Related
Hey guys.
I am assuming my phone is not "bricked" because I can still get to the clockworkmod interface and mount usb and things like that, but I cant get any roms to load. I followed all the instructions and multiple videos to make sure I did my 1.5 right. Seems to be find as far as root. When I logged in to my old backup i had superuser and all.
I tried to install the WARM rom, but didnt work, so i restored my backup and bought Flash Image GUI which then I loaded the WARM zip and it said it found the Kernel and went to install it. It then asked me to reboot, which I did, and then proceeded to install the rest of the ROM via clockwork install ZIP, after doing that I can no longer even restore my backup.
If i try to load WARM, it just sits at white HTC screen and never changes. If I try to load MIUI, it loads to HTC screen, makes a sound and then goes black forever with backlight on but black and buttons lit.
That is all I can currently do. My backup no longer loads or works.
Is my phone bricked? I dont think so since I can get to clockworkmod, but what can I do to try to get it back up and running?
Thanks,
M374llic4.
Your kernel is most likely the problem. When using the the flash image GUI, dont accept when it asks you to reboot, manually hold down the power button and reboot yourself. Hook up your phone to the computer and boot into fastboot usb and fastboot boot recovery.img then install the warm rom. This will ensure you have access to flash the kernel.
JayDaKissEP said:
Your kernel is most likely the problem. When using the the flash image GUI, dont accept when it asks you to reboot, manually hold down the power button and reboot yourself. Hook up your phone to the computer and boot into fastboot usb and fastboot boot recovery.img then install the warm rom. This will ensure you have access to flash the kernel.
Click to expand...
Click to collapse
Hey man, I am following most of what you said, but when yo said boot in to fastboot usb, I know how to do that, but how do i fastboot recovery.img, where is that?
m374llic4 said:
Hey man, I am following most of what you said, but when yo said boot in to fastboot usb, I know how to do that, but how do i fastboot recovery.img, where is that?
Click to expand...
Click to collapse
A friend kinda having a similiar issue with this.. but I tried this all on his computer and not sure if it's driver issues or not.. but I can't get adb to communicate with this phone.. when I use " adb device's " it doesn't show up.. but If i plug my phone it - it picks it up.. Same issue as the guy above it seems.. but when I go into the boot loader - click fastboot and it picks up the usb.. i still can't get them to talk.. any idea's?
m374llic4 said:
Hey man, I am following most of what you said, but when yo said boot in to fastboot usb, I know how to do that, but how do i fastboot recovery.img, where is that?
Click to expand...
Click to collapse
When you rooted your phone, you should have downloaded a folder called newevo3droot or something like that. There's adb files, fastboot..etc and this is how you would have flashed clockworl recovery. Since you are on hboot 1.5, you need to go into fastboot and connect usb so that it says fastboot-usb, then you need to run the command fastboot boot recovery.img. Recovery.img is the name of the recovery image file in that folder. I think it's something like cwm******.img
I did download that, and had some help from someone in the IRC channel and he got me back up up and running! Turns out you have to use USB fastboot on the phone along with fastboot.exe via cmd prompt on the pc with the CWM.exe to load the kernel, then once you do that, you use the phone cwm load from zip to load the rest of the rom and you are good to go!
JayDaKissEP said:
When you rooted your phone, you should have downloaded a folder called newevo3droot or something like that. There's adb files, fastboot..etc and this is how you would have flashed clockworl recovery. Since you are on hboot 1.5, you need to go into fastboot and connect usb so that it says fastboot-usb, then you need to run the command fastboot boot recovery.img. Recovery.img is the name of the recovery image file in that folder. I think it's something like cwm******.img
Click to expand...
Click to collapse
Yeah, thats what I did with some help from a fellow XDA member via IRC and it worked perfect! I was trying to do it all via the CWM on the phone side only, not via command prompt which was my issue.
Did you get the message: Magic Value Mismatch:-.-.-.-.-.-?!
After flashing a new recovery it happens sometimes.
GREEN ZONE
Are you able to go to the recocery menu(power + vol up)? If not, go to BLUE ZONE. If yes, follow these steps
1. check whether you have copied your rom as "update.zip" to your SD card's root directory
2. Go to recovery menu and install update.zip
BLUE ZONE
You may did something wrong while flashing a new recovery. Here is the right method:
1. go back to fastboot mode(power+power+power+vol up) and type these commands on your PC
2. fastboot erase userdata
3. fastboot erase system
4. fastboot erase cache
5. fastboot erase linux
6. fastboot erase recovery
7. fastboot flash recovery recovery.img (change path, if recovery.img is not in the same directory as fastboot.exe)
8. fastboot reboot
Are you able now to go to the recovery menu? If yes, go to GREEN ZONE and follow steps. If not, go to ORANGE ZONE.
