Hey all
I am considering purchasing RCA Pro 10 tablet that runs Android 4.4. From the research I did on XDA for it I was able to find that it can be rooted using Kingo. But I couldn't find any mention of a custom recovery that can support it. As you know we need the custom recovery to flash ROMs and such. Anyone know of any custom recovery that will work with this tablet?
Thanks
it hasent been rooted yet the 4.4 one which is the one walmart had on black friday is differen t some how then the orginal the connectors are in different places and the modle number is different kingo does not work
I rooted mine but it was a jumbled mess of a process. First install SuperSU, then install and run iroot, afyer that using pdanet drivers plug it into your computer and use kango, open SuperSu and update your binary, finally use a root browser and remove the app iroot installed. Iroot installs the su binary but doesnt set anything up properly, kango will set everything up but cant install the files needed for some reason so you have to use them together. Its messy but it works.
I got 2of the new of the rca pro 10 edition with the 1.5 GHz quad core m/n rct6203w46 the easyist way to root it is plug it in your PC let it download the drivers download pdanet on your PC see if there's more drivers 4 it download Kingo root set tab to USB debuging open kingo root plug in tab to USB kingo root will find it click root it will go through a few steps it will ask if u have a special kernal choose other opt it will restart tab few times and it will say its rooted and install super su if not click root again then it should be rooted restart tab after it says rooted keep attached to PC it will say root status yes then should be 2 options remove root and root again hope this helps you guys who bought the new one on black Friday big plus it never deleted Aney apps app data pics music ect and you don't need SD chip for it ... as far as a custom kernal / recovery i have no idea sorry regarden that
I have my Pro10 RCT6203W46 rooted and have TWRP installed as custom recovery. Here is a link to another thread that may help: http://forum.xda-developers.com/showpost.php?p=57437408&postcount=113
Droidify said:
I have my Pro10 RCT6203W46 rooted and have TWRP installed as custom recovery. Here is a link to another thread that may help: http://forum.xda-developers.com/showpost.php?p=57437408&postcount=113
Click to expand...
Click to collapse
Cab you elaborate on how you got TWRP installed? I have it rooted via Kingo Root!
Thanks
Sargeue said:
Cab you elaborate on how you got TWRP installed? I have it rooted via Kingo Root!
Thanks
Click to expand...
Click to collapse
Sargeue,
Using the link I supplied, I downloaded (using my PC) the TWRP image from the last link PaTF provided. I copied the TWRP image over to my tablet. Then using the link mexicandroid provided to the Rashr flash tool on Google Play, I installed it and followed the instructions in the app to flash the TWRP image to my tablet and voila!, I had a custom recovery.
I can also verify everything works in TWRP, such as backup and restore, wipe menu, etc. No custom ROMS available that I know of, so did not try to flash any ROM.
Of note: If you allow an update to the RCA firmware, you will need to re-flash TWRP as the firmware update overwrites the custom recovery.
Hope this helps.
Droidify said:
Sargeue,
Using the link I supplied, I downloaded (using my PC) the TWRP image from the last link PaTF provided. I copied the TWRP image over to my tablet. Then using the link mexicandroid provided to the Rashr flash tool on Google Play, I installed it and followed the instructions in the app to flash the TWRP image to my tablet and voila!, I had a custom recovery.
I can also verify everything works in TWRP, such as backup and restore, wipe menu, etc. No custom ROMS available that I know of, so did not try to flash any ROM.
Of note: If you allow an update to the RCA firmware, you will need to re-flash TWRP as the firmware update overwrites the custom recovery.
Hope this helps.
Click to expand...
Click to collapse
Great, will try it out. Really don't need custom rom, just like having nandroid backup. Thanks for you help!
Perfect! Worked great, easiest recovery I installed to this date. Thanks for your help again Droidify.
Thanks to the thread maker. I knew a lot with this thread.
Thanks
Thanks to Patf for posting the files, Sargeue for asking Droidify to elaborate, and Droidify for elaborating I was able to do this with no problem. This wasn't my first time rooting, and I've flashed a cfw that already had a custom recovery on it which rooted a device( don't know if thats particularly considered rooting), but I think this was the first time I flashed a custom recovery. The TWRP recovery boots just fine how it should and everything works if the instructions are followed. Thanks a bunch guys. I had already got an update prior to this and I am not sure nor do I remember what it exactly was. Its the only update I've got since I had the tablet. I still attempted this, so it was risky, but never the less everything went fine.
Hi all! I somehow soft bricked my RCA tab after updating to an OTA. Anyone have a nandroid backup of the stock ROM? Thanks!
Same problem here. OTA update screwed it up looking for help.
RCA RCT6203W46 1.9.50 firmware upgrade failures
Below is the method I found to resolve the issue I had with the most recent firmware upgrade failing. Use at your own risk.
How to resolve RCA RCT6203W46 1.9.50 firmware upgrade failures (this should also unbrick your device provided you can access stock recovery):
1. Place these 1.3.51 and 1.9.50 update zip files on your external sdcard. If you can only boot into recovery, you will need to eject the sdcard and use an alternative method to transfer these files from your PC to the sdcard and then place the card back into your tablet.
2. Boot into stock recovery. You can do this from a powered off state by simultaneously depressing the power and volume buttons until the white RCA boot screen appears. Once this screen appears, release the power button but REMAIN DEPRESSING THE VOLUME BUTTON until you are in recovery.
3. Select: Wipe cache partition. (use the volume button to move selection up or down, press the power button to make selection)
*Factory reset wipes cache too in step 4, but I am cautious.
