Related
[ ROM here ] TeamLeader FB05 ROM, 1.3 & 1.2 for the new Galaxy S II LTE HD SHV-E120L
:::::::::::::::::::::::::::::::::::::::::::::::::::::
Updated: FB05 by Teamleader [ latest ROM ]
::::::::::::::::::::::::::::::::::::::::::::::::::::::
NOTE , all these roms are for the E120L only. This phone is pretty new ( last i checked and is only available in Korea so most of the functions may not work on your carrier - or you'll have to find ways around them or just ask on the thread ).
> general instructions for FB05 ROM below curtesy of prodigiez
Flash your phone with tegrak kernel FB05 ( guide here )
Boot into tegrak recovery , back up system and then back up data
Go to you phonememory/tegrak/backup and copy both your system and data back to your computer or other folder. Remember to leave tegrak/backup empty
Then download the backup tar part1 part2
Extract the FB05.rar and you will see 2 files ( system.tegrak.tar and text file )
Place the system.tegrak.tar ( the one you just extracted ) into phonememory/tegrak/backup
Reboot your phone into tegrak recovery mode and choose restore from back up
Once restored , go into stock recovery mode and do a factory reset.
Voila , the new custom FB05 is now running in your phone
I removed all preinstalled chinese app with 520mb ram available and english as first language.
This rom is made by TL and some Chinese Dev from BBS forum. Credit to them. I just make it convenient for non chinese user.
Been using it for few days. No FC , acceptable battery life and able to send sms with default sms app.
In case this rom is not working for you or you dont like it , copy your system.tegrak.tar and data.tegrak.tar back into tegrak folder and restore it.
> thanks to prodigiez
:::::::::::::::::::
Teamleader v1.3
::::::::::::::::::::
Teamleader 1.3 is an update to 1.2, an international version of the stock rom for our phones from Korea. Its made for the Asia market but works for most other areas provided you have the same frequency - check with your telecom providers.
> Root ready: This rom is already rooted ( has superuser + rebooter ).
> Keyboards: English (U.S), Korean, Chinese
> Market, Gmail, Youtube....the usual suspects
> Chinese software for the keyboard (Baidu,...UC Browser ) << remove these with Root Explorer if needed / Freeze with Titanium Backup Pro ( see my list below of junk )
> Samsung Apps << remove these with Root Explorer if needed / Freeze with Titanium Backup Pro ( see my list below of junk )
Safe way: Use Root Explorer copy the Systems / App folder to your pc or SD card just incase you screw things up. Have Odin on standby I think this phone is unbrickable..use stock recovery tool if needed.
Let me know if you have any problems so we can share the list of bugs ( even though I'm not the dev ). Press the Thank button if it helps you, ask questions if your not sure.
::::::::::::::::::::::::::::
How to Flash it - Steps
::::::::::::::::::::::::::::
Happy to report that I got some time today to flash 1.3 on the old MBP.
For those who were asking how to do this
1. Download the file E120L_Teamleader_V1-1.3.7z from here ( let me know if the source is down and I can upload mine somewhere )
( use password - "koxda" .com to extract the file<< without space on the dot com part ). After you extract the file you'll get a Odin useless file ( I assume ), and a tar extension file. You need the tar file to flash with Odin in step 8 below. Put both files in a folder on your desktop or somewhere you can easily fetch with windows explorer.
2. Make sure you have a full battery ( its recommended for better battery performance )
3. Back up important Data with the following options:
(a) Titanium Backup Pro ( if you need all your app data and installs )
(b) SMS Backup & Restore (if you need sms conversations )
(c) Call Logs Backup & Restore ( if you need call history )
(d) You can skip a,b, and c, and just use Tegrak Kernel tool to do a Nanoid backup ( but you need to flash the Tegrak Kernel via Odin found here << thanks to Prodigiez. There's instructions in Korean - please google translate it and choose the appropriate file according to your phone model.
