i am really frustrated with my s3, since July i am trying to install custom rom(tried 5-6 ROM), but after i finished and reboot, always i've got UNKNOWN baseband and IMEI! i need to reflash again to stock firmware and the baseband and imei will be fixed.
this is my S3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No information or history provided, unable to offer help.
What has happened to the phone before, what version stock makes it work and which custom roms have you tried.
sir may phone has stock firmware, orig from box, i just wanna install some custom rom like cyanogen etc... but everytime i installed rom, i always got problem, baseband and imei becomes UNKNOWN! i need to flash again with stock rom from sammobile, to fix everything, after flashing stock, it is working properly, but stock orig firmware.
johnkill_dxb said:
sir may phone has stock firmware, orig from box, i just wanna install some custom rom like cyanogen etc... but everytime i installed rom, i always got problem, baseband and imei becomes UNKNOWN! i need to flash again with stock rom from sammobile, to fix everything, after flashing stock, it is working properly, but stock orig firmware.
Click to expand...
Click to collapse
Like boomboomer said more detail is needed their are many reasons why you lose imei one of the main ones is upgrade from efs v1 to efs v2 if you post the information that @boomboomer as asked for then he and others including myself will be able to answer your question better.
i just followed the procedure here:
http://www.android.gs/install-paranoid-android-4-6-beta-rom-for-samsung-galaxy-s3-i9300/
also this one procedure
http://beta.download.cyanogenmod.org/install
better i stay on stock firmware
Have you tried to back up your ESF folder or use ARIZA Patch?
johnkill_dxb said:
better i stay on stock firmware
Click to expand...
Click to collapse
Are you doing a clean install with each rom and factory reset?
We still need details.
yes clean restore with factory reset
Related
I flash 4.1.1 it free up table parameters, move it on the go is very convenient, I tried to wipe the, odin flash but still not, when I return 4.0?????
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If I can make out correctly you want to go back to ICS from JB? Try ODIN'ing back to latest stock ICS build from your region, if you do not have a nandroid backup. (you might have to factory reset the phone in case you are stuck in bootloop)
watsa said:
If I can make out correctly you want to go back to ICS from JB? Try ODIN'ing back to latest stock ICS build from your region, if you do not have a nandroid backup. (you might have to factory reset the phone in case you are stuck in bootloop)
Click to expand...
Click to collapse
no ,I want to 4.1.1 but the table is too troublesome for you to keep up so no matter how me move
itachi naruto said:
I flash 4.1.1 it free up table parameters, move it on the go is very convenient, I tried to wipe the, odin flash but still not, when I return 4.0?????
Click to expand...
Click to collapse
Looks like a direct translation from Japanese to English.
I think this guy flashed the JB release on the Japanese S3 variant and now he's got this information onscreen.
Here's my attempt to ask him whether he's got an I9300.
お使いのデバイスは、i9300のですか?
victorator said:
Looks like a direct translation from Japanese to English.
I think this guy flashed the JB release on the Japanese S3 variant and now he's got this information onscreen.
Here's my attempt to ask him whether he's got an I9300.
お使いのデバイスは、i9300のですか?
Click to expand...
Click to collapse
yes yes it is true , and hown close information : (
my very bad english
itachi naruto said:
yes yes it is true , and hown close information : (
my very bad english
Click to expand...
Click to collapse
Do you have the international I9300 model or the Japanese model?
If you have the Japanese model then download the appropriate firmware and install it using 'Odin'.
あなたは国際I9300モデルや日本人モデルを持っていますか?
あなたは日本のモデルを持っているなら、適切なファームウェアをダウンロードし、"オーディン"を使用してそれをインストールしてください。
OK, I have a galaxy S2 I9100 (to be rooted) stock ICS 4.0.4 baseband version I9100DDLPC and build number IMM76D.XWLQ2.
+ I have an insane chip
I have gone through a lot of threads and I am confused.
