[Q] softbrick s5830i - Galaxy Ace S5830i Q&A, Help & Troubleshooting

Hi! First i'm sorry for my bad english
I must repair a s5830i, but i don't find a way.
it's go in boot loop when i turn on it, logo-->boot animation-->logo-->at infinite.
Hence i will flash a new stock rom, but when i link the smarthphone at pc(w7) odin ( v3.07 or v1.84) don't
detects the phone.
I have install the samsung driver and i also tried kies but but without results, odin don't detects the phone.
(an other phone like s6 is normally detects).
Therefore how can I do to make it recognize?
( if my english is very bad and you don't understand it, please tell me)

Try another data cable to connect phone with pc and then go to download mod and connect phone to pc

amolgosavi said:
Try another data cable to connect phone with pc and then go to download mod and connect phone to pc
Click to expand...
Click to collapse
With the same cable i have link s6 and s4 and odin detective their, so i have try to flash custom rom from Samsung recovery like explain the tutorial in this forum for unbrixk s5830i
But now i can't go i download mode o recovery, it is freeze in the logo "samsung"

Press vol up and vol down and power button for download mod..

i rewrite beacuse the situation is change, now odin recognize it but when i flash the firmware(pda, csc ,phone) the flash is successful but when the phone reboot i see this in the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after this the phone return in boot loop logo-->boot animation-->infinite

I found the problem .
I had the userdata corrupt , so I downloaded a new pda which contained a new userdata, i have flashed it and now...it goooo!!
I'm so happy, you can close the thread

Related

Help Please soft brick ( FIXED )

Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any help would be great-full
Rueben_ said:
Hi guys and girls
Have I bricked my device?
Device: Galaxy S WIFI 5.0 International
I was about to flash a rom through odin so I entered download mode with no problems. Rom wont flash so i rebooted the device and got the following image. What does it mean? Also Odin recognises the device but will not allow me to flash.
Any help would be great-full
Click to expand...
Click to collapse
You soft-bricked your device. These icons is the forced download mode. It means that you need to flash something to get over it. (and do NEVER put something in the phone section. You should have flash it in the PDA section.
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Tacsi566 said:
i had the same screen yesterday.just flash the kernel and reboot.it should boot right into CWM.in CWM choose "reboot device" and it should be OK
Click to expand...
Click to collapse
Thanks guys fixed it used one click unbrick which worked really well. Tried flashing a rom and a kernel and it did not work before hand. With the one click unbrick it has allowed me to enter download mode again.
One-Click unbrick info: http://www.traemcneely.com/2011/08/...phone-exclamation-point-computer-unbrick-fix/
I'm happy that you could fix it
Sent from my YP-G70 using XDA

S5830 Problem (My Ace stuck into black screen)

Good morning from Greece!
I recently rooted my Galaxy Ace (2.3.3) and today i decided to upgrade it with a custom rom... everything was ok until i have installed Rom Manager Premium apk and just to get into ClockworkMod Recovery Mode. When i clicked at (Into Rom Manager) All ClockworkMod Recoveries it appeared one list with a lot of device names, but mine it was not. I assume that if i click in one of them i will be ok..
I was wrong.. when i clicked Rebbot into recovery mode my phone stuck with a black screen.
I have tried to wake up my phone with many different ways but... i had no luck.
Ps: When i connect my s5830 into a Windows Xp Or Windows 7 PC it appears ''USB Unknown Device'' and yes i have installed the usb drives + Samsung Kies.
Please Help!
Rom Manager on Galaxy ace turns in into a nice shiny
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Return to service center for repair/replacement. Sorry. Next time read on now to install ClockworkMod first.
freeandroid4248 said:
Rom Manager on Galaxy ace turns in into a nice shiny
Return to service center for repair/replacement. Sorry. Next time read on now to install ClockworkMod first.
Click to expand...
Click to collapse
:thumbup:
Sent from my GT-S5830 using xda app-developers app
flash your phone in odin is still have downloadmode flash firmware gb then flash the latest cwm for ace
Sent from my GT-S5830 using Tapatalk 2
its bricked!!
Okey You have BRICKED your phone by one of the famous procedure
Now to get back it in working condition... follow the steps :
1. Download Latest ODIN from Samfirmware, go to this site select your phone model, country and all and download latest firmware and files
2. install Odin and connect your phone to your PC/Laptop via USB cable provided by samsung
3. Remove battery of your phone, Start ODIN
4. Now Keep Pressing Home+Vol+Power button
5. Insert Battery and Close your Eyes
6. it will be a MAGIC, if ODIN detects your phone, now flash the downloaded ROM and enjoy