4. Clear your Cache and Davlik Cache ( I did, I think it helps )
5. You'll need a windows pc ( I bootcamped my mac ), you'll need Samsung Drivers, you'll need Odin3 - you can find them here << thanks to Prodigiez. There's instructions in Korean - please google translate it and choose the appropriate file according to your phone model.
6. Install the Samsung Drivers, now connect your phone and windows will do its thing to install the drivers. Your phone will now be visible as a USB device.
7. Install Odin and keep Odin running. Connect your phone. Turn it into download mode , it will look something like this ( see attached photo "downloadmode" )
8. Click on "PDA" in the Odin program, choose the file ROM file ( in my case its "PDA_TeamleaderV1.3.tar ", then hit start. Odin will do its thing, the screen would look something like this ( see attached photo "odinprocress"). Once its done Odin will display something like this ( see attached photo "odinsuccess"). Your phone will reboot, disconnect the cable and you'll have a junk load of apps that you may want to remove. ( refer to my junk load apps section ). Your phone will now have the following build specs ( see attached "1.3about" photo)
Junk Apps that are running on my task manager ( see attached "junkload" photo )
I'll find time later on to clean up the apps. If you plan to remove these apps you need to use Root Explorer but first make a backup of the systems/app folder otherwise you may end up screwing up your system with FCs. Its easy to know which app is a problem. The safest way is to use Titanimum Backup Pro and freeze some apps.
Here's a list of the apps I consider "junk" on 1.3 ( if your a native English speaker that doesn't like bloatware ). Removing these apps is for experts I recommend you freeze them with Titanium - again backup your systems/app folder to avoid FC's.
:::::::::::::::::::::::::::::::::::
JUNK (Bloatware) on Teamleader 1.3 Rom
:::::::::::::::::::::::::::::::::::
Not all this is junk, if you like to have these apps please don't remove them ( experts only ).
> All Share
> Baidu Input
> Whatever the icon is with the twitter like bird
> Photo Editor
> Polaris Office ( I use Documents To Go )
> DMB
> Email ( I use Gmail )
> Kies Air ( its client on the mac has a major security hole that runs fans high - I use AirDroid )
> Home Change ( I use Launch Pro )
> Internet ( I use Dolphin Browser HD )
> Youni SMS
> QQ Security ( really guys?? Probably's stealing my data its out )
> Samsung Apps ( I've got Market + Market Enabler + Galaxy Nexus Build prop)
> Readers Hub
> Tags
> UC ( whatever - browser - crap - I use Dolphin HD )
> Voice Recorder
> There's 2-3 other apps which all have Chinese writings ( all gone )
> The Samsung JUNK. If you are like me and want to really streamline your phone and know exactly what functions you will never use, then here's a safe list ( here ) from the SGS 2 list of safe to remove apps you can try out:
If you want to do nanoid back-ups and CWM style, you will need to flash tegrak kernel using Odin again on the windows box. Then you can do the back-ups.
For now I will stick and test the kernel 1.3 comes with as I was experiencing some horrible battery drain on 1.2, my suspicion was the FC Commando game I was playing and the Alarm ( for some reason I would get FCs when setting up alarms on the clock app ). Once the alarm had gone off the phone would remain very hot until I manually ended the task using AirDroid <<< I highly recommend this app.
I'll keep testing the stock 1.3 kernel and see if my situation is solved and report. ( so far, 3 hours later, my battery is pretty good at 90% ). I still have the junk on my phone I'll remove it this weekend to see if it helps ( I'm sure it will ).
I'll keep testing this out and report, if you guys could post any bugs on here too that would be great. Lets share
:::::::::::::::::::::::::::::::
Photos of what it looks like
:::::::::::::::::::::::::::::::
See them here
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
OLD - Rom Teamleader 1.2 ( flash it the same way as 1.3 )
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Here's a link to the Team Leader 1.2 ROM that's very stable, fast, and good battery life as an alternative to the other stock roms out there like EJ...
Flash this through Odin and # see instructions on the attached screenshot of which button to click ( I'm not Chinese but its not rocket science to figure it out ). It downloads pretty fast inside China I have 150KB/sec...pretty impressive for Shanghai internet speeds.