ORANGE ZONE
Are able to unpack the update.zip and find the system.img and boot.img files? If not, then go to RED ZONE. If yes, copy these 2 files to the directory where the fastboot.exe is, run these commands:
1. fastboot erase recovery
2. fastboot flash recovery recovery.img
3. fastboot -w
4. fastboot erase linux
5. fastboot erase system
6. fastboot flash system system.img
7. fastboot flash linux boot.img
8. fastboot reboot
ROM is installed. Enjoy it!
RED ZONE
Make sure, that you copied the same recovery.img to fastboot folder, that you had flashed before to your tablet.
Type this command in recovery mode:
1. fastboot boot recovery.img
This command will run the recovery from your PC. After the recovery menu is booted, go to GREEN ZONE and enjoy your ROM!
If this was helpful to you, please do not hesitate to click on Thanks!
Lol, nice to see my post copy/pasted without any links indicated. Anyway, I hope It's helpful for ppl.
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
yellowumbrella said:
Tried following these steps, however, I'm still getting this error... followed this thread
http://forum.xda-developers.com/showthread.php?t=1470823
installed recovery successfully (via fastboot), and update seems to install fine, until I reboot and get the "Magic Value Mismatch" again..
Any ideas?
Click to expand...
Click to collapse
So you installed the recovery via fastboot. Did you manage to boot into recovery mode?
I had that issue, that I couldn't boot into recovery mod from my Folio, by pressing power+Up button. Thats why I added the RED ZONE method. Its like booting recovery from your PC. (fastboot boot recovery.img). All the times I wanna upgrade my current ROM, I have to do this step, because the power+up does not work, and the Folio skips booting in recovery and wanna do normal booting. However there is no Rom installed on machine, so I get the magic value mismatch message.
So try to boot recovery from your PC, but be sure you have copied to your fastboot folder the same recovery, that you flashed onto the tablet.
I hope it was helpful. If something is not clear, feel free to ask.
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
yellowumbrella said:
Hi there, thanks for the answer.
I am able to install recovery images via fastboot.
Device is showing up as a question mark with >fastboot devices
but recovery installs fine. CWM gives a series of e: can't opne/mount /cache errors.
Foliomod 1.4 installs no problem, thanks to the method here
http://forum.xda-developers.com/showthread.php?t=1458876
Click to expand...
Click to collapse
Are you able to wipe cache from recovery? And what else errors are listed?
One more thing, try to flash your boot.img and system.img via fastboot as written above.
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
yellowumbrella said:
If I follow this
http://forum.xda-developers.com/showthread.php?t=1458876
and let it install cwm v 3, I get the cache error and cannot wipe or mount via recovery.
If I follow the ICS thread, and flash the new cwm v5 via fastboot, I don't get the cache error, but the rom simply won't start. If I open the package, there is a boot.img, but not a system.img, just a system folder...
I could try flashing boot.img, but I don't see how that could help
Click to expand...
Click to collapse
Well just to see it clear. So you are able to install Foliomod 1.4, so your Internal storage is not broken.
When I get home, I will check the system folder of ICS rom. There are some method to create system.img from an unpacked folder...
So, in CWM 5.5.0.4 you manage to install Zip from SD card, ROM and GAPPS as well, but the Rom does not boot?!
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
yellowumbrella said:
yup, that's exactly it.
Haven't tried installing Gapps since I can't even get the rom to boot.
I have a perfectly working tablet with foliomod 1.4, and I did get honeycomb to run but some apps crashed so I reverted back to foliomod.
with CWM CWM 5.5.0.4 everything seems to work great, except at reboot, nothing happens (somehow, I no longer even get the magic value mismatch)
------------------
PS. not sure if this is at all relevant, but I cannot fastboot from win7, I'm fastbooting in either ubuntu or xp via VirtualBox, and the device, when calling >fastboot devices shows up as ?????????? (ubuntu) and ? (xp)... :\
Click to expand...
Click to collapse
Try to install gapps as well. Maybe it helps...
nope, no luck even with gapps installed..
just a blank screen..
sigh
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Have you tried all the roms? ICS Alpha 1,2,3 and 4?
Tried 3 and 4, didn't bother trying earlier ones, as it seems the latest ones work for most users
yellowumbrella said:
nope, no luck even with gapps installed..
just a blank screen..
sigh
Click to expand...