4. Select: Wipe data/factory reset. Warning: you will lose any app you had installed.
5. Select: apply update from sdcard. Select the 1.3.51 zip file. Allow it to complete.
6. Select: apply update from sdcard. Select the 1.9.50 zip file. Allow it to complete.
7. Select: reboot system now.
8. Enjoy your upgraded RCA RCT6203W46 once again!
Probable causes for issue:
Rooted system (forgot to unroot prior to upgrade)
Removed or froze any stock app (including Vudu, Walmart, etc)
Modified a system file (build.prop, etc)
Bad luck
installation aborted...
Hello! I just did this guide but it didn't work. I always get Installation Aborted with Step 5 and Step 6 both of them are Aborted. I followed carefully your guide but still no good for my tab. I uploaded the two installation aborted message from android recovery. The first photo is when i update the firmware 1.3.51.zip and the second photo is installation aborted too when i update the firmware to 1.9.50.zip... Please see those photos if you can see what it made to abort the installation process. I hope you can help Droidify. And also, when i rooted my tab pro 10, i only remove the Vudu app and another app that was included but not the Walmart app...
Did not work for me...
Droidify said:
Below is the method I found to resolve the issue I had with the most recent firmware upgrade failing. Use at your own risk.
How to resolve RCA RCT6203W46 1.9.50 firmware upgrade failures (this should also unbrick your device provided you can access stock recovery):
1. Place these 1.3.51 and 1.9.50 update zip files on your external sdcard. If you can only boot into recovery, you will need to eject the sdcard and use an alternative method to transfer these files from your PC to the sdcard and then place the card back into your tablet.
2. Boot into stock recovery. You can do this from a powered off state by simultaneously depressing the power and volume buttons until the white RCA boot screen appears. Once this screen appears, release the power button but REMAIN DEPRESSING THE VOLUME BUTTON until you are in recovery.
3. Select: Wipe cache partition. (use the volume button to move selection up or down, press the power button to make selection)
*Factory reset wipes cache too in step 4, but I am cautious.
4. Select: Wipe data/factory reset. Warning: you will lose any app you had installed.
5. Select: apply update from sdcard. Select the 1.3.51 zip file. Allow it to complete.
6. Select: apply update from sdcard. Select the 1.9.50 zip file. Allow it to complete.
7. Select: reboot system now.
8. Enjoy your upgraded RCA RCT6203W46 once again!
Probable causes for issue:
Rooted system (forgot to unroot prior to upgrade)
Removed or froze any stock app (including Vudu, Walmart, etc)
Modified a system file (build.prop, etc)
Bad luck
Click to expand...
Click to collapse
First of all Thank You for trying to help, you are doing more that Walmart & RCA combined.
I followed your instructions and this process did not work for me. I have attached pictures of my screen after using both zip files...
Also I only rooted the tablet using Kingo I didn't remove any system apps
I think a key difference in my case is that I had TWRP installed and was able to boot into the system and unroot, install stock recovery, and then perform this procedure. Seems like you guys never had TWRP installed as recovery. I have a couple other tricks I am working on, but be patient as I vet them and see if something might work. Sorry this didn't work for you guys!
Any updates on this?
Droidify said:
I think a key difference in my case is that I had TWRP installed and was able to boot into the system and unroot, install stock recovery, and then perform this procedure. Seems like you guys never had TWRP installed as recovery. I have a couple other tricks I am working on, but be patient as I vet them and see if something might work. Sorry this didn't work for you guys!
Click to expand...
Click to collapse
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
PHug said:
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
Click to expand...
Click to collapse
Unfortunately, I'm boned as far as returning it goes because rooting voids your warranty.
PHug said:
No didn't use TWRP.
My tab is only 20 days old & still under warranty so I'm just going to send it back to RCA.
Was hoping to fix it myself so I wouldn't have to wait 4-6 weeks.
Click to expand...
Click to collapse
Well then there is no sense for me to keep trying to resolve this considering I have no way to test fixes, especially if what I posted resolved my particular case. I did send someone a test to try and if that is successful I will share, but outside of that I tried guys.
I guess the lesson learned here is that we all have to remember to unroot and not delete the apps that came with the device, only freeze them using Titanium or similar and unfreeze them before updating.
Related
Hi fellow nookers,
My friend (@ikingblack on XDA) has released 2 guides as of now, and unfortunately, his guides are a little misleading, and has you flashing packages left and right. Hopefully, this time I will try to get it right. I am not trying to be rude, just trying to point out that his guides are a little scant and incomplete. And please feel free to leave bad comments so I can improve it.
All right. Enough of that yucky stuff. Here's the Guide:
Requirements:
1. Rooted Nook Color with ClockworkMod Recovery (3.0.0.10 or later)
2. An SDCard that is bigger than 200 MB.
3. A Browser on the Nook that has the option of downloading to the SDCard.
4. Internet Access on the Nook is not required (NO).
5. A flashable ROM for the Nook on your SDCard
6. A ClockworkMod SDCard, which is optional but makes it easier (Especially Step 8). (search around the forums, will post link later) Please keep in mind that you have to take the SDCard out whenever you want to boot the Nook Software, and not ClockworkMod. Also, when I say boot into ClockworkMod in the guide, then you can just insert the SDCard and reboot.
Notice: Whenever I say download a certain file, it means download it to your SDCard. It does not matter how you do it, just get it on there. You can download it on your Nook, or download it on your computer and put it on the SDCard. It really doesn't matter.
Step 1.
Make sure you have a valid backup that is current. If not, make one, either through ROM Manager or ClockworkMod.
Step 2. First, download the preparation dual boot file. If you have dual booted before, and haven't removed it, then skip this download. Download Here.Then download the stock Nook ROM flashable zip, I recommend this one: Download. It is the latest version and keeps ClockworkMod. Keep in mind that the package has to keep ClockworkMod. Then download the root file if you want root: Download. Then the Second root file: Download. Finally, download the dual boot file: Download. Please remember the file names so you know what to flash. If you want, you can rename them.
