What is this:
This is Stuxnet a custom kernel for Android, this kernel focuses on simplicity and stabiilty. All features on this kernel are based on long hours of testing and all are thoroughly tested to give end users the best experience for their device.
Stuxnet is mostly stock with optimizations and features that are often used by users that are not affecting performance on their device. Future development of this kernel will focus on Performance and Stability.
So enough with the intro and start testing this on your device.
Features:
Based on Android 5.0 AOSP source
Mainstream Linux version 3.4+
SaberMod arm-eabi-4.9 Toolchain
Fully Optimized Stock Kernel
Double Tap to wake
Sound Control
Gamma Control
Thermal Enhancements
Check SOURCE for full changelog
How To's:
Install in recovery
Reboot
Kiss yo' mama
***** Slap an iPhone user.. Smile!
Enjoy
Credits:
Google
Linux
Sabermod @sparksco @MikeCriggs
SimpleAOSP @BaNkS @snak3ater @CallMeAldy @Chochiwpg @apatal
and all custom kernel devs
Downloads:
CLICK ME
"This kernel has 2 builds, Stable and Exp(experimental). For the experimental builds, take note that "experimental" means its not stable so expect the unexpected. But for Stable, it's direct to the point saying what it is."
Build Stuxnet from source:
Code:
repo init -u https://github.com/Stuxnet-Kernel/stuxnet_manifest -b master && repo sync -j4 --no-clone-bundle
After syncing go to build folder and change the toolchain path on the scripts (stable for stable, etc.):
Code:
EXPORT CROSS_COMPILE="Point this to your existing toolchain"
After changing the path run the build command:
Code:
./mako-stable.sh
Finished product will be located inside mako/zip
For building CM kernel, do this commands after syncing the source:
Code:
cd mako && git branch cm-12 && git checkout cm-12 && git pull https://github.com/Stuxnet-Kernel/kernel_mako cm-12
Then while still on mako folder:
Code:
cd ../build && ./mako-cm.sh
Changelogs:
v1.0
Code:
- Initial Release
v2.0
Code:
- kexec patch
- voltage control
- halfbreed calibration
v3.0
Code:
- rework voltage control
- revert halfbreed calibration
- added governor tweaks
v4.0
Code:
- adjusted voltages
- enabled LZ4 compression
v4.1
Code:
- Linux 3.4.105
v4.2
Code:
- Entropy tweaks
- Check [B][URL="https://github.com/emceethemouth/kernel_mako/commits/Stuxnet"]GIT[/URL][/B] for full changelog
v4.3
Code:
- Lower down min frequency to 192Mhz
- Added CM12 support
v4.4
Code:
- Latest Google lollipop changes
v4.5
Code:
- Removed 192Mhz (seems I need to further check this one)
- added fsync control
v5.0
Code:
- reworked optimizations
- latest SM 4.9.3 built straight from SaberMod repo
- BFQ v7r7 latest
[/HIDE]
If I still had my N4 I know what I'd be flashing. Keep up the hard work @Gnome if this kernel is anything like your Arkenstone kernel it will be stable and very smooth. Enjoy guys/gals. :good:
Thanks for this new kernel, I flashed it and everything works smoothly ( 26126 in Antutu ), but I miss voltage control, will you add it in next builds ?
blusydays said:
Thanks for this new kernel, I flashed it and everything works smoothly ( 26126 in Antutu ), but I miss voltage control, will you add it in next builds ?
Click to expand...
Click to collapse
Voltage control is cool but some users really doesn't know how to use it, then if they screw up they go "blame it on the dev." Lol! Anyways I might release another version that has that just to be safe, soon if time permits.
Finally something for lollipop. Subscribed. Flashing.
are you using mpdesicion by qualcomm?
lalo20 said:
are you using mpdesicion by qualcomm?
Click to expand...
Click to collapse
Yes, no other hotplugs. Im not comfortable with others. Thats just me, but others are good too.
New kernels for Nexus 4 again haha..
praise 1 beer for you, @Gnome
Gnome said:
Yes, no other hotplugs. Im not comfortable with others. Thats just me, but others are good too.
Click to expand...
Click to collapse
great, qualcomm has the best hotplug, flashing now
Hey Francis! Does this have USB fast charge?
Edit : checked your git. It does!
Thanks!
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Any faux sound patches?
Also what's different with experimental kernel?
CallMeAldy said:
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Click to expand...
Click to collapse
Yes. I just flashed and it transformed
Horizone said:
Any faux sound patches?
Also what's different with experimental kernel?
Click to expand...
Click to collapse
It has voltage control and other stuff.
CallMeAldy said:
Hey, will this turn my Nexus 4 into a Nexus 6? :angel:
Thanks
Click to expand...
Click to collapse
Yes it'll make you sing this song.
http://www.youtube.com/watch?v=mhujM7T1_fQ
I am assuming we use ukm to tweak the kernel? BTW great work! Great to see an awesome dev make another kernel!
v2.0 is up changelog's on 2nd post.
@oxxshadow you can use and kernel daemon you like, I personally use trickster, but any will do.
Hello! First of all, nice kernel! It works Smooth!!!
But I have 2 questions. How I can change the colors? I don't like this kernel colors, I prefer stock. And... How I can activate the doubletap_to_wake?
Thanks a lot!
Asce92 said:
Hello! First of all, nice kernel! It works Smooth!!!
But I have 2 questions. How I can change the colors? I don't like this kernel colors, I prefer stock. And... How I can activate the doubletap_to_wake?
Thanks a lot!
Click to expand...
