Sooplus Kernel for Nexus 5
Changelog & FeaturesRebased on kernel_msm lollipop mr1 kernel sourcebricked_hotplugmsm_sleeper hotplugqcom mpdecision hotplugBattery life extendersweep2wake and doubletap2wakeoption to disable wake functions with timeout or power buttonUSB fastchargeFull f2fs support (latest upstream updates) fstab option in Aroma installerNTFS R/W & exFAT supportMultirom Supportcolor and gamma supportfaux sound supportwake gestures supportVoltage controlAroma installer (All options can select in Aroma)
Kernel is for AOSP, CM12 & stock based Roms
Downloads
Sooplus Folder
Old Downloads
Sooplus 1.0.1md5: baa76249131fa0609a36f44db1c417faSooplus 1.0.2md5: 1849475166d1e972382ea9ae798fa510Sooplus 3.4.0md5: 88b5b96048fe07d3edf22492f7df1289Sooplus 3.4.1md5: a5ac1cb2c14b152e1deaae3e58d8af22
Suggestions and feedback always welcome...I cherry-pick from all the devs in XDA, Thanks to all XDA DevsSpecial thanks to @showp1984, @flar2, @franciscofranco, @faux123, @Cl3Kener, @neobuddy89
Kernel Source
General DisclaimerI'm not responsible if you brick your device.
You flash this Kernel at your own risk.
XDA:DevDB Information
Sooplus Kernel for Nexus 5, Kernel for the Google Nexus 5
Contributors
soorajj
Source Code: https://github.com/soorajj
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 03.18
Stable Release Date: 2015-03-18
Created 2014-11-18
Last Updated 2015-03-19
New Toy xD always good
Downloaded.... flash and test now ?
keep calm and have a Nexus
First test.... kernel runs great [emoji106]
But sweep2sleep doesn't work for me.
Tested all combinations but no luck.
sweep2wake gesture swipe up set in aroma but have swipe left to right to wake screen
keep calm and have a Nexus
1haumann1 said:
First test.... kernel runs great [emoji106]
But sweep2sleep doesn't work for me.
Tested all combinations but no luck.
sweep2wake gesture swipe up set in aroma but have swipe left to right to wake screen
keep calm and have a Nexus
Click to expand...
Click to collapse
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
MidnightDevil said:
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
Click to expand...
Click to collapse
Screenshots show settings in trickster [emoji6]
keep calm and have a Nexus
Sooplus version 1.0.1:
Sooplus version 1.0.1 is released.
Changelog: Github commits
So far so good, nice solid start.
Thank you
Sooplus version 1.0.2:
Sooplus version 1.0.2 is released.
Changelog
Sooplus version 1.0.3 is released.
Sooplus version 1.0.3 is released.
Compiled with Sabermod 4.9.3 toolchain: with Graphite opt enabled.
Changelog
soorajj said:
Sooplus version 1.0.3 is released.
Compiled with Sabermod 4.9.3 toolchain: with Graphite opt enabled.
Changelog
Click to expand...
Click to collapse
Thanks, gonna take it for a spin
Sorry for stupid question, but what is sbermod graphite mod?
also, your and elemextalX kernel don't work on my phone, dfq...
at elementalx you need to flash the stock kernel before. for me it works with dirty flashes too but who knows
iplexus4 said:
Sorry for stupid question, but what is sbermod graphite mod?
also, your and elemextalX kernel don't work on my phone, dfq...
Click to expand...
Click to collapse
In simply words - sabermod and graphite are optimizations for Android, making kernel and ROMs faster.
Can I add my own color profile to Aroma installer? https://drive.google.com/open?id=0B87i-uIvsOzONGk2aUp6dExpZlE&authuser=0
I'm feeling interested to test this kernel. Let's see if it can beat the 4672 PCMark score from Hellscore!
