Device is updated to NK1 .... Its a 38mb update ..
includes Stabilty
Able to root?
Sent from my SM-G7102 using Tapatalk
I already updated with Odin ROM then i flashed TWRP then SuperSU and i removed many apps
Sent from my GT-I9500 using Tapatalk
it solve blue screen and restart problem ?
peman2010 said:
it solve blue screen and restart problem ?
Click to expand...
Click to collapse
ya i havent faced any Blue screen or reboot yet ...
anand4edu said:
Able to root?
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
knoz stays forever ...u can root but it will trigger
Hope solve problem blue screen and restart
5874
In NK1 and NK2 firmwares blue screen problem solved. I use NK2 firmware 3-4 days, hard testing phone and no blue screens:good:
grand 2 got stability update NK1
Grand 2 got stability update NK1
Blue screen & Restart got stopped &less ram usage
Me too
Thanks god it's never happened it's solve the blue screen restart
Till now
Ya even I haven't face it yet.....
Sanjuujosephh said:
knoz stays forever ...u can root but it will trigger
Click to expand...
Click to collapse
Triangle away sets the limit of Knox 0x1 (2) though I did multiple ROM flashing. However it fails to reset completely.
Sent from my SM-G7102 using Tapatalk
Knox will read even a slight change in ur system... So sometimes while using Triangle away itself Knox triggers
coolvij said:
Grand 2 got stability update NK1
Blue screen & Restart got stopped &less ram usage
Click to expand...
Click to collapse
Andrey_Dnepr said:
In NK1 and NK2 firmwares blue screen problem solved. I use NK2 firmware 3-4 days, hard testing phone and no blue screens:good:
Click to expand...
Click to collapse
deepakfriends1 said:
Hope solve problem blue screen and restart
Click to expand...
Click to collapse
I faced a reboot [emoji30]
Reboot or blue screen and reboot? I use 5 days firmware UBNK2 (UAE) and no blue screen or reboot. On old different stock firmwares I have blue screen on the day of installation or next day. Blue screens happens few time at day. On UBNK2 I not see none reboots.
AL_IRAQI said:
I already updated with Odin ROM then i flashed TWRP then SuperSU and i removed many apps
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
i can't update my rom via OTA bro...i'm on NH3..and it shows my grand 2 is up to date
can you send me the link of nk1 rom for me
You can download & flash from odin the latest update of NK1
http://www.sammobile.com/firmwares/download/38727/G7102DDUBNK1_G7102ODDBNK1_INU.zip/
After the update my phone started to show a wierd problem. I am connected to 3g internet but i am not able to make calls. Most of the time it says "mobile network not connected" . Please help me
Sanjuujosephh said:
Device is updated to NK1 .... Its a 38mb update ..
includes Stabilty
Click to expand...
Click to collapse
After this update my phones heating a lot. not able to control it. Most of the time i getting a msg Touchwiz is unfortunately stopped working. Even i reduced all graphics in developer option my grand 2 is very slow and heating a lot. Please help me on this.
Does anybody get a "failed to initialize camera" error message
Related
i just bought my mobile phone...it came with ICS 4.0.3
iam experiencing some errors first my ram is only 687 while my friend who has the same phone and same software version has 800+
it freezes every now and then when trying to open it (sweep to unlock i mean) and my music is being interrupted so that it stops for about 1 sec then continues playing
iam still in warranty but if u guys have a solution for all of this that wud be nice and thanks
Install Kies and do make an update.
After this the probs should be gone or u can use the warranty
CHEERS
Sent from my GT-I9100 with RootBox
well that didnt work ... for 1 thing i had no updates...it says mine is the latest update
astars77 said:
well that didnt work ... for 1 thing i had no updates...it says mine is the latest update
Click to expand...
