I was trying to insert some kind ROM in my phone, but it didn't turned out well but rather deleted my system.ui :crying:
After reset factory and wipe cache done in my phone I noticed that my phone is not showing anything on the status bar (although I'm receiving a sort of text message), except for the default icons only, and I learned that wipe dalvik cache is not even showing in the default CWM of the phone (wipping the dalvik cache is a requirement in installing an update ROM, right? what I've read to instructions from a blog) and note that I haven't yet Flashed my phone because there's no blog that really give a great tut about how to really use ADB, MKT, Odin thingy so i really dunno how to fix this one, :crying:
And now, I'm really struggling to make my status bar get back again, CAN SOMEBODY PLEASE HELP ME!!!?
(I'm a newbiee to this kind of topics, so please explain well if any reply to be made )
Related
hi all,
Since a week or 2 my phone is constantly giving messages like this: "The application LogsProvider (process com.sec.android.provider.logsprovider) has stopped unexpectedly"
When i make a new contact or a new file on my phone, it disapears after rebooting. When i uninstall all my apps and reboot the phone, all the apps are back and nothing has been uninstalled. Even when i format the sd card on my pc, and reboot the phone, all the content is back as if nothing has happened.
When i try to reset it to factory settings, it opens in recovery mode. When i then select to wipe all data or wipe cache and reboot, nothing has happened to it, everything is still on the phone like before. Even when i deselect the backup and automatic recovery checkboxes before i reset to factory settings, nothing has been wiped.
When i try to update the phone with kies, the update installs correctly, but when the phone reboots, the same old firmware is still installed and the settings are intact.
When i try to update the phone with Odin, everything goes well, and it says 'pass' in green color. when i reboot the phone, the same old firmware and settings are still there.
I run stock firmware from november '11, which i can tell by dialing *#1234*
Can anyone help me identify this problem, and is there a solution? It really looks like this phone has some write protection or something..
i made a youtube video that describes the problem, but this forum doesn't allow me to make a link.
anyway, my phone stays stuck on the 3rd of september and that sucks.. any solutions plz?
the video
i can't post the link, so let's try it like this:
First type the 'www', then the 'youtube', then the '.com', then type 'watch?v=n6SH8QDJr94&feature=g-upl'
Flash custom kernel, do a factory reset in CWM and see if the data is gone.
i've already tried to install cwm, but first i needed to root my phone. When i tried to root it, it could not find the Root.zip on the sd card, although i'm pretty sure i put it there, it just disapeared after the reset, just like all the other files..
Flash it [kernel] through Odin (PC).
allright, i will try that, thanks already!
ehm, even that didn't do anything, i will upload a youtube video in a few minutes..
the youtube video:
type 'youtube', then '.com', then '/watch?v=P_D2EbPF0Ik&feature=youtu.be', without the '..
really strange how i can update the kernel and nothing has changed!
I really start thinking there is some kind of write protection or the internal storage is totaly screwed up?
Seems your nand is partially borked, and is stuck in a state where it will not update the memory, so it is "stuck" at a specific point in time.
I have heard that it's POSSIBLE (and I stress possible) that flashing with repartition ticked with the PROPER .pit file will resolve your issue, but I cannot say this with any certainty as I have not actually done this myself. But at this point, it seems you don't really have anything to lose by trying.
I can't seem to find a reliable download link for the .pit file for the I9100 right now... it's called u1_02_20110310_emmc_EXT4.pit. I'll see if I can't find one when I have a spare moment.
EDIT: Found one - http://forum.xda-developers.com/showpost.php?p=28321934&postcount=35. BUT!!! Only use it if you are positive you have an I9100. (check on the label under the battery) Flash it with a stock firmware with re-partition checked.
False alarm. Turns out the link is dead.
EDIT 2: This looks promising... http://forum.xda-developers.com/showthread.php?t=1448351
I've searched around the forums and so far, most of the results were people having trouble with their phone getting stuck in recovery/boot/download mode.
My phone, however, is stuck in the call mode where the keypad takes up most of the screen. Everything else is working fine with the phone, as I can see unread text messages and other programs that running and notifying me of updates in the background. Wifi and data work fine as well.
