Hi guys,
A couple days ago I installed CM10 with the installer and then CM11 over the air. However I have some problems with the ROM apart from the battery drain and heat, my phone sometimes just randomly freezes, turns itself off and when I turn it back on, the battery dropped at least 20%. My very first question would be, if anyone has a fix for this? I already tried wiping system cache, but it did not fix the issue.
I googled around to find some solution, and it seems that CM 10 is more stable and there are fewer issues with it. I would like to go back to this version, however I'm not entirely sure what should I do. My first step would be wiping everything and factory resetting the phone, as there might be stuff left from the previous ROMs on the phone. I reckon I have two options from this point:
1. Running the CM installer again and have it install CM 10. Is this even possible? Or the installer won't even start given that I have a fresher version of CM?
2. Downloading the latest official ROM from sammobile, flashing that with ODIN and then running the CM installer. If I have to do this method, is there anything that I should extremely be cautious about? Also, I bought the phone in Hungary, but now I'm in England, and I installed CM here. I reckon I'll have to download the Hungarian ROM from sammobile for my phone, could someone please confirm this? The phone is not locked to a carrier anymore (they removed it), can I just flash the general (XEH) Hungarian ROM?
Thank you very much for the help in advance, and sorry for the noob questions!
gravisone said:
Hi guys,
A couple days ago I installed CM10 with the installer and then CM11 over the air. However I have some problems with the ROM apart from the battery drain and heat, my phone sometimes just randomly freezes, turns itself off and when I turn it back on, the battery dropped at least 20%. My very first question would be, if anyone has a fix for this? I already tried wiping system cache, but it did not fix the issue.
I googled around to find some solution, and it seems that CM 10 is more stable and there are fewer issues with it. I would like to go back to this version, however I'm not entirely sure what should I do. My first step would be wiping everything and factory resetting the phone, as there might be stuff left from the previous ROMs on the phone. I reckon I have two options from this point:
1. Running the CM installer again and have it install CM 10. Is this even possible? Or the installer won't even start given that I have a fresher version of CM?
2. Downloading the latest official ROM from sammobile, flashing that with ODIN and then running the CM installer. If I have to do this method, is there anything that I should extremely be cautious about? Also, I bought the phone in Hungary, but now I'm in England, and I installed CM here. I reckon I'll have to download the Hungarian ROM from sammobile for my phone, could someone please confirm this? The phone is not locked to a carrier anymore (they removed it), can I just flash the general (XEH) Hungarian ROM?
Thank you very much for the help in advance, and sorry for the noob questions!
Click to expand...
Click to collapse
If you want to downgrade to CM10, just download the cm10.zip and flash it on recovery (remember to wipe /system and all user data first).
If you want the stock rom you can flash a stock rom from any country, althrough it's recommended to flash the rom for the country you are in now.
Also, the battery bug is a device specific bug and cannot be fixed, maybe wiping the battery stats can help.
Thank you! Do you have a Galaxy SII? If yes, do you think that it's worth going back to 10.2 or should I just stick with 11, regardless of the bug?
gravisone said:
Thank you! Do you have a Galaxy SII? If yes, do you think that it's worth going back to 10.2 or should I just stick with 11, regardless of the bug?
Click to expand...
Click to collapse
I'm using cm11 m12 snapshot latest over i9100 .. I dont find any battery bugs as you've explained above !! Battery life is pretty good actually gives me life of around 5-7 hours with wifi on always !! Try this
Related
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
richfreestone said:
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
Click to expand...
Click to collapse
I've installed a couple of the nightlies and not had major issues. There were indeed bugs, which made me move on to other ROMs (among other reasons, including the fact that my old HD2 had CM7 and it got a bit old).
As far as my experience goes, the nightlies have been quite stable. As mentioned, there were bugs here and there, and a force close from time to time. But I didn't have the problem you've mentioned with hanging at install.
They did take a while to load the first time, longer than I remember was the case on my HD2. Did you wait long enough? Delvic/cache cleared?
EDIT: I also found a CM9 around New Years, but it wasn't as stable and had charging issues. But I think it's out and the waiting's over, really.