Go here to download it.
Password for the extracted file is" www#.koapk.com " (remove the # )
If it downloads too slow I'll have to upload my file somewhere and hope not to get cought by the feds
Enjoy and hit that " Thank" button if you find this useful
So why post in the wrong forum ????.
Its not a question .
jjt
Sent from my GT-I9100 using xda premium
it seems download speed is very good outside china
tnx buddy
JJEgan said:
So why post in the wrong forum ????.
Its not a question.
Click to expand...
Click to collapse
I've asked the mods to create a forum for this phone, hopefully it will get moved there so chillax.
Glad the speeds working out well for you mailwork. Let me know how your install works.
Does this work for e120s? Or do I need a different Team Leader rom?
there's v1.3 actually which is good rom... and fixed some fc issues... google around and you will find it..
as requested , i have uploaded this rom to a fast file hosting for free users..
Hey Prodigiez, I haven't experienced any FC issues on v1.2, did they fix the color issues on 1.3 yet? Also if you find an ICS 4.0 rom for this I'd love to get a hook up. I'm starting to miss Serendipity Rom.
Things that could get improved on this phone
----------------------------------------------------
> Power button for shooting photos like on Serendipity
> Silence the camera shutter noise
> Easier access to Data on/off, and other settings where the current the Wifi on/off, Rotate, Bluetooth, and other usual suspects on the top slide down menu on the phone
> Automatic Bluetooth visibility to ON for 30 mins upon turning on Bluetooth ( right now its a 3 click procress - pretty messed up I assume Android would have got it right by now
> Quicker shutdown / Power on
> Samsung qWerty Keyboard ( I miss the big keys even though I got a replacement app )
> Remove the funky icon next to the signal bar ( there's an icon with a no-call looking thingi next t the signal bar and power bar)
> Better audio management ( for some reason the speaker doesn't sound that loud / good ) on playing certain media.
Otherwise, this phone without doubt the best smart phone out there currently.
Sounds good thank you
Sounds good thank you !
@michael1982t,
New HD LTE owner here.
I've flashed 1.2 and am happy to report that SMS is now working properly. -relieved-
However, don't you find the colors are way off? Or maybe the brightness level is just too dim.. (apparently, this was intentional to avoid the phone overheating) Have you heard of any fix for this?
This. Phone. Rocks.
@neverborn,
Glad the rom solved your issues, I haven't experienced any overheating, just the normal heat rise due to playing the new Captian America game too long which is normal.
As for the colors, I didn't notice that on mine, strange. I did notice that the auto brightness under Settings > Display has some issues with dimming the screen on and off. So I have mine manually set to this level ( see attached photo ) which works ok for my battery and eyes.
@ prodigiez , Do you know how to remove this damn icon? See photo attached with pointed arrow, its right next to my phone signal bar.
This. Phone. Rocks.
Click to expand...
Click to collapse
For sure, its a monster like non other !
It's much, much, much dimmer than what it was stock. Pity for such a great screen..
Also, where are you reading about the ROMs? I'm at angeeks and google translate's not doing a very good job on it..
There's several Korean forums, this phone is basically tailored for the Korean market, there's better updates on them than on the Chinese sites I've been looking at. I'll get some links posted when I get time later today.
As for the colors, maybe its a hardware thing on your phone? Not sure. But on mine they look pretty vivid and pretty bright ( I'm on manual, I don't use the auto brightness under display settings as there seems to be a bug with it) , I care more about the battery life cause I use it for web + games + emails + lots of calling (voip + regular ). The display is the only thing that makes this phone eat battery like hell ( next to wifi). I'm sure you'll sort out and adjust it according to your daily needs.
Thanks, that'd be great.
As for the brightness, it was properly bright when I first got it. It was only after I flashed TL 1.2 that it became this dim. There was even a message when I first booted up into TL saying that they intentionally lowered the brightness levels to prevent overheating...