Click to collapse
trickstermod...faux kernel control
u can do both
For People who likes experimental builds, a new build is up. Changes just check it out HERE.
DOWNLOAD
Related
Why choose for CarbonRom?
CarbonRom is an AOSP based rom, which is always compiled with the latest linaro toolchain. The kernel also is compiled with -O3 optimizations for better performance. It also gives you a great option of customization. Reasons to go for CarbonRom are:
- Compiled with Linaro, this will make your phone ultrafast and ultrasmooth
- AOSP based, s no bloatware or other stuff
- Great Customization options
- Nice look
- HALO
- ...
Current Version
CarbonRom 2.0 is still in early stages, it's Android 4.3, but not all features are implemented!
I won't manually search for all new features, just wait for an official 2.0 changelog when it is completed.
- Android 4.3
- HALO
- DSP Manager
- New battery icons
- stability and speed enhancements
- a million other little things as well - we basically don't even sleep anymore.
What is CarbonRom?
CarbonRom is an aftermarket firmware based on the Android Open Source Project. We are dedicated to fast, stable, and feature-filled roms, honesty and communication with our users, and openness with our code. We like frequent builds, with the very latest and greatest hardware support and fixes. We strive to not only provide you with the best rom we can build, but also to give back to the Android community and our fellow developers. For us, this is about creating something we can be proud of and hope you will enjoy.
Please feel free to look at, build, and use our code on CarbonDev GitHub.
We would like to thank CyanogenMod for their device trees, framework/settings mods and their code that was incorporated into this project. We also extend our gratitude to the devs whose code that we have incorporated. Proper authorship has been maintained and can be viewed on our repository.
Special thanks also go to Slim Rom for some of their features, PA, AOKP, @FXP, and anyone else we may have borrowed commits from that hasn't been mentioned here. If you feel you have been unfairly left out, please - let us know.
While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in #teamcarbon on freenode IRC.
Screenshots
Download Carbon
All Carbon downloads and further information such as features, changelog, and FAQ can be found here in the second post of this thread and in the download tab.
I'll continue building nightlies as much as possible.
Support
1) Search. Search, search, search. Yes, you. I don't care how unique or important your question is, it's very likely someone has adressed it already. Especially if you're even close to new at this.
2) Read our FAQ, which can be found on our goo.im page linked above. It's new, but expanding fast. Just like us!
3) Ask a question here. Someone will no doubt try to help you. Warning: this help may come in the form of telling you it's a dumb question that has been asked before. See step 1 - such are the perils of asking questions when you haven't done the research yourself. Android is about helping yourself.
Who is the Carbon maintainer for your device?
For you guys, Xperia developer is me only, Krabappel2548. I'm the only one working for Xperia devices, maybe I'll add more devices to my support list soon. Any donations are highly appreciated, I'll always use them for my development, to buy new devices
Who are the Team Carbon members?
andros11
BigShotRob
dg4prez
Kejar31
mattmanwrx
morfic
nocoast
pixeldotz
slick_rick
winner00
Thanks to your help we now have the machines we need for nightlies. We couldn't have done it without you! Remember, every penny you send to us goes right back into the rom. It's used for hardware, server costs, etc - all the things that help us make Carbon better with every release. Your support means the world to us! If you've enjoyed Carbon, please consider a donation toward this goal. Thank you, and we hope you continue to enjoy Carbon!
XDA:DevDB Information
[ROM][AOSP][UNOFFICIAL]CarbonRom 2.0 bèta[4.3][togari][Oct 31], a ROM for the Sony Xperia Z Ultra
Contributors
krabappel2548
ROM OS Version: 4.3.x Jellybean
ROM Kernel: Linux 3.4.x
ROM Firmware Required: unlocked bootloader
Version Information
Status: Beta
Beta Release Date: 2013-10-06
Created 2013-10-06
Last Updated 2013-10-31
Reserved
Downloads Android 4.3
Rom: CarbonRom Android 4.3 Bèta download
Gapps: Android 4.3 gapps
Installation instructions
Clean install
- Wipe data, cache dalvik cache
- Install CarbonRom
- Install gapps!
- Reboot device & enjoy!
Update:
- Wipe cache, dalvik cache
- Install CarbonRom
- Reflash gapps
- Reboot device & enjoy!
Working
- Everything that's not in the "bugs list"
BUGS?
- Let me know
To Do List
- Readd all tweaks in the kernel
- Compile with linaro and -O3
- Maybe even more CPU Governors
- Maybe even more I/O Schedulars
- tell me!
Xperia Z1 changelog
The newer changelog can be found here: Carbon Rom
Code:
[QUOTE][B]== 24/10 Nightly ==[/B]
Updated the kernel:
- Minor stability improvements
- Latest CM changed
Updated the rom:
- PIE
- A lot of small updates
- Latest Carbon changes[/QUOTE]
[B]== 06/10 Nightly ==[/B]
Updated the kernel:
- Update to Sony 15.1.G.1.534 sources
- Added MPdecision
- Added BFQ I/O schedular
- Added Badass and Lionheart CPU governors
- Adder GPU OC possibilities to 600MHz
- Booting up at 2.1GHz (stock speed)
- Add OC upto 2,342 GHz
- Added some more CPU frequencies in between to sav battery: Test!
