[solved] need help, xt910 stuck on black screen after boot logo - Motorola Droid RAZR

--solved--
Okay I need some help to fix my phone because somehow I did something to my phone it really did not like. I will try to keep it as short as possible.
Since last week I was running liquidsmooth nightly LS-KK-v3.2-2014-10-13-umts_spyder on my xt910 and it was running as smooth as it could get.
This morning I decided to simply reboot the phone for no particular reason, battery above 90%, it shut off, it turned back on, showed the motorola logo and then a black screen. nothing else and I have not been able to make it show anything else.
volume+, volume- and power button in every combination, result in the same situation.
on the black screen I can press volume keys to make it vibrate but I am not sure what it actually does.
windows recognizes the device as motorola usb composite device and an MTP XT910, so far so good. Even RSD lite shows it as xt910 and connected though all device properties (IMEI etc.) are N / A and flashing results in "phone could not change to fastboot mode"
I found a similar problem described here: http://forum.xda-developers.com/showthread.php?t=1767469 (especially the last post).
Since the last reboot I installed plants vs zombies 2 and reinstalled google chrome, nothing else has changed.
I can't get into the fastboot menu to select ap fastboot, I tried doing the right steps at the black screen blindly but apparently it is not the same screen.
I am pretty clueless what to try next and I am not even sure if the phone is still being charged when I connect it to the charger.
sooo what to do?
thx a lot

fleity said:
Okay I need some help to fix my phone because somehow I did something to my phone it really did not like. I will try to keep it as short as possible.
Since last week I was running liquidsmooth nightly LS-KK-v3.2-2014-10-13-umts_spyder on my xt910 and it was running as smooth as it could get.
This morning I decided to simply reboot the phone for no particular reason, battery above 90%, it shut off, it turned back on, showed the motorola logo and then a black screen. nothing else and I have not been able to make it show anything else.
volume+, volume- and power button in every combination, result in the same situation.
on the black screen I can press volume keys to make it vibrate but I am not sure what it actually does.
windows recognizes the device as motorola usb composite device and an MTP XT910, so far so good. Even RSD lite shows it as xt910 and connected though all device properties (IMEI etc.) are N / A and flashing results in "phone could not change to fastboot mode"
I found a similar problem described here: http://forum.xda-developers.com/showthread.php?t=1767469 (especially the last post).
Since the last reboot I installed plants vs zombies 2 and reinstalled google chrome, nothing else has changed.
I can't get into the fastboot menu to select ap fastboot, I tried doing the right steps at the black screen blindly but apparently it is not the same screen.
I am pretty clueless what to try next and I am not even sure if the phone is still being charged when I connect it to the charger.
sooo what to do?
thx a lot
Click to expand...
Click to collapse
You have a black screen but the phone isn't really turned off...
When you see that black screen,press and hold the power button until you see the white line flashing for a moment,like on Tv,that means it's turned off.
Immediately after that press all 3 buttons,vol-,vol+ and power button to get into the boot menu and then choose AP Fastboot from there.
Sent from my Razr XT910

interesting, first turning it off by holding power allowed the three-button combo to bring up the fastboot menu. thanks a thousand times.currently flashing sbf image
:highfive: worked

fleity said:
interesting, first turning it off by holding power allowed the three-button combo to bring up the fastboot menu. thanks a thousand times.currently flashing sbf image
:highfive: worked
Click to expand...
Click to collapse
No problem
Sent from my Razr XT910

just a quick thought, is it possible that I provoked the black screen by using liquidsmooth on the system1 slot?