Step 3. Boot into ClockworkMod, (If you have an SDCard with ClockworkMod on it, insert it and reboot.) and go into "Mounts and Storage" (Use the Volume Buttons to scroll and the n/home button to select). Then select Format /System, and select yes. Then format Data.
Step 4. Press the Power button to go back, and select "Install zip from SDCard". Then select the second option or something and browse for the first downloaded, or the preparation dual boot file, called prep-dualboot-0.1.zip, and select "Yes". After it is done, repeat Step 4 except with the second downloaded file, or the Stock Nook OS file, called update-nc-stock-1.2-keepcwm-signed.zip.
Step 5. If you have the ClockworkMod SDCard, take it out now. Then reboot the device by going back (can be achieved by pressing power) and selecting "Reboot Device Now.
Step 6. It should boot into the Stock Nook OS. Follow the setup procedure. Keep in mind that you need WiFi.
Step 7. If you want root, then reboot into ClockworkMod. If you can't, or don't know how, then use the 8 failed boots method. 8 failed boots means boot it up, and before it reaches the logo, (The pulsing B&N Nook Color) shut it off holding the power button. Even though this takes long, I don't know of anything else.
Step 7 for ClockworkMod SDCard users: Just insert your ClockworkMod SD, and reboot! Simple.
Step 8. Flash the second file, or the root file called ManualNooter-4-4-278.zip. Then Flash the second root file, called apk-enabler-1-1a-signed.zip. Then if there is anything else that you need to flash, then flash it. Please keep in mind that as of now Dalingrin's kernel should not work with it unless he releases an update. I haven't checked this, so please correct me if needed. After you are done, flash the last package, the dual booter, called eclair-dualbootv2.zip or something. Then reboot and hold the home button when it says multiuboot loading. It should load the nook os.
Step 9. Then download Rom Manager, from here: Download, and then install it. Flash ClockworkMod by tapping the first button, and selecting Nook Color (not Nook Color (old)). Then reboot into recovery.
Step 9 for ClockworkMod SDCard users: This time, you will have to flash ClockworkMod onto your device. Just follow normal Step 10.5 (Not for
ClockworkMod SDCard users).
Step 10. Reboot into ClockworkMod again, via Rom Manager. When it is in ClockworkMod, then insert the SDCard where you have the backup and the Custom ROM that you want to dual boot. Once you have inserted it, go into Mounts and Storage, and select Mount SDCard. If the option says unmount SDCard, then you are good to go. Then flash the ROM that you want dualbooting, and any other zip that you want on the non-stock or custom ROM. After you are done, then go back, and select backup and restore. Select Advanced Restore and select your latest backup. Then select restore data. Once it is done, then you can reboot and it should reboot into your custom ROM (if you didn't hold the home button on boot).
You are now done! When you want to boot into the Nook OS, hold the home button when you power on and the nook says multiuboot loading. If you want to boot up your custom ROM, than don't hold the home button. You can also now get into ClockworkMod by holding both volume buttons when it says multiuboot loading. Please do not hesitate to post with complaints, improvements or the like. Thanks! I want to improve this and my knowledge in every way I can.
EDIT - I updated the guide on 4/29/11, and I might have made some errors. Post if you find any!
Credits:
@koush for ClockworkMod Recovery and Rom Manager which we all use at least weekly.
@HamNCheese for the root.
@rookie1 for the dual boot file
@nemith for the flashable stock
All of the developers who make dualbooting possible!
PS: PM me or post if I missed any credits!
Nice guide!
Yeah, better than mine I guess. Nice guide, once again.
Also, my guide just is not easy to understand, not incomplete.
Good guide.
Worked for me...
The only issue was that after step 6 I could not get back into Clockwork and couldn't get the Rom manager apk to open.
I used a Clockwork bootable SD card with the 1.2 apk updated zip on it and that worked well for me.
Dual-booting Phiremod and Nook 1.2!
pndo1 said:
Hi fellow nookers,
My friend (@ikingblack on XDA) has released 2 guides as of now, and unfortunately, his guides are a little misleading, and has you flashing packages left and right. Hopefully, this time I will try to get it right. I am not trying to be rude, just trying to point out that his guides are a little scant and incomplete. And please feel free to leave bad comments so I can improve it.
All right. Enough of that yucky stuff. Here's the Guide:
Requirements:
1. Rooted Nook Color with ClockworkMod Recovery (3.0.0.10 or later)
2. An SDCard that is bigger than 200 MB.
3. A Browser on the Nook that has the option of downloading to the SDCard.
4. Internet Access on the Nook is not required (NO).
5. A flashable ROM for the Nook on your SDCarY
Notice: Whenever I say download a certain file, it means download it to your SDCard. It does not matter how you do it, just get it on there. You can download it on your Nook, or download it on your computer and put it on the SDCard. It really doesn't matter.
Step 1.
Make sure you have a valid backup that is current. If not, make one, either through ROM Manager or ClockworkMod.
Step 2. If you have dual booted before, than no need to do this step. If you haven't, this is a requirement. Just download this file: Download.
Step 2.
Download the stock Nook ROM flashable zip, I recommend this one: Download. It is the latest version and keeps ClockworkMod. Keep in mind that the package has to keep ClockworkMod. Then download the root file if you want root: Download. Finally, download the dual boot file: Download. Please remember the file names so you know what to flash. If you want, you can rename them.
Step 3. Boot into ClockworkMod, and go into "Mounts and Storage" (Use the Volume Buttons to scroll and the n or home button to select). Then select Format /System, and select yes. Then format Data.