Wish this is better in 1.3
can someone upload screenshots or tutorial what to click on odin please?
thanx
SG2HDLTE said:
can someone upload screenshots or tutorial what to click on odin please?
thanx
Click to expand...
Click to collapse
There's the same as with any Odin install ( something like this ) but you can google for more info:
a) Download the odin zip
b) Download the drivers for your phone, there was a thread about it
c) Download the image that you need to flush
d) Plug in your phone, put it into the recovery mode I think ( on this phone its not the same as the big yellow android guy ).
Here's the full instructions for your specific phone thanks to Prodiquez
://pspmaster.tistory.com/176 << add http to the front. translate this site to english and follow the instructions. there are 3 version there ... E120S E120L E120K and the kernel itself are rooted and comes with superuser... Choose E120L or S I suppose. In your case you just need the drivers + odin zip, you don't need the kernel to flash CWM. But if you want to flush CWM you can grab the files from there. Enjoy
I could easily share the files on here if your scared of all the Korean
By the way, everyone, we are trying to get a forum home for our phone please vote on this post forum.xda-developers.com/showthread.php?p=22096490 << add http to the start.
Hope this helps:
-Open Odin from the package downloaded
-Click the PDA button, pick the PDA......tar from same package
-Get into download mode
-plug in phone, make sure Odin acknowledges
-click Start
--oops, beat me to it
About to try 1.3. Hope it sorts out my brightness issue.
neverborn said:
Hope this helps:
-Open Odin from the package downloaded
-Click the PDA button, pick the PDA......tar from same package
-Get into download mode
-plug in phone, make sure Odin acknowledges
-click Start
--oops, beat me to it
About to try 1.3. Hope it sorts out my brightness issue.
Click to expand...
Click to collapse
Neverborn is probably correct. Youtube it as well, plenty of videos that show how to use Odin. By the way im not a back fan of it, or mainly used it to rescue my old bricked Captivate. If you want the Odin, see the page I gave you a link to the file name is "Odin3_v1.85.zip"
@Neverborn
Let me know how 1.3 turns out, post any issues up on here, I may just update this to be a 1.3 rom post as well as 1.2 and keep the devs busy. Depending on your feedback I may upgrade this or next week if I get time to mess with it.
michael1982t said:
Do you know how to remove this damn icon? See photo attached with pointed arrow, its right next to my phone signal bar.
!
Click to expand...
Click to collapse
It seems that icon means you can not make any video call under current network while the icon is similar to the video call icon in the dialer.
Do TL 1.3 support english?
dannytanky said:
Do TL 1.3 support english?
Click to expand...
Click to collapse
yes
and micheal , that icon is video call icon... mean video call disable...i dont know how to remove it but in my phone it nvr appear since i themed it..
---------- Post added at 02:12 PM ---------- Previous post was at 02:07 PM ----------
kindly vote for sgs2 hd lte at http://forum.xda-developers.com/showthread.php?t=1416406 so we can get our own section
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:
Hello
[INTRO](a little background)
This is a guide for those who want to have their phone in their language but the operating system does not have it built in. You can flash a new ROM that has it or install an app right? Not so much. There are reasons for these methods to fail or simply not work for your situation. My problem was that the bootlegged hardware was not supported by the official ROMs or the Android community. This forum is also riddled with threds that started by people who need to mod something about their phone but have no technical knowhow. There wouldn't be annything wrong with that exept that the awnsers in these threds are something along the lines "Oh you just need to do this thingnemabob" that's it one sentence pointing to a technical slang word that means nothing to anyone but a seasoned developer despite first post DIRECTLY STATES IT WAS MADE BY A PERSON ASKING FOR A STEP BY STEP SOLUTION OR A LINK TO A TUTORIAL!
[pre-procedure]
List of necessary software:
Zipsigner (this goes on your phone)
ADB
text editor of choice( notepad++ recommended)
AIO-Flasher
smali/backsmali (depeding on wether your system files are odexed more on that later)
APKstudio
[installing above software]
Zipsigner
Why you need it?
