
Now it is not starting any more.....neither in Recovery mode( Volume up + Home + Power button) .... nor in Download mode....
When I try to charge... It is becoming hot....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Thanks
Click to expand...
Click to collapse
sorry to tell you this.the only solution is going to store and act as a noob.waiting for a solution will just keep your mobile useless

Categories

Resources