Hi guys
I flashed CF-Root-SGS2_XW_NEE_LPY-v5.6-CWM5 with odin3 v1.85
all done and shows Pass on Odin. on reboot it shows yellow triangle and displays goes off and phone is not starting
download mood and CWM is working i also installed neatrom 4.8 but it is still the same.
nead to fix this please help
Sounds like you've either used the wrong CFRoot, you've used one that has problems mounting secure storage (can't be bothered checking the one you used myself), or it's simply barfed for some reason. As long as you're not running Android 4.0.4 (VERY IMPORTANT, CHECK THIS FIRST !), boot into recovery & do a wipe/factory reset.
If you are running 4.0.4 or if the wipe doesn't work or you have no recovery, go back to stock via Odin to get a clean slate & try again (maybe do a bit more research first; these problems can almost always be avoided by doing same).
Cf root...wow thats old way. What firmware are you on mate?
i am using 4.1.2 official i have done a wipe/factory reset and its still the same
now what should i do? if you suggest me to do stock rom again could you please suggest me the link for best stock rom sgs2 4.1.2
it will be appriciable
I already told you in my PP.
There is no best stock rom; they're all the same apart from crap individual carriers put in them & differences in the modems. Get one for your carrier; it's not important which one (as long as it isn't 4.0.4 - stay away from those completely) given you're likely going to re-root your phone/flash a custom kernel/rom/whatever immediately after.
Go to Samfirmware, use the pulldown boxes, download the rom, flash it with Odin. You should know this stuff before you start trying to flash custom roms/kernels.
CF-ROOT is for ICS.Go back to odin and \flash siyah v6 or PhilZ !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
Hello!
I have a problem with the Ninphetamine 2.0.5 or with the SpeedMod Kernel!
I have made a Re-Partition
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XXKG6 and CF-Root-SGS2_XX_OXA_KG6-v4.1-CWM4
After the Reboot i Flash the Ninphetamine Kernel with CWM and then i reboot in the Recovery with CWM
But there is only the normal Recovery without the Ninphetamine Channel?
What I am doing wrong? i have tried the XXKG3 too!
I am a noob Please help me
I have made a Re-Partition
Why ????
Ninphetamine Channel
Whats that can you provide a link ???
Have you tried the instructions to flash the kernel .
jje
I think you should follow the instructions very carefully
I have never seen any of the rom flashing guidelines to select PIT files and "select re partition"
If you do this mostly you might end up in brick
Suggest you first read properly and follow the instructions carefully
Read instructions properly or your noobness will f-u-ck up ur sgs2
You are lucky you did not break your phone. You are lucky that you did not try to overwrite the bootloader. Which is probably why your phone is not bricked yet.
According to your ODIN pic, you flashed a stock ROM (PDA), which also contains the kernel and the Samsung recovery.
Some custom kernel contains Clockwork Recovery, but cannot be accessed via HOME+VOL UP+PWR buttons. You need to boot into the ROM, then click the Clockwork program or reboot to recovery. It really depends on which kernel.
Anyways, you are absolutely right, you are a n00b that is highly trained at killing your own phone, but here are the steps.
Assuming you already flashed to a stock rom, you only need to replace the kernel.
Just boot your phone into DOWNLOAD MODE (Home + Vol Down + PWR)
Select PDA, and then select Speedmod kernel *.tar file.
Flash.
You should then check the ABOUT PHONE in your settings to see if you have the correct kernel.
Speedmod and Ninphetamine already have clockwork in it, you should be able to boot to Clockwork recovery by using the HOME+VOL UP+PWR buttons.
OK, I have a galaxy S2 I9100 (to be rooted) stock ICS 4.0.4 baseband version I9100DDLPC and build number IMM76D.XWLQ2.
+ I have an insane chip
I have gone through a lot of threads and I am confused.
I found the root guide here:
http://forum.xda-developers.com/showthread.php?p=28178105
I want to follow the first step (for phones with brick bug).
After doing that, i want to get rid of my stock kernel. Can I flash the Siyah kernel through stock recovery? Which version of Siyah kernel is the latest while being safe from the brick bug?
Just flash a custom kernel via Odin and you'll have root access and you don't have to worry about the brick bug anymore (Siyah is safe). Check www.gokhanmoral.com for the version you need for ICS.
Thanks...
Donnie Sins said:
Just flash a custom kernel via Odin and you'll have root access and you don't have to worry about the brick bug anymore (Siyah is safe). Check www.gokhanmoral.com for the version you need for ICS.[/Q
Thanks for the quick reply!
One more thing, after flashing Siyah suppose I want to install cm10/10.1, I just have to full wipe in cwm and flash the cm10 zip file right?
And is the CyanogenMod 10 kernel safe from the brick bug?
Click to expand...
Click to collapse
Read the thread for the particular version of CM you want to flash; read the first page for the instructions (which will be very clear) & follow those to the letter, then read the last 10-20 pages to get an idea of people's experiences with that version so you know what to expect.
Simple.
And yes, custom kernels are safe from the whole brick bug-thing.
Ive got to say that the brickbug only applies to 4.0.4 stock firmware.
Its not a case of flashing siyah etc and the brickbug is gone "forever".
Its only gone if you dont run 4.0.4 stock ever again.So if you have to revert back to a stock rom, pick GB or 4.0.3 for your country etc and you wont have to worry.
Only saying in case you dont know.
you could also flash official 4.1.2, that should not contain the brick bug.
Here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from the little guy
reply
Thanks guys.... managed to root and run aokp..... smooth and fast.....no problems
Trying to delete thread. Posted in wrong forum. Moved here: http://forum.xda-developers.com/galaxy-s3-att/help/gs3-impregnable-wall-rooting-flashing-t2811864/post54055338
sirlitch said:
Hi guys. First post to the forum, been lurking for years, just registered.