As you modify your apk files their signature changes. Basically if you change anything about them the phone will no longer recognise these as "its" therfor you need to convince your phone that these are in fact okay with zipsigner.
how to install?
This is an app. If you ever installed anything from Google playstore before than you know how to install it. Go to your Google play store app on your phone. Search for Zipsigner and pick the top app. Agree to all the demands and tap on install
ADB
why you need it?
this is a command line piece of software. these might be very scary to use but don't worry follow the tutorial and you'll be okay. That aside what is it used for. ADB is a powerful tool but we will use it only to copy and paste files to and from Phone
how to install it?
ADB comes packed up with Android Development Kit so the easiest way to install it is to get the ADK
[STEP 1]
Okay so you want to translate your phone for one reason or another. Make backup! Backups are important. You want to have something when you fail to fall back on. Yes "When" you fail. Not "if" you fail. You will screw up but as long as you have a proper backup everything is okay.
You can back up your phone in few different ways.
Hello
[INTRO] (skip if you are not interrested in fluff)
For the past week I lived in Android Hell looking for what I thought would be a simple procedure and I wanted to share my expieriences somewhere so that no one else has to go through this flustrating expierience.
I got two phones (Galaxy S5 and Galaxy S5 mini)and I was taked with translating them. Well It should not be a problem I thought because it should be as easy as going into [settings]>>[region and langages] and choosing Polish. There is no Polish. So that was my first step towards the translating thiese.
[STEP 1]
First thing first backup. I am by no means a talented programmer or modder so I went with Samsung Kies but software didn't recognise neither phone. After fiddling with drivers and a back-and-forth with samsung costumer support we came to conclusion that phones are fake. IMEI of one identifies it as a Blackberry and other as Nokia >_< well okay they still have some sort of Android so there should be a way to translate them anyway. First thing on the agenda is still backup. So I went through a triall and error to get both roms dumped. I was successful with ANDROID AIO FLASHER which was a godsend after I failed time and again to push romdump's INSTALL into the phone. I managed to get one ROM off by now but other Phone still insists on denying me ability to dump the rom because of Segmentation error. but at least I have one rom backed up.
[STEP 2]
Okay I got myself ROM now what? I decided to make a transfusion. Why bother with getting down and dirty when you can just use the work of others. So I downloaded a ROM with same version of the Android OS and begun looking for language pack or something similar. No luck this is not how Android works. After some research I came to the conclusion that in order to make things work I need to basically decompile each and every APK file that refers to system functionality and translate Strings.xml by hand in order to ensure compatibility.
[PRESENT DAY]
this is where I am now. all I wonder if there is a way to add a new file in the APKs with polish in it or should I just translate English "strings.xml" file and set langage to english?
Feel free to point out faults in my logic as well as provide tips and tricks for those of us who bought our phones on the cheap and just want to usethem with language they are comfortable with. I will build up this topic with factual information that I come across and try to make this into a universal guide to Android translation with resources to download. I do this because no one should be subjected to this and there is no decent step by step guide on this forum just disjointed and incompleate information in posths here and there. Belive me I looked both here and Google and after two weeks of finding nothing more than a hints I want to just give back to the community all I found.
Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Reply: for MI Box 3 Enhanced Version
Hi
Even I purchased it recently and can anyone guide me on this please.
samcex said:
Hello, I recently bought an mi box 3rd gen or also called Enhanced Edition, and I want to root it to make it full English UI and uninstall some system apps, could someone help me how to root it, I would be very gratefully, I searched all the internet and nothing still.
It has just 3 ports
1.HDMI Port
2.USB Port
3.Power Port.
Click to expand...
Click to collapse
Found a way !!!
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
venkat_shrine said:
Hi
Even I purchased it recently and can anyone guide me on this please.
Click to expand...