EDIT AGAIN: The other option would be to try out the official ICS release, which can be found at samfirmware.com. That's my plan for the weekend.
like the previous...Sounds like your flashing over existing roms without wiping everything first...From recovery mode after backing up, the best way I find is to wipe data/clear cache and wipe dalvic cache from advanced menu before flashing any roms...that way your starting with a clean slate and will be less conflictions from old to new.
for me CM7.1 not stable
I'm waiting a stable CM9 its promising
If you follow the instructions on how to install it, it's stable for everyone. I'm using it for many many months now, and it's stable.
If you're coming from other ROM's, make sure you do a FULL wipe, and flash the rom TWICE in a row, without rebooting recovery.
And yes, we're waiting for CM9. CM7 is not supported anymore for SGSII.
I cleared the data, the cache, went into advanced and cleared the dalvik cache.
Installed the nightly, which I thought was trange was only 100mb, normally ROM's are like 300mb.
I'll try flashing the ROM twice as TheSaw has said. However, after seeing that CM7 isn't supported, I may think twice, i'm just getting bored of the stock.
Might also be worth noting, i'm using [email protected] #k2-18 kernel.
Also, by the way Sean is here, did you know you've got a USA flag in your mini profile under your username? will the official release be a odin flash? or can I just use a .zip through CWM to flash it? and would I still be able to use the speedmod kernel with ICS?
Always working for me and thousands of others .
Usual story is wrong install .
jje
I managed to get this working, by installing the ROM once, and then installing it again straight after.
I was just wondering, is there a way to move the lock screen lock down to the bottom of the screen, i.e. above the unlock and camera buttons? and is there a way to change the clock?
Hey guys,
here is what is going on with my German Vodafone I9100
After using Sensation Rom for a few months, I finally decided to make the transition to Android 4.
The first rom I tried, was the Simplistic ICS by LegendK95
Installing from CWM worked like a charm, booting worked like a charm, but whatever I tried to do, the phone freezed in homescreen randomly after 5-30 seconds. Only a restart bring it back to work, only to make it freeze again after the mentionend time span.
Whatever I did (waiting in home screen, pulling down the statusbar, scrolling in app drawer) the phone always freezes.
After dozen of restarts, I installed the rom again, the problem stayed.
Then I decided to go to stock 4.0.3 (LP6). Installation via Odin worked like a charm. Booting worked like a charm, but the homescreen-freeze-problem got even worse.
I also tried to reinstall the stock LP6, but the phone now even froze in CWM mode, while data reset AND WHILE INSTALLING THE FW.
Now I got a soft brick in my hands.
So, I installed stock 2.3.3. via Odin. The phone now worked flawless again. No freezes, no no nothing. Just a working phone.
My final try was to install the latest CM9 build.
Guess what happend?
The legendary homescreen freeze. That nobody else appear to have. YAY
So, somehow my phone seems to be allergic to Android 4.
Can somebody please help me?
Regards
PS: Yes, I followed the instructions every firmware provided.
Honestly you want an honest answer. Stay clear of ICS leaks and yes that means even cm9. Reason being. Because of what they are. Leaks and nothing official. Not saying that they are not good but if you look at the original android development can you see any actual ICS roms? No. Why you asking? Because no kernel sources have been released and nothing is far from stable yet. Even cm9 builds codeworkx has on the thread title experimental. So my advice. Flash a Gingerbread custom rom slap on it the ICS by vertumus and your good to go till the official stuff get released.
Maybe before flashing ICS you should fully wipe your device to get rid of all previous ROM data from Gingerbread as they,I imagine,wont be very compatable.
Boot to recovery and go to "mounts and storage" and format System/Data/cache and then factory reset.Then flash the Rom via recovery(install zip).If its an Odin flash then reboot and flash via Odin.
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Klammeraffe said:
Hi suarez,
thanx for your opinion. I read a lot of threads before updating and came to the conclusion that the current releases, even CM9 seem to be pretty stable.
Also I found no one having issues like that.
Hi cooza,
I did that.
Click to expand...
Click to collapse
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Suarez7 said:
No problem my friend. But I still stand by what I said though. For me to make the jump is a no go yet. Yes they might be stable but so far I still read problems regarding video forever, this is not working that does not work and that most issues will be solved once kernel source is available. Hence why still the experimental on cm9.thread.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Yes, but if you're not that big into watching/recording videos on your SGS2, it's pretty freaking stable.
Installing the latest experimental build of CM9 is probably the best thing I've done to my SGS2 as of late. It's just so... Nice.
I cannot get rid of that problem.
I really need help on this.
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Klammeraffe said:
Some new information:
I also tried to flash the leaked stock LP2. Same result.
