Hello,
I currently have a JXD S6600C Tablet [Device model: S6600C-A13-01-20131100926] which is not booting up. It is switching on, but the screen is not going past the "JXD" logo. I left it switched on for several hours, but it stays stuck on that screen.
I also reset the tablet to its factory settings through the recovery mode, but it is still getting stuck on the "JXD" screen.
Also, before I encountered this particular problem, I rooted the tablet, and was installing several games and apps. I restarted the tablet after rooting it, and had no problems; it is only after I installed some games that I encountered this problem.
Now, I don't have the drivers of this particular tablet, and I don't really know what I am supposed to do.
I would be very grateful if someone would be so kind to help me with this dilemma.
Thank You.
Related
Hi guys,
I spend a lot of time searching forums, Google, and wikis, and didn't find anything what could helped me. So decided to ask you for help.
I got GoClever Tab A93.2 which OS is Android 4 (ICS). Today was trying to do a trick with "vold" (to trick Tab, that it should read my MicroSD card 32GB as main SDCard). And as you can guess, it went very wrong. When Tab rebooted it was kinda freezing, you get couple a seconds to move around and it stucks and returns to the lockscreen, and it's never ending story, tried to reach settings menu, bu unsuccesfully. So then tried to do hard reset (Power buton + Volup). And here comes new problem. There appears Android (bot) lyeing down with red triangle, and recovery menus doesn't appear. After longer time it resets and goes to freezing locking screen.
So I'm asking for your help, because I believe that there's a solution, you guys got much more experience with android than I do. So please help me out here.
Thank you all...
I have an Impression i10A-LE tablet that won't bootup. When powering on the device, I get the "Leader" logo, followed by the "Impression" logo a few seconds later. The screen gets stuck on the logo.
I've tried just about every key combination that I've found others mentioning online and NONE of them get me to a recovery screen.
Does anybody have any ideas how I can restore this tablet to factory and/or re-flash it?
has anyone unbricked the leader impression i10a-le,because ive tried everything out there,for the past 2-3mounths and still
im bricked. so if anyone has been successful with the i10a-le pleeessss us know about it. thanks . I wanted to know if anyone with i10a-le had a copy of the update.zip 230mb that came up when u went to settings,about,update. If so i would really appreciate a copy.
I went to there website to try and get assistance ,but its either down or gone altogether.So any help would be very helpful. thanks.
Hello everyone. This is a long story, so thanks in advance to read it and try to help me.
I've got a Trekastor surftab Ventos 8.0 this one --> http://www.trekstor.de/detalles-de-surftabs/product/272.html?file=tl_files/generatedPdf/272-de.pdf
model st80208-2 . I'm not sure if it is the 8 or 16 GB. And I don't know how to check it because the tablet is bricked.
How did I brick the tab?
This is a good question. I had lost the charger and I tried with another one with a higher voltage. This ruined the batery. And when I found the charger the tablet show a strange behaviour. It was trying to start but reboot before to finish. I was able to finish a full boot but the batery only works for a few minutes. After solve the batery problem, now I can start the tablet without problem about the voltage but, it seems like all this failed attemps to boot have made some damage somewhere.
What I have now?
The tablet start. It show's the trekstor logo. After that it show's the android logo, and that's all. It stuck's looping in the android logo.
What I have tried?
Everything.
1.- Custom recovery. http://forum.xda-developers.com/showthread.php?t=2039964 or this http://forum.xda-developers.com/showthread.php?t=1995984
This method not working in my tablet even when it was not bricked. (I tried it, when I was trying to get root access a month ago).
Power + Volumen (-) gets nothing at all. It's start normally. (and loop in my currently situation)
Power + Volumen (+) gets this screen http://cdn.howtogeek.com/wp-content/uploads/2012/12/android-recovery-mode.jpg and anything happens no matter what button I'm pressing even with the custom recovery in the sdcard.
2.- I tried to flash the tablet, but I didn't find information about how to do it and trust me, I have searched a lot.
I triend with this software: "Amlogic Image Burning Tool v.1.6.2.2" and this firmware http://forum.xda-developers.com/showthread.php?t=2039964 . But I get the error "find no upgrade config, please load it manually". I'm pretty sure I doing something wrong, but I have no experience with this software or flashing in general.
That's all for now I'm tired of reading this forum and this other one in german. (thanks to google translator) http://www.android-hilfe.de/surftab-ventos-8-0-forum/ and I did not find anything useful for me
You people are my only hope. (Any Star wars fan in the room?:laugh:
So any help would be wonderful, thanks in advance and sorry for my mistakes, english is no my mother language.
Okay so I have a Acer tablet b1-850, and I had a huge brainfart while I was setting the tablet up how i wanted, I don't have a custom recovery just the standard android recovery (my mistake), but okay I installed xposed framework and I had to do a reboot so I rebooted and everything was fine. Then I got prompted to do another reboot and that time it got stuck, so now everytime i try to boot the device it just gets stuck on the acer screen and doesn't move. I have tried going into the recovery menu factory reseting from there all that. I researched for hours trying to find a fix but no one seems to have one for the b1-850. If you can point me in the right direction or tell me how to fix it that would be great. Thank you.
Bump, someone help me please fr.
Hello guys.
I would really appreciate if you could shed some light onto my problem.
I recently acquired a Huawei Y9(2019-JKMLX3). The device is full stock, no custom recovery or root.
Also recently, right out of nowhere, the device ran out of battery, and when I tried to turn it on after a charge, I just got an awful bootloop... (Gets to the HUAWEI logo, and restarts over and over again)
Ok, i kind of know how to deal with this situations(already downloaded stock rom), but the real problem is that I can't access recovery by any means. I've tried every key combination, and nothing... Except for one time, when i did get a recovery screen, but i got FRP lock
Haven't been able to get to that screen again.
So, any recommendations? Is it dead, or is it that I'm doing something wrong.
Thanks for the support on this!
where did you get the stock firmware from?? did you resolve your issue from that time??
please share.
Thx