Step 4. Press the Power button to go back, and select "Install zip from SDCard". Then select the second option or something like browse for zip. Find the first file downloaded, or the Stock Nook OS probably called update-nc-stock-1.2-keepcwm-signed.zip, and select it, then select yes.
Step 5. Once you are done, go back again, and select "Reboot System Now". It will boot into the stock Nook OS. It will ask you to setup your device, so go ahead and do it.
Step 6. If your Nook does not have internet at the current moment, and there is nothing that you can connect to, then hold the volume up button on the screen with the video. While holding it, tap the lower left of the screen, then the lower right. A button titled Factory should appear, and tap on that. Then while still holding the button, then tap the lower left. A button called Skip OOBE should appear, tap that and you should be at the homescreen.
Step 7. If you want root, then reboot into ClockworkMod. If you can't, or don't know how, then use the 8 failed boots method. 8 failed boots means boot it up, and before it reaches the logo, (The pulsing B&N Nook Color) shut it off holding the power button. Even though this takes long, I don't know of anything else.
Step 8. Flash the second file, or the root file called apk-signer-1a.zip or something. Then if there is anything else that you need to flash, then flash it. Please keep in mind that as of now Dalingrin's kernel should not work with it unless he releases an update. I haven't checked this, so please correct me if needed.
Step 9. Make sure it boots by going back and rebooting. If it doesn't boot hold the power button until it turns off, and power on again. If it works, than you can try downloading ROM Manager (Here (The first link) and rebooting into clockworkmod. If it doesn't work, than repeat step nine.
Step 9.5. If you have used @rookie1's dual boot method, than skip to step 10. If you haven't, then flash the file you downloaded in Step 2, the Prepare Dualboot file called prep-dualboot-0.1.zip.
Step 10. Flash the last package, the dual booter, probably called eclair-dualbootv2.zip or something. Flash it . Then reboot and hold the home button when it says multiuboot loading. It should load the nook os. If it loads correctly, then reboot into ClockworkMod again.
Step 11. Flash the ROM that you want dualbooting, and any other zip that you want. Then go back, and select backup and restore. Select Advanced Restore and select your latest backup. Then select restore data and restore data only. Once it is done, then you can reboot and it should reboot into your custom ROM (if you didn't hold the home button on boot).
You are now done! When you want to boot into the Nook OS, hold the home button when you power on and the nook says multiuboot loading. If you want to boot up your custom ROM, than don't hold the home button. You can also now get into ClockworkMod by holding both volume buttons when it says multiuboot loading. Please do not hesitate to post with complaints, improvements or the like. Thanks! I want to improve this and my knowledge in every way I can.
Credits:
@koush for ClockworkMod Recovery and Rom Manager which we all use at least weekly.
@HamNCheese for the root.
@rookie1 for the dual boot file
@nemith for the flashable stock
All of the developers who make dualbooting possible!
PS: PM me or post if I missed any credits!
Click to expand...
Click to collapse
Finally! This is what a guide looks like (no offense other guide guy)
ad720 said:
Worked for me...
The only issue was that after step 6 I could not get back into Clockwork and couldn't get the Rom manager apk to open.
I used a Clockwork bootable SD card with the 1.2 apk updated zip on it and that worked well for me.
Dual-booting Phiremod and Nook 1.2!
Click to expand...
Click to collapse
@ad720
Wait, so you can't root it? Have you tried Step 7?
Thanks @ace7196
Tried my best.
@ace. No offense taken. I can;'t always write perfect guides.
pndo1 said:
@ad720
Wait, so you can't root it? Have you tried Step 7?
Click to expand...
Click to collapse
No, I'm rooted. The issue was that I was unable to boot into clockwork after flashing the 1.2 zip that was supposed to keep clockwork intact. Since I hadn't flashed the root file yet I could install Rom Manager and flash Clockwork that way.
I just used a clockwork bootable microSD with the new Auto-nooter (and with the files from the OP on it) and flashed everything from there until I was rooted and could install ROM Manager. Worked fine and I'm dual booting Phiremod and rooted nook 1.2.
@ad720
I'll update the guide.
can't get phreakmod to boot, just loops
First off, thanks for the guide. It was a great help but I failed to make a backup of my rooted stock ROM and had to start all over again when I got to the end and had to restore the data only
Also I couldn't boot back into clockwork after loading 1.2. Even the 8 reboot method had no effect on my nook. I did some reading and came to the same conclusion as ad720 at about 1am last night and finally got it booting but couldn't get phreakmod version 6.1 to load. It just loops on the phreakmod boot screen. I was able to get the v4 of honeycomb and my stock rooted ROM to boot but no other ROMs seem to work.
I do have another question though. How do I know which ROM I am backing up with clockwork, or does it back up both ROMS as a dual boot backup?
Also, I want to keep my stock rooted nook for magazines and books but run phreakmod or maybe a newer ROM, do I have to go through the entire process again or can I just load a new ROM without screwing up my stock ROM?
Lastly, somehow mine ended up backwards, if I hold the "n" I get honeycomb, if I do nothing I get stock, which is fine at least it works, but I am not sure how it got reversed, I think I must have reversed a step when phreakmod wouldn't work and I had to redo it with honeycomb.
Normally I'd just keep messing with it until I got it figured out but I have already wasted well over 12hrs getting to this point so I have decided to breakdown and ask for assistance.
Any help or insight would be appreciated.
Thanks in advance
If you are fine with what you have, then you are ok. If you want to get CyanogenMod 7 or Phriemod with stock on a dual boot, then you will have to follow the guide again. I suggest you erase data, and system and then flash Phriemod. The backup problem is probably because you have an old version of Clockwork Mod Recovery, so try updating it via Rom Manager (Downloadable from the link in the op or from the Market). To update, just launch the app and click Flash ClockworkMod Recovery, then choose Nook Color, not Nook Color (old). Then, again from Rom Manager, tap "Reboot into Recovery" and then tap ok. After it reboots into ClockworkMod, then try your backup. Post if this works! If it does, I will put it in the op.