- Initial ZUltra release
- Latest CM changed
Updated the rom:
- Initial ZUltra release
- Latest Carbon changes
[B]== 03/10 Nightly ==[/B]
Updated the kernel:
- Fixes for various stuff
- Added VDD
- Added Sound control
- Adder GPU OC and enabled it
- Add OC possibilities
- Add some more optimizations
- Latest CM changed
Updated the rom:
-[B][COLOR="Blue"] Camera is now working[/COLOR][/B]
- Working Audio and video
- A lot of improvements and fixes for Z1
- Latest Carbon changes
[B]== 27/09 Nightly ==[/B]
Updated the kernel:
- Initial Z1 release
Updated the rom:
- Initial Z1 release
== Kernel FAQ - GPU OC - Voltage Control - Sound Control==
GPU OC
OVERCLOCKING GPU WILL REDUCE BATTERY LIFE!
you can overclock/underclock GPU manually via scripts/commands...
[ how to do this manually/script ]
To check current max clock of GPU clock use:
Code:
cat /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/max_gpuclk
To set GPU to particular frequency (overclock or underclock) use:
Code:
echo 533333000 > /sys/devices/fdb00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/max_gpuclk
available scaling frequencies are:
Code:
[LIST]
[*]600000000 - 600 MHz
[*]533333000 - 533 MHz
[*]450000000 - 450 MHz (DEFAULT)
[*]320000000 - 320 MHz
[*]200000000 - 200 MHz
[/LIST]
Voltage Control
All credits for this interface go to Faux123!
WARNING!
DO NOT USE TOO HIGH OR TOO LOW VOLTAGES, SLOWLY increase the voltage one notch at a time for a particular frequency and do stability/testing for few hours. once you have verified that you CPU chip can handle that voltage ONLY then "Set at boot"/Use init.d script
You can either use an APP (like IncrediControl) [others mentioned in OP] or use an init.d script to do the work...
to see current voltage table use:
Code:
[B]cat /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
to set voltage for a particular frequency:
Code:
[B]echo 1512000 1150000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
will set 1512Mhz freq voltage at 1150mV
to reduce voltages for ALL frequencies:
Code:
[B]echo -25000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
to increase voltages for ALL frequencies:
Code:
[B]echo +25000 > /sys/devices/system/cpu/cpufreq/vdd_table/vdd_levels[/B]
Sound Control
Kernel level Sound Control
This feature has been added by faux123 himself!
The sources for this feature are covered under GPL and are released along with my kernel sources at my GITHUB repo.
[ WARNING ]
high volume can damage hearing!
Krabappel2548, DooMLoRD or faux123 are not to be held responsible if this damages ur headphones/speakers/etc
USE THIS AT YOUR OWN RISK!
There are two ways to use this interface.
manual control through sysfs interface
paid app (FauxSound Audio/Sound Control)
How to use the app FauxSound Audio/Sound Control is pretty self explanatory so I will write on how to control using the sysfs interface...
BEFORE DOING ANY ADJUSTMENTS EXIT THE APPS LIKE MUSIC PLAYER/etc!!
The interface to control the sound output is located at:
Code:
[B]/sys/kernel/sound_control_3[/B]
it has 4 control interfaces:
Camera MIC
Code:
/sys/kernel/sound_control_3/gpl_cam_mic_gain
Headphone
Code:
/sys/kernel/sound_control_3/gpl_headphone_gain
MIC
Code:
/sys/kernel/sound_control_3/gpl_mic_gain
Internal Speaker
Code:
/sys/kernel/sound_control_3/gpl_speaker_gain
each supports gain levels from 20 (-20) to 50 (+10), base is 40 (0)
(the number in the brackets correspond to the numbers displayed in the app)
say if u want to boost headphone output (both left and right channels) then use the following command:
Code:
echo "44 44" > /sys/kernel/sound_control_3/gpl_headphone_gain
u can also individually increase/decrease the gain for each right and left channel
similarly other interfaces can be controlled
TIP:
do not jump to maximum values as sometimes the headphones/speakers might start distorting the audio... slowly increase and do testing for the levels which suit you!
not all accessories will work well with boosted audio output
All of this wouldn't be possible without @Kali- and @Bin4ry helping with stuff and setting up device tree etc
Also big thx to @DooMLoRD for some of his kernel commits to tweak the CM kernel
Download links added, here is proof it runs:
http://www.imagebam.com/image/042c8f280445739
Oh yeah! Thanks a lot Krabappel!
I was worried that you left us
LordManhattan said:
Oh yeah! Thanks a lot Krabappel!
Click to expand...
Click to collapse
avetny said:
I was worried that you left us
Click to expand...
Click to collapse
No
it's till uploading for those wondering where the link is
It has some tweaks in kernel
Omg my friend Morfic is in your team ! noway
avetny said:
Omg my friend Morfic is in your team ! noway
Click to expand...
Click to collapse
He's a carbon dev, I'm only maintainer for Xperia
Anyway download link added
Waiting tonight
Thanks for share
big said:
Waiting tonight
Thanks for share
Click to expand...
Click to collapse
It's already released and download link is added
Sent from my Xperia Z1 using xda app-developers app
So the camera doesn't work? Or was that just for the z1 version?
Sent from my GT-N7100 using Tapatalk 4
krabappel2548 said:
It's already released and download link is added
Sent from my Xperia Z1 using xda app-developers app
Click to expand...
Click to collapse
downloading now. Will complete a video review of the ROM for the OP if you want. Can't wait to test this lil puppy out! :silly:
Reb0rn said:
So the camera doesn't work? Or was that just for the z1 version?
Sent from my GT-N7100 using Tapatalk 4
Click to expand...
Click to collapse
Only Z1, on Z Ultra no issues I think it's same as CM
Sent from my Xperia Z1 using xda app-developers app
God damn i want my ultra now... I'm getting it on Friday. Nice too see that there's some familiar faces around here and a nice ROM collection this far.