This FW crashed on first start, when the Samsung Apps are installed.
Still some little success:
When flashing from stock BUGKJ2 straight to LegendK95's Simplistic ICS rom, I was able to get it to run, until I have to restart the phone.
But this was the only rom capable of doing so. Every other fw failed.
So, I now can have ICS on my phone but only until I restart the phone.
After reboot, the phone crashes again after some seconds.
Additionally the CWM Recovery doesnt work as long as I have a ICS rom on it.
It also occasionally crashes. Preferrably when I try to flash a new rom, leaving me a shiny brick
Here are the steps to get Simplistic ICS run until reboot:
1. Put the file on internal memory.
2. Go to recovery: wipe data/factoy reset, wipe cache, wipe dalvik, wipe battery, format system, format data, format cache
3. Flash from internal sd
4. Reboot
Click to expand...
Click to collapse
Maybe the problem is the stock firmware you first flash.I searched for it but cant find it,is it carrier branded?..BUG sounds like it to me.Maybe you should fully wipe your phone (format System/Cache/Data) and first flash something like XWKL1 and then the ICS ROM.If the ICS ROM you are going to flash has a multi CSC package in it then it wont matter what F/W you flash first.
hello cooza,
i had to go back to stock 2.3.3 because my phone was a brick after flashing any ics rom.
i tried to flash simplistic ics and cm9 via cwm, i dont know if those contain multi_csc.
however, the leaked stock roms, lp2 and lp6 both contain multi_csc that i flashed via odin.
here are all the steps i tried:
fail 1: flashing from sensation rom 3 (2.3.6) to simplistic ics
fail 2: flashing from 2.3.3 to cm9/simplistic ics
fail 3: flashing from bricked ics to stock lp6
fail 4: flashing from 2.3.3. to 2.3.5. (latest official release via kies) to cm9/simplistic ics/stock lp6
fail 5: flashing from 2.3.3 to leaked stock lp6 inluding the pit-file provided
nevertheless, flashing from 2.3.5 to simplistic ics worked until restarting the phone. however, cwm was not working correctly then. so, surely i could have tried to let the phone on for forever, but as soon as i would want to flash a new firmware, i would have got a brick left, because cwm would crash during installation of the new one.
there must be some help out there
thanx for trying cooza. much appreciated.
You might have a damaged bootloader.Although its not needed you could try a JTag.A JTag is used to bring a hard bricked phone back to life.You dont have a hard bricked phone but what it also does is repairs any damage that the bootloader may have.Costs about 25 to 30 euros.As a last resort you could give it a go if your phone is going to give you constant reboot problems and not let you flash firmwares.It should also repair any repartition faults because it completely wipes the bootloader before repairing it.The phone will come back like the first day you got it.check the link below out and use it to find one close to you if you choose to do one.I had an i9000 done last September here in Spain and it came back perfect from a hard brick soo I know it works.I used the link below.
http://www.jtagbox.com/riff-jtag-bo...-bricked-phone-riff-box-owners-list/#comments
Seems like the very last option to me
Would a broken bootloader allow me to run 2.3.X flawless?
Question does Samsung stock firmware work .
As it seems all your problems are from using a buggy unreleased test rom not from using Samsung released firmware .
I would if it was my problem .
Clean Slate for those that balls up the firmware .Or need to return to service or decide if its hardware/firmware problem .
Backup data first if phone is working .
Boot CWM recovery
Mounts and Storage
Format cache data system sd card wiping everything on the phone .
Remove battery
Boot to download mode
Open Odin
Install correct Samsung stock firmware for your phone model .
Test phone works .
jje
hi JJ,
thanks for your post.
as i said, the phone is working fine on stock android 2.3.X as well as custom firmwares using 2.3.X.
However, all 4.0.X firmwares I tested, showed the same behaviour: crashing my phone in homescreen (or anywhere else after booting) AND in cwm after 10 to 30 seconds.
only simplistic ics custom rom worked fine until first reboot. then it crashed as well. everytime.
I tested 2 stock firmwares of samsung and 2 custom roms.
I also tested flashing 4.0.3 (CM9) on a friends SGS2 using the same procedure I used on my phone. It worked on first try and he`s now a happy android 4 user.
right now i`m running on CM7 but i wanna uprage to android 4.
edit:
up to this date there is no official released 4.0.3 rom for the sgs2 but how can it be that I have the only phone showing such a behaviour while everyone else has a 99% stable fw for the same phone using the same rom?