Click to collapse
Hmmm strange. I ask it for you on developers forum. What you can still do, is to check the steps, that you did them correctly. In most of the cases users forget something, or do some steps incorrectly.
Try to erase userdata, cache, system, linux and recovery in fastboot. You mentioned you had problem with fastboot under Win7. Problem may occur, in case of not proper erasing.
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
yellowumbrella said:
Thanks, I'll give it another try tonight.
Fastboot in win7 is simply not seeing the device. It shows up in XP and Ubuntu, but as "??????" - not sure if that could be a symptom.
I'll post a reply as soon as I've tried, and let you know how it went.
Click to expand...
Click to collapse
For me it works perfectly on Win7. After Installing SDK and JDK the in the devicemanager it is shown as an Unknown device. Simply add the driver manually to it.
Download driver from attachment.
Copy it to SDK\USB_driver folder
That works for me. After its done, the Folio is shown as "Fastboot" in device manager. But connect the tablet in fastboot mode to your PC before you add driver manually to it.
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
yellowumbrella said:
Thanks for that.
Tried it, still not working in win7. It shows up correctly in device manager, but fastboot itself just doesn't want to see it...
I've attached a screenshot for you
EDIT: screenshot gets resized, but it shows device manager listing
NVIDIA Android Fastboot Device
and a terminal with fastboot not seeing the device
Click to expand...
Click to collapse
When You have win7, You have run the console as admin!
Or copy the complete Fastboot folder to another Destination like c:\temp...
Thanks stefannsv, tried it, still not showing...
But I can access fastboot on another platform, so I assume it's not an issue, I can just switch over to another OS to flash
no go, followed both this original post (tried all steps except orange, cause the rom I'm trying to install has a system folder, not a system.img)
Last method I tried was:
1) boot into fastboot
2) boot cwm-recovery-5.5.0.4.img directly from PC
3) wipe data/factory reset
4) wipe cache partition
5) install zip from SD card and chose the alpha 4 release
installing update...
then back to recovery, reboot and voilà... magic value mismatch again (it had disappeared for a while... )
Also, when booting into CWM 3.0.0.5, I get a series of "E: Can't mount/cache/recovery" type errors.. could this be related?
booting directly into recovery from PC doesn't alllow me to install any ROMS, not even foliomod 1.4 which works if using puppet13th's method
I was flashing a ROM yesterday on my micromax a90s, while flashing the phone went off automatically. Now my phone isn't booting, neither normally and nor in recovery mode. The phone turns on shows SUperfone | Pixel logo and then reboots. This goes on and on and on.
Please help guys.
also Is there any way I can flash stock rom without going into recovery or turning the phone on?
1st of all Does your phone has a fastboot mode? if it does you gonna need the boot.img file of your rom. ( If you are using the stock rom the you need to extract the RUU of whatever rom file u are using and take out the boot.img file from it.)
Then you gotta take your phone to download mode or fastboot mode. if you can take it to the fastboot mode its very simple to solve this problem. If not you gonna need to search for the downloader programs like odin etc. to flash a boot file.
I assume that you got in to the fastboot mode and keeping up the reply.
You gonna need the Android SDK Tools to continue.
Extract the adb tool to a folder and go to that folder by using the CMD ( like c:\android or sth. else)
then you need to copy the boot.img file to the same folder. And write this command to the line while your phone is in fastboot mode.
fastboot flash boot boot.img
the it should say that the boot has been flashed succesfully.
Done your bootloop problem has been solved.
PS: If you are using a JellyBean rom dont flash anyother boot.img file use the JellyBean boot.img file for this operation.
MasterKoala said:
1st of all Does your phone has a fastboot mode? if it does you gonna need the boot.img file of your rom. ( If you are using the stock rom the you need to extract the RUU of whatever rom file u are using and take out the boot.img file from it.)
Then you gotta take your phone to download mode or fastboot mode. if you can take it to the fastboot mode its very simple to solve this problem. If not you gonna need to search for the downloader programs like odin etc. to flash a boot file.
I assume that you got in to the fastboot mode and keeping up the reply.
You gonna need the Android SDK Tools to continue.
Extract the adb tool to a folder and go to that folder by using the CMD ( like c:\android or sth. else)
then you need to copy the boot.img file to the same folder. And write this command to the line while your phone is in fastboot mode.
fastboot flash boot boot.img
the it should say that the boot has been flashed succesfully.
Done your bootloop problem has been solved.