Click to collapse
Tried a factory reset?
yes i did but no changes yet :\
hay guys so recently my Samsung gs3 screen stooped working but it kept making noise for notifications i got it in to download mode and plugged it into kies and clicked on firmware upgrade and instillation as that was recommended but it didn't help. do you guys know what is rong?
here is the info about the device:
gt-i9300
running android 4.3
memory 16gb
Sounds like your screen died. You could try flashing a fresh firmware installation via odin, but you probably need a replacement screen.
boomboomer said:
Sounds like your screen died. You could try flashing a fresh firmware installation via odin, but you probably need a replacement screen.
Click to expand...
Click to collapse
tried that
Running 4.3 then Kies upgraded to what ???
As said you would be better with a service repair .
JJEgan said:
Running 4.3 then Kies upgraded to what ???
As said you would be better with a service repair .
Click to expand...
Click to collapse
upgraded i think to 4.1
aidenbliss789 said:
upgraded i think to 4.1
Click to expand...
Click to collapse
1 comes before 3 so its older .
Ok heres the situation.
i tried rooting my rogers phone after an update and this is what has happened.
I can get into download mode and thats it.
Otherwise I am stuck on a screen that says....
image size to large
display image fail
secure fail kernal
how do i fix this? and if i need to install anythnig through odin what and where is it?
THANKS..... i need to leave for work in an hour and a half and i need my phone
Guess your update had knox. You will need to flash the original knox enabled firmware, the one you got updated to. Check on sammobile if they have the firmware available. You can't go back to a older rom afaik.
What's your phone model number?
Silesh.Nair said:
Guess your update had knox. You will need to flash the original knox enabled firmware, the one you got updated to. Check on sammobile if they have the firmware available. You can't go back to a older rom afaik.
What's your phone model number?
Click to expand...
Click to collapse
SGH-I527M ......i cracked the screen on my old mega and got sent this one.....rogers phones werent supposed to have knox
And I have no clue what that update was.
and I cant download it from sammobile as it uses terrafile or something and it wont let me download it
I tried installing this Galaxy Mega 6.3 LTE (Canada) SGH-I527M RWC Canada (rogers) I527MVLUAMH1 4.2.2 01.08.2013 1251310 but no luck
The last firmware I see for Canada Rogers is I527MVLUAMH1 dated September 2013.
All new firmwares are coming out with Knox. I suggest you pm valentel, shazzl or megalomanic with your issue. They are the stock masters.
Sent from my GT-I9205 using Tapatalk
Silesh.Nair said:
The last firmware I see for Canada Rogers is I527MVLUAMH1 dated September 2013.
All new firmwares are coming out with Knox. I suggest you pm valentel, shazzl or megalomanic with your issue. They are the stock masters.
Sent from my GT-I9205 using Tapatalk
Click to expand...
Click to collapse
ok thanks.....i was actually running mega's stock rom on my last mega
This might help.
http://forum.xda-developers.com/showthread.php?t=2615124
magicninja said:
Ok heres the situation.
i tried rooting my rogers phone after an update and this is what has happened.
I can get into download mode and thats it.
Otherwise I am stuck on a screen that says....
image size to large
display image fail
secure fail kernal
how do i fix this? and if i need to install anythnig through odin what and where is it?
THANKS..... i need to leave for work in an hour and a half and i need my phone
Click to expand...
Click to collapse
I had the same problem : http://forum.xda-developers.com/show...php?p=49931197, post #94 and more, if that can help you !!!
hokuto34 said:
I had the same problem : http://forum.xda-developers.com/show...php?p=49931197, post #94 and more, if that can help you !!!
Click to expand...
Click to collapse
404 page not found
magicninja said:
404 page not found
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=49931197
works for me !!!
hokuto34 said:
http://forum.xda-developers.com/showthread.php?p=49931197
works for me !!!
Click to expand...
Click to collapse
What did you do to fix it as I still can't find a way
Sent from my GT-I9205 using xda app-developers app
OK I have tried to install the latest firmware I could find through Odin.....no luck...... Also tried installing cmw.... no luck...... tried updating through kies just keeps saying connecting. I know there is another update that I believe is the same one I got on my phone Feb 1st.