Click to collapse
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , then install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
How did you install Google Services and does Play Store work ?
raducutzu said:
It works great, the hardware is a beast! The only important issue I encountered so far is that sometimes it exits the video player, some other times just pauses the playback on Netflix, every 10 minutes or so. On You Tube it exits fullscreen mode, which can be quite annoying. The only solution I could find is this:
- In Settings (not the Chinese app, but the one that comes inside Shafa Market, or even better, make a google search for "startSettings.apk", download it , the9n install it on your Mi Box, this way you´ll no longer need Shafa Market), go to About the Phone section, and click repeatedly on the Build Version, till you are granted Developer rights.
- Back to Options, go to Developer Options, and change the number of background processes from Standard to None. You´ll have to repeat this last step every time the box reboots, but not after sleep/wake.
Done.
Click to expand...
Click to collapse
samcex said:
How did you install Google Services and does Play Store work ?
Click to expand...
Click to collapse
I suppose you already have a bluetooth/wifi/usb keyboard/air mouse at hand, and switched to English by now, if not, please refer to this post:
http://www.cnx-software.com/2016/04/12/how-to-change-language-to-english-and-install-apps-remotely-on-xiaomi-mi-box-3-enhanced/
I skipped Shafa Market, I downloaded instead startSettings.apk from here:
https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0ahUKEwjb6Ir4pcjNAhUCNhoKHaj6BdcQFgghMAA&url=https%3A%2F%2Fdrive.google.com%2Ffolderview%3Fid%3D0B16bkj0QSkYnfjc1YXQ1YU1sSGVGOHZqY3FjWUNabUVJd1dSTFpSb1BZbnU4cVZQMi1hMUk%26usp%3Dsharing&usg=AFQjCNE5hETwCJgxaa0KE0MtCkzU_tJF-w&sig2=Xk-SKY_nzqTE7aLmkhevZg
Copy it on a pendrive (you might want to copy the other apk-s for the next step, as well), then install it by inserting it in either USB port. You´ll be prompted to allow installation from unknown sources, click yes 允许. It´s all you need to have on your mi box for tweaking, like changing the language, instead of shafa market. Once opened, scroll down to the globe icon, and change it to English.
Then, follow really carefully this step-by-step guide, it´s a bit cumbersome, but it definitely works:
http://flying8pus.blogspot.com.es/
A few pointers, though:
1 - When rooting the device (the same thing here, use a pendrive, download all the apk-s you need on it, and install them from there), be patient, in some cases people had to wait a whole night for the 100% and the victor´s cup to show up. Check it out, and if it´s not done after 10-15 minutes, you´re out of luck, you might as well just go about your day, it will be over at some point. Make sure that in the mi box menu the sleep mode is disabled (set it from 30 minutes, I think, to Never), and don´t touch it, don´t open any apps, let 360Permroot do its magic.
2 - After installing Play Store DON´T OPEN IT! Install afterwards You Tube, then open this one. You´ll be prompted then to download Google Web Services (or something like that) in order to function properly. If you open Play Store before You Tube, you´ll never be prompted, and it will not work, at least that´s what I´ve been told, and I trust the guy (my brother).
Unfortunately, very few apps are recognised by Play Store as compatible with the device (luckily mx player is one of them), but you need it anyway, otherwise some Google services might not work. What I use instead for ease of use is uptodown app market, not even close as abundant as Play Store, but I get by. Once you install an app from there, it will update as soon as a newer version is available, and it´s not as picky as Play Store in terms of compatibility.
Take your time and good luck.
samcex said:
Hi there,
I managed to successfully root my Mi Box 3 w firmware 1.3.114 . Thought I'd share
Tools needed:
- Male to Micro USB Female Converter Connector
- USB stick
Software needed:
- Mi image 1.3.106:
yadi.sk/d/Yvr1jYflm6GZR or
dropbox.com/s/72x76khqjlpekap/MiBOX3_jurassicpark_gitv_1.3.106.386.zip
- Kingo root for windows
kingoapp dot com
First you will need to downgrade the firmware to version 1.3.106.
Extract the contents of the downloaded zip file to a formatted usb tick (Fat32).
(Should be two files: xiaomi_update and update.zip)
Put the stick in your Mi Box and boot in recovery: unplug power, press and hold back + ok button ( or Home and Menu while rebooting ) while plugging the power back in. The remote should be nearby and facing the box. Do not let go of the buttons until it booted in recovery. the flashing should start and finish automatically.