PS: If you are using a JellyBean rom dont flash anyother boot.img file use the JellyBean boot.img file for this operation.
Click to expand...
Click to collapse
I can't get in fastboot mode
Can't you get in any mode like Vol- and power button or some combination like this?
Nope
MasterKoala said:
Can't you get in any mode like Vol- and power button or some combination like this?
Click to expand...
Click to collapse
BTW thanks guys
i sent my phone to service centre and they have fixed it for me!
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Strikerz87 said:
Hey everyone,
This is my first time posting to the forums. I have been trying to get everything done without having to ask questions since there are so many all over the place and I can see how it can get tiring trying to help everyone when their may be an answer out there already if you look. However, I have ran into an issue that I can't seem to find much information on. I have the HTC Rezound that is S-On (apparently you need a Linux machine to get S-Off which I don't have. Using Windows 7.) and have been using fastboot to get things done. I have unlocked the bootloader and have installed the 'Amon Ra' recovery and setup Superuser and SU. As far as I know, I have to use ROM's that are S-On friendly (right?) and I chose to try out 'EclipticRez' and later 'Talon'.
As I tried to flash the ROM's through fastboot it fails with the following errors every time and I cannot continue:
archive does not contain android-info.txt
archive does not contain android-product.txt
From what I found is that it may be a bad download of the ROM. Maybe.... But it happened consecutively with two different ROM downloads.
I also read that maybe the recovery wasn't setup, which as far as I know it is. Should I use a different recovery? Everyone usually references to using CWM, which I wouldn't mind using but I couldn't figure out how to get SU access.
Can I just create the files myself? They are only txt files after all.
If anyone can help me with this I will be so grateful! I'm pretty new to this and it has definitely been a fun learning experience for me
Much thanks in advance!
Click to expand...
Click to collapse
also to note....you dont have to install linux to get s-off....if you follow my guide you can do it straight from a live disk rather than installing it....so it wont erase or mess up your windows partition at all
Solved!
Thank you, Mjones, I finally got it! I knew it was much easier than I was making it out to be. I was missing the kernel! Yeah, a crucial part in the process, I know
I first ran CWM and flashed the ROM over and ran the .zip through recovery (which I couldn't understand at first as I could never find it in the directory) but the installer would only go 50% and would fail... makes sense why now lol
I later flashed TWRP and backed up again after recovering from the fail. I flashed over the kernel and voila! So simple... Had to slap myself.
Thanks again! Case solved.
REV3NT3CH, that is sweet!! I have been hoping there is a way to gain s-off with Windows. I have 7 at work and 8.1 (which I can't get anything to work on) at home. I actually have to focus on work today haha so I'll look into the method and try it out tomorrow if I can. Thanks for all of the help.
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
mjones73 said:
1) Switch to TWRP or CWM for your recovery.
2) You install the rom zip via recovery.
3) You then need to fastboot flash the kernel from the rom zip you downloaded. You don't install the whole rom via fastboot.
To borrow from the CM11 thread.
- Place the boot.img into the platform-tools folder of the Android SDK's install directory.
- Boot to the bootloader.
- Ensure your device is connected to your computer and that your device is now in fastboot mode. This is a white screen and it says fastboot on it.
- Open a Terminal (OSX or Linux) or CMD window (Windows) and cd to the platform-tools directory of the Android SDK's install directory.
- Issue this command to flash the boot.img we placed in the platform-tools folder earlier:
Code:
fastboot flash boot boot.img
- Watch the output of the terminal, it should say something like "sent successfully".
- Finally send this command:
Code:
fastboot reboot
Since you're s-on, you'll need to do this whenever you install a new rom. Using these steps, you can install any rom you want.
Click to expand...
Click to collapse
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Sorry, don't know anything about that phone.
ecols33 said:
I need to be able to do it via fastboot, as my Motorola Electrify M is stuck in a bootloop and there's no way I could find to boot into recovery. I'm using ./fastboot update name_of_update.zip and it is an official OTA .zip but I still get this error. Any suggestions?
Click to expand...
Click to collapse
Did you try this first? (Right from Moto's site)
Perform a factory reset using external keys
1. Power off the phone, press and hold volume down button, press power button
2. Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3. Wait for the "triangle ! / Android" screen then go on to step 4
4. Press both Vol up and Vol down key simultaneously. A menu will come up
5. Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
6. After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
7. Phone will reboot to initial setup screen.
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
not working
hariom.gupta11 said:
Thank You So much, Mine case also Resolved. I was too frustated sice last 3 days cause my phone was in dead mode. At the end, fastboot flash boot boot.img Worked. ThankYOu
Click to expand...
