Hello all I am facing a great difficulty with my HTC Wildfire i received from someone it wasnt working with them now i have it and i am trying to repair it, I have searched again and again for solution but no success i
The phone info is as follows
buzz pvt ship s-on
hboot-1.01.002
microp-0622
touch panel-atmel224_20aa
radio-3.35.20.10
Dec 27 2010,17:49:10
It loads the logo after 5 mins and the shows then shows the desktop but it doesnt work, it is frozen
The OS in it is 2.37.415.1 i think it is froyo
the handset displays info in Arabic, do i searched and downloaded this "RUU_Buzz_Froyo_HTC_ARA_2.37.415.1_Dr_Raid_Radio_13.55.55.24H_3.35.20.10_release_166943_signed" I tried to flash it from the FASTBOOT it gave an error of Customer ID, so i also tried flashing it from HBOOT but the RUU gave a communication error sayin check usb cradle.
So guyz i have HTC SYNC latest version installed.
ADB Drivers
HTC Drivers
i think almost everything needed is installed, I am using Windows 7 x64bit.
Please guys help reply.
Please reply....as the handset lying infront of me.... cannot wait to repair it.
plz helllppp
plz help people what r u doin in this forum ****tin help me plz
Related
My HTC is under the S/N : H7XXXXX, but accidentally use the H8XXXX to flash it. Now my HTC unable to start except press the "Camera" key and "Power" key to up my HTC, and it only shows the 3-color screen on it.
When I tried to use the original ROM "P3400 - 24 March 2007" to do the flash, but the upgrading fails and shows "Invalid Vendor ID".
Please help me on this. Thanks
Please advise on a solutions
I have the same serial number on my htc but mine i hardspl it with stock rom wm6.1. Tried the reflashing it and still don't wanna work.also tried the mmty program but it not work on my device
Time to visit the Docs. Sorry!
try changing the spl first... check the old posts for old gene..... man you have to do some reading b4 flashing...which spl its showing now is it oref or olpiro.. is it still detecting the Usb... showing at btm lft corner?
the one and only solution is to send the device to HTC service centre...
ther is also 2nd option,,,, if u flash ur device with stock WM5 version 1.7.455.2 WWE
but this ROM is nowhere available..
i hv faced exact same problem , which u r facing now....thn i tried almost every method...but nothing worked....thn finally i send device to HTC service center.....
next day they returned my device fully working again....
so........this is the only way for u now....!!!
bst of luck..
hello! im not so god at English. so it can be hard to understand what im trying to explanie.
my htc stoped to work as phone a few mouht back. so i bought i new phone,
but now i want my htc back. and i have looked everywhere on this forum for a answer, and ever time i find something it dosent work for me.
in the device info it says that my radio version is None. so thats bad i think?
i tried to flash and put in a new SPL and all of that, but when the phone go to bootloader the connection between the computer and phone disperse. my OS on the computer is win7, and i have tried it on a computer whit xp whit the same results.
so what can i do to make the phone work again?
/Dreamcore
pleas, can somebody help me? i tried everting now, usb monitors and changed spl like a milion times now, what do you need to see my problem?
Model:HTC TYTN
ROM Before Flash:shiped wm6?
Radio Before Flash:??
Bootloader Before Flash: 1.04
Flash failed at:no
Flashing ROM:??
Flashing Radio: ??
Bootloader After Failure:??
CID Before Failure Super CID: ??
CID Corrupt: ??
Radio Corrupt: Yes
No GSM Error: Yes
Stuck In Bootloader: No
Stuck On Windows Mobile Splash:no
Can boot into OS: yes
Tried mtty command set 14 0:no, cant connect to it
Tried wiki problem number 5: Yes
mtty info 2 output: CID:??
Current Device Status: phone dead, but the rest works fine
if somebody wants a usbmonitor screener from my, so pleas help me understand how to do it..
been reading treads for 6 ours now. so pleas, help me
Phone needs...
The Phone needs a new system board! Radio hardware failed!
These phones are getting to be about 5 years old?? or more??
They need new boards!
$90 + shipping online. Or whatever method you can come up with to get one.
Good Luck.
Hi Guys,
I am worried about My HTC Desire C, It gets stuck at the screen where it shows the HTC logo.
Recently I tried to update my phone and I was left with this issue.
I do not know much about the phone
the only details I have is ----->
***LOCKED***
GOLFU PVT SHIP S-ON RL
HBOOT-1.31.0000
RADIO-1.10.98.15
eMMC-boot
Jul 12 2012, 15:44:30
I had been to the service center but they did not help as the phone is out of warranty.
googled but in vain as I could only figure out that I am missing the ruu, tried searching which is the right one for my phone but found nothing.
Would be grateful if someone could help guide me through an give me the right and active link to download the ruu.
Thanks in advance...
Hello friends, master cdma evo3d, I ask you to help provide solutions for my current shooter htc bootloop, stuck at htc logo ...... initial problem when I update OTA all went well, until the requested reboot my evo , apparently after on it just stuck at htc logo and repeated, some friend give me a solution to flash the RUU file it and I did, indeed managed to install but when lit up again the results are still the same stuck on htc logo,more suggestions to install files PG86IMG zip.I doing well, but the result remains the same, namely stuck at htc logo and repeated, ..... then I try (something stupid) to lower HBOOT follow one of the tutorials in this forum with the htc conditions stuck, I was less fortunate in the "bricked device" .... now mainver I've even changed to 2.95.651.5 and I already can not install files RUU or PG86IMG again ..... what do I do now? I hope there is support from all to give you a little knowledge is still newbie to me and pardon my language is probably a mess because I asked for help uncle google to translate .......
***RELOCKED***
SHOOTER XC SHIP S-ON RL
HBOOT-1.58.0000
RADIO-1.09.00.0100
openADSP-v02.06.0.2226.00.0217
eMMC-boot
According to the setup you have you should be able to lower the main version and run the ruu....
Sounds like you did that but it should work. Just in case here are some downloads:
https://copy.com/6l3QGAbVTC1WJim4
https://copy.com/jF1Mm
So,,my evo 3d is stucked at white screen after rebooting,,,when i install the Ruu it says everithing is ok,,and fine,,,you are sucesfully updated your evo ,,,but after reboot it sticj only at a htc white screen and do nothing a cuple of time than restart the device again...i have relocked my bootloader so i dont know what i do wrong or whats the problem,,,my second problem is i cant boot into recovery,,,when i puss the power button to load into recovery its instantly reboot and stuck the white screen with htc logo too. so i really dont know whats the problem,,,,,and im so depressed about that,,,i looking for a solution day after day,,,but i dont find anithing what can solve my problem.... please help me...
(srry for my bad english)
Information aboute phone :
Shooter_U (ICS) S-ON
Hboot : 1.53.0007
Radio: 11.25.3504.06
The RUU what i used (RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio_11.77.3504.00U_11.25.3504.06_M_release_262714_signed.exe)
Thank you for every answer or solution...