Sent from my GT-N7100 using Tapatalk 4
krabappel2548 said:
Only Z1, on Z Ultra no issues I think it's same as CM
Sent from my Xperia Z1 using xda app-developers app
Click to expand...
Click to collapse
Carbon settings/ lock screen/ targets - holding the lock icon makes carbon settings not respond
Also wifi and mobile icons not displayed on reboot. Shows 2 bars sometimes... (i think you know that bug though)
So far everything else is working.. camera is stock CM10.2 so thats always gonna be better than Sony.
Dark Carbon theme will save battery a little.. and looks better..
Over all a good experience...
How to enable PIE control? i cant find it in carbon setting
nice another new rom ! will flash and test it out tomorrow - have run the carbon rom on other devices and really liked the rom - is they overclocking and undervolting with this kernel ?
hamdogg said:
Carbon settings/ lock screen/ targets - holding the lock icon makes carbon settings not respond
Also wifi and mobile icons not displayed on reboot. Shows 2 bars sometimes... (i think you know that bug though)
So far everything else is working.. camera is stock CM10.2 so thats always gonna be better than Sony.
Dark Carbon theme will save battery a little.. and looks better..
Over all a good experience...
Click to expand...
Click to collapse
How can Dark Carbon theme save battery?
GOF007 said:
How can Dark Carbon theme save battery?
Click to expand...
Click to collapse
its black Vs grey. Grey uses more while backlight, so will use more display, hence more battery. Not much, probably 3-4% each day..
Hello community,
for some time I have been trying to make perfomance friendly kernel and ROM. I obviously haven't missed JustArchi's discovery - O3 compiling flags. Although I was first sceptic, after some days of testing (and feedbacks from brave testers) I found out this is truly masterpiece. After adding some kernel tweaks, here is result - OptKernel. Read more...
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your mom shouting at you, because of you not being
* able to wipe browser history. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
- Based on LX rebase branch, brings kernel to upstream (3.4.103) and includes various fixes.
- compiled with Linaro 4.7.4
- both ROM and kernel compiled with JustArchi's optimizations (*)
- overclocked up to 1.6 GHz, underclocked down to 24 MHz
- added Dynamic FSync by faux123
- 1024 KB read-ahead
- Dynamic dirty-page writeback by Christopher83
- Fast charge available (disabled by default)
- added FRandom module
- enabled Zsmalloc
- added governors (list in changelog)
- ability to undervolt separate frequencies via VDD interface
- lowered swappiness
- Optimized read/write semaphore
- Used glibc version of memcpy/memmove (much faster than original one)
- power_efficient workqueues
And of course all features of LegacyXperia as in 20141224 sources
BUGS:
Proximity sensor doesn't work most of the time
Click to expand...
Click to collapse
(*) except for /hardware/qcom/display-caf/libhwcomposer, because of compile errors.
Almost all features are detaily explained in Christopher83's thread (hit thanks to him)
NOTE:
- It is not mandatory to use OptKernel only with this ROM.
The only feature of the ROM are -O3 flags and 4.8 toolchain. All other features are implemented in the kernel.
You can use OptKernel with LX's 1224 build, just flash wifi modules (2rd post). Still, this ROM is really fast, worth a try
- Don't report issues on LX bugtracker if you do so.
- Don't ask for ETA!
I don't know when (if) I'll release! I won't respond, even worse, I'll report you!
- I am not a developer. Everything I've done was only about searching and cherry-picking general improvements.
>>DOWNLOAD<<
SOURCE:
https://github.com/Vynikal/android_kernel_semc_msm7x30
CREDITS:
mikeioannina for base ROM
@Dark Raven for more-RAM idea
Christopher83 for many ideas and a load of patches
JustArchi for great optimizations
@mdfzhi for inspiration
Everybody for cherry-picks
+ all brave testers
FAQ:
Will you build it for <device>?
I have slow pc, so I can't make it for too many devices. You are free to build by yourself.
Why is ROM/kernel so big?
Because -O3 flags are taking additional hunks of data. More info at Archi's thread. Don't worry, it will install fine.
Can I use your ROM as a base?
Yeah, you're clear. Just add me to credits.
Will you add <governor/io_sched>?
I personally don't like too many governors, but if you want any, post it here.
Why aren't all those tweaks already in LX CM11?
Because they are experimental and maybe unstable. Mike wants to make stable builds for all.
My wifi is not working!
Flash modules (in Drive folder)
How can I help you?
1. Every problem you face report with logs.
2. If you have enough knowledge, help with improving code on Github.
3. If you want to donate, donate to Mike instead. Without him, this kernel wouldn't exist.
CHANGELOG
Code:
20141227
- read-ahead set to 1024 KB
- Kernel compiled with Linaro 4.7.4
- Whole ROM "crushed" with pngcrucher - size decreased by (much needed) 20 MB
- Features of LX 20141224
20140906
- free RAM is now at LX level (to see if bugs will disappear)
- in ROM, some perfomance flags enabled
- also in ROM, disabled low_RAM prop
- updated kernel to .103
20140807
- Completely rebased on LX [URL="https://github.com/LegacyXperia/android_kernel_semc_msm7x30/commits/rebase"]rebase branch[/URL], this includes:
- Kernel fully updated to upstream to 3.4.96
- Various fixes
- (By me) More patched to upstream (now .101) and updated all features from LX branch.
