[Q] After install RUU stuck at white screen with logo please HELP - HTC EVO 3D

So,,my evo 3d is stucked at white screen after rebooting,,,when i install the Ruu it says everithing is ok,,and fine,,,you are sucesfully updated your evo ,,,but after reboot it sticj only at a htc white screen and do nothing a cuple of time than restart the device again...i have relocked my bootloader so i dont know what i do wrong or whats the problem,,,my second problem is i cant boot into recovery,,,when i puss the power button to load into recovery its instantly reboot and stuck the white screen with htc logo too. so i really dont know whats the problem,,,,,and im so depressed about that,,,i looking for a solution day after day,,,but i dont find anithing what can solve my problem.... please help me...
(srry for my bad english)
Information aboute phone :
Shooter_U (ICS) S-ON
Hboot : 1.53.0007
Radio: 11.25.3504.06
The RUU what i used (RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe)
Thank you for every answer or solution...

Related

[Q] bricked htc magic 32A ship S-on H

sapphire pvt 32A ship S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-12
RADIO-3.22.20.17
Jan 14 2010,00:14:58
pliz can someone help please,so i tried to flash a rogers rom on my htc magic and now it just boot into recovery and when i try to flash any ruu rom it turns the screen of while flashing the radio,i hev successfuly created a gold card thats why it can at least try to flash.if i send the rom1.zip using fastboot it installs the os but keeps restarting whie showing the rogers logo,
pliz help help
ohh and all other roms are saying main version error
what can i do.

[Q] Please Help HTC Wildfire, Stuck on HTC Logo

Hello all I am facing a great difficulty with my HTC Wildfire i received from someone it wasnt working with them now i have it and i am trying to repair it, I have searched again and again for solution but no success i
The phone info is as follows
buzz pvt ship s-on
hboot-1.01.002
microp-0622
touch panel-atmel224_20aa
radio-3.35.20.10
Dec 27 2010,17:49:10
It loads the logo after 5 mins and the shows then shows the desktop but it doesnt work, it is frozen
The OS in it is 2.37.415.1 i think it is froyo
the handset displays info in Arabic, do i searched and downloaded this "RUU_Buzz_Froyo_HTC_ARA_2.37.415.1_Dr_Raid_Radio_13.55.55.24H_3.35.20.10_release_166943_signed" I tried to flash it from the FASTBOOT it gave an error of Customer ID, so i also tried flashing it from HBOOT but the RUU gave a communication error sayin check usb cradle.
So guyz i have HTC SYNC latest version installed.
ADB Drivers
HTC Drivers
i think almost everything needed is installed, I am using Windows 7 x64bit.
Please guys help reply.
Please reply....as the handset lying infront of me.... cannot wait to repair it.
plz helllppp
plz help people what r u doin in this forum ****tin help me plz

[q] my htc evo 3d won't pass htc welcome screen!?

Hello
I have a serious problem with my phone , started yesterday when i restarted my phone on the button in the system ( like restarting a computer). After that it has started but system booted only to htc welcome screen and no further, so rly help me
Methods i have tried:
- battery pull
- htcdev unlock bootloader ( so my bootloader is now unlocked )
nothing works ;(
SHOOTER_U VT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
What rom did you flashed, being s-on will cause issues flashing the kernel, you must have 4ext recovery with smart flash enabled
(Don't ask me for help as I couldn't care if your phone explodes, eh!
I have the exact same problem. Been using my phone issue free for a year and a half. Today I noticed the gps was on but it was not enabled in the "toggles" menu. I rebooted the phone and now it's in an ENDLESS loop that wont pass the white / green HTC logo boot screen.
I can not access recovery it just reboots.
I have tried:
1) flashing stock RUU through fasboot which did go to 100% ... phone still reboot loops
2) flashing latest stock ICS through fastboot (did not work said CID error)
3) Pulled battery and let phone sit
4) s-off with HTC dev unlocker
At this point I'm not sure what to do... I think this may be a catastrophic hardware failure.
Well I do believe my device is a lost cause.
1) I was able to flash 2.17 via RUU but it didn't change a thing.
2) Did the "Brick" method and downgrade to HBOOT 1.40 Still same behavior.
3) flashed 1.13 fully 100% via RUU.. still same thing.
No matter what I do the phone will not get past the white HTC splash screen. It stays on that screen for about 20 seconds then reboots. Also the phone feels really hot behind the cameras (not the battery) I think it's toast. Luckily I have an old HTC hero for a backup so I'm not completely FUBAR but I'll be on craigslist tomorrow looking for something new. Thinking of jumping ship to PagePlus this might be just the right time.

touchscreen

Hi I have got hold of a one x+ which turns on ok and has no marks on it whatsoever , the only thing wrong is the touchscreen does not work at all , the three buttons are unresponsive and you can not pull up the tab to unlock the screen , I can get to the bootloader screen and it says Tampered , unlocked s-on hboot 1.06 , any ideas is this a hardware issue or a software issue ??????? any help or advice gratefully received.

[Q] Help my evo3d Stuck in Logo htc

Hello friends, master cdma evo3d, I ask you to help provide solutions for my current shooter htc bootloop, stuck at htc logo ...... initial problem when I update OTA all went well, until the requested reboot my evo , apparently after on it just stuck at htc logo and repeated, some friend give me a solution to flash the RUU file it and I did, indeed managed to install but when lit up again the results are still the same stuck on htc logo,more suggestions to install files PG86IMG zip.I doing well, but the result remains the same, namely stuck at htc logo and repeated, ..... then I try (something stupid) to lower HBOOT follow one of the tutorials in this forum with the htc conditions stuck, I was less fortunate in the "bricked device" .... now mainver I've even changed to 2.95.651.5 and I already can not install files RUU or PG86IMG again ..... what do I do now? I hope there is support from all to give you a little knowledge is still newbie to me and pardon my language is probably a mess because I asked for help uncle google to translate .......
***RELOCKED***
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
RADIO-1.09.00.0100
openADSP-v02.06.0.2226.00.0217
eMMC-boot
According to the setup you have you should be able to lower the main version and run the ruu....
Sounds like you did that but it should work. Just in case here are some downloads:
https://copy.com/6l3QGAbVTC1WJim4
https://copy.com/jF1Mm

Categories

Resources