There are a lot of extra and unnecessary steps in this guide.
I did the entire process without having to reboot once last night, and didn't follow any posted guides except the original dual boot eclair guide.
Sent from my PC36100 using Tapatalk
Like what? If you would provide me with what could be removed, that would help a lot.
I have a question about backing up your rom when you boot from the SD card is there a process to do this?
Sent from my NookColor using XDA Premium App
You mean backup the ROM that you have on the SDCard?
pndo1 said:
Like what? If you would provide me with what could be removed, that would help a lot.
Click to expand...
Click to collapse
Once I put my kids to bed I will post my process.
Sent from my PC36100 using Tapatalk
working on it
Thanks for the quick reply. I have updated CWM to 3.0.2.8 that didn't help.
I reinstalled phiremod and it still just looped. I downloaded ver. 6.0 and tried that and it still looped.
I then wiped and started again this time with phiremod first and I'm sitting here watching it loop. Strange.
I'll keep trying different things and hopefully with report back with what worked for me.
thanks for the input.
jm
pndo1 said:
You mean backup the ROM that you have on the SDCard?
Click to expand...
Click to collapse
Yes back up my CM7 before trying this.
Sent from my NookColor using XDA Premium App
jm20 said:
Thanks for the quick reply. I have updated CWM to 3.0.2.8 that didn't help.
I reinstalled phiremod and it still just looped. I downloaded ver. 6.0 and tried that and it still looped.
I then wiped and started again this time with phiremod first and I'm sitting here watching it loop. Strange.
I'll keep trying different things and hopefully with report back with what worked for me.
thanks for the input.
jm
Click to expand...
Click to collapse
Did you just wipe or did you format system, data, and cache?
Sent from my PC36100 using Tapatalk
Hi,
I have a samsung S3 and I want to update it to lollipop or above as my nexus 5 has started randomly rebooting and I need a phone to use whilst I sort a replacement.
I have been following this guide: wccftech.com/install-aosp-android-5-1-1-lollipop-on-galaxy-s3/ as I'm a bit of a noob when it comes to this custom rom business.
I have rooted the device and installed clockworkmod recovery v6.0.1.2. and copied over the rom and the gapps file to my phone.
I then booted into recovery mode and made a backup of the current setup.
I then did the factory reset and the cache wipe(s) and installed the new zip for lollipop and then the gapps.
This is where I received an error "E: Error in /sdcard/0/0/0/Download/gapps-lp-20150314.zip (status 7) installation aborted".
I figured that I should restore to my backup now but when I press it, the app says that files can't be found.
I can see that the files that I backed up do exist but they appear to have been dumped inside a new directory called /0/0/0 (I think this has got three levels because I've tried this a few times).
Now I can't boot into an OS to get any other roms on the phone and I can't edit the files on there (I googled and saw a possible fix for the gapp status 7) and I can't get clockworkmod to recognise an external SD card so I can copy over a new rom or file to try (I have googled and it's suggested the FAT32 is the format for this phone and my size of SD card (16GB)).
Can anyone offer me some advice on how to get out of this situation?
Thanks
Sounds like you're at a place where you should start exploring using your computer instead of a recovery in order to fix your system.
I recommend using the PC software Odin and installing a stock ROM of your device. (Or perhaps using fastboot)
There's plenty of guides on how to use Odin both here on XDA and on the rest of the internet if you just look around a bit
EDIT: This link contains a (possible) fix for your problem.
http://forum.xda-developers.com/showthread.php?t=2522762
Don't use cwm as it is an outdated recovery. Use twrp instead.
Sgt.Mindfudge said:
Sounds like you're at a place where you should start exploring using your computer instead of a recovery in order to fix your system.
I recommend using the PC software Odin and installing a stock ROM of your device. (Or perhaps using fastboot)
There's plenty of guides on how to use Odin both here on XDA and on the rest of the internet if you just look around a bit
EDIT: This link contains a (possible) fix for your problem.
http://forum.xda-developers.com/showthread.php?t=2522762
Click to expand...
Click to collapse
I had a look at the link you suggested and it's one of the suggestions that had come up whilst I was googling for a fix. Unfortunately, I don't have any way to get the updated script onto the phone as the phone isn't picked up by my pc whilst it's in this state, and I can't get the recovery tool to recognise the sd card so I can't put it on there either.
I'll take a look at the stock rom or fastboot option and see if I can get back into the phone. Maybe then I can apply the fix in the suggested post.
Thanks
audit13 said:
Don't use cwm as it is an outdated recovery. Use twrp instead.
Click to expand...
Click to collapse
I'll see if I can install twrp through odin.
Thanks for your help
If the phone works in download mode, try to flash a stock rom too.
Update - fixed
Hi all, just wanted to let you know that I fixed the device with the combined advice from here:
I installed TWRP after holding the volume down + power + home buttons and then pressing volume up when the message appears (I can't remember what this mode is called). I then flashed the device with the TWRP image.
After this I rebooted into the TWRP recovery mode (Volume up + home + power and then release power button when the samsung logo appears).
At this point, the device appeared on my windows machine so I could upload a new image to the internal memory.
I decided to copy on CM13 and GApps.
I then wiped the cache, system, data, and davik cache using TWRP, then I installed CM13 and GApps.
After a reboot the device came back up as a new install.
Hopefully that information may be useful to somebody.
Thanks for all your help
I'd say I'm above average when it comes to rooting and installing ROMS, but this one has be stumped. It may just be that I simply need to flash the stock ROM and try again, but here's my dilemma.