- Add some toolchain improvements and compiled with newest SaberMod 4.9
- Fast charge support
- Fix camcorder preview lag (RAM decreased by some MB)
- More undervolt
20140719
- Underclock down to 24 MHz
- Undervolt many frequencies
- VDD interface (allows manually change voltage of separate frequencies)
- Lowered swappiness
- New CPU governors - InteractiveX, OndemandX, Lionheart, Lulzactive, Hyper, Brazilianwax, Intellidemand
- Bumped RAM to 433 MB (lowered SF_SIZE)
- Optimized read/write semaphore
- Used glibc version of memcpy/memmove (much faster than original one)
- power_efficient workqueues
many other things, check [URL="https://github.com/Vynikal/android_kernel_semc_msm7x30/commits/OptKernel"]here[/URL]
all features of LX kernel 0718
20140703
- Initial release
HOW TO BUILD
1. follow this guide up to "repo sync" (don't execute it)
2. Open /.repo/local_manifests/semc.xml (hidden, press Ctrl+H)
Find this line
<project name="LegacyXperia/android_kernel_semc_msm7x30" path="kernel/semc/msm7x30"/>
Click to expand...
Click to collapse
and change it to this
<project name="Vynikal/android_kernel_semc_msm7x30" path="kernel/semc/msm7x30" revision="OptKernel-rebase"/>
Click to expand...
Click to collapse
3. Now sync repositories (depends on your internet connection)
Code:
repo sync
4. Run this
Code:
curl https://raw.githubusercontent.com/LegacyXperia/local_manifests/cm-11.0/updates.sh > ~/android/system/updates.sh
chmod a+x updates.sh
./updates.sh
And this
Code:
cd ~/android/system/vendor/cm
./get-prebuilts
5a. Download source.zip, unpack it to the root of your source and overwrite all.
5b. Run this, to give correct permissions to pngcrusher
Code:
chmod a+x build/tools/releasetools/pngcrusher
6a. Download SaberMod 4.8 toolchain and unpack them to /prebuilts/gcc/linux-x86/arm/
http://d-h.st/qsd
6b. For kernel toolchain, use a Linaro 4.7 toolchain (I use Christopher83's). Then put it to the folder above and rename to "arm-eabi-4.8"
7a. Build ROM (takes long time)
Code:
. build/envsetup.sh
breakfast <your_device>
brunch <your_device>
7b. To build only kernel (much shorter)
Code:
. build/envsetup.sh
breakfast <your_device>
make -j4 bootimage
8. Zip/kernel is in /out/target/product/<your_device> ready to install
If you found this guide wrong, got error or anything, write it down this thread.
Vynikal said:
For the glory of satan, of course
Click to expand...
Click to collapse
Before somebody else says this, let me have the honor
How about for other MDPI devices too?
rahimali said:
Before somebody else says this, let me have the honor
How about for other MDPI devices too?
Click to expand...
Click to collapse
In FAQ
Vynikal said:
... If you want to build for your device by yourself, I can make a detailed guide. :good: ...
Click to expand...
Click to collapse
A detailed guide would be nice...
Thanks. I will try.
Screenshoot pls.
So atlast finally you have released it
Bt does it have everything which is present in 0703 build....????
Cz 0703 build itself is very smooth... and with this...it would just fly
Sent from my WT19i using XDA Premium 4 mobile app
Awesome!!
431 MB RAM..impressivee..if there were something..like overclocking the RAM like overclocking CPU...these devs would possibly make 512 MB RAM incresint to 1 GB RAM haha... :silly:
Great rom by the way..blazing fast..but 1 problem,,,i always get bootloop whenever i try to switch to ART on clean install without any apps installed on internal...any possible solution for this?? just wanna try it with INT2EXT
1 problem with camera..whenever i take pic at night there is flash but..the final image is totally black with your rom..and whenever i stop recording the video camera force closes!
this bug wasn't on mikes 20140703 build!!..so fix this dude..
Just want to know what other things change in Rom itself other than kernel and archis optimization..
Any new script or mod
Because want to try kernel but just confused with flashed whole Build OR just kernel with july 3 CM11 build
(*) except for /hardware/qcom/display-caf/libhwcomposer, because of compile errors.
u post this
But it is really matter?
any issue because of this miss?
Downloading Now give u report back.
Thanks for awesome share Dev.
---------- Post added at 11:23 AM ---------- Previous post was at 10:49 AM ----------
One issue got after fresh install that
In Camera at the time video recording preview not shown its only stopped screen not showing anything but after recording complete the Output result gives nice video like CM11 only
What the wrong with preview Dev
I think its because of kernel
And also first boot RAM free is less than CM11
as i got 190MB in CM11 and here only 130MB
Posted both screen for RAM
Sent from my WT19i using XDA Premium 4 mobile app
After ROM stable RAM also stable screen attached
Good to see that..
No issue with RAM management.
Sent from my WT19i using XDA Premium 4 mobile app
Allow others to build and share them
@Vynikal you say you won't make builds for more devices. But will you allow to others to compile roms and kernels with your changes and share them here? So that if someone would compile for mango. Then he would upload it and PM the link to you. Then you'd add the link to the OP. If this could be done, many-many users would be happy:victory:
EDIT: I see that you are Czech, sme susedia
Can someone please compile Mini Pro (Mango) kernel?
Mine only issue is new Theme manager not set the themes correctly basically the CM11 theme only
Need to restart device for correctly set BUT after second OR third reboot it again set to default:crying:
What the exact cause
Before that NO issues occurs with themes
Only working theme correctly till now is Atomic Green+ which is Basically CM10.2 theme with CM11 addons
HELP ME
As I said, all features are clearly performance stuff, small bugs are risk, but expected.