Bionic patches would be a nice feature to your kernel (take a look at xTraSmooth) =D
Deleted
otavioricciotti said:
Can I add my own color profile to Aroma installer? https://drive.google.com/open?id=0B87i-uIvsOzONGk2aUp6dExpZlE&authuser=0
I'm feeling interested to test this kernel. Let's see if it can beat the 4672 PCMark score from Hellscore!
Bionic patches would be a nice feature to your kernel (take a look at xTraSmooth) =D
Click to expand...
Click to collapse
ok i will try to add your color profile on next release
New kernel released
Changelog:
reworked based on cm source (I like cm source, why i don't know)
Build using GCC 4.8, no additional optimization flags! let's see how it will work!!
Added only my favourite features...
Detailed changelog
Last 24 hours with this kernel has been great (paired with latest Euphoria). Found my new DD combo ??
MidnightDevil said:
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
Click to expand...
Click to collapse
you could use them with trickster...with premium version of trickster there is much more you could do to an existing rom
Related
A friend requested some feature in Code Blue kernel so I cherry-pick and share with them.
I decided to share with you guys too
Based from Code Blue kernel sources.
Features:
Use Calkulin's method with @rachanta 's help
Kernel upgraded to 3.4.103
Add ZEN I/O scheduler
Bluesleep upgrade (for bluetooth) and many others.. refer github commits!
For v1.5.1 and above I will use Calkulin's library patch so that this AOSP based kernel could be used on CM based ROM
DT2W is now supported by Code Blue.
To enable the DT2W however you need to use Flash UKM (Universal Kernel Manager) use Synapse to enable the D2TW feature.
Trickster cannot be used as for now.
v1.7 (13 SEP 2014)
download
Previous versions:
v1.5.1 (20 AUG 2014)
download
v1.4 (18 AUG 2014)
download
v1.3 (14 AUG 2014)
download
v1.1 (6 AUG 2014)
download
credits:
the original code blue kernel maintainer, @eng.stk - refer Code Blue kernel here and here
source: github
XDA:DevDB Information
Blue Kelisa Kernel, Kernel for the Google Nexus 5
Contributors
mnajem
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v1.7
Stable Release Date: 2014-09-13
Created 2014-08-06
Last Updated 2014-09-13
Reserved
Reserved
****So always wanted this.*****
Code blue kernel with STW enabled. You are generous to do this and of course eng.STK for orig code blue, trinity, uber, Franco, labodj, faux and everyone else for the great list of kernels for the N5
Please give the proper credits to the original developer @eng.stk is his nickname
And the name of the kernel is Code_Blue just trying to help you make the things right
And post a link to the original kernel's thread
Cheers mate
marf28101995 said:
Please give the proper credits to the original developer @eng.stk is his nickname
And the name of the kernel is Code_Blue just trying to help you make the things right
And post a link to the original kernel's thread
Cheers mate
Click to expand...
Click to collapse
+1
Cheers
Does this kernel have time wake out and power key suspend too?
GtrCraft said:
Does this kernel have time wake out and power key suspend too?
Click to expand...
Click to collapse
Yes
How bout for the L preview? I'd love to see code_blue with dt2w
mnajem said:
Yes
Click to expand...
Click to collapse
Just tried, no power key suspend
GtrCraft said:
Just tried, no power key suspend
Click to expand...
Click to collapse
Ok noted. Since I already enabled it in the kernel configuration, seems that one didn't worked.
Thanks for trying.
ekowanz said:
How bout for the L preview? I'd love to see code_blue with dt2w
Click to expand...
Click to collapse
I don't use L preview.. maybe someone else interested to port it.
I'm taking a stand to wait until the stable L release published.
==deleted==
Will this be regularly updated?
Sent from my Nexus 5 using XDA Free mobile app
donnabelmartie said:
Will this be regularly updated?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I'm using this kernel myself so I believe it's yes
mnajem said:
Yes
Click to expand...
Click to collapse
I don't see the timeout feature, in ElementalX it is configured through Aroma installer. How can I enable that?