I found the root guide here:
http://forum.xda-developers.com/showthread.php?p=28178105
I want to follow the first step (for phones with brick bug).
After doing that, i want to get rid of my stock kernel. Can I flash the Siyah kernel through stock recovery? Which version of Siyah kernel is the latest while being safe from the brick bug?
Just flash a custom kernel via Odin and you'll have root access and you don't have to worry about the brick bug anymore (Siyah is safe). Check www.gokhanmoral.com for the version you need for ICS.
Thanks...
Donnie Sins said:
Just flash a custom kernel via Odin and you'll have root access and you don't have to worry about the brick bug anymore (Siyah is safe). Check www.gokhanmoral.com for the version you need for ICS.[/Q
Thanks for the quick reply!
One more thing, after flashing Siyah suppose I want to install cm10/10.1, I just have to full wipe in cwm and flash the cm10 zip file right?
And is the CyanogenMod 10 kernel safe from the brick bug?
Click to expand...
Click to collapse
Read the thread for the particular version of CM you want to flash; read the first page for the instructions (which will be very clear) & follow those to the letter, then read the last 10-20 pages to get an idea of people's experiences with that version so you know what to expect.
Simple.
And yes, custom kernels are safe from the whole brick bug-thing.
Ive got to say that the brickbug only applies to 4.0.4 stock firmware.
Its not a case of flashing siyah etc and the brickbug is gone "forever".
Its only gone if you dont run 4.0.4 stock ever again.So if you have to revert back to a stock rom, pick GB or 4.0.3 for your country etc and you wont have to worry.
Only saying in case you dont know.
you could also flash official 4.1.2, that should not contain the brick bug.
Here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
reply
Thanks guys.... managed to root and run aokp..... smooth and fast.....no problems
Hi guys
I flashed CF-Root-SGS2_XW_NEE_LPY-v5.6-CWM5 with odin3 v1.85
all done and shows Pass on Odin. on reboot it shows yellow triangle and displays goes off and phone is not starting
download mood and CWM is working i also installed neatrom 4.8 but it is still the same.
nead to fix this please help
Sounds like you've either used the wrong CFRoot, you've used one that has problems mounting secure storage (can't be bothered checking the one you used myself), or it's simply barfed for some reason. As long as you're not running Android 4.0.4 (VERY IMPORTANT, CHECK THIS FIRST !), boot into recovery & do a wipe/factory reset.
If you are running 4.0.4 or if the wipe doesn't work or you have no recovery, go back to stock via Odin to get a clean slate & try again (maybe do a bit more research first; these problems can almost always be avoided by doing same).
Cf root...wow thats old way. What firmware are you on mate?
i am using 4.1.2 official i have done a wipe/factory reset and its still the same
now what should i do? if you suggest me to do stock rom again could you please suggest me the link for best stock rom sgs2 4.1.2
it will be appriciable
I already told you in my PP.
There is no best stock rom; they're all the same apart from crap individual carriers put in them & differences in the modems. Get one for your carrier; it's not important which one (as long as it isn't 4.0.4 - stay away from those completely) given you're likely going to re-root your phone/flash a custom kernel/rom/whatever immediately after.
Go to Samfirmware, use the pulldown boxes, download the rom, flash it with Odin. You should know this stuff before you start trying to flash custom roms/kernels.
CF-ROOT is for ICS.Go back to odin and \flash siyah v6 or PhilZ !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help me to downgrade this I9300 to any 4.0.4 version!
It was on 4.1.2 XXEMG4, I've downgraded it to 4.1.2 XXELLA, and now I've managed to downgrade to 4.1.1
The phone state is now like in this picture:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or in this one:
.
.
I still need to downgrade it to 4.0.4, but after flash without any error, phone could not find any correct partition.
I've tryed with Odin 3.0.4, 3.0.7 and 3.0.9, with correct PIT, without PIT, I've cleared cache partition, I've cleared dalvik cache with a custom recovery... phone is always in this status:
This was posted in a similar thread..
