Hello XDA -Community,
first of all, sorry for my bad English!
I have a Samsung Galaxy S6 EDGE (SM-G925F) / original ROM - (last OTA update) / no branding / without root, that until recently worked perfectly and never made any complaints ... at least until a few days ago while an APP installation (she probably destroyed something) and got stuck in the bootloop .....
First i deleted the cache in recovery mode (I didn't want WIPE, because of data loss) because I read here that I might be able to solve the problem this way, but it didn't work ... then I downloaded the file - G925FXXS6ETI6_G925FDBT6ETJ1_G925FXXU6ERF6_HOME. tar.md5 via SamFirm, and flashed it (according to XDA flashing Thread) with ODIN3 (3.14.4) in DownloadModus on Handy, the only stupid thing is that ODIN aborted / stopped in the Installation Process! Since then the phone only boots up to the Samsung logo, the recovery mode has disappeared and I only get into the download mode! : (((
When i trying to re-flash the firmware, now ODIN3 always stops at boot.img and aborts the process (see Figure 2) with FAIL (different ODIN versions tried, different USB cables / ports connected)!
I also read here in the forum that you could make a backup with TWRP (I took: twrp-3.3.1-0-zerolte.img.tar) to save/recovery my phone-data ... TWRP cannot be done with ODIN3 either play, the preview goes also until recovery.img and then breaks off, again and again with Fail!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Help! What am I doing wrong or is the sMMC chip damaget!?
I've already tried everything and can't get any further, I'm really slowly desperate ... I will only RESCUE my DATA ! Any ideas?
Greeting from Macedonia
Try this https://samfw.com/firmware/SM-G925F/MBM/G925FXXU6ERF5 or this https://samfw.com/firmware/SM-G925F/MBM/G925FXXS6ETI6
Hi! welcome to XDA,
to begin with the motherbord is COOKED
The chip is damaged.
Greetings. Python.
Related
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA
Hi,
My sons Samsung Galaxy Tab 10.1 GT-P7510 has decided to wipe its self. On startup it goes straight to ODIN3 Download mode (Protocol v2.1)
I have spent the entire day reading what to do and finally came up with the following:
1. Download Kies ( Which will not connect)
2. Download Odin3 v1.85
3. Download an md5 file ( of which I have tried many and none seem to work)
4. start Odin3 > click PDA and select the md5 file > connect the tab and turn it on (the tab tells me its connected and the 0:[com7] turns yellow) > click start.
it starts off promising by going green, but then it goes red and tells me write : failed.
I have tried a few PIT files just incase and some bootloader files also to without success.
Am I using the right files?
firstly what has my son done!!! and secondly how the hell do I sort this, I am starting to loose my patience.... bescause I have no idea.
Any help very much appreciated
Slavraf
Go to www.sammobile.com and download the proper stock ROM for your tab, extract the zip, then flash the .tar.md5 file inside. You should uninstall kies too if I'm not mistaken. And if your version of Odin doesn't work, try the one I'm using, v1.87. https://www.dropbox.com/s/dib0w993qc284ki/Odin3v1.87.zip?dl=0
Your son probably simple pressed the power and volume buttons and he unintentionally went into recovery mode and wiped the tab I guess, this is the only thing I can think of, tho I don't know how it can completely wipe the tab, its been a long time since I've went into the stock 3e recovery.
Sent from my GT-P7500 using Tapatalk
Thanks
Unfortunately I get the same result..... write error.
Thanks for your suggestion though
Did you try using the Odin version I attached?
I have same problem now... Yesterday my tab crashed and I tried to reboot it but get a bootloop, recovery crashed also, tried to flash stock Rom and recovery through Odin but failed. Tablet showed few error lines, as you can see at picture. Would be very thankful if anyone could help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi! First i'm sorry for my bad english
I must repair a s5830i, but i don't find a way.
it's go in boot loop when i turn on it, logo-->boot animation-->logo-->at infinite.
Hence i will flash a new stock rom, but when i link the smarthphone at pc(w7) odin ( v3.07 or v1.84) don't
detects the phone.
I have install the samsung driver and i also tried kies but but without results, odin don't detects the phone.
(an other phone like s6 is normally detects).
Therefore how can I do to make it recognize?