Sent from my Nexus 5 using Tapatalk
dt2w with timeout and power key suspend like elementalx will be better [emoji4] [emoji106]
n5sk7.2.Robbie-08.12gapps199art
EX1.04twrp2.7.1.0rd2.08
----------------------------------------------------------------------------
have doubts about Slim? click here:
http://slimroms.net/index.php/faq
GialanG said:
I don't see the timeout feature, in ElementalX it is configured through Aroma installer. How can I enable that?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I will get to you once I figured that out.
v1.3 (14 AUG 2014)
Add SmartMax, ElementalX, OndemandPlus governors
Add Intelliplug from Faux
Add Advanced MPdecision hotplug from Bricked Kernel
DOWNLOAD
Thank you for doing this! this is exactly what I wanted to see in blu, its like you read my mind!
Will be giving this a shot!
thanks!
This is an AOSP based kernel zipped with Calkulin's Method of libraries inclusion (for version with tagged with ANY on its file name).
It's developed from AOSP sources from scratch with many cherry-picks from other kernels.
Features:
Sync with kernel 3.4.104
DoubleTap2Wake, Swipe2Sleep, Swipe2Wake
ZEN, BFQ I/O schedulers
Blueactive, SmartMax, ElementalX,Ondemandplus governors added
Intelliplug HOT plug CPU
USB Fast Charge
Change:
-update to kernel 3.4.104
-add OndemandPlus governor
v3.0 5 NOV 2014 (ANY - CM/AOSP)
download
Previous releases:
v2.1 21 AUG 2014 (ANY - CM/AOSP)
download
v2.0 (ANY - CM/AOSP)
download
v1.0 (ANY - CM/AOSP)
download
v1.0 (AOSP ONLY)
download
Credits:
@rashanta
@eng.stk
@faux123
@show-p1984
and many others!
Kernel source : Github
XDA:DevDB Information
JERUNG KERNEL, Kernel for the Google Nexus 5
Contributors
mnajem
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v3.0
Stable Release Date: 2014-11-05
Created 2014-08-21
Last Updated 2014-11-05
Reserved
Reserved
I'll Give her a shot Thank You for all your time and effort..........:good:
O Yeahhh FIRST....lol
Tried to download multiple times it's only 8.39mgs..? Something definitely wrong..?
I'll Try Again Later......
Im down for a drive!
Philly Jim said:
I'll Give her a shot Thank You for all your time and effort..........:good:
O Yeahhh FIRST....lol
Tried to download multiple times it's only 8.39mgs..? Something definitely wrong..?
I'll Try Again Later......
Click to expand...
Click to collapse
Yes, for now it's very small.
Eventually it'll grow when more commits come in
Check the MD5SUM too
Code:
586092a951e67f749001c2681805b706 Jerung-ANY-v1.0.zip
aafc02f373f759574e6c7cee2b4b6695 Jerung-ANY-v2.0.zip
89bd54973eaa9e209988865141d8e8e8 Jerung-ANY-v2.1.zip
Running great with Paranoid Rastakat.
Cpu gov stk kernel settings working great. Great job
razrlover said:
Running great with Paranoid Rastakat.
Cpu gov stk kernel settings working great. Great job
Click to expand...
Click to collapse
Good to know :victory:
Does it has features to disable dt2w/s2w with power button?
Had some issues with AICP. wanted to test both and report. I had screen lock up and some shuddering when multitasking.
Hard reset and just wiped and flashed another ROM.
Any ideas. I used same process as with Rastakat. Thanks
Works fine with mahdi. Please add support for battery LED always on.
razrlover said:
Had some issues with AICP. wanted to test both and report. I had screen lock up and some shuddering when multitasking.
Hard reset and just wiped and flashed another ROM.
Any ideas. I used same process as with Rastakat. Thanks
Click to expand...
Click to collapse
It seems that the zip patch does not work well (i think) with some ROMs.
Since it's based on AOSP sources, with just 10 library files inclusion.