I successfully installed the correct version of TWRP for my tablet, as was I able to root it, but Xposed posed an issue. Upon flashing Wanam's custome Xposed zip, I am got the dreaded "Encryption Failed" screen. Assuming that Wanam's custom Xposed zip is what I need, because I'm using a Samsung device, what might I have done wrong? I have now formatted and wiped everything and am back to the setting up the device run through, but TWRP is still installed. If I do need to flash the stock ROM (firmware), I can't because I have not found it when searching here or Google.
If anyone has successfully installed TWRP, rooted, and installed Xposed on this tablet, I beg of your assistance. Also, a link to the stock firmware would be amazing.
EDIT: I will add that after I was able to get back to setting up the tablet and no longer facing the "Encryption" boot loop, as well as flashing Wanam's Xposed uninstall zip, I no longer have root and flashing the Chainfire SuperSU does not give root, but brings back the "Encryption" boot loop.
EDIT 2: I have found the stock firmware for this tablet. I found it on two file hosts. One is the well-known RapidGator. The other is an obscure (to me anyway) filehost called Alfafile. I am downloading it from Alfafile because RapidGator makes you pay for their premium service to download a file this large (1.6 GB), but the speed is awful to say the least. Once I download it, I want to share it. Where could I upload this that it would be available to everyone without paying a premium price, a site we are allowed to link on here??
Success... at last!
I did download the correct stock ROM (including boot.img, recovery.img and system.img). It was found as XAR-T580UEU1APG1-20160905144918.zip located HERE. This is the correct stock ROM for this device.
Before trying any of these steps, make sure you have installed the latest Samsung drivers. It may take a few minutes during some of these steps for the drivers to install. If at any point during these steps Windows has a notification that it is installing drivers, stop and wait until the drivers are finished installing. I noticed that a "Gadget Serial" installed when I connected my tablet to Odin in Download Mode. If that happens it's fine, let the drivers install before moving forward. Also it should be noted that this was performed using a PC with Windows 7 Professional.
COME WITH ME ON MY JOURNEY TO FREEDOM!
1. Boot in stock recovery
Hold Volume Up button + Home button + Power button
-OR-
Power off, wait for battery charge screen to come up, the hold Volume Up button + Home button + Power button
2. Wipe data & Factory reset
Press the Volume Down button until wipe data/factory reset is selected (highlighted/colored), then press the Power button, on the following screen use the Volume Up button or Volume Down button to select Yes and then press the Power button, once your screen is back on the main screen where you started, continue to step 3
3. Boot to Download Mode from stock recovery (do not boot to Android OS)
Press and hold Volume Down button + Home button + Power button
4. Odin, prep for flash and connect tablet (latest version, v3.12 at the time of this posting)
Open Odin and click options, then uncheck Auto reboot, and finally plugin your the USB cable into your tablet and PC. Once Odin recognizes your tablet, the far left box under ID:COM will turn blue and the Log tab will say "Added!!"
5. Flash TWRP custom recovery (twrp-3.0.2-0-gtaxlwifi.img.tar)
Click the AP button and find where you saved the TWRP zip.
Once the box next to AP is checked, click Start, if successful the Log will say "Successful 1 / Fail 0".
If this was successful, move on to step 6. Note that you don't have to unplug your tablet from the PC, just close Odin.
6. Boot to TWRP recovery (do not boot to Android OS). This step can be a tricky one and requires good timing. It is important to do these steps quickly.
From Download Mode, press and hold the Volume Down button + Home button + Power button (the Download Mode combo) until the screen goes black, then immediately press and hold the Volume Up button + Home button + Power button (the Recovery mode combo). You must switch from the Download Mode button combo to the Recovery Mode button combo before the Galaxy Tab boot screen appears. If you're too slow, you will have to go back to flash the stock ROM back to the tablet and start back at step 1.
Once in Recovery Mode, swipe the bar at the bottom of the screen, tap mount, and verify that the box next to Data is checked. Once that is verified, you can flash the SuperSU (SR4-SuperSU-v2.78-SR4-20161115184928.zip).
If you had not already copied it to your tablet, you can do this now since Windows should recognize it and allow you to copy the zip file to the table. You can also copy it to the external SD card if you have one and flash from there.
Once you have the SuperSU on your tablet, tap install from the main TWRP screen and then find it (you may have to search the folders), tap on it, and then tap install. If you are wanting to flash Xposed (xposed-v87.1-sdk23-arm-custom-build-by-wanam-20161125.zip), or the boot image patcher (no-verity-no-encrypt_ashyx.zip), do not check the reboot box. Just swipe and flash SuperSU. Once done, go back and select the Xposed zip and flash. Once it is finished, go ahead and reboot, unless you also want to flash the boot image patcher to remove encryption. If you do, install, flash, and then reboot system.
NOTE: If you are going to flash all 3 (SuperSU, boot image patcher, and Xposed) do them in that order.
7. Confirm your work
Once Android is booted, check the SuperSu app and you'll verify you're rooted. Go ahead and reboot into TWRP recovery and you're Data partion is mounted and unencrypted. Now go ahead and install Xposed Installer (XposedInstaller_3.1.1.apk) and you're ready to download and use Xposed modules.
I followed these steps and have my Samsung Galaxy Tab A 10.1 (2016) (Model SM-T580NZWAXAR) rooted, unencrypted (data partition mounts in TWRP recovery), and Xposed framework installed flawlessly with no boot loops, no lost Data partition, no Encryption errors, and no hassel. All credit for the mentioned files and part of the steps to achieve this go to those that the credit is due. My contribtion is merely my journey and this 5 times tested, yes, I completely wiped and formatted my entire device and did this method 4 more times after I had success before writing this, to help others that might be frustrated for days as I was.