The only version I could find are Asian ones and would take over 7 hours to download.
I have already taken 7 hours to download the last version which didn't work.
Any thoughts
Sent from my GT-I9205 using xda app-developers app
I have the same problem with sgh-i527m I tried flashing quite a few roms with no luck. My knox line on the bootloader page shows 0xffffffc
I can boot into bootloader mode but that is it.
Sent from my Nexus 5 using xda app-developers app
fleagalbaum said:
I have the same problem with sgh-i527m I tried flashing quite a few roms with no luck. My knox line on the bootloader page shows 0xffffffc
I can boot into bootloader mode but that is it.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Hello,
I am joining this thread to say that the above is the exact problem I am having with my galaxy mega 1527m right now.
the same knox line even, I was going to post to get help but as I see the answer is not here yet.
below is what it says,
Odin mode
Product name:sgh-1527m
current binary: Samsung official
system status: official
Knox kernel lock: 0xfffffffc
Knox warranty void: 0xfffffffc
csb-config-lsb: 0x30
bootloader apswrev: 2
write protection: enable
any help or replies with any further dos and especially donts would be appreciated..
I am about to try to flash the rogers rom on my bell phone, I don't know .
last edit to post ...at end of flash it says
image size too large! W:1000, H1920
display image fail
SECURE FAIL: KERNEL
Peace
Samsung Galaxy Mega 6.3 GT-I9200 MTK6572A Bricked Need Help Urgenb
Hi
Anyone who can help me fix my phone. I was to load a custom ROM on my phone but since i was using SP Flash Tools accidentally clicked full format and everything is gone and nothing turns on. When i plug in the phone the unknown device dhows in the device manager of windows 8.1 I have tried to install the drivers but every time i try to flash it it returns with DRAM FAIL or some other related errors. I have made an insane mistake and seems like i have BRICKED the phone. I am unable to find the ROM, The Kernal, Scatter file, I have managed to get a scatter file but it does not work with the SP Flash tools. I tried to use ODIN but the phone does not go into download mode previously while trying to install the custom rom. The chip is MTK 6572A, It is a dual core 1.7ghz, Mali 400, I have lost the original backup and everything. Plz folks help me to fix the phone back and how can I go about it any thing that can make it work I would be thank full.
hi
i'm getting a problem with my galaxy star duos because suddenly the network doesnt work i never touch the rom or the kernel with any program, if i search manually for a network says error to search networks, I've tried my SIM on another phone it works perfectly, the imei number that says the phone after *#06# its the same that the phone have under the battery, i've read the other similar posts refering to the same problem but in the sIII the causes there are so different and i dont touch the rom on this phone it only have 4 months of use. what can i do? my knowledge about flashing and english is poor
sergiodbg said:
hi
i'm getting a problem with my galaxy star duos because suddenly the network doesnt work i never touch the rom or the kernel with any program, if i search manually for a network says error to search networks, I've tried my SIM on another phone it works perfectly, the imei number that says the phone after *#06# its the same that the phone have under the battery, i've read the other similar posts refering to the same problem but in the sIII the causes there are so different and i dont touch the rom on this phone it only have 4 months of use. what can i do? my knowledge about flashing and english is poor
Click to expand...
Click to collapse
did you root your phone or update it recently??
35624485 670
abhishekr700 said:
did you root your phone or update it recently??
Click to expand...
Click to collapse
no i dont do that because i was expecting for a stock update
sergiodbg said:
no i dont do that because i was expecting for a stock update
Click to expand...
Click to collapse
is your baseband same as the rom
check it in about phone menu
abhishekr700 said:
is your baseband same as the rom
check it in about phone menu
Click to expand...
Click to collapse
base band version
s5282ddamh1
compilation number
jzo54k.s5282xxamea
abhishekr700 said:
is your baseband same as the rom
check it in about phone menu
Click to expand...