I recently updated my phone with the update that Samsung kept bothering me about every 2 hours or so. And It has messed my phone up, it's slow, it drags. It doesn't even show the clock on my lock screen without thinking about it for about 10 seconds. Train wreck.
I've rooted, installed custom recovery, and loaded custom roms on my Galaxy S i9000 and on my grouper Nexus 7. I kinda get how all this works, I'm not a total newb, but with this phone I am at a dead end and i've tried everything I know, and a bunch more tricks I learned here and nothing is working.
My Phone: Samsung Galaxy S3: Canadian (Bell) version SGH-I747M, supposedly the same as the S3 AT&T,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LINK IF IMAGE WONT IMBED: https://www.dropbox.com/s/dmgw0wj59ry70f6/Screenshot_2014-07-10-10-22-46.png
I had to use zadig to replace my drivers for Heimdall
Heimdall will sucessfully flash clockwork recovery, but it refuses to install my CM rom. I haven't tried any other roms, but from what I've read in the forum here, it doesn't seem to matter what rom you use, it just wont do it.
I get Assert, bootloader errors when trying to install from zip in Clockwork Recovery. tried the fix here: http://forum.xda-developers.com/showthread.php?p=41503727
and it does not work. Odin just says "FAILED" right away.
I thought maybe if I just rooted the phone first, I could at least flash a custom recovery and not have it over written everytime I boot.
I tried CF-AutoRoot, Odin says success, but nothing changes on my phone.
I tried OneClickRoot which worked wonders on my GS i9000 back in the day. No success.
I have tried CM Installer to do it automated, It says success, but no change.
People have reported that Knox may be the problem, but as far as I can tell I don't have it on my phone.
I've been working on this for a day and a half and all I've managed to do is factory reset my phone about 12 times. I need help.. I don't know what to do. Has anybody managed to root their phone or install a custom recovery or rom with a GS3 running 4.4?
Click to expand...
Click to collapse
Wrong forum myfriend post your question here >> http://forum.xda-developers.com/galaxy-s3-att <<
i am really frustrated with my s3, since July i am trying to install custom rom(tried 5-6 ROM), but after i finished and reboot, always i've got UNKNOWN baseband and IMEI! i need to reflash again to stock firmware and the baseband and imei will be fixed.
this is my S3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No information or history provided, unable to offer help.
What has happened to the phone before, what version stock makes it work and which custom roms have you tried.
sir may phone has stock firmware, orig from box, i just wanna install some custom rom like cyanogen etc... but everytime i installed rom, i always got problem, baseband and imei becomes UNKNOWN! i need to flash again with stock rom from sammobile, to fix everything, after flashing stock, it is working properly, but stock orig firmware.
johnkill_dxb said:
sir may phone has stock firmware, orig from box, i just wanna install some custom rom like cyanogen etc... but everytime i installed rom, i always got problem, baseband and imei becomes UNKNOWN! i need to flash again with stock rom from sammobile, to fix everything, after flashing stock, it is working properly, but stock orig firmware.
Click to expand...
Click to collapse
Like boomboomer said more detail is needed their are many reasons why you lose imei one of the main ones is upgrade from efs v1 to efs v2 if you post the information that @boomboomer as asked for then he and others including myself will be able to answer your question better.
i just followed the procedure here:
http://www.android.gs/install-paranoid-android-4-6-beta-rom-for-samsung-galaxy-s3-i9300/
also this one procedure
http://beta.download.cyanogenmod.org/install
better i stay on stock firmware
Have you tried to back up your ESF folder or use ARIZA Patch?
johnkill_dxb said:
better i stay on stock firmware
Click to expand...
Click to collapse
Are you doing a clean install with each rom and factory reset?
We still need details.
yes clean restore with factory reset
Hello XDA -Community,
first of all, sorry for my bad English!
I have a Samsung Galaxy S6 EDGE (SM-G925F) / original ROM - (last OTA update) / no branding / without root, that until recently worked perfectly and never made any complaints ... at least until a few days ago while an APP installation (she probably destroyed something) and got stuck in the bootloop .....
First i deleted the cache in recovery mode (I didn't want WIPE, because of data loss) because I read here that I might be able to solve the problem this way, but it didn't work ... then I downloaded the file - G925FXXS6ETI6_G925FDBT6ETJ1_G925FXXU6ERF6_HOME. tar.md5 via SamFirm, and flashed it (according to XDA flashing Thread) with ODIN3 (3.14.4) in DownloadModus on Handy, the only stupid thing is that ODIN aborted / stopped in the Installation Process! Since then the phone only boots up to the Samsung logo, the recovery mode has disappeared and I only get into the download mode! : (((
When i trying to re-flash the firmware, now ODIN3 always stops at boot.img and aborts the process (see Figure 2) with FAIL (different ODIN versions tried, different USB cables / ports connected)!
I also read here in the forum that you could make a backup with TWRP (I took: twrp-3.3.1-0-zerolte.img.tar) to save/recovery my phone-data ... TWRP cannot be done with ODIN3 either play, the preview goes also until recovery.img and then breaks off, again and again with Fail!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Help! What am I doing wrong or is the sMMC chip damaget!?
I've already tried everything and can't get any further, I'm really slowly desperate ... I will only RESCUE my DATA ! Any ideas?
Greeting from Macedonia
Try this https://samfw.com/firmware/SM-G925F/MBM/G925FXXU6ERF5 or this https://samfw.com/firmware/SM-G925F/MBM/G925FXXS6ETI6
Hi! welcome to XDA,
to begin with the motherbord is COOKED
The chip is damaged.
Greetings. Python.