I don't know about themes, I only use Xperia Z2 theme, works fine for me.
About libhwcomposer - it is not important, just a note for devs that there is a bit, which needed old -Os flag.
About camcorder FC. I will look at it, but not much chance.
I have compiled for smultron, will upload today. Also for mango, but only kernel.
Sent from my WT19i using XDA Free mobile app
Smultron and mango added, have fun.
(mango only kernel)
Tried to download smultron build 2 times and both times got an error after 40/50MB of download.
EDIT: Tried it for the 3rd time but still no luck. I was able to download the kernel.
Grof87 said:
Tried to download smultron build 2 times and both times got an error after 40/50MB of download.
Click to expand...
Click to collapse
Sorry, problem is on your side.
Sooplus Kernel for Nexus 5
Changelog & FeaturesRebased on kernel_msm lollipop mr1 kernel sourcebricked_hotplugmsm_sleeper hotplugqcom mpdecision hotplugBattery life extendersweep2wake and doubletap2wakeoption to disable wake functions with timeout or power buttonUSB fastchargeFull f2fs support (latest upstream updates) fstab option in Aroma installerNTFS R/W & exFAT supportMultirom Supportcolor and gamma supportfaux sound supportwake gestures supportVoltage controlAroma installer (All options can select in Aroma)
Kernel is for AOSP, CM12 & stock based Roms
Downloads
Sooplus Folder
Old Downloads
Sooplus 1.0.1md5: baa76249131fa0609a36f44db1c417faSooplus 1.0.2md5: 1849475166d1e972382ea9ae798fa510Sooplus 3.4.0md5: 88b5b96048fe07d3edf22492f7df1289Sooplus 3.4.1md5: a5ac1cb2c14b152e1deaae3e58d8af22
Suggestions and feedback always welcome...I cherry-pick from all the devs in XDA, Thanks to all XDA DevsSpecial thanks to @showp1984, @flar2, @franciscofranco, @faux123, @Cl3Kener, @neobuddy89
Kernel Source
General DisclaimerI'm not responsible if you brick your device.
You flash this Kernel at your own risk.
XDA:DevDB Information
Sooplus Kernel for Nexus 5, Kernel for the Google Nexus 5
Contributors
soorajj
Source Code: https://github.com/soorajj
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 03.18
Stable Release Date: 2015-03-18
Created 2014-11-18
Last Updated 2015-03-19
New Toy xD always good
Downloaded.... flash and test now ?
keep calm and have a Nexus
First test.... kernel runs great [emoji106]
But sweep2sleep doesn't work for me.
Tested all combinations but no luck.
sweep2wake gesture swipe up set in aroma but have swipe left to right to wake screen
keep calm and have a Nexus
1haumann1 said:
First test.... kernel runs great [emoji106]
But sweep2sleep doesn't work for me.
Tested all combinations but no luck.
sweep2wake gesture swipe up set in aroma but have swipe left to right to wake screen
keep calm and have a Nexus
Click to expand...
Click to collapse
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
MidnightDevil said:
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
Click to expand...
Click to collapse
Screenshots show settings in trickster [emoji6]
keep calm and have a Nexus
Sooplus version 1.0.1:
Sooplus version 1.0.1 is released.
Changelog: Github commits
So far so good, nice solid start.
Thank you
Sooplus version 1.0.2:
Sooplus version 1.0.2 is released.
Changelog
Sooplus version 1.0.3 is released.
Sooplus version 1.0.3 is released.
Compiled with Sabermod 4.9.3 toolchain: with Graphite opt enabled.
Changelog
soorajj said:
Sooplus version 1.0.3 is released.
Compiled with Sabermod 4.9.3 toolchain: with Graphite opt enabled.
Changelog
Click to expand...
Click to collapse
Thanks, gonna take it for a spin
Sorry for stupid question, but what is sbermod graphite mod?
also, your and elemextalX kernel don't work on my phone, dfq...
at elementalx you need to flash the stock kernel before. for me it works with dirty flashes too but who knows
iplexus4 said:
Sorry for stupid question, but what is sbermod graphite mod?
also, your and elemextalX kernel don't work on my phone, dfq...
Click to expand...
Click to collapse
In simply words - sabermod and graphite are optimizations for Android, making kernel and ROMs faster.
Can I add my own color profile to Aroma installer? https://drive.google.com/open?id=0B87i-uIvsOzONGk2aUp6dExpZlE&authuser=0
I'm feeling interested to test this kernel. Let's see if it can beat the 4672 PCMark score from Hellscore!
Bionic patches would be a nice feature to your kernel (take a look at xTraSmooth) =D
Deleted
otavioricciotti said:
Can I add my own color profile to Aroma installer? https://drive.google.com/open?id=0B87i-uIvsOzONGk2aUp6dExpZlE&authuser=0
I'm feeling interested to test this kernel. Let's see if it can beat the 4672 PCMark score from Hellscore!
Bionic patches would be a nice feature to your kernel (take a look at xTraSmooth) =D
Click to expand...
Click to collapse
ok i will try to add your color profile on next release
New kernel released
Changelog:
reworked based on cm source (I like cm source, why i don't know)
Build using GCC 4.8, no additional optimization flags! let's see how it will work!!
Added only my favourite features...
Detailed changelog
Last 24 hours with this kernel has been great (paired with latest Euphoria). Found my new DD combo ??
