Hi All,
I got the CyanogenMod 11 snapshot m12 in my HTC one x+. My 3g/lte connection automatically switches to edge and the network connection goes off but the signal strength indicator shows it as full range. I am not able to call or receive call unless I reboot or toggles to aeroplane mode. This also happens automatically when I get a call while 3g is enabled. Is this a problem with my network or something with the cyanogenmod? Is there any tool available to check if anything is wrong with my phone. ?
Thanks in advance
I am using the international version of HOX+
Tried flashing the boot.IMG? How about a LOGCAT
I have flashed the boot.img. I am getting 3g when i reboot. But some times the network automatically switches to edge and my phone goes out of the network. I dont identify it till I try to make a call because the network range icon shows full range . then I have to reboot to fix it. This problem also happens when I get a call while 3g is enabled and then it switches to edge after the call is finished. And the phone goes off the network.
sreeju1 said:
I have flashed the boot.img. I am getting 3g when i reboot. But some times the network automatically switches to edge and my phone goes out of the network. I dont identify it till I try to make a call because the network range icon shows full range . then I have to reboot to fix it. This problem also happens when I get a call while 3g is enabled and then it switches to edge after the call is finished. And the phone goes off the network.
Click to expand...
Click to collapse
What is your kernel and modem version?
Kernal version is 3.1.10-g4d3cf1c
Baseband is 3.1024.171H.33
Related
Hi, how to set my galaxy s2 permanently in WCDMA only Mode, not in WCDMA prefereed.
In menu option is missing.
I change WCDMA only whith *#*#4636#*#* , but to close security menu galaxy S2 auto change mode to WCDMA prefereed :crying:
how to fix it?
Madboy128 said:
Hi, how to set my galaxy s2 permanently in WCDMA only Mode, not in WCDMA prefereed.
In menu option is missing.
I change WCDMA only whith *#*#4636#*#* , but to close security menu galaxy S2 auto change mode to WCDMA prefereed :crying:
how to fix it?
Click to expand...
Click to collapse
1. Disable Mobile data, then wait for 3-5 minutes
2. Enter Service mode, then change network to WCDMA only, repeat it like 2 times.
Done.
Correctly good luck...
Enviado desde mi GT-I9100 usando Tapatalk 2
my problem is described here -Can others be so kind as to verify if they are also having an issue with receiving voice calls or SMS while their phones are using the 2G network for data access. (3G and wifi either unavailable or turned off.)
We have this issue with Orange and I have tested it on one Sunrise iphone4 and we had the same issue. Which is not surprising since Orange and Sunrise are operated by the same staff. It does work correctly over Swisscom.
I raised this case with Orange over one month ago and they still have given me no concrete feedback as to why their network behaves like this.
(FYI this is a network issue and not related to any phone configuration).
Feel free to harass Orange about this. It might get them to pull their fingers out a bit. When I raised the case it took me about 10 calls to their support plus 2 visits to Orange shops to finally get a technician who was capable of understanding this simple but critical issue.
EXACT STEPS LEADING TO PROBLEM:
1. Force phone to use GSM (2G) mode only or be in an area with no 3G coverage, or if your phone chooses to use the 2G network
2. Disable switching to wifi:
3. Connect to 2G packet data, download email or download webpages: Status Bar-> spinning wheel
4. While packet data is connecting, using another phone place a call to your phone
5. After packet data has connected, using another phone place a call to your Phone
EXPECTED OUTCOME:
You expect the packet data connection to either DROP or be SUSPENDED (depending
on network capabilities) and for the phone to ring indicating an incoming call or SMS.
ACTUAL OUTCOME:
The packet data connection persists and remains active; the phone does not ring
and the call is handled by the network as if the phone was unreachable (for most
users this means forwarding to voicemail).
REPRODUCIBILITY:
always; no exceptions.
This has been tested extensively on the Orange network by me and many other users.
Tested devices which all show the same issue, iPhone4, iPhone3GS, Iphone 3G, several Android models.
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
namicone said:
Hey guys, I have a T-Mobile branded Galaxy S5 (SM-G900T) that I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar. So then I'll turn off WiFi and I will have bars but the 4G LTE indicator will be gone and the only way to get it back is to reboot the phone. Any ideas as to what this could be? I have tried using both the T-Mobile & Metro PCS APN settings but the issue still happens no mattter which APN the phone is set to. Any help would be greatly appreciated. Thank you!
Click to expand...
Click to collapse
What rom are you using? that would be the first question. Little more info sir....thanks
AxAtAx said:
What rom are you using? that would be the first question. Little more info sir....thanks
Click to expand...
Click to collapse
No ROM, it's stock.
wifi calling enabled and set to only make calls on wifi?
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
galaxyuser88 said:
This will happen when you have wifi calling enabled. That is why you see the cell signal bars go gray or grayed out. Turn off wifi calling and you will see you signal bars come back, as long as you have cell signal (service) at your house.
Click to expand...