Usually if I see a ROM saying it's upgrading packages (as if we're flashing newer ROM) I know there'll be a lot of FCs.
Seems I'm not the only one.
What do you think, should we continuing releasing this method (advertise with CM ROM capable) or enough with AOSP.
ej8989 said:
Works fine with mahdi. Please add support for battery LED always on.
Click to expand...
Click to collapse
Any kernel that does that ? Controlling LED.
afaik ROM does that. please assist me finding the patch I'll try to implement it.
mnajem said:
Any kernel that does that ? Controlling LED.
afaik ROM does that. please assist me finding the patch I'll try to implement it.
Click to expand...
Click to collapse
Is this it? https://github.com/ThinkingBridge/p...mmit/c3009ee89ee0541fdacd99f608b1a993d69b3b9d
ej8989 said:
Is this it? https://github.com/ThinkingBridge/p...mmit/c3009ee89ee0541fdacd99f608b1a993d69b3b9d
Click to expand...
Click to collapse
Patched.
Try this, not sure if this is what you want.
download v2.2
mnajem said:
Patched.
Try this, not sure if this is what you want.
download v2.2
Click to expand...
Click to collapse
It works! :thumbup:
Does this kernel have faux sound and color support?
yyz71 said:
Does this kernel have faux sound and color support?
Click to expand...
Click to collapse
Not yet.
mnajem said:
What do you think, should we continuing releasing this method (advertise with CM ROM capable) or enough with AOSP.
Click to expand...
Click to collapse
I prefer only AOSP. BTW the kernel works fine on DU with ART (some lags on Dalvik present).
Waiting for faux and colors.
What is this:
This is Stuxnet a custom kernel for Android, this kernel focuses on simplicity and stabiilty. All features on this kernel are based on long hours of testing and all are thoroughly tested to give end users the best experience for their device.
Stuxnet is mostly stock with optimizations and features that are often used by users that are not affecting performance on their device. Future development of this kernel will focus on Performance and Stability.
So enough with the intro and start testing this on your device.
Features:
Based on Android 5.0 AOSP source
Mainstream Linux version 3.4+
SaberMod arm-eabi-4.9 Toolchain
Fully Optimized Stock Kernel
Double Tap to wake
Sound Control
Gamma Control
Thermal Enhancements
Check SOURCE for full changelog
How To's:
Install in recovery
Reboot
Kiss yo' mama
***** Slap an iPhone user.. Smile!
Enjoy
Credits:
Google
Linux
Sabermod @sparksco @MikeCriggs
SimpleAOSP @BaNkS @snak3ater @CallMeAldy @Chochiwpg @apatal
and all custom kernel devs
Downloads:
CLICK ME
"This kernel has 2 builds, Stable and Exp(experimental). For the experimental builds, take note that "experimental" means its not stable so expect the unexpected. But for Stable, it's direct to the point saying what it is."
Build Stuxnet from source:
Code:
repo init -u https://github.com/Stuxnet-Kernel/stuxnet_manifest -b master && repo sync -j4 --no-clone-bundle
After syncing go to build folder and change the toolchain path on the scripts (stable for stable, etc.):
Code:
EXPORT CROSS_COMPILE="Point this to your existing toolchain"
After changing the path run the build command:
Code:
./mako-stable.sh
Finished product will be located inside mako/zip
For building CM kernel, do this commands after syncing the source:
Code:
cd mako && git branch cm-12 && git checkout cm-12 && git pull https://github.com/Stuxnet-Kernel/kernel_mako cm-12
Then while still on mako folder:
Code:
cd ../build && ./mako-cm.sh
Changelogs:
v1.0
Code:
- Initial Release
v2.0
Code:
- kexec patch
- voltage control
- halfbreed calibration
v3.0
Code:
- rework voltage control
- revert halfbreed calibration
- added governor tweaks
v4.0
Code:
- adjusted voltages
- enabled LZ4 compression
v4.1
Code:
- Linux 3.4.105
v4.2
Code:
- Entropy tweaks
- Check [B][URL="https://github.com/emceethemouth/kernel_mako/commits/Stuxnet"]GIT[/URL][/B] for full changelog
v4.3
Code:
- Lower down min frequency to 192Mhz
- Added CM12 support
v4.4
Code:
- Latest Google lollipop changes
v4.5
Code:
- Removed 192Mhz (seems I need to further check this one)
- added fsync control
v5.0
Code:
- reworked optimizations
- latest SM 4.9.3 built straight from SaberMod repo
- BFQ v7r7 latest
[/HIDE]
If I still had my N4 I know what I'd be flashing. Keep up the hard work @Gnome if this kernel is anything like your Arkenstone kernel it will be stable and very smooth. Enjoy guys/gals. :good:
Thanks for this new kernel, I flashed it and everything works smoothly ( 26126 in Antutu ), but I miss voltage control, will you add it in next builds ?