After first boot make sure you disable Intelligent Update.
Second step is to root your box with Kingo.
Enable USB/ADB debugging and reboot (it's right there in the menu under security settings).
Install Kingo root on your pc or laptop and connect your box using a micro usb charging cable. This is where you'll need the adapter. Start Kingo Root, follow instructions and choose 'Root again'.
This will take a minute... done!
Any question let me know I will be glad to help .
All credits to : passerby
Click to expand...
Click to collapse
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
jholland92 said:
Can you verify the model number on your box? Mdz-16-aa or mdz-16-ab? I did a bunch of research into rooting this box months ago and no one had found a way. I'm disappointed in the mdz-16-ab ever since I bought it. It has become more of a paper weight to me.
Click to expand...
Click to collapse
I'm sorry I sold it 8 months ago.
Get rid of "Game play time xxh xxm" notification
Guys my Mibox 4k always has notification
Game play time xxh xxm
At the bottom left corner screen how to get rid of it please help thanks
Hi Guys
I have a IPC8600 CCTV tester that run Android of some version - probably 4.4 or there abouts.
The apps that the manufacturer provides, when he does, have a TLW extension, not the usual APK.
Has anyone heard of that file format?
The device ignores any APK apps - I have thought of just renaming and trying but thought to ask before doing anything silly!
Thanks in advance
David
Ipc 9800 adhs
Hy David. I myself own an IPC Tester and by mistake I unistalled an app (ip-discovery) and now I cant reinstall it. Technical support is very low or inexistent but I found a few apps with TLW extension. I have some more aps with pc2 extension that work on another ipc tester. I can provide you some of them if it helps. Maybe you have some too
---------- Post added at 09:30 PM ---------- Previous post was at 09:23 PM ----------
coolcarstuff said:
Hi Guys
I have a IPC8600 CCTV tester that run Android of some version - probably 4.4 or there abouts.
The apps that the manufacturer provides, when he does, have a TLW extension, not the usual APK.
Has anyone heard of that file format?
The device ignores any APK apps - I have thought of just renaming and trying but thought to ask before doing anything silly!
Thanks in advance
David
Click to expand...
Click to collapse
Hy David. I myself own an IPC Tester and by mistake I unistalled an app (ip-discovery) and now I cant reinstall it. Technical support is very low or inexistent but I found a few apps with TLW extension. I have some more aps with pc2 extension that work on another ipc tester. I can provide you some of them if it helps. Maybe you have some too
adiasterix81 said:
Hy David. I myself own an IPC Tester and by mistake I unistalled an app (ip-discovery) and now I cant reinstall it. Technical support is very low or inexistent but I found a few apps with TLW extension. I have some more aps with pc2 extension that work on another ipc tester. I can provide you some of them if it helps. Maybe you have some too
---------- Post added at 09:30 PM ---------- Previous post was at 09:23 PM ----------
Hy David. I myself own an IPC Tester and by mistake I unistalled an app (ip-discovery) and now I cant reinstall it. Technical support is very low or inexistent but I found a few apps with TLW extension. I have some more aps with pc2 extension that work on another ipc tester. I can provide you some of them if it helps. Maybe you have some too
Click to expand...
Click to collapse
hi even to me I would need help I was lying problem
Hi I have a IPC8600 too and would like to modify the software/OS such that when I first turn on the device, the logo (wording IPC Tester) will be another picture or wording of my choice. Is it possible to do this? Any direction or advice is appreciated.
IPC-8600 Missing apps/firmware
I also have the IPC-8600, I can load .APKs from the SD but its missing apps to work CCTV HD Cameras/ TurboHD cameras etc. I haven't been able to find a single .apk or a firmware to flash and actually use this IPC tester, the IP camera part works fine though.
Help would be greatly appreciated!
hi I have IPC tester and my touch screen is looked now is impossible to go to the software
Big old bump. Nothing on this front since 2019? (I'm going to deeply regret not searching better before posting this...)