Click to collapse
Having WiFi calling enabled won't affect your data and messaging at all unless there is a connection issue with the router.
namicone said:
I'm using on Metro PCS and whenever I connect to wifi I can't receive mms messages. I will get the text and it will ask me to download the image but then I get a never ending progress bar.
Click to expand...
Click to collapse
It sounds like a connectivity issue on the routers side if the APNs are correct. I would go back to Metro PCS APNs then check your signal strenth and link speed in the phones WiFi settings, then check to make sure WiFi calling does not display an error in the call settings. If all 3 are good then check your client list on router and make sure phones IP address and MAC id is there. If IP and MAC id are good run diag log on router and possibly change/test different wireless channels on your router.
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
namicone said:
I never have WiFi calling enabled so I don't see that as a cause, and I have tried both the MetroPCS and T-Mobile APN settings and it still happens. I'm still able to receive calls and send text messages but I can't receive MMS messages or access data. The only way to fix the issue is to turn on airplane mode for about 10 seconds and then turn it off and I get the 4GLTE signal indicator back along with full service. Its really weird because when this happens, I still have a signal indicator with 3-4 bars but the only the 4GLTE indicator disappears.
Click to expand...
Click to collapse
I will get the same issue as stated above. When you have bars present with no data icon, its because your phone is latching on to another network when MetroPCS is not to be found. At my office, T-Mobile service is the pits, yet i get bars present. I usually open the dialer and type *#0011# and it will show what band your phone is picking up, from there you can tell if you are really on MetroPCS or someone elses network.
HI, I am a lucky (for now) owner of OPX.
I have problem with network switching. Iam living in small village and i have to use network roaming (yes, i can use others providers network as well for free - in my country).
I'am in P4 network(base/mother network), but in my village there is no good signal for this network - so, i just using another one - usually PTC 3G because this network has best signal in my area.
I have few android phones in the same network (P4) and when i select network, phones do not switch to any other network - even if there is no signal of this network (Nexus4, Nexus5, Sony Xperia Z and CAT S40).
With OPX its different, and very problematic. When i switch to PTC network, it works and not switch to any other network until i left the phone and let it for sleep... (5-10 min) then network switch to the base network P4 and ussually there is no signal in this network, and i have to wait until i can make a call or send SMS message. I dont have the problem with any other phone. I see, that the problem intensifies in specifed room, where is Wifi(dualband) router - but not only. I suppose, its software problem.
EDIT: Switching to P4 network happens when phone screen is off and phone is in idle, after turn on the screen and waiting few seconds, phone ussualy connecting to PTC netwok with good signal.
Screen with bad signal: 1drv.ms/1JmvSU1
EDIT2: I found another freaky thing, after while of phone IDLE, iam turning on screen, and there is full P4 signal, after 1-3sec freeze (yes, freeze, laag) signal agin is 0 and i can enter phone PIN code to unlock.
And there is my question, how to make this works well ? Is there any way to force select only one network ? (i dont need switchning). Maybe can i do this with root privilieges ? I hope, you can help me guys.
Screenshots:
1drv.ms/1MpPiY0
1drv.ms/1ZeE55R
Cheers
HI, I am a lucky (for now) owner of OPX.
I have problem with network switching. Iam living in small village and i have to use network roaming (yes, i can use others providers network as well for free - in my country).
I'am in P4 network(base/mother network), but in my village there is no good signal for this network - so, i just using another one - usually PTC 3G because this network has best signal in my area.
I have few android phones in the same network (P4) and when i select network, phones do not switch to any other network - even if there is no signal of this network (Nexus4, Nexus5, Sony Xperia Z and CAT S40).
With OPX its different, and very problematic. When i switch to PTC network, it works and not switch to any other network until i left the phone and let it for sleep... (5-10 min) then network switch to the base network P4 and ussually there is no signal in this network, and i have to wait until i can make a call or send SMS message. I dont have the problem with any other phone. I see, that the problem intensifies in specifed room, where is Wifi(dualband) router - but not only. I suppose, its software problem.
EDIT: Switching to P4 network happens when phone screen is off and phone is in idle, after turn on the screen and waiting few seconds, phone ussualy connecting to PTC netwok with good signal.
Screen with bad signal: 1drv.ms/1JmvSU1
EDIT2: I found another freaky thing, after while of phone IDLE, iam turning on screen, and there is full P4 signal, after 1-3sec freeze (yes, freeze, laag) signal agin is 0 and i can enter phone PIN code to unlock.
And there is my question, how to make this works well ? Is there any way to force select only one network ? (i dont need switchning). Maybe can i do this with root privilieges ? I hope, you can help me guys.
Screenshots:
1drv.ms/1MpPiY0
1drv.ms/1ZeE55R
Hey guys! I'm running into an issue with my S6 Edge+ where if I make a phone call in a 4G area, it immediately drops to H+ after I finish the call and refuses to re-connect to 4G automatically even with wifi off. I have to go into connection settings, switch to LTE/CDMA, and swap back to LTE/CDMA/GSM. Is there a way to make it reconnect to LTE automatically after a call?