The problem is, I can't get out of the call keypad mode and into my home screen with all my apps. I've tried restarting, turning it on/off, taking out the battery, and charging it via USB to the computer. Nothing is working! Please help :crying:
Clear data on phone & if that doesn't work maybe try a factory reset ?
Do the following steps below:
- Boot to CWM recovery
- wipe cache partition
- wipe dalvik cache (under advanced)
- fix permissions (under advanced)
- reboot system now
This issue sounds familiar......like a launcher problem. I have 3 fixes:
Clear data of your launcher
or download another launcher, by trying to get to your play store app by universal search or from the playstore on the pc
if strangely none of the above works, flash another rom or reflash your rom if you like it that much
Note that this message should have been the 1st, cause if im right the two solutions you recieved above should work. The problem is if your running stock ics 4.0.4, you may end up with the emmc brick bug if you use recovery or do a factory reset. We dont know what your using since you never told us.
Hi Guys,
So this is my first thread here and I'd like to ask something related with my devices, the bootloop
Details :
This morning I changed my system font, and it said to reboot, so I reboot from the pop up menu and here things goes wrong,it keep rebooting by itself, I tried to search and reinsert the battery, but it stay the same, after that I wipe dalvik-cache from CWM, reboot fix, and then reboot. The result is still the same, then I did factory data reset, and it still stay the same.
Now, I'm complete noob here, I've read this and can't understand 75% written on it, please give me a solution for this !
Another Details :
The font is Segoe UIL (Light) taken directly from my PC (Windows 8), is it what causing the problem ? I use the Font Changer FULL to change the font
Help ???
EDIT: SOLVED
Hi guys, recently my S3 started to play up on me. The screen started to flicker and would only stop when I touched (and held) the screen. From then, things have gone from bad to worse and the phone now features a completely black screen after it is powered on. Therefore I cannot see the startup animation or anything else (including the home screen etc) but can hear the notifications and vibrations.
I can fortunately use CWM as this is not effected at all and the screen works perfectly fine. I have flashed 3 different roms and wiped my whole device since the problem started hoping it was a software problem.
I have additionaly tried:
- Clear the Dalvick Cache
- Clear cache
- Wipe data/factory reset
- Wipe all SD card data (don't ask)
Hopefully someone can help I would really appreciated it. (Not enjoying using the old Symbian phone atm) :crying:
Thanks
Make sure you are flashing roms meant for your version of the device.Try changing kernel or flash the latest stock firmware available after a factory reset. This should replace every file on your phone. Any problem would be fixed by this. Secondly what CWM do you use? Is it touch? If so does the touch work? Not likely a panel issue if the display is working in CWM, Can be a digitizer issue causing the screen to act up.
Hi all, I'm experiencing a strange issue but very annoying and I hope that I can find some help with the expert out there. I installed a MIUI 11 based rom and everything was almost perfect. I had to encrypt my phone because it's a company phone and they want encrypted phones. When I was prompted to to so I've followed few indication and the phone restarted and it stayed for ages with the boot logo apparently doing nothing...there was no signal of life but maybe it was just encrypting in the background and I didn't know...other times I encrypted my data I could see a timer but not this time. Well, as a matter of fact I've force restarted the phone and from that moment on all my problems started. After few seconds of bootlogo a message errore popped up saying that I had interrupted the encryption process and that I would have needed a factory reset to restart phone...and so I did...but no way, the same message was always appearing...tried also a full format, factory reset, repairing file system...NO WAY! still the same message. I was panicking...then I've decided to install an AOSP based rom and BOOM, the phone booted up and I had my phone again...Then, proud of this success, I've decided to retry installing MIUI 11; so I made a clean flash (formatting data including internal storage) and, WTF, after few seconds the same [email protected]#@#ing errore message that I had interrupted the encryption process and that I should have made a factory reset, that obviously didn't worked, exactly like the first time.
So, forgive my looong message, but what the hell is going on here??? How is possible that this stupid error message survives to all the full wipe I made including internal storage??? how the hell can I get rid of it? It seems I can't install any of the MIUI rom...tried a couple but same result...
please help...I very much prefer MIUI11 than any other AOSP or similar ROM...
thx
andrea
twrp ,Mount vendor, wipe vendor system data internal.
Try to flash latest vendor only first , then flash the whole rom.
This might help bcuz vendor makes phone encrypt itself.