MidnightDevil said:
Have you tried using Trickster to set those gesture functions? Could you do it ? I'm also interested in a kernel with those functions. I'm using Racer with no problems there, but I wanted to give this a spin
Click to expand...
Click to collapse
you could use them with trickster...with premium version of trickster there is much more you could do to an existing rom
[64-bit][KERNEL][UBER-TC][15 Oct]Spirit.Kernel r3 [CAF]
Spirit Kernel
This kernel works on all the latest roms available which require new kernel source.
Statutory Warning: This kernel is not a feature bloated kernel like other kernels available, if you like tons of govs/io and hotplugs all in one and if you like to blow up your device, then you are at the wrong spot. This kernel will be minimal and only necessary features will be added.
A while back my users requested me to make a kernel which supports new ROMs(as few of them fail to). So I have decided to make a kernel which contains essential features along with stability and smoothness.
I will update this regularly as I have time and will add new features and fixes as well.
If you have any feature requests, don't hesitate to post it here!! I will consider if I like it
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of SpiritKernel you use (=rx, e.g.r3)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!
Features
This Hybrid kernel contains features from great kernel devs with like faux,franco etc, optimized for tomato to make it work.Initially there are less features but I will add much more soon
[*]Based on the Latest CyanogenMod sources
[*]CAF Patches by Abhinav
[*]Governors: stock for now
[*]Hotplug: ThunderPlug 2.5
[*]KCAL Driver by savoca
[*]Powersuspend by faux123
[*]FRandom module
[*]Adreno Idler by arter97
[*]Advanced TCP Congestion
[*]Built using UBER TC
[*]LMK Optimizations
[*]Graphite flags
[*]ANY Kernel zip
[*]And other opts
[*]TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD
TO-Do List
New Govs and I/Os
GPU OC and UC
* Recommended app for tweaking the kernel: FauxControl,Kernel Auditor or TricksterMod
How DO I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the Spirit.Kernel-rx-tomato.zip
Install and Reboot.
Changelog:
Click Me
Downloads:
Basketbuild
Source:
Github(branch:cm-12.1-amss-1.0.2)
Wiki containing changelogs,settings and more
Credits goes to these SUPERHUMAN for Inspiration and support (In no specific order)
Varun Chitre
Abhinav Jhanwar
arter97
faux123
yank55lu
savoca
cyanogen
And my supporters
And more
XDA:DevDB Information
Spirit.Kernel for YU Yureka, Kernel for the YU Yureka
Contributors
DC07
Source Code: https://github.com/DC07/spirit_msm8916
Kernel Special Features: CAF,KCAL,ThunderPlug,Adreno Idler and much more
Version Information
Status: Stable
Created 2015-10-10
Last Updated 2015-10-15
Does it support miui
DC07 said:
and if you like to blow up your device
Last Updated 2015-10-10
Click to expand...
Click to collapse
What do you mean ?
Does a bloated kernel 'blows up' device ?
baratheon16 said:
What do you mean ?
Does a bloated kernel 'blows up' device ?
Click to expand...
Click to collapse
adding unnecessary features and modifying codes without knowing anything does.
for eg. adding 4-5 hotplugs (enabled by default) and all working at once does.
Regards
Update is live.
Changelog
Dynamic FSync
ThunderCharge Control from Varun Chitre
Added Darkness governor
-OFast flags for more opt
Arch Power
vegas tcp tweak
Removed wlan.ko which was accidentally added
For more check github.
Enjoy.
Update is live
======r3=====
What's new?:
* F2FS and NTFS Support
* SWAP Support
* Enable all CPU cores while boot for quick boot
* kill some logspam
Changelog:
a47e11c spirit: use all cores on-boot for faster bootup
184bd1a moar changes
addc11d spirit: rework build script and bump to r3
9d5f29e spirit: add changelog.sh
52fcf5b spirit: Add NTFS Support
031757e Revert "dts : use all cores on-boot for faster bootup"
19b2c34 spirit: enable swap
701bcef mm: page_io.c: remove write error messages for swap devices
db6f10b mm/zswap: NUMA aware allocation for zswap_dstmem
122a852 mm/zswap.c: remove unnecessary parentheses
a37407a mm/zswap: support multiple swap devices
fa8792d mm/zswap.c: update zsmalloc in comment to zbud
58374d9 mm/zswap.c: fix trivial typo and arrange indentation
b1a1ec6 mm/zswap.c: change params from hidden to ro
2d81f29 mm/zswap: refactor the get/put routines
a664710 vnswap: integrate vnswap from Samsung
0a12121 mm/zswap: bugfix: memory leak when invalidate and reclaim occur concurrently
431421d mm/zswap: avoid unnecessary page scanning
4eeb42b mm/zswap: bugfix: memory leak when re-swapon
9a8de22 mm/zswap: use postorder iteration when destroying rbtree
65a7d5a mm/zswap.c: get swapper address_space by using macro
8af692f dts : use all cores on-boot for faster bootup
10b0414 spirit: updates to build.sh
699223a tomato: Enable f2fs
7986854 arm64: Kill logspam
Download: https://basketbuild.com/filedl/devs?dev=DC07&dl=DC07/Spirit/tomato/Spirit.Kernel-r3-20151015.zip
=====r3=====
Enjoy.
can we flash this on stock yureka rom! cm 12.1??
rishivg said:
can we flash this on stock yureka rom! cm 12.1??
Click to expand...
Click to collapse
It won't work on stock COS.
It works on AOSP and CM based roms
does it work for yureka plus?
does it work in blisspop rom
adamnp2000 said:
does it work in blisspop rom
Click to expand...