[Q] No Wifi and Service and Windows wont detect

Hello there!
So I sold my S3 Mini and the buyer asked me to fix his phone. The first problem was that it was stuck in a bootloop and the EFS couldnt be mounted. I got that working and it now boots up normally. Now the problem is that I cant connect to my wifi and it says no service on my cellular. It detects my sim because when I booted it up it asked for the sim lock password.
Another problem is that my Windows wont detect the phone. But it's charging normally. It detected my previous S3 Mini before with no problem. I've even flashed CM11 on it then flash the stock firmware without any problems.
To clarify here are my problems :
1. Cant connect to wifi
2. No service
3. Windows wont detect the phone
The main reason I want it to detect to my phone is to use Odin to flash the stock firmware again. I've tried Mobile Odin but it kept saying to download and install the addons when I've already installed them. Mobile Odin v4.2 if you're wondering. I've also installed the drivers for everything and it wont detect. Thanks for your help.
Sounds like efs is corrupt, try another usb lead to connect to pc, shorter is better.
boomboomer said:
Sounds like efs is corrupt, try another usb lead to connect to pc, shorter is better.
Click to expand...
Click to collapse
Any way to fix it? I got the wifi to work by flashing the stock firmware with Mobile Odin. My IMEI is also not correct.
Restore your efs backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
boomboomer said:
Restore your efs backup.
Click to expand...
Click to collapse

Not booting with blinking screen

Hello, it's 6 month since i using my s6 edge never had any problem , like 1hour ago i took phone wanted to call and went off when and now not booting when i press power button to boot it shows me boot logo and down is light screen but screen is like blinking not able to show in picture can anybody tell me what happend to the phone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i reflesh it with same ROM that it had official one , but still same can anybody help meeee?

			
				
Don't know what's wrong but I can suggest u to install a custom ROM.
tra_dax
I can't access recovery mode ...
Nikusha04 said:
I can't access recovery mode ...
Click to expand...
Click to collapse
If u have any official cm rom for ur device then flash it via Odin.
And if it doesn't work, try out loading the CSC and BL file with the PDA file. This might work.
tra_dax
mine did the exact same thing with that goofy lower half of the screen. It went away after a reboot and I stopped using the phone. Going to upgrade to 5.1.1 on the chance it's a software problem if it happens again.
I took it in guarantee service they said motherboard is dead need replace
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
VooDooKill said:
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
Click to expand...
Click to collapse
Did you try to get Download Mode again?
CrashTestDroid said:
Did you try to get Download Mode again?
Click to expand...
Click to collapse
Yes... I enter to download mode again, I flash official stock rom in three times correctly but always restarts with the bootloop ...

Samsung Galaxy S6 EDGE canĀ“t flash Stock ROM & TWRP!

Hello XDA -Community,
first of all, sorry for my bad English!
I have a Samsung Galaxy S6 EDGE (SM-G925F) / original ROM - (last OTA update) / no branding / without root, that until recently worked perfectly and never made any complaints ... at least until a few days ago while an APP installation (she probably destroyed something) and got stuck in the bootloop .....
First i deleted the cache in recovery mode (I didn't want WIPE, because of data loss) because I read here that I might be able to solve the problem this way, but it didn't work ... then I downloaded the file - G925FXXS6ETI6_G925FDBT6ETJ1_G925FXXU6ERF6_HOME. tar.md5 via SamFirm, and flashed it (according to XDA flashing Thread) with ODIN3 (3.14.4) in DownloadModus on Handy, the only stupid thing is that ODIN aborted / stopped in the Installation Process! Since then the phone only boots up to the Samsung logo, the recovery mode has disappeared and I only get into the download mode! : (((
When i trying to re-flash the firmware, now ODIN3 always stops at boot.img and aborts the process (see Figure 2) with FAIL (different ODIN versions tried, different USB cables / ports connected)!
I also read here in the forum that you could make a backup with TWRP (I took: twrp-3.3.1-0-zerolte.img.tar) to save/recovery my phone-data ... TWRP cannot be done with ODIN3 either play, the preview goes also until recovery.img and then breaks off, again and again with Fail!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Help! What am I doing wrong or is the sMMC chip damaget!?
I've already tried everything and can't get any further, I'm really slowly desperate ... I will only RESCUE my DATA ! Any ideas?
Greeting from Macedonia
Try this https://samfw.com/firmware/SM-G925F/MBM/G925FXXU6ERF5 or this https://samfw.com/firmware/SM-G925F/MBM/G925FXXS6ETI6
Hi! welcome to XDA,
to begin with the motherbord is COOKED
The chip is damaged.
Greetings. Python.

Categories

Resources