blusydays said:
Thanks for this new kernel, I flashed it and everything works smoothly ( 26126 in Antutu ), but I miss voltage control, will you add it in next builds ?
Click to expand...
Click to collapse
Voltage control is cool but some users really doesn't know how to use it, then if they screw up they go "blame it on the dev." Lol! Anyways I might release another version that has that just to be safe, soon if time permits.
Finally something for lollipop. Subscribed. Flashing.
are you using mpdesicion by qualcomm?
lalo20 said:
are you using mpdesicion by qualcomm?
Click to expand...
Click to collapse
Yes, no other hotplugs. Im not comfortable with others. Thats just me, but others are good too.
New kernels for Nexus 4 again haha..
praise 1 beer for you, @Gnome
Gnome said:
Yes, no other hotplugs. Im not comfortable with others. Thats just me, but others are good too.
Click to expand...
Click to collapse
great, qualcomm has the best hotplug, flashing now
Hey Francis! Does this have USB fast charge?
Edit : checked your git. It does!
Thanks!
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Any faux sound patches?
Also what's different with experimental kernel?
CallMeAldy said:
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Click to expand...
Click to collapse
Yes. I just flashed and it transformed
Horizone said:
Any faux sound patches?
Also what's different with experimental kernel?
Click to expand...
Click to collapse
It has voltage control and other stuff.
CallMeAldy said:
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Click to expand...
Click to collapse
Yes it'll make you sing this song.
http://www.youtube.com/watch?v=mhujM7T1_fQ
I am assuming we use ukm to tweak the kernel? BTW great work! Great to see an awesome dev make another kernel!
v2.0 is up changelog's on 2nd post.
@oxxshadow you can use and kernel daemon you like, I personally use trickster, but any will do.
Hello! First of all, nice kernel! It works Smooth!!!
But I have 2 questions. How I can change the colors? I don't like this kernel colors, I prefer stock. And... How I can activate the doubletap_to_wake?
Thanks a lot!
Asce92 said:
Hello! First of all, nice kernel! It works Smooth!!!
But I have 2 questions. How I can change the colors? I don't like this kernel colors, I prefer stock. And... How I can activate the doubletap_to_wake?
Thanks a lot!
Click to expand...
Click to collapse
trickstermod...faux kernel control
u can do both
For People who likes experimental builds, a new build is up. Changes just check it out HERE.
DOWNLOAD
Hi guys,
I want to present you freshly cooked fork of Code_Blue kernel compiled with UBERTC 4.9.3 and flags from Uber Kernel
Download:
REMOVED
Changelog:
31032015
Build with latest myself compiled UBERTC
31032015
Merged flags from Code_Blue
Merged lastest commits
30032015
Initial release
Credits:
eng.stk for kernel and flashable zip
Cl3Kener for toolchain and kernel flags
me for free time
If you want to support student and his work:
XDA:DevDB Information
[KERNEL][UBERTC 4.9.3][Lollipop 5.1] Black Moon, Kernel for the Google Nexus 5
Contributors
mastero9017
Source Code: https://github.com/mastero9017/Black_Moon
Kernel Special Features:
Version Information
Status: Stable
Created 2015-04-01
Last Updated 2015-04-02
nyyc !!
based on 919r code blue? can i flash your kernel on my code blue kernel? any changelogs or features?
