Hello, I'm using OrangeFox, and when I flsh AOSP extend rom, i got a bootloop. However, i dont get any error during the installation of the rom.
If someone knows how to fix it, i'll take it.
Thanks.
Probably you used a ROM what's not suitable. Re-flash Stock ROM.
Related
I have Cyanogedmod 7.1.0.1 from 2.3.4. I can install this and work 100% fine. But when I try to install other which this http://forum.xda-developers.com/showthread.php?t=1281489, that happens is that when I install and boot the rom, it stop in the S.E logo.
¿What i can do?
¿Is by the kernel?
¿Can anyone help me? Thanks.
Try and install the stock kernel again, that should fix your problem. The reason you are getting a bootloop is that the kernel for the CM7 mod is not made to work with the stock rom.
Hope that sorts it out for you
I have resolved it a long time ago.
Yeah, in fact it was the problem. I flashed 2.3.4 and now i can install other roms and restore my backup.
Hi, I am in need of help... I decided to give CM 10.1.3rc2 a try and after a day or so decided i wanted to go back. In order to flash CM 10 I had to use Flash GUI to flask the CM kernel. So when I decided to switch back to stock I again used Flash GUI to flash the kernel for the stock rom, and then flashed the rom, which appeared as part of the install process to again attempt to flash the kernel, and immediately went into boot loop. So I decided then to just try to restore my NAND backup. It appeared to restore fine, except I have no touchscreen functionality, so after it boots I can't do anything.
What went wrong here, and how do I fix it from here?
Truly appreciate any help I can get...
Thanks.
forgot to mention, I am S-on...
Click the link in my sig, and read the section about halfway down regarding the latest OTA update and the touch panel driver. You need to flash a 3.16 software version ROM, or a AOSP ROM with the newer 3.4 kernel.
Hello devs! I am trying to build my own personal custom ROM from scratch. I have followed a guide of CM11 wikipedia and did every bit of it (or I think I did). The ROM builds fine. I do get the flashable ZIP file. But when I flash it it doesnt flash like it should. I also dont get any error. And then it gets stuck at Cyogenmod logo. I looked all over the internet and I cannot find a solution. Doesn any1 knows what could be a problem?
I am flashing in TWRP. Could that be an issue? I normaly flash A LOT of ROMs and had 0 issues.
I accidentally wiped system and other partitions from my nx529j.
i was trying to flash stock rom but in stock recovery it says SD card not detected.
Even in TWRP i was unable to flash stock rom (Both 5.1.1 and 6.0.1). Custom ROM is installed but during calls neither me nor the other person can hear each others voice.
Internet is working fine.
Help.
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
The same problem
Pauliesss said:
I have the same problem. When I flashed RR or Mokee rom I was unable to hear call sound. I searched many forums but nothing helped. So i decided to flash stock rom bac, but it stuck on "Be yourself" or something like that. Now I am usim RR rom but without phone function which is very weird. Have anyone the same issue?
Click to expand...
Click to collapse
I have similar problem. I have some Lineage 7.1 ROM and I want to flash back Stock ROM 6.0 beta, but I just try flash rom from official support page (.zip) and via TWRP and it show me ERROR I think, that maybe it isnt flashable file, but I dont know, how to change it to.
Please HELP US!!
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
ShivamTiwari said:
Are u trying to flash the 7.1.2 based rom with 7.1.1 gapps.If yes then first flash the rom and boot, there will be no setup wizard this time and then flash the gapps
Click to expand...
Click to collapse
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
rjrulz007 said:
I tried without Gapps too but at a point when it ask install from backup or start as a new device it crashes no matter whichever option I choose. Any idea whats the reason. Thanks
Click to expand...
Click to collapse
Well in that case, I have no idea.Sorry bro,wait for someone else to reply.
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
try clean flashing.
download latest gapps first
in case u get bootloop, download this- unlock_bootloader.zip
clean dalvik+data+system+cache,
then flash firmware+rom+unlock_bootloader.zip+gapps
(i'm using twrp 3.1.0.0 official by TheStrix, never faced such problem. follow my method mentioned above)
rjrulz007 said:
Hi there. I'm using Redmi Note 3 SD from quite some time. I've officially unlocked the bootloader and flashed many custom as well as MIUI Roms from time to time. But recently I'm facing a problem. I'm trying some Nougat based Roms but facing a weird problem. After flashing Rom when the phone boots up and setup screen comes than while setting up the phone screen crashes in some certain point and it starts from the beginning, it won't past the setup screen. I tried many Roms like NOS, AEX, Lineage but facing the same problem. I've used Nougat based Rom previously but was not facing this issue, it only started when i tried to flashed newer build. Am I doing something wrong. Please I need urgent help so any help will be highly appreciated.
Click to expand...
Click to collapse
Flash by formating (not wipe) in twrp
Try clean install. Wipe data and system after backing up.
If that doesn't work, Check if any software is making that issue. In my case, not exactly same, but was stuck on boot after flashing super su.
When i tried to flash twrp using flashify. It didn't work for me. My recovery not working anymore. Fastboot not detecting my phone. What to do now to flash recovery??
Try using BeansGapps