Click to collapse
Same problem with me.. While browsing suddenly the network disappears.. And after reboot it takes a lot of time for the network to come back.. Dont know what to do..
Sent from my GT-S5282 using XDA Premium 4 mobile app
nairitmukherjee0007 said:
Same problem with me.. While browsing suddenly the network disappears.. And after reboot it takes a lot of time for the network to come back.. Dont know what to do..
Sent from my GT-S5282 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
okk
i am not sure but i think that samsung rolled some new update recently to yoyur phones in which theres a problem with the baseband
Flash stock rom via odin .It may fix the problem
Dont forget to press the thanks button
abhishekr700 said:
okk
i am not sure but i think that samsung rolled some new update recently to yoyur phones in which theres a problem with the baseband
Flash stock rom via odin .It may fix the problem
Dont forget to press the thanks button
Click to expand...
Click to collapse
hi i flashed the phone via odin with stock rom an has the same problem not registered in the network
sergiodbg said:
hi i flashed the phone via odin with stock rom an has the same problem not registered in the network
Click to expand...
Click to collapse
Did u flssh the same firmware which was causing u the problem or some previous stable version ??
Sent from my GT-S5360 using Tapatalk 2
abhishekr700 said:
Did u flssh the same firmware which was causing u the problem or some previous stable version ??
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
hi i didnt find the same firmware i flashed with the last available at samsung update but i made a recovery before do it, with the last firmware dont work i made the recovery to get the original firmware again and dont work again
sergiodbg said:
hi i didnt find the same firmware i flashed with the last available at samsung update but i made a recovery before do it, with the last firmware dont work i made the recovery to get the original firmware again and dont work again
Click to expand...
Click to collapse
well now i think you have some ricky hardware problem
you shuld visit samsung serveicecentre
thanks.
abhishekr700 said:
well now i think you have some ricky hardware problem
you shuld visit samsung serveicecentre
thanks.
Click to expand...
Click to collapse
ok i'll do that thanks for your help
did your phone show enter unlock code ?? is that problem shown after you flash arabic stock rom ??
midoooz said:
did your phone show enter unlock code ?? is that problem shown after you flash arabic stock rom ??
Click to expand...
Click to collapse
no the phone doesnt show the enter unlock code and all the problems began before flashing
Hey,
As the title says the phone is stuck in bootloop after I was playing around with knox and enabled "Knox active protection" (the phone is rooted with pingpong...)
Sooooo the phone restarted and is now stuck in the loop :crying:
I know I had the latest update installed 5.1.1 I think and I live in Sweden so i should have the international thingy, but I don't really know more than that unfortunately... Searched around and found this thread but i was a bit too late for that warning, so i tried to flash the phone with odin but i only receive this message/error...
G920FXXU2BOFJ_G920FTEF2BOF1_G920FXXU2BOFJ_HOME.tar.mp5 <-- The name of the file I tried.
So I don't really know how to fix this problem and i've searched for info about it but i can't find any... And it's my only phone so I really need to fix it
you have s6 edge, and trying to flash s6 rom?????????????
Please fix it by using s6 edge fw then write results here
??
Sent from my SM-G925F using Tapatalk
vanderax said:
you have s6 edge, and trying to flash s6 rom?????????????
Please fix it by using s6 edge fw then write results here
Click to expand...
Click to collapse
Oh really?
Sigh, then the site i downloaded it from had the wrong fw -.-
Brb then...
Gray Face said:
Oh really?
Sigh, then the site i downloaded it from had the wrong fw -.-
Brb then...
Click to expand...
Click to collapse
please click thanks if it worked
vanderax said:
you have s6 edge, and trying to flash s6 rom?????????????
Please fix it by using s6 edge fw then write results here
Click to expand...
Click to collapse
Sorry forgot the thread, no it didnt work ether...
Used Samsung smart swich and fixed the phone that way.
Mod can lock the thread