Jilde said:
IPC-8600 Missing apps/firmware
I also have the IPC-8600, I can load .APKs from the SD but its missing apps to work CCTV HD Cameras/ TurboHD cameras etc. I haven't been able to find a single .apk or a firmware to flash and actually use this IPC tester, the IP camera part works fine though.
Help would be greatly appreciated!
Click to expand...
Click to collapse
Any luck? I've 1600adh searching for ahd/cvi/tvi related apk, no luck
Hello friend, I am reading about your problem with the IPC8600 CCTV tester, and I want to ask you, have you tried Ajax systems? I had a similar problem with an old camera at the entrance of my house but when I updated with the new software (I installed Ajax system) to be able to see all my cameras at the same time on my mobile, I think that updating solved my issue, I suspect that something similar may be happening to you, I do not know if there is any other way to fix it or what is the technical nature of the problem but that solution worked for me
Software update
www.cctvtester.com
This is the link to the IPC 9800ADH plus firmware.
1. Remove the SD Card
2. Connect SD to laptop
3. Place APK file in Update folder
4. Place SD with Updated APK in the CCTV Tester.
5. Boot/Power-up the device.
This automatically updates the unit.
I would imagine you can place new apps in other folders doing the same.
This fixed my "No Touchscreen" problem.
Hi Guys,
We have also IPC8600 and after a factory default the tester starts but no icons-apps at the menus.
We try with <<Place SD with Updated APK in the CCTV Tester>> as @John Mulvihill suggest but does not This automatically updates the unit.
Also we found that with POWER + Menu + Zoom Key the tester goes to recovery mode....
We see the Android logo and say Installing System Update... But after 5' restart and we dont have anything again... no icons-apps at the menus.
Any help?
Hi Guys,
After alot of tries I manage to restore my device by making folder inside sdcard called wlt and inside I put a file called wipedata. Basically is a txt file that inside have a line only that right wipedata... without the file extesion .txt. After that recovery mode by power + menu + zoom and after 6' the device start with all the apps and menu.
Maybe someone will use it at the future.
Thanks.
intelcom said:
Hi Guys,
After alot of tries I manage to restore my device by making folder inside sdcard called wlt and inside I put a file called wipedata. Basically is a txt file that inside have a line only that right wipedata... without the file extesion .txt. After that recovery mode by power + menu + zoom and after 6' the device start with all the apps and menu.
Maybe someone will use it at the future.
Thanks.
Click to expand...
Click to collapse
I have a IPC-8600. Screen went black while enabling POE output. When connection the HDMI to a monitor the IPC is booting with Installing system update message and the andriod logo. Somethimes it boots with the start screen but I can't select anything (only picture on external monitor). Tried the SD card with wipedata no result. Do I have to put any command in the wipedata file? I think the flash memory is damaged. Thanks
After few hours the IPC booted normal again but the network interface doesn't work anymore. The IC behind the network port is realy HOT ! The IPC is useles this way.
I know this is an old thread, but I pulled out my IPC8600 with the hopes of making it more useful and had some success. I was about to drop APK files for Android 4.4 into the update folder, install them from the files app and they worked! Android 5.0 APKs do not work. So far I have working (arm versions):
- Hik-Connect - com.hikvision.hikconnect_4.14.1.0407-115_minAPI19(arm64-v8a,armeabi-v7a)
- Chrome - com.android.chrome_74.0.3729.112-372911200_minAPI19(armeabi-v7a)
- Firefox - org.mozilla.firefox_68.11.0-2015711849_minAPI16
- Fing (network scanner) - com.overlook.android.fing_8.2.4-8241_minAPI16(arm64-v8a,armeabi,armeabi-v7a,mips,mips64,x86,x86_64)
- Network Scanner - Network Scanner_2.6.6_apkcombo.com
As you can imagine, I'm pretty happy with the results. I was not able to get Google play store and services working, but that's not really necessary as side-loading from the SD card (with the right app version) is easy.
Thanks.