:victory:FREEDOM!!:victory:
Thanks for this, I'll be looking to root my tab after the holidays.....:fingers-crossed:
Hello!
Would someone be so kind and explain the following sentence to me:
tpsped said:
If you're too slow, you will have to go back to flash the stock ROM back to the tablet and start back at step 1.
Click to expand...
Click to collapse
Why should it be necessary to flash the whole ROM again?
I know that many ROMs reset the recovery to default, if TWRP hasn't patched the system, but then it should be enough to flash the custom recovery again.
DЯΦ[email protected]П said:
Hello!
Would someone be so kind and explain the following sentence to me:
Why should it be necessary to flash the whole ROM again?
I know that many ROMs reset the recovery to default, if TWRP hasn't patched the system, but then it should be enough to flash the custom recovery again.
Click to expand...
Click to collapse
When flashing the custom recovery, your Data will be unencrypted until you boot to Android OS.
In order to have an unencrypted Data partition, you have to follow these instructions in this order. If you are too slow and boot into the Android OS, you have missed the step and Data will become encrypted. Going back to Stock will once again reset the Data partition to unencrypted in order to properly make it permanently unencrypted.
Anyone unencrypted Data partition is needed in order to flash SuperSU, Xposed, the unencrypted method, or anything else in TWRP. The only exception may be flashing from external sd.
Anyone can correct me if I'm wrong, but I believe this should answer your question.
Wow thank you worked so well best of all guides
tpsped said:
Going back to Stock will once again reset the Data partition to unencrypted in order to properly make it permanently unencrypted.
Click to expand...
Click to collapse
To achieve this it is sufficient to format data partition in TWRP before flashing files, see https://forum.xda-developers.com/ga...ifi-galaxy-t3437666/post68154208#post68154208
ThemGo said:
To achieve this it is sufficient to format data partition in TWRP before flashing files, see https://forum.xda-developers.com/ga...ifi-galaxy-t3437666/post68154208#post68154208
Click to expand...
Click to collapse
Thanks for the info. I do welcome improvements to my instructions. I want to emphasize that these steps were the steps I took and that I figured out these steps on my own because there were no other instructions available that I could find. I'm always learning and growing!
tpsped said:
I'm always learning and growing!
Click to expand...
Click to collapse
Me too, I think everyone should :highfive:
Thank you for your guide, I like the clear steps.
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM (Eastern Time): I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
RyokoOnXDA said:
Phone: LG Aristo MS210 (Metro PCS)
Bootloader: TWRP 3.0.3.0
So let me explain. I was just figuring out how to root the LG Aristo since I had never done it with a custom ROM. Yes, true story. Anyway, I was happy I got it working perfectly until I rebooted my phone. When I rebooted it, SuperSU was gone. I tried going to the play store and redownloading it, but I got an error code -504, and the thing is, I couldn't download any apps. ANY. I decided to look the error code up and I can't find anything on it. I tried multiple times doing multiple different things. From factory resetting, reflashing SuperSU, to factory resetting and then flashing SuperSU, wiping dalvik-cache along with everything except for system. It didn't work and I thought I could get it working.. Well... this next part I really messed up on. I decided to wipe everything. I selected all options and slid the cursor and it failed. The wipe failed. It said "E: /sdcard1 unable to partition" or something like that. I noticed that when I was wiping earlier the internal storage was also called that, and the funny thing is I have no microSD card in my phone. So. :/
Now when I boot I'm stuck on the LG splash screen and nothing else happens. I tried recovery mode (without ADB) with the power button + vol down key as I read here: (I'd post link but I'm a new member) that's how you get into recovery/factory reset. I'd use ADB to get into recovery, but since I just wiped the system, I don't have USB debugging enabled. I tried anyway and I gotta say this is my worst nightmare as I'm too young to get a job, (15 yrs. old) so I can't get a phone. :/ Oh, and if this can be useful: I know it connects to my PC over USB because I hear the sound it makes when a new device is connected. Is there any way I can use that to unbrick it?
EDIT 9/10/2017 9:31 PM: I managed to get into twrp. I'm currently looking online for how to flash android 7.0 nougat (OS it originally had)
Click to expand...
Click to collapse
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Brandon Indar said:
Hi,
Well the only way to fix this is that u need to be able to boot into recovery.
If u tried booting into recovery by holding the power and vol+/- and u end up booting to the boot logo, then recovery is also wiped.
In this case, u will need to check if u have access to fastboot. If so then obtain the twrp recovery for ur device and flash it then tried booting into recovery using the appropriate keys.
When I get time, I will research ur device for any recovery tool and stuff.
Sent from my ONE A2005 using Tapatalk
Click to expand...
Click to collapse
I managed to get into recovery. I don't know how to flash Android 7.0 for my Aristo, though.. so I'm researching it.
EDIT: Got a ROM flashed. Everything working now.
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
Sent from my LGE LM-X220 using XDA Labs
The Ultimate Guide to Modding Your LG Optimus L7 II P710 or P713 | Root, Recovery, Kernel, Custom ROM and Unbricking
Before I start, let me tell you some things about this guide:
It is based SOLELY on my personal experience and has only been tested on my LG P713.
I am not responsible AT ALL if your device gets bricked, doesn't boot, catches fire, or runs away from you.
Please use this guide at your own risk, and take extreme caution if using a different phone than the one I used.
The only things this guide will show you are to 1. root your phone, 2. install CWM and then TWRP, 3. install a custom ROM and kernel, and 4. unbrick your device in an emergency.
There are probably better/easier ways of doing the things shown in this guide, but these are the methods I found easiest for a newbie like me.