Mate,at least it works,thats the important thing.I can understand that its frustrating when the only Firmware/customROM you want doesnt work in your phone and only your phone but we are talking about BETA version ROMs.If there is something for some reason blocking the ICS ROM then it is possible that the JTag will clear it up as it wipes and repears the bootloader as I mentioned so any corrupt data will dissappear.Ive had a bricked phone done and it still works perfectly today but never a phone in your situation.Its possible but never having done so I cant guarantee it.If you want give it a go.You got nothing to loose except 20 or 30 bucks for your efforts.
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
If you take the time and read the various ICS posts one inescapable fact will arise .
ICS suffers from many varied problems with no two users reporting identical problems .
That is compounded by two factors one the boot loader and two as a beta test rom for some strange reason those with very little knowledge rush to install it .
But hey save money on the Samsung testing department just leak your Alphas and Betas .
For me i will play with a test rom for an hour or two but thats it i require a stable rom for daily use . It will need vast improvement for me to consider the final release of ICS for daily use .
jje
spytrek said:
I have exactly the same issue with a "german" Galaxy S2. I tried to install the {CWM}İCS REMİX ROM v8.4 ULTİMATE ONLİNE XXLP6 4.0.3 resurrection NO-WİPE
Version.
Followed ofcourse the installation instructions letter for letter. It doesn't go over the logo screen. ( And yes I am aware it takes several minutes for such an installation to finish)
I read in that thread of at least another 3-4 people with the same issue.
Going back to any 2.3.x works as usual.
Click to expand...
Click to collapse
GSMArena say that Samsung are launching ICS for the S2 in march
http://www.gsmarena.com/samsung_galaxy_s_ii_and_galaxy_note_to_get_ics_in_march-news-3752.php
with this I imagine that stable ICS custom ROMs are just around the corner so if you can wait a few months more you will be able to flash a stable safe ROM without any problems.Until then the BETA versions that are out at the moment are going to cause these types of things.
I had these same isues with KP8 on my s2. I fixed them by flashing LP6 directly over kp8 without wiping anything. I think it may have something to do with the phone drivers you have installed on your pc. They may be damaged and be producing some kind of error on the flashing proccess. I recomend that you hard reset to 2.3.x and reinstall kies on your pc. That should reinstall phone drivers too. And make sure kies is NoT running while using odin. Kies doesent like odin
Sent from my GT-I9100 using Tapatalk
I have patience As long as I fallback to a functional rom everyting is cool. As for the alpha-beta testing, I have nothing against it and I didn't complain about it. Till March I hope the S3 is out so I can pass my S2 to my better half ...
I have a the same issue every time i flash new nightly build CM9 rom.
Every time I flash/update CM9 the battery charge so slow and overheat the SGS2 also thy battery drains so so fast.
it takes one or two days then it will become normal (i don't know how) but when i flash the new nightly build i have the same issue.. i don't know what is the matter.
I believe it's a common problem and already be solved
Please inform me if anyone know how to solve this.
thank you
Please don't double post word for word in two different threads. Be patient & wait for someone to answer you in the CM9 discussion thread.
Having said that, I'm not sure there is anything you can do about this. I remember this used to happen to me using Galnet Miui & early builds of GB Siyah. It would heat up (a lot: particularly when charging) for the first few days after a flash then settle.
You could always do a completely clean install of CM9 - either do a wipe/factory reset or go the whole hog & format cache, data, system, & sd card then do the noob-proof install by flashing Resurrection edition via Odin & see if that helps. Rather than restoring your apps/data, you could also do a clean install of these as well.
Or you could always live with the phone overheating a bit for two days after you flash a build ;-)
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
monolithcog said:
Hi Team,
I have a GT-19100T which had the carriers firmware (Vodafail AU) 4.1.3 (rooted) running with no problems until recently (2 wks ago), prior to the fault I have had this phone for years no glitches great phone for its age.
I had let the battery drain, upon re-energizing the phone and attempting to turn on the wireless i noticed it just reported "Turning WI-FI on" and the toggle switch was greyed out. this would last all day. switching the phone off and on would not stop the process of the phone attempting to turn wi-fi on.
I immediately went searching forums and people suggested hardware fault or perform factory wipe through CWM.
