Hi,
My sons Samsung Galaxy Tab 10.1 GT-P7510 has decided to wipe its self. On startup it goes straight to ODIN3 Download mode (Protocol v2.1)
I have spent the entire day reading what to do and finally came up with the following:
1. Download Kies ( Which will not connect)
2. Download Odin3 v1.85
3. Download an md5 file ( of which I have tried many and none seem to work)
4. start Odin3 > click PDA and select the md5 file > connect the tab and turn it on (the tab tells me its connected and the 0:[com7] turns yellow) > click start.
it starts off promising by going green, but then it goes red and tells me write : failed.
I have tried a few PIT files just incase and some bootloader files also to without success.
Am I using the right files?
firstly what has my son done!!! and secondly how the hell do I sort this, I am starting to loose my patience.... bescause I have no idea.
Any help very much appreciated
Slavraf
Go to www.sammobile.com and download the proper stock ROM for your tab, extract the zip, then flash the .tar.md5 file inside. You should uninstall kies too if I'm not mistaken. And if your version of Odin doesn't work, try the one I'm using, v1.87. https://www.dropbox.com/s/dib0w993qc284ki/Odin3v1.87.zip?dl=0
Your son probably simple pressed the power and volume buttons and he unintentionally went into recovery mode and wiped the tab I guess, this is the only thing I can think of, tho I don't know how it can completely wipe the tab, its been a long time since I've went into the stock 3e recovery.
Sent from my GT-P7500 using Tapatalk
Thanks
Unfortunately I get the same result..... write error.
Thanks for your suggestion though
Did you try using the Odin version I attached?
I have same problem now... Yesterday my tab crashed and I tried to reboot it but get a bootloop, recovery crashed also, tried to flash stock Rom and recovery through Odin but failed. Tablet showed few error lines, as you can see at picture. Would be very thankful if anyone could help.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
hello guys
while i was glashing ics on my galaxy s2 i9100g
i got this problem
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
please help me out what should i do ? thanks
urgent help needed
ouch, that isn't something you see everyday, were you flashing a bootloader?
were you flashing via odin or cwm?
i was flashing with odin 3 1.85
and i was flashing the PDA file
GT-I9100_XSA_PDAXWLP8_PHONEXXLPS_CSCXSALP4
this file is ICS but when i started nothing happened so i unpluged and rebooted and the screen above posted
rafeeq02 said:
i was flashing with odin 3 1.85
and i was flashing the PDA file
GT-I9100_XSA_PDAXWLP8_PHONEXXLPS_CSCXSALP4
this file is ICS but when i started nothing happened so i unpluged and rebooted and the screen above posted
Click to expand...
Click to collapse
Not for i9100G
Their is no ics for i9100G
Can you get into download mode?
Or samsung service center...
Sent from my GT-I9100 using Tapatalk 2
okay, here's what you do
1. Switch the phone off
2. Hold volume down + menu + power button, until the phone goes into download mode
3. Connect you phone via usb, wait till odin recognizes it (the "COM:" thing turns yellow)
4. Load the pda
5. Flash
If you still don't get it
here's a tutorial video
http://www.youtube.com/watch?feature=player_detailpage&v=hwSF65_d26w#t=15s
and make sure you're using the proper pda, the one that is made for your version.
unsungkhan said:
okay, here's what you do
1. Switch the phone off
2. Hold volume down + menu + power button, until the phone goes into download mode
3. Connect you phone via usb, wait till odin recognizes it (the "COM:" thing turns yellow)
4. Load the pda
5. Flash
If you still don't get it
here's a tutorial video
http://www.youtube.com/watch?feature=player_detailpage&v=hwSF65_d26w#t=15s
and make sure you're using the proper pda, the one that is made for your version.
Click to expand...
Click to collapse
The problem began because he WASN'T using one for his phone. He was attempting to load an I9100 firmware onto his I9100G.
OP, follow this guide: [GUIDE] Fix an unflashable or soft bricked I9100G
And be aware, as sahibunlimited says above; there IS NO ICS for I9100G yet.
Make sure you can enter Download mode ... if yes, then there are some stock ROMs lying around in the Repo! Flash them properly ... and always read/search thoroughly before flashing any stuff ... clearly you're new to all this stuff! Though, happens!
easy solution
just flash a kernel,i had the same problem,flashed a kernel without going to download mode here is link for one:
http://www.mediafire.com/?0nmccnoly0ioqx3
connect your smartphone with pc through usb,then open odin and select the downloaded tar file in pda tab ,dont tick anything else ,then click start,done.your phone will be back.
Good morning from Greece!
I recently rooted my Galaxy Ace (2.3.3) and today i decided to upgrade it with a custom rom... everything was ok until i have installed Rom Manager Premium apk and just to get into ClockworkMod Recovery Mode. When i clicked at (Into Rom Manager) All ClockworkMod Recoveries it appeared one list with a lot of device names, but mine it was not. I assume that if i click in one of them i will be ok..
I was wrong.. when i clicked Rebbot into recovery mode my phone stuck with a black screen.
I have tried to wake up my phone with many different ways but... i had no luck.
Ps: When i connect my s5830 into a Windows Xp Or Windows 7 PC it appears ''USB Unknown Device'' and yes i have installed the usb drives + Samsung Kies.
Please Help!
Rom Manager on Galaxy ace turns in into a nice shiny
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Return to service center for repair/replacement. Sorry. Next time read on now to install ClockworkMod first.
freeandroid4248 said:
Rom Manager on Galaxy ace turns in into a nice shiny
Return to service center for repair/replacement. Sorry. Next time read on now to install ClockworkMod first.
Click to expand...