[Quote:
Originally Posted by krajowa
there is soulution for this look in cwm-mount/unmount-format data,sd,.... last option and after reinstall sys using odin to oryginal android or some custoom room if rooted (offcourse) i just did like this and it workd !! boot screen some seconds and please enter pin code
This actually worked! Thank you for posting this. That option in CWM was the only one that actually recognized the /data and removed the corrupted image/preloader I flashed previously using the S5 SIII rom.
Thanks again]
Hope it helps.
@HackT3k: if MG4 was working, you cannot go back without losing your telephone functions. Also ELLA wouldn't work.
rp158 said:
@HackT3k: if MG4 was working, you cannot go back without losing your telephone functions. Also ELLA wouldn't work.
Click to expand...
Click to collapse
I don't care if IMEI will be 0049.. I just want to boot up with 4.0.4.. Can it be done?
@HackT3k: you've to downgrade the bootloader first. Look here.
HackT3k said:
Please help me to downgrade this I9300 to any 4.0.4 version!
]
Click to expand...
Click to collapse
Sorry I can't help, but was just wondering why you want to go back to ICS with it's risk of sudden death issues, as it seems like a lot of hassle?
rp158 said:
@HackT3k: if MG4 was working, you cannot go back without losing your telephone functions. Also ELLA wouldn't work.
Click to expand...
Click to collapse
rp158 said:
@HackT3k: you've to downgrade the bootloader first. Look here.
Click to expand...
Click to collapse
I've tryed all methods to downgrade bootloader... Now I'm on XXALEF bootloader, but still have the same problem: Bootloop, and recovery not working... Just like in last image.
@HackT3k: sorry, I've no idea anymore.
Hello! I badly NEEDED your help guys!
My Device is Samsung Galaxy S3 GT-I9300.
I have installed a new firmware, its android version is 4.3 and an open line version for Philippines.
But it can't make and can't receive call and sms. (I have tested all the 4.3 version that is open line from sammobile.com, but it didn't work to my carrier)
The only solution I think is to flash a new modem, or to bring it back to its default stockrom which is 4.1.2(this device is bought from Israel, but it works to our carriers in the Philippines.)
The picture below is the screenshot of my device before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please HELP me, any help that makes the possible solution is MUCH appreciated.
Please HELP me, I really NEED you assistance please.
@jphilip04: is IMEI, showed in settings, the same as shown on the label under battery?
@rp158, yes sir, they were the same. What should I do now? Please.
@jphilip04: go back to your last firmware with working net access (with Odin). If everythings works fine there, let it update to 4.3 by KIES. If you still have net access, try to install your Phillipines-firmware.
rp158 said:
@jphilip04: go back to your last firmware with working net access (with Odin). If everythings works fine there, let it update to 4.3 by KIES. If you still have net access, try to install your Phillipines-firmware.
Click to expand...
Click to collapse
@rp158, The problem is, I can't find the default firmware from sammobile.com. Because my device was bought from Israel. I tried to search it on google, but theres' no link that can direct me to download the exact firmware with the exact modem version.
But before I did anything on my device, I also did a nandroid backup to my default firmware thru TWRP recovery .
@jphilip04: I find on sammobile.com Israel-EMC2-build. So what?
rp158 said:
@jphilip04: I find on sammobile.com Israel-EMC2-build. So what?
Click to expand...
Click to collapse
@rp158 And what about the baseband version? Is it I9300JKEMC1 too? because I can't find the firmware with the same BASEBAND VERSION: I9300JKEMC1 on sammobile.
@jphilip04: not important. If you loose IMEI with old firmware, do nothing with OTA or KIES but flash immediatly the actual Israel-firmware with Odin.
rp158 said:
@jphilip04: not important. If you loose IMEI with old firmware, do nothing with OTA or KIES but flash immediatly the actual Israel-firmware with Odin.
Click to expand...
Click to collapse
I will try it. I'll give you an update asap once I have install it.
Thanks!