Troubleshooting I have performed so far is:
- factory wipe and cache cleanup (not resolved)
- flashed to CM 10.1.3 (not resolved) (multiple times)
++++
OS: 4.2.2
Baseband: 1900TDULP4
kernal version: 3.0.64-cm-g9c2e2bc
++++
I have found from research that the Bluetooth and wi-fi are the same module (I maybe wrong) and Bluetooth is working fine.
So this leads me to suspect a software/firmware fault.
I'm currently downloading I9100TDVLSM_I9100TVAULSF_VAU.zip from (sam mobile) the latest release for this phone from the carrier to see if firmware will resolve the problem.
In the mean time any suggestion, advice, help or solutions would be greatly appreciated.
Maybe if someone knows of a file i can flash specifically for wi-fi module that I could try.
Thanks in advance
Click to expand...
Click to collapse
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
huytrandinh said:
I have same problem few weeks ago when my galaxy on Stock Rom 4.1.2.
Later, I try to reflash again through Odin, then install CWM and I flash CM 10.2 4.3 through CWM and it solved.
I think you should try to flash Newer Rom version, example CM10.2 or SlimKat.
Good luck
Click to expand...
Click to collapse
Thanks mate for your reply,
I installed cm 11, this did not resolve it.
need the file for the radio/modem, i'm hoping this will fix it but not sure exactly what I am looking for.
**Update***
Just finished installing I9100TDVLSM_I9100TVAULSF_VAU (latest release from Sam Mobile) 4.1.2
Still wi-fi not working.
will try and install cm 10.2 on your recommendation huytrandinh
Okay latest nightly of CM is installed cm-10.2-20131216-NIGHTLY-i9100.
Still has not resolved the wi-fi issue.
anyone have a potential solution?
there is this post for S4, but obviously only viable for S4
http://forum.xda-developers.com/showthread.php?t=2192025
There is also this video tutorial which is for S4
http://www.youtube.com/watch?v=YL8H70Es4wg
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
jedzkiiii said:
Try to flash a modem using odin,
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Have been trying that, still no success.
have spent all day trying to find a solution
I tried the modems from here:
##hxxtp://###.veyka.co.uk/sgs2/radios/## (unable to post links ffs)
and few other random links from the forums
MistahBungle said:
Modem won't solve the issue as WiFi/BT drivers are in the kernel on the S2. OP was on the right track, but for whatever reason a clean install of stock didn't fix the problem.
Maybe try the 3 part firmware in Hopper8's Odin Troubleshooting thread, then a clean install of the Voda stock rom after that ?
There's 'WiFi fixes' (which are actually the LTE modem) for the I9505 as it actually has two separate modems, and the LTE modem also controls WiFi (which isn't the case with the S2 as per my comment above).
Click to expand...
Click to collapse
Thanks Mistahbungle,
I checked out that thread http://forum.xda-developers.com/showthread.php?t=2345831
Nothing i could really use.
But I did try a few other kernels:
Siyah-s2-v5.0.1
Unfortunately as soon as flashing with other kernels the screen would go black after the initial boot logo.
Only way to resolve it not booting into the OS was to roll back to:
1. GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9 (flashed with odin)
2. flash CWM-SuperSU-v0.97 with CWMRecovery
3. install cm-10.2-20131216-NIGHTLY-i9100
4. then your general cleaup through cwmrecovery
I'm not sure if I'm doing something wrong when trying to apply another kernel.
anyone able to offer assistance please with right kernel?
cheers
**Update**
Just found a post in that thread - http://forum.xda-developers.com/showthread.php?t=2345831&page=6
Will try the 3 part rom XXLSJ for GT-I9100.
Fingers crossed
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
MistahBungle said:
Yeah, that's what I suggested in my PP. Sorry, seems the 3 part was on HotFile & Hopper didn't have his own copy up somewhere.
The rationale was - there's possibly something from a previous installation causing your issues, and flashing the 3 part would wipe your phone. I realise you've done this manually, but at this stage you're fast running out of ideas before you declare it a possible hardware issue, and it was worth a shot.
So...What I'd try is - while you have a rooted phone, go into CWRecovery and format everything/ (not EFS though obviously, or your external card if you have one), then try re-flashing whatever stock firmware you have with Odin in download mode.
Edit - Also, maybe do a Google search for that 3 part firmware (details are still on Samfirmware, just that the files are gone), you never know, you might find it somewhere.
Click to expand...