Not likely. Liquid Smooth has been in my #1 slot for quite a while. (Not stock side, just 1st slot on safestrap....)

fleity said:
just a quick thought, is it possible that I provoked the black screen by using liquidsmooth on the system1 slot?
Click to expand...
Click to collapse
very unlikely

Related

New streak, start up and it freezes (HELP)

i just got my dell streak and so far when i press the start button i see the dell logo and then the screen just hangs there (black) until i remove the battery. I tried to charge the battery up to full but i since i do not see a battery charging indicator i really dont know what to do with it. help
everything is stock, i dont even know if its GB or not since i havent been able to start it up It's a rogers phone though
Tried a factory reset
Sent from my Dell Streak using xda premium
yeah i tried that. i also went into fastboot and it says on the bottom "default nv checked #2" and i cannot click on the fastboot option. When i press the volume rocker up or down the screen goes dark and then comes back in a little bit saying that the "screen calibration FAILED"
i did however succeed one time in getting the screen calibration to "pass" and then i was able to press the fastboot option. From there i used the DSC installer "flash" exe and it updated the phone. Then after the reboot i was able to see the lock screen but unable to press any buttons.
im figuring
1) the touch screen is defective, hence iam unable to press anything and thus the screen calibration keeps failing
2) the connect to the touch screen is broken or lose and i might need to open'her up to see
3) fack it, ill just tell rogers to send a replacement.
So far ive done step 3 but since its the weekend, i felt like tinkering.

[Q] Semi-Brick : is it the hardware or Software

My tablet is HKC P077A with 8GB ROM, 512 RAM and a 7'' Touch screen (Android 4.0.3). I am having 2 problems
When I switch on the tab, first "HKC" logo comes to screen and then disappears to show "android". This is standard. But after that the thing wont move forward. Just keeps on showing "andriod" with a flashing like thing implying the loading process. But after long wait there is no start screen and nothing changes. It just hangs there....
But if somehow got it to get into normal working(I donno how, but It sometimes boots ok and gets into normal working mode, with home screen and apps and everything). So once I get it right the other problem I am having is that the touch is giving VERY bad response. I have to click at spots multiple times to select that thing. Also the response is very slow. Its like the tablet is hanged. But when I tried connecting a mouse (through OTG) and everything works fine again. Is my touchscreen gone bad..??
I am already done with, reset (from "settings> backup and reset") [I cant find how to do factory reset on this model from "off" state(read below)]
I have tried to get into reset screen by pushing "Power Button+Vol up" button. Then I know the tab gets turned on (I can hear a small white noise from the loudspeaker) but nothing comes to screen. So the "Robot with heart open" is never shown. I also tried using "power button + Volume down", this takes me to a screen written in chinese. Now, I don't know Chinese but from the look and feel, its a troubleshooting window, where I can check weather components of my tablet are working (eg. I click one menu(with difficulty), then the front cam turns on, another menu makes loud sounds from speaker and another flashes many colors in screen etc). I found that most are ok except something called "T" (On the screen, its the last item to the right, is it "touchscreen"??)
So, what can I do to get my tab to work smooth again..? Is the touchpad having trouble..? Need I do any specific troubleshooting..?? Any Ideas on which key combinations to get on to the "factory reset" menu from off state..??
Also can u please specify the key combinations to the tablet factory-reset menu from "off" state.

[Q] completely bricked razr xt912 cdma (usa)

hey guys,
so lets start from the exact moment death plagued my phone. With the phone turned on and properly working I removed the sim card to clean out dust from certain areas of my razr to make it look well kept lol. Little did I know, this small action made my phone screen go black. So i continued to do a manual power down ( power button + vol. down). after i did this the screen suddenly came to life and it appeared as if someone unplugged the tv cable from a tv set and your left with gray static. Well after this i went directly to the boot screen under "AP fastboot flash mode" to see what happened. this appeared: Device is LOCKED . status code : 0. Guys i tried droidrazrutility 1.82 to flash ISC back on and did an entire data wipe. To my dismay the exact same screen of gray static appeared after a successful flash/boot. Please any advice?

Black screen RED/BLUE notification light

Hi Guys,
my SGS6 Edge is not turning on, i have tried VolUp+Power , VolDown+Power also with home button nothing helps to turn on.
Do you have any idea
i have this problem too.
phones currently unresponsive, blue light flashing and none of the power/volume/whatever keys seem to be doing anything.
trying to let the battery drain and hope it boots back up once its switched off but cant find a way to reboot it at the moment.
Try to go into download mode...voldown+power+home...it never fails..once there you can cancel the download mode and the phone will (or at least should) boot normally...if it doesn't go into download mode as well..then...it's FUBAR
amirage said:
Try to go into download mode...voldown+power+home...it never fails..once there you can cancel the download mode and the phone will (or at least should) boot normally...if it doesn't go into download mode as well..then...it's FUBAR
Click to expand...
Click to collapse
none of the options worked, phone was completely unresponsive with just the LED blinking every now and again.
i found that disconnecting the battery worked perfectly and now my phone works again, it only needed a reboot.