Click to collapse
Yea... It does... I am using it right now with blisspop
kdhupar0 said:
does it work for yureka plus?
Click to expand...
Click to collapse
yes, it does
Can you give us a daily usage setting for the kernel, please?
fanatic75 said:
Can you give us a daily usage setting for the kernel, please?
Click to expand...
Click to collapse
Check op
Work with cm13 ?
Any update @DC07?
Sent from my AO5510 using Tapatalk
This kernel is good but yureka plus is too damn slow on darkness governer.. Have to keep it on performance.. Any settings for a balanced usage without lags and good battery backup??
Thanks for the kernel.. ??
Does it supports MIUI 7?
Pls add 2.0ghz oc
DC07 said:
It won't work on stock COS.
It works on AOSP and CM based roms
Click to expand...
Click to collapse
So not compatible with Stock CM12.1 rom
Correct
CyanKernel for Nexus 5 (hammerhead)
-For CyanogenMod 13.0 Android 6.0.x ROMs (Stock, Omni, Carbon etc.) (don't install to another Android version.)
-Compiled with Uber 4.9.
-Compiled from latest CyanogenMod 13.0 sources.
-Added 3 extra governors. (i will add 10 governors later)
-Includes intelliactive governor. (i think the best governor)
-Some optimizations.
-Better performance and battery life.
-Undervolt.
-Default configurations for better ROM compatibility.
Installation:
-Download CyanKernel.zip from HERE
-Install it from TRWP or CWM
-Reboot
ENJOY
I won't overclock kernel because overclocking will reduce battery power and uptime.
I recommend Kernel Aduitor app on google play.
Changelog
v1.0.1
-Added some governors.
-Cleaned cpufreq driver.
-Added sio scheduler.
-Some optimizations.
v1.0.2
-Deleted smartmax governor. (it is causing bootloop)
-Added hyper governor.
-Added cpu boost driver to Kconfig.
-Some little changes i forgot.
Build Platform:
-Ubuntu 15.10 64 bit.
-Uber 4.9
XDA:DevDB Information
CyanKernel for Nexus 5, Kernel for the Google Nexus 5
Contributors
emre3461
Source Code: https://github.com/emreharbutoglu/CyanKernel-for-Nexus-5
Kernel Special Features: Compiled from CyanogenMod sources
Version Information
Status: Stable
Created 2016-02-05
Last Updated 2016-02-07
v1.0
emre3461 said:
v1.0
Click to expand...
Click to collapse
will test it
paully520 said:
will test it
Click to expand...
Click to collapse
I recommend intelliactive governor for better smoothness. Because no apps are running on background. I will add few governors on v1.0.1
Overclocking
I am thinking overclock for heavy gaming in next versions. Do you think overclock is necessary ?
emre3461 said:
I am thinking overclock for heavy gaming in next versions. Do you think overclock is necessary ?
Click to expand...
Click to collapse
I don't play any games, just for daily use
paully520 said:
I don't play any games, just for daily use
Click to expand...
Click to collapse
Okay, test with intelliactive governor. It will be fly lol
INFO
I am working on next version (v1.0.1). Which governors do you want on kernel ?
Update
Changelog
-Added some governors.
-Cleaned cpufreq driver.
-Added sio scheduler.
-Some optimizations.
Enjoy !
emre3461 said:
Chngelog
-Added some governors.
-Cleaned cpufreq driver.
-Added sio scheduler.
-Some optimizations.
Enjoy !
Click to expand...
Click to collapse
In test! i hope you add fast usb charge!
Eltorito94 said:
In test! i hope you add fast usb charge!
Click to expand...
Click to collapse
Yes i added fast charge in previous version.
Hi, is this only for cm13? OP says don't use on other android version...does it mean other than cm?
capt_f0r3st said:
Hi, is this only for cm13? OP says don't use on other android version...does it mean other than cm?
Click to expand...
Click to collapse
Yes this kernel for CyanogenMod 13.0 and derivatives (based cyanogenmod 13 roms etc.). I didn't test it on Stock ROM and Omni etc. but i guess if you install to antoher ROM (except CM) it will bootloop.
emre3461 said:
Yes this kernel for CyanogenMod 13.0 and derivatives (based cyanogenmod 13 roms etc.). I didn't test it on Stock ROM and Omni etc. but i guess if you install to antoher ROM (except CM) it will bootloop.
Click to expand...
Click to collapse
Just let you know, I flashed it on an (almost) pure AOSP rom (Krexus, to be exact) and it booted
fabio000 said:
Just let you know, I flashed it on an (almost) pure AOSP rom (Krexus, to be exact) and it booted
Click to expand...
Click to collapse
Okay, thank you for testing mate :good:
In the source code provides you haven't done anything
jawz101 said:
In the source code provides you haven't done anything
Click to expand...
Click to collapse
i haven't synced repo yet. (my connection is very slow)
EDIT: I commited check again
does this kernel have any hot-plugging ?? or is entirely disabled like in Franco kernel..!!?? Asking, because I don’t like hot-plugging.
Thanx..
BlazeForth said:
does this kernel have any hot-plugging ?? or is entirely disabled like in Franco kernel..!!?? Asking, because I don’t like hot-plugging.
Thanx..
Click to expand...
Click to collapse
i made a little mistake. :laugh: my brain crashed and i said "disabled instead of "enabled". i am writing java 4 hours. hot-plugging is enable.
jawz101 said:
In the source code provides you haven't done anything
Click to expand...
Click to collapse
i am moving kernel source to a new repo on github.
EDIT: check repo again. i commited changes.