Eltorito94 said:
based on 919r code blue? can i flash your kernel on my code blue kernel? any changelogs or features?
Click to expand...
Click to collapse
It's newer than what you get in r919, changelog is on eng.stk github as always. Main feature is toolchain and flags i used. You can flash over normal Code_blue.
Nice, will try it soon Piąteczka
Nice! I've been looking for this. Trying this on @bokbokan euphoria build :good:
Works like charme on latest Optistock with data + cache on f2fs
Madsunable said:
Works like charme on latest Optistock with data + cache on f2fs
Click to expand...
Click to collapse
+1 using this kernel with rastatop.
Working well with euphoria latest..
Hi Mastero
this kernel sounds good
i'm on cataclysm 5.1 with latest uber kernel 03/20
please can you add more information?
Faux sound etc.
is this kernel synapse and UKM compatible?
or has it the .cfg file like uber kernel (flash and forgett)?
thanks in advance
cheers
@danmaman
It's newer than what you get in r919, changelog is on eng.stk github as always. Main feature is toolchain and flags i used. You can flash over normal Code_blue.
Click to expand...
Click to collapse
MotoFlasher said:
@danmaman
View attachment 3237787
View attachment 3237788
Click to expand...
Click to collapse
Dankeschön:good:
Is this any better than the original code blue in terms of battery/performance?
Tanged said:
Is this any better than the original code blue in terms of battery/performance?
Click to expand...
Click to collapse
just as good...if not better
i'm testing since in the morning
liquid smooth.....and battery friendly with stock settings
i like the mix between/with... ubertc and code_blue
thanks mastero and all other kernel Dev's:good:
Hi guys!
New build is online. I took more flags from original code_blue and merged 3 commits from today.
Tomorrow i will post version with myself compiled UBERTC, because Cl3Kener made some new changes to it.
And we want the best of the best, don't we?
Enjoy!
Thanks for 650 downloads in 24h! :good:
danmaman said:
Hi Mastero
this kernel sounds good
i'm on cataclysm 5.1 with latest uber kernel 03/20
please can you add more information?
Faux sound etc.
is this kernel synapse and UKM compatible?
or has it the .cfg file like uber kernel (flash and forgett)?
thanks in advance
cheers
Click to expand...
Click to collapse
For now, it's only custom build of Code_Blue for better optimization, no additional changes.
Tanged said:
Is this any better than the original code blue in terms of battery/performance?
Click to expand...
Click to collapse
Main reason why i post this. For me those builds feel at least smoother.
danmaman said:
just as good...if not better
i'm testing since in the morning
liquid smooth.....and battery friendly with stock settings
i like the mix between/with... ubertc and code_blue
thanks mastero and all other kernel Dev's:good:
Click to expand...
Click to collapse
Be sure to try new build
Do you use the latest UBERTC 4.9.3?
Assa551N said:
Do you use the latest UBERTC 4.9.3?
Click to expand...
Click to collapse
I use latest compiled precompiled from 23/03. Tomorrow i will compile it from sources to merge latest changes.
Awesome... My 2 favorite kernels lol how ironic. I'm anxious to see the thing progress
Kroniq said:
Awesome... My 2 favorite kernels lol how ironic. I'm anxious to see the thing progress
Click to expand...
Click to collapse
It's more like toolchain rather than the uber kernel but whatever liking this toolchain/kernel combo.
Hi guys again
I just got message from eng.stk and he doesn't want to use Code_Blue name outside his thread, but i am going to keep this kernel/toolchain combo.
I will change name tomorrow, you can propose them in this thread. Thanks in advance
All current builds are under the testing phase and are pretested before a publicly available test release.