Click to collapse
:thumbup:
Sent from my GT-S5830 using xda app-developers app
flash your phone in odin is still have downloadmode flash firmware gb then flash the latest cwm for ace
Sent from my GT-S5830 using Tapatalk 2
its bricked!!
Okey You have BRICKED your phone by one of the famous procedure
Now to get back it in working condition... follow the steps :
1. Download Latest ODIN from Samfirmware, go to this site select your phone model, country and all and download latest firmware and files
2. install Odin and connect your phone to your PC/Laptop via USB cable provided by samsung
3. Remove battery of your phone, Start ODIN
4. Now Keep Pressing Home+Vol+Power button
5. Insert Battery and Close your Eyes
6. it will be a MAGIC, if ODIN detects your phone, now flash the downloaded ROM and enjoy
Hi! First i'm sorry for my bad english
I must repair a s5830i, but i don't find a way.
it's go in boot loop when i turn on it, logo-->boot animation-->logo-->at infinite.
Hence i will flash a new stock rom, but when i link the smarthphone at pc(w7) odin ( v3.07 or v1.84) don't
detects the phone.
I have install the samsung driver and i also tried kies but but without results, odin don't detects the phone.
(an other phone like s6 is normally detects).
Therefore how can I do to make it recognize?
( if my english is very bad and you don't understand it, please tell me)
Try another data cable to connect phone with pc and then go to download mod and connect phone to pc
amolgosavi said:
Try another data cable to connect phone with pc and then go to download mod and connect phone to pc
Click to expand...
Click to collapse
With the same cable i have link s6 and s4 and odin detective their, so i have try to flash custom rom from Samsung recovery like explain the tutorial in this forum for unbrixk s5830i
But now i can't go i download mode o recovery, it is freeze in the logo "samsung"
Press vol up and vol down and power button for download mod..
i rewrite beacuse the situation is change, now odin recognize it but when i flash the firmware(pda, csc ,phone) the flash is successful but when the phone reboot i see this in the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
after this the phone return in boot loop logo-->boot animation-->infinite
I found the problem .
I had the userdata corrupt , so I downloaded a new pda which contained a new userdata, i have flashed it and now...it goooo!!
I'm so happy, you can close the thread
Hi, I have someone's old s7 edge which I'd like to use in place of my A10e lol, it still has their password on it tho. The screen seems to have some really weird issues, if I power it on using the home button or power button half the time the screen will be extremely dim/green and half of it will flicker. It looks and works perfectly fine the rest of the time though. I got it to the "recovery booting" screen, but the screen just flashes then goes near-black (still slightly glowing, doesn't turn off) then boots normally about a minute later.
I've tried around 40 times and can't get it to go into recovery mode. I have no idea what I'm doing but I put it in download mode and tried using Odin to flash it with files I got off sammobile. It didn't even connect at first but did after I installed Kies. Odin said it passed, the phone restarted, then just booted back up to the same lock screen. I then tried installing TWRP onto it, which failed saying it couldn't open the serial(com) port? That's where I am now... does anyone know if there's any way to wipe the phone?
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
jwoegerbauer said:
@eggy1
If you've phone's Stock ROM ( ZIP file ) at your fingertips then you simply re-flash phone with this Stock ROM to bring back the phone to its initial state.
If you can access phone by means of ADB/Fastboot then it's really simple to do a clean install of phone's Stock ROM..
Click to expand...
Click to collapse
I can't get adb to detect the phone, but I flashed it successfully with Odin using the files from this thread:
https://forum.xda-developers.com/sprint-s7-edge/how-to/sm-g935p-stock-odin-firmware-t3582821
It now seems to be stuck in a loop of recovery booting into the download mode screen, and occasionally into a caution screen that says no command.. should I try another rom?
@eggy1
Use SamFirm Tool what allows you to manually search and download the Stock ROM matching your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello XDA -Community,
first of all, sorry for my bad English!
I have a Samsung Galaxy S6 EDGE (SM-G925F) / original ROM - (last OTA update) / no branding / without root, that until recently worked perfectly and never made any complaints ... at least until a few days ago while an APP installation (she probably destroyed something) and got stuck in the bootloop .....
First i deleted the cache in recovery mode (I didn't want WIPE, because of data loss) because I read here that I might be able to solve the problem this way, but it didn't work ... then I downloaded the file - G925FXXS6ETI6_G925FDBT6ETJ1_G925FXXU6ERF6_HOME. tar.md5 via SamFirm, and flashed it (according to XDA flashing Thread) with ODIN3 (3.14.4) in DownloadModus on Handy, the only stupid thing is that ODIN aborted / stopped in the Installation Process! Since then the phone only boots up to the Samsung logo, the recovery mode has disappeared and I only get into the download mode! : (((
When i trying to re-flash the firmware, now ODIN3 always stops at boot.img and aborts the process (see Figure 2) with FAIL (different ODIN versions tried, different USB cables / ports connected)!
I also read here in the forum that you could make a backup with TWRP (I took: twrp-3.3.1-0-zerolte.img.tar) to save/recovery my phone-data ... TWRP cannot be done with ODIN3 either play, the preview goes also until recovery.img and then breaks off, again and again with Fail!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please Help! What am I doing wrong or is the sMMC chip damaget!?
I've already tried everything and can't get any further, I'm really slowly desperate ... I will only RESCUE my DATA ! Any ideas?
Greeting from Macedonia
Try this https://samfw.com/firmware/SM-G925F/MBM/G925FXXU6ERF5 or this https://samfw.com/firmware/SM-G925F/MBM/G925FXXS6ETI6
Hi! welcome to XDA,
to begin with the motherbord is COOKED
The chip is damaged.
Greetings. Python.