Click to collapse
Okay just finished testing the rom by installing it via odin (3 part)
still has not yielded any favorable results .
Little disapointed as this was a great backup phone and served for the past 12 months as a mp3 player
Guess as they say; It is all planned obsolescent which is fracked ...
Thanks for the suggestion/help anyway.
I know this is an old thread but my gs2 had this problem and I was able to fix it. Using es file explorer made my way to /data/misc/wifi pulled up the properties to wpa_supplicant.conf and changed group to wifi...then wifi finished initializing...hope this helps somebody
Sent from my SM-T310 using XDA Premium 4 mobile app
for consideration.
I have this phone. the GT-i9100. Had this issue also. I took it apart. The little onboard battery had blown and corrosion got all over all it.
and guess where WiFi hard is. Right Next door. I cleaned it up real good. Put it back together and WiFi came back to life.
So give it some thought guys.
Hi,
Firstly thanks for time and sorry if this is a noob question but I only have a fairly small amount of experience regarding custom roms.
Here goes...
I have changed the rom on my phone about 5 times over the last couple of years and never had a problem. I have the latest version of teamwin and I'm currently running Android Revolution HD 50.0 by mike1986. This rom works great as have all the other I have used in the past ie Cyanogenmod, Omega etc but the problem I am having is over the last 4 months I am completely losing network and even if I try to search for a mobile operator my phone can't find any unless I run a full power cycle.
I have been reading as much online mainly xda-developers to find a solution to this problem but I'm afraid I'm now just running into a brick wall. I understand this could just be a hardware fault but I have read somewhere that I may have the wrong modem installed for my phone.
How likely is this? Can having the wrong modem cause intermittent problems? Also if this is the case where the I find a tutorial on correcting this issue. Plus which modem should I be using in the UK?
Again thanks for you time and any help would be much appreciated.
Mike
Do a full wipe and flash the latest stock firmware for your country, then factory reset.
Test fully before you install or restore anything. If it is still the same then probably hardware.
Sent from my GT-I9300 using Tapatalk
ok, Will do. I am just waiting for the UK stock firmware to download. I left it downloading while I was out this afternoon and for some reason it failed and now is asking me to wait an hour before retrying
I'll let you know if this solves my problem.
Thanks
ok..
I managed to get hold of the stock firmware from another site. I first installed a version of ICS so I could run triangle away properly after rooting with CF auto root as without doing this I couldn't reset my binary counter even after flashing stock recovery. Then I installed the latest version of JB and ran the official Samsung update to get my phone up to the very latest Official software with device status official.
So now my phone is completely back to if it just came out of the box. I finished late last night and installed nothing but WhatsApp. Then at about 3pm today again I completely lost network and couldn't restore in without a full power cycle. Even searching for Network operators in settings couldn't restore the connection. I can't think of anything else to try.
Any ideas what to try next please?
P.S. The firmware I installed is as far as I can tell for my location. I'm in the U.K. and I'm using the stock BTU version on baseband version I9300XXUGMK6
the same i9300 problem
Mike_aMPLe said:
ok..
I managed to get hold of the stock firmware from another site. I first installed a version of ICS so I could run triangle away properly after rooting with CF auto root as without doing this I couldn't reset my binary counter even after flashing stock recovery. Then I installed the latest version of JB and ran the official Samsung update to get my phone up to the very latest Official software with device status official.
So now my phone is completely back to if it just came out of the box. I finished late last night and installed nothing but WhatsApp. Then at about 3pm today again I completely lost network and couldn't restore in without a full power cycle. Even searching for Network operators in settings couldn't restore the connection. I can't think of anything else to try.
Any ideas what to try next please?
P.S. The firmware I installed is as far as I can tell for my location. I'm in the U.K. and I'm using the stock BTU version on baseband version I9300XXUGMK6
Click to expand...
Click to collapse
Hi I am have the same problem.. I've tried 2x reapir store.. but just can say: "you need put new main board".
But I have trust that its not better solution (at least for me).
So if you find some solution, please dont forget reply here.
Thanks
O2 by any chance? .. if so it's a network issue. It happened to me a while back but cleared up after a day or two.
shivadow said:
O2 by any chance? .. if so it's a network issue. It happened to me a while back but cleared up after a day or two.
Click to expand...
Click to collapse
This is exactly the issue I have now - I can get some signal, but can't get anything in terms of using 3G/Mobile data :/