Previously from the Galaxy Nexus
Source : https://github.com/nixholas/msm-nexus5
UNTESTED Builds (Please report to me if it boots or if it doesn't and also, the stability of it.)
v0.2 Test Alpha : Bootloop.
Tested Builds:
v0.1 Alpha : Google Drive
Nixholas' File Site
XDA:DevDB Information
Nixholas's Modded Kernel, Kernel for the Google Nexus 5
Contributors
nixholas
Source Code: https://github.com/nixholas/msm-nexus5
Kernel Special Features:
Version Information
Status: Alpha
Created 2015-10-28
Last Updated 2015-10-28
Code:
[COLOR="Red"][B]DISCLAIMER[/B]
This changelog's released versions are final.
Changelogs for new versions will be available here
but they won't have a fixed changelog until an actual release.
The point of having the future changelogs here is to reduce speculation.
[/COLOR]
// Changelog
0.1
Initial Build
Implement F2FS Support from the latest upstream revision (Inactive)
0.2 Test (Untested)
F2FS Activated
0.3
Dolby DAP Implementation
CPU Voltage Control added
Optimised ARM RWSEM Algorithm
Fsync is now supported and implemented
4 Minor Tweaks
Thanks for the kernel... it is always nice to see development on Legendary Nexus 5... will give this a shot.. perhaps a brief changelog would be very helpful.
Is it you, Amperific? Nice to see your kernel for the Hammerhead. Any words about features?
pianistaPL said:
Is it you, Amperific? Nice to see your kernel for the Hammerhead. Any words about features?
Click to expand...
Click to collapse
Greetings, no feature is the best feature.
I'll focus on stability this time round. But if stability is fine, then I will go ahead with adding more features.
nixholas said:
Code:
[COLOR="Red"][B]DISCLAIMER[/B]
This changelog's released versions are final.
Changelogs for new versions will be available here
but they won't have a fixed changelog until an actual release.
The point of having the future changelogs here is to reduce speculation.
[/COLOR]
// Changelog
0.1
Initial Build
Implement F2FS Support from the latest upstream revision (Inactive)
0.2 Test (Untested)
F2FS Activated
0.3
Dolby DAP Implementation
CPU Voltage Control added
Optimised ARM RWSEM Algorithm
Fsync is now supported and implemented
4 Minor Tweaks
Click to expand...
Click to collapse
Hi,
Have you released version 0.3? If so, where is the download link please?
Thanks!
juv3nal said:
Hi,
Have you released version 0.3? If so, where is the download link please?
Thanks!
Click to expand...
Click to collapse
I haven't released 0.3 yet. But if you're keen on getting it immediately, let me know if 0.2 works!
Sent from my SM-G925F using Tapatalk
nixholas said:
I haven't released 0.3 yet. But if you're keen on getting it immediately, let me know if 0.2 works!
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
Sure! Can I just flash over my current kernel? (Hellscore)
juv3nal said:
Sure! Can I just flash over my current kernel? (Hellscore)
Click to expand...
Click to collapse
I recommend a wipe in your caches. There may be a probable chance of a bootloop.
nixholas said:
I haven't released 0.3 yet. But if you're keen on getting it immediately, let me know if 0.2 works!
Sent from my SM-G925F using Tapatalk
Click to expand...
Click to collapse
I've tried it...unfortunately it didn't work...bootloop on the Google logo.
I flashed it over my current kernel and cleared cache and data.
Everything is stable i dont see any FCs or any restarts with this kernel, again needs a lot of features so still waiting for 0.3 to try as daily kernel
Features?
wake gestures?
morfances said:
Features?
wake gestures?
Click to expand...
Click to collapse
Like I said, stability first.
Once I get over that, I'll peacefully move on to features.
One more thing,
I need a few more days (If Kernel panic for swap exists I'll have to delay till Next week) to get 0.3 up and running
Sent from my SM-N920C using Tapatalk
Whoa Amperific ! Nice to meet you again in N5 thread. I'll keep watching this thread for more updates