Click to collapse
not working on my 4c. write successful but when reboot is completed it goes to previous state.
"the user data partition can no longer be used"
zb602kl_x00tdb
L0RDZ3RO said:
PLEASE HELP! I have a Huawei P8 and I tried to update to android 6.0 (GRA-L09xxxxxxxxxxxB317 or something) Went to install it and now im stuck in bootloop (a very annoying one, I can rarely get into eRecovery and eRecovery is not able to fix my problem: "Getting package info failed") so I went into fastboot&rescue mode and I did the flash thing via my PC (that Fastboot flash boot boot.img etc.) but I get this error saying: "FAILED (remote: Command not allowed)" for any image im trying to flash. My fastboot/bootloader or whatever it's called is locked my android is unrooted and stock android. I don't know how to unlock it I can't find anything anywhere.. HELP ME
Click to expand...
Click to collapse
I have same problem on asus zenfone max pro m1 I bought it online said used and now working
can't boot into recovery.
can't boot into system.
Only EDL Mode and Fastboot Mode, but fastboot is Locked whic I cant unlock because I cannot boot into system to toggle USB Debugging and allow OEM unlocking
Qualcomm is harder to flash than MTK that can use SP FlashTool.
on this I use QFIL but keeps "sahara error". I tried searching and try moving firmware file to bin but no Luck. I'm currently trying different version of QFIL Tool.
If it FAILS my only HOPE is to use MUT-QCfire which will Require a "SmartCardReader" Which is a bit pricey and I don't even know if it will work on my device.
So I have been installing this rom http://forum.xda-developers.com/showthread.php?t=2188931 .
I installed just the rom and not the update and now my phone will not boot it turns onto the htc first screen and vibrates a few times.
I have tried going into recovery mode and starting again but recovery does not now boot the phone restarts and the above happens.
I have installed fast boot on my computer but when I run it, it flashes up for a second then closes.
Thanks in advance for your help.
sodamhall said:
So I have been installing this rom http://forum.xda-developers.com/showthread.php?t=2188931 .
I installed just the rom and not the update and now my phone will not boot it turns onto the htc first screen and vibrates a few times.
I have tried going into recovery mode and starting again but recovery does not now boot the phone restarts and the above happens.
I have installed fast boot on my computer but when I run it, it flashes up for a second then closes.
Thanks in advance for your help.
Click to expand...
Click to collapse
Well, without knowing any details about your phone and what update you were on, which recovery you used, whether or not you are S-On / S-Off, then we're just shooting in the dark trying to help.
If fastboot flashes for a sec and closes, then you are not using fastboot right. You have to run it from the Command Prompt. You don't double click on the fastboot.exe .
Can you still get to the bootloader mode?
And I have to ask, but you're sure you got the right rom from the right forum as there are quite a few different variants of the Desire...?
es0tericcha0s said:
Well, without knowing any details about your phone and what update you were on, which recovery you used, whether or not you are S-On / S-Off, then we're just shooting in the dark trying to help.
If fastboot flashes for a sec and closes, then you are not using fastboot right. You have to run it from the Command Prompt. You don't double click on the fastboot.exe .
Can you still get to the bootloader mode?
And I have to ask, but you're sure you got the right rom from the right forum as there are quite a few different variants of the Desire...?
Click to expand...
Click to collapse
How do I open fastboot from a command prompt I just need to know what to type.
I can still get into bootloader fine on the phone and my pc knows its contected via usb.
I know the phone was running a different recovery mode than standard but I don't know witch one. I think it may have been xloader or something with a x.
Its a standard desire. Regards Wayne
I have manged to load bootloader with command prompt and I want to remove the rom I have installed how do I go about this? Regards again, Wayne
O.K so I have loaded up bootloader and thought -w would be the command I am looking for, all I get from bootload on my computer is: waiting for device. I have attached a screen shot. Regards Wayne
You'll have to find an appropriate recovery.img and use fastboot to install. Make sure the img file is in the fastboot directory and while connected in bootloader/fastboot mode:
fastboot flash recovery recovery.img (where recovery.img is the name of your file - it can be whatever.img and you can rename it to whatever you want as long as you don't change the extension .img)
and see if you can boot to recovery at that point. If not, then you will probably have to use an RUU to return to stock and start over.
If you can get into the custom recovery, then you can reinstall another rom. Keep in mind, if S-On, then you will probably need to use fastboot to install the boot.img like so:
fastboot flash boot boot.img (here boot.img should remain named that)