( if my english is very bad and you don't understand it, please tell me)
Try another data cable to connect phone with pc and then go to download mod and connect phone to pc
amolgosavi said:
Try another data cable to connect phone with pc and then go to download mod and connect phone to pc
Click to expand...
Click to collapse
With the same cable i have link s6 and s4 and odin detective their, so i have try to flash custom rom from Samsung recovery like explain the tutorial in this forum for unbrixk s5830i
But now i can't go i download mode o recovery, it is freeze in the logo "samsung"
Press vol up and vol down and power button for download mod..
i rewrite beacuse the situation is change, now odin recognize it but when i flash the firmware(pda, csc ,phone) the flash is successful but when the phone reboot i see this in the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after this the phone return in boot loop logo-->boot animation-->infinite
I found the problem .
I had the userdata corrupt , so I downloaded a new pda which contained a new userdata, i have flashed it and now...it goooo!!
I'm so happy, you can close the thread
Hey guys.....
A friend of mine gave a Galaxy S3 (GT-I9300) , but I have to fix it before use it... what's going on it.... Well... If I turn it on, it shows some intermittent black and white lines on the screen, as you can see
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but, when I enter in Odin mode, the screen is ok
So, I assumed there is no hardware issue in this mobile.... so, i thought it could be just a ROM error or something alike.... so, I downloaded KIES and Odin ((3.07, 3.09 and 3.10)).... I started on Odin.... I tried to flash the stock ROM on it, but I went to the error missing PIT partition.... after I read what is a PIT partition, I downloaded only the PIT file and tried to flash it alone and together with the MD5 ROM file..... So, NO.... nothing worked....
So, I went into the KIES and tried to used the all 3 options on Tools Menu .... the first one, doesn't work ((or I don't know what to do...))... the second one works.... asks for the serial number and start the progress bar and everything. But, when it reaches 70% just stops and says there is an error
.. and the third one doesn't help... at all....
So guys this is it what I already done so far in here and this is what I know what it could be done.... any thoughts or ideas to help me here?
I'm using a windows 8.1 x64....
Thanks very much for any help and assistance here =D
I'm reading something about MSKIP Toolkit and Heimdal.... any of these works in my case?
I'm reading this thread too - http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367 - but my phone does not reboot.... so, i'm stuck on step 3....
and in here - https://www.androidpit.de/forum/545386/there-is-no-pit-partition-and-re-partition-operation-failed - these guys are facing the same issue as mine....
So, no further ideas to do.... any in your side?
Cheers =D
any thoughts or ideas guys??
any ideas at all guys?
Hello,
I was running on a stock non-rooted ROM, when the phone did not suddenly did not boot any more. Instead I am getting a "White Screen with some black lines" not even the Samsung Logo screen. I tried to acess the recovery mode, but this seems not possible. I can only access the download mode.
When I tried to flash a new stock firmware through odin, I got the error message: "There is no PIT Partition". Same happen when I tried to flash the firmware with three/four-parts.
I look through multiple threads and tried to apply the methods given in
1) http://forum.xda-developers.com/galaxy-s3/help/solved-pit-bricked-dead-problem-gt-t2535367
2) http://www.android-hilfe.de/thema/i9300-stock-rom-26-11-13-i9300xxugmk6-4-3-dbt-pre-rooted-3-teilig.517665/
but non work so far, and I am always gettein either "Re-Partition operation failed", or sometime ODIN just stuck on "SetupConnection" and never go further.
Since this is a 2+ years old device, Service Center is not an option for me.
Can anyone suggest me a method to solve this error. Maybe provide me with new "PIT Partition" file, etc...
Thanks in advance.
same error with my International i9300 16gig, i have access to the download mod only
any solution plz?
i cant flash stock rom, even when i try to flash a PIT file, odin will stay in this line "get PIT for mapping.."
and this is when i power it on:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone able to solve this ? I have the exact same issue now...
pmadasnal said:
anyone able to solve this ? I have the exact same issue now...
Click to expand...
Click to collapse
Knackered phone. Only scamsung can fix it.
Beamed in by telepathy.
scamsung is not DOPE
shivadow said:
Knackered phone. Only scamsung can fix it.
Beamed in by telepathy.
Click to expand...
Click to collapse