M5 boot stuck half-way, rest of screen black, shuts off after a min

Hi all,
I got this Xperia M5 that's been giving out warnings about memory being full and I suppose it finally gave in. It only partially boots after like a full minute of showing you those blue waves. When it 'boots' the screen is black and nothing works, except you can see the status bar with just the battery icon, no-SIM icon and the clock.
Weird thing is when the device is powered off, you can press the power button once and it'll display a large battery indicator which shows the percentage normally-- I've seen this go up from 0 to over 90 something incrementally.
But when it's 'on' the way I just described, the battery is always at 0% with a red ! next to it.
Anyway, when it's in this weird half-life mode, you can actually pull down the notification bar normally, and tap stuff as well. Flashlight works, you can see an actual WiFi list (nothing happens when you connect) etc. When you launch stuff through here though, like settings, it won't open anything. It'll make the sound as if it's launched something but the remainder of the screen will still be black.
Using the dedicated camera button, I can access the camera. It works (sort of), meaning you can see the camera display where the screen used to be black. And it immediately says "system process is not responding," so I'm guessing this is a system issue where it can't load basic stuff like the homescreen?
Whatever you do or don't do, it stops responding after a couple minutes and shuts itself off.
Stuff I've already tried:
- Safe mode (volume down + power), just 'boots normally'
- Recovery mode (volume up + power) done that for over two minutes, does nothing or just 'boots normally'
- Hold down the tiny yellow 'off' button under the SIM/SD cover, did nothing.
- Xperia Companion: PC won't recognize the phone either in that zombie state, or when it's off, so I tried 'device cannot be detected', shut phone down, held down volume down button, connected USB still holding down, waited for a while and viola, nothing happened.
It's factory OS, never messed around with it and I don't know the version (could be 5?).
Any ideas?
Guys at this point all I'm wondering is if anyone ever managed to brick a phone that's as semi-responsive as this one, in the history of bricked android phones anywhere.. I mean how could it be bricked when you can (sort of) boot and even open the camera?
you said it boots in download mode?
paranoic(d) said:
you said it boots in download mode?
Click to expand...
Click to collapse
No I wouldn't say download, it's weird-- there's the status bar at the top and soft navigation keys at the bottom, but the homescreen in between these is black. I tried tapping this black area to see if stuff is there logically but you just can't see them, but there was no interaction, no sound or anything.
I am able to pull down the status bar to reveal the usual buttons and such, like I mentioned before you can turn on the flashlight, click to see a list of available wifis etc. But you can't access settings through here, I mean you tap settings and the main part of the screen is still black.
The only way to get the screen to work is to open the camera through its dedicated button, where the camera display works normally, you can switch cameras etc. Tried accessing the gallery through here but it didn't work.
I just don't wanna buy a new phone when this one doesn't seem bricked at all. If it like didn't respond at all and nothing appeared on the screen I wouldn't think twice before buying the first phone I see on Google.
im afraid that you have to flash stock rom again if you will boot into download/fastboot mode.but your problem seems strange.what was the last thing you have done before phone stuck like this?
paranoic(d) said:
im afraid that you have to flash stock rom again if you will boot into download/fastboot mode.but your problem seems strange.what was the last thing you have done before phone stuck like this?
Click to expand...
Click to collapse
Not my phone but it'd been going on about low memory for a while now. I got the PC to recognize it once in that zombie state, so I'll try that with Companion if I can get it to half-boot again. I'll post updates if anything happens.
antiglue said:
Not my phone but it'd been going on about low memory for a while now. I got the PC to recognize it once in that zombie state, so I'll try that with Companion if I can get it to half-boot again. I'll post updates if anything happens.
Click to expand...
Click to collapse
okay keep us updated

Categories

Resources