CM11 for OnePlus One (Bacon) - Android Q&A, Help & Troubleshooting

Hello devs! I am trying to build my own personal custom ROM from scratch. I have followed a guide of CM11 wikipedia and did every bit of it (or I think I did). The ROM builds fine. I do get the flashable ZIP file. But when I flash it it doesnt flash like it should. I also dont get any error. And then it gets stuck at Cyogenmod logo. I looked all over the internet and I cannot find a solution. Doesn any1 knows what could be a problem?
I am flashing in TWRP. Could that be an issue? I normaly flash A LOT of ROMs and had 0 issues.

Related

[Q] Issues Flashing ROMs

Hey All,
Yesterday I started looking at flashing a custom ROM onto my Galaxy Mega (I9205) but I'm having real issues. I've tried multiple ROMs and recoveries and I run into errors every time. Hopefully I'm being a moron and have missed a step somewhere but I really don't think that's the case. I've trawled these forums to see if I can work out why this might be happening but with no luck.
The procedure I've used so far:
Use ODIN to flash custom recovery (tried both CWM and TWRP from http://forum.xda-developers.com/showthread.php?t=2369998)
Factory Reset, clear cache and dalvik cache.
Install ROM from recovery (I've tried PAC-man, CyanogenMod and LiquidSmooth.)
Errors have ranged from generic failures to "incorrect device" type messages and "Status 7".
A curious issue I ran into was with PAC-man. When I tried to flash the meliusltexx version, the install script detected my device as the melius3g. I can say categorically that my device is the I9205 NOT the I9200. I removed the assert section from the updater script and although the script now runs, it fails later in the process.
I've attached a log from the last attempt I made. This was using TWRP to flash pac_meliusltexx-nightly-20140306.
Thanks for any advice in advance.
I'm not the best at helping at problems, but I give it a try.
I noticed you used the TWRP from a pretty outdated thread.
Silesh.Nair has a few download links in his signature, which leads to the most updated recovery.
Also Philz Recovery (the one I use the most) has a separate thread.
Have you tried those recoveries too? Maybe you should flash them through odin first, and then install the roms.
Brilliant that did it. Used Philz recovery and ROMs are now installing correctly. Where do you find info on things such as the latest recoveries? I've been searching and the most up to date I came up with were the ones mentioned in the original post.
Thanks a lot for your help - glad it turned out to be something simple.
demented_goose said:
Brilliant that did it. Used Philz recovery and ROMs are now installing correctly. Where do you find info on things such as the latest recoveries? I've been searching and the most up to date I came up with were the ones mentioned in the original post.
Thanks a lot for your help - glad it turned out to be something simple.
Click to expand...
Click to collapse
We are here to help. Glad I helped! I had the same problem, and I found Philz recovery the original development (Philz Recovery Have fun with flashing, and don't forget:
We are here to help you

CM 14 won't Boot. Tried Flashing it multiple times!

1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Check the bootloader compatibilty of these roms, if they r for the mm bootloader it ll not boot untill u upgrade ur bootloader, check the threads from wer u hv downloaded this...
amritanshu.sikdar said:
1) cm-14.0-20160914-UNOFFICIAL-onyx.zip, 2) cm-14.0-20160917-UNOFFICIAL-onyx.zip
These are the 2 cm14 zips that I tried to flash multiple times (using twrp 3.0.2.0). The flash was successful everytime. But no matter how hard I try, it just won't boot. Just stays stuck on the OnePlus logo for eternity. I just recovered my phone from a soft-brick (no OS, no Recovery) and still continuously trying since days to use cm14.
Please, if anyone can then PLEASE HELP!
Click to expand...
Click to collapse
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Exodusche said:
Most Roms now require you too flash OOS 3.1.3 first. Like mentioned above bootloader issue.
Click to expand...
Click to collapse
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
check out this thread http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
amritanshu.sikdar said:
I already flash the OOS 3, but still this problem continues.
File name: OnePlusXOxygen_14_OTA_015_all_201608181615_e03d2112e8ad4bff
Is there any other way how I can manually upgrade my bootloader? That would really help.
Click to expand...
Click to collapse
I use Oxygen_14_OTA_18_all but there's a couple files posted on the bootloader upgrade threads that allow you not too flash the whole firmware just the partions you need to upgrade.
i am having same issue i was on oxygenos 3.1.3 firmware when i started to flash nogut roms every nogut rom works except cm. i flashed official cynogenmod 14.1 thinking that problem must have been solved but it wont boot it just shows oneplus logo. i have waited for 30 minutes but nothing happened if something worked out for you please tell me.
Well I've looked around XDA for soultion and this is it.
CM 14 has some Kernel problems, so only what you have to do is just install new kernel as Arsenic or Black Reactor kernel
I was running the new bootloader on cm13 nightlies and couldn't get it to boot either.
Even after a full wipe and reflash with v7 gapps
Gave up in the end and went back to the last cm13 Nightly
flash arsenic kernel after flashing rom and gapps it will boot. Read the posts in ashwin's official cm 14.1 thread.
Flash Black Reactor (recommended) or Arsenic Kernel.
The zip files that you have for CM are the unofficial ones. So I guess they're from Sarthak Narang. Or at least one of them. Those ROMs require the older bootloader to function. So if you have the newer bootloader, it won't work.

Uable to flash stock ROM

I accidentally wiped system and other partitions from my nx529j.
i was trying to flash stock rom but in stock recovery it says SD card not detected.
Even in TWRP i was unable to flash stock rom (Both 5.1.1 and 6.0.1). Custom ROM is installed but during calls neither me nor the other person can hear each others voice.
Internet is working fine.
Help.
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
The same problem
Pauliesss said:
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
Click to expand...
Click to collapse
I have similar problem. I have some Lineage 7.1 ROM and I want to flash back Stock ROM 6.0 beta, but I just try flash rom from official support page (.zip) and via TWRP and it show me ERROR I think, that maybe it isnt flashable file, but I dont know, how to change it to.
Please HELP US!!

Need Help (Flashing Rom)

Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
ShivamTiwari said:
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
Click to expand...
Click to collapse
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
rjrulz007 said:
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
Click to expand...
Click to collapse
Well in that case, I have no idea.Sorry bro,wait for someone else to reply.
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
try clean flashing.
download latest gapps first
in case u get bootloop, download this- unlock_bootloader.zip
clean dalvik+data+system+cache,
then flash firmware+rom+unlock_bootloader.zip+gapps
(i'm using twrp 3.1.0.0 official by TheStrix, never faced such problem. follow my method mentioned above)
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
Flash by formating (not wipe) in twrp
Try clean install. Wipe data and system after backing up.
If that doesn't work, Check if any software is making that issue. In my case, not exactly same, but was stuck on boot after flashing super su.
When i tried to flash twrp using flashify. It didn't work for me. My recovery not working anymore. Fastboot not detecting my phone. What to do now to flash recovery??
Try using BeansGapps

[JOYEUSE][MIATOLL] Bootloop after installing AOSP extend

Hello, I'm using OrangeFox, and when I flsh AOSP extend rom, i got a bootloop. However, i dont get any error during the installation of the rom.
If someone knows how to fix it, i'll take it.
Thanks.
Probably you used a ROM what's not suitable. Re-flash Stock ROM.

Categories

Resources