Credits:
The developers of Root Genius
Chainfire, for SuperSU
weritos, for their excellent PAC-MAN custom ROM
riskey95, for their also excellent guide to installing CWM
neutrondev, for their fantastic build of TWRP and his guide to installing it
su_haris, for their great SKernel build
maxx_hr, for their guide to installing a KDZ ROM
androidego, for his guide to installing CWM
AntaresOneStudio, for their Quick Reboot App
With that out of the way, let's get started!
1. Rooting your phone
Download Root Genius from here: http://rootgenius.com/download/
When downloaded, make sure your Antivirus is OFF. This is because a root program can be used for wrongdoing, and as such, an AV will usually block it.
Enable USB debugging on your LG, and plug it in. When asked, make sure that you've enabled the RSA popup that might come up.
Root Genius will detect your phone, and ask you if you want to root it. Allow it to do this.
When it is done, unplug your phone and reboot it. Congratulations, you should now have root access!! If this is all you wanted from this guide, you can stop reading now.
2. Installing the CWM recovery
Download the recovery package from here: https://forum.xda-developers.com/showthread.php?t=2700579
Unzip everything to a folder on your PC.
Copy the GScript APK to your phone and install it.
Make a folder called gscript on your internal storage and move the boothack-cwm.sh file into it.
Copy everything else onto the root directory of your SD Card.
Run GScript and press the menu button on your phone. Add a new script and click on boothack-cwm.
Click on the script and your phone will now install CWM. Reboot your phone and follow the instructions
Now whenever you need to go into recovery, you can do it by going into GScript and running that file.
Congrats, now you have CWM installed! If that was all you wanted to do, you can leave now, but I highly recommend you follow at least the next part and install TWRP.
3. Installing the TWRP recovery
Go to this page (https://forum.xda-developers.com/op...ent/recovery-twrp-3-0-0-0-vee7-l7-ii-t3313792) and click on the 'old' button and download the file named TWRP_3.0.0.0_vee7_sdcard.zip.
Copy that file to the root directory of your SD card.
Download Quick Reboot from here: https://www.apkmirror.com/apk/antar...quick-reboot-root-1-3-2-android-apk-download/
Copy that file to wherever on your phone and install it.
Boot into CWM and install the TWRP file. Reboot.
Uninstall GScript. We will now use Quick Reboot in place of this.
If you want to check your recovery, or want to install a custom ROM, simply fire up Quick Reboot and boot into recovery.
Congratulations, you now have the TWRP recovery installed! If you want to install a custom ROM or kernel, go onto the next step, but if you don't, you can stop reading now.
4. Installing a custom ROM and/or kernel
Out of all the ROMs I have tried for this device, I have found that weritos' PAC-MAN ROM works the best, especially when coupled with the SKernel. You can use any ROM/Kernel with these steps, but those to are the ones I recommend. Your device might become bricked because of installing a different ROM or kernel. If so, see part 5.
Download the PAC-MAN ROM from here: https://forum.xda-developers.com/op...-pac-rom-lg-p715-dual-sim-lg-p713-lg-t2997798 I prefer the non-LED version, but you can download the other version if you wish.
Download the SKernel from this link: https://forum.xda-developers.com/showpost.php?p=60466694&postcount=339 The P710 version will still work on the P713.
Download the KitKat GApps from here: http://opengapps.org/ I recommend Pico.
IMPORTANT: Do a factory reset within TWRP prior to installing anything.
Install the ROM file first in TWRP, then the Kernel, then GApps.
Once that is all done, you can reboot your system. Since it is the first boot, it may take a bit longer than usual. This is normal, don't worry.
Depending on your personal tastes, feel free to replace/delete applications on your new ROM as you wish. The only tweaks I strongly recommend is replacing the default Open Camera with something else, as it is not in English, and installing SuperSU, as there is a bug in the default root management program. You can flash SuperSU through recovery using the file from here: https://download.chainfire.eu/696/supersu/
If everything has gone well, you have successfully installed everything you need to on your phone!! Congratulations!!!! You can stop reading now. If something has gone wrong, go onto the next part.
5. Unbricking your phone
Oh noes! Your phone doesn't boot! What to do?? Don't worry, it's fairly easy to get your phone back to a working state.
Find a stock ROM KDZ file for your exact phone/carrier combination. Even if your phone has been unlocked, you will need the file for your original carrier, in my case, Optus. Since there are so many variations of this phone and carrier, I can't link them all. Searching for 'LG [MODEL No.] [CARRIER] KDZ' will usually give you what you need. An example of this is 'LG P713 Optus KDZ'.
Download your stock ROM.
Download the LG Flash Tool 2014 from this link: http://www.mediafire.com/file/fwrcd3pdj0svjtb/LG+Flash+Tool+2014.zip
Put your phone in emergency mode by holding down the Volume Down and Power buttons at the same time, while simultaneously plugging in a USB cable. If you do this right, you will get a yellow screen with the words 'emergency mode !!'
Open up the LG Flash Tool. Set your phone type to '3GQCT' and mode to 'EMERGENCY'.
Press Normal Flash, then Start.
Press OK.
Wait a few minutes while it does its thing. When done, your phone will automatically reboot.
Depending on your phone and ROM, you might be stuck in a bootloop. To fix this, take out your battery to turn off your phone and put it back in. Press your Volume Down key, Home key and Power key until the LG logo comes. When the logo appears, let go of the power button but not the others. Depending on your new ROM, there might be an Android picture. You can let go of the buttons when this happens.
If you've followed everything exactly, your phone should now be unbricked!! It will be the same as a brand new P71x, so there will be no root or other such things. If you are feeling brave, you can repeat all the steps EXACTLY to reapply the mods.
Thank you for reading my guide! I hope it has been useful for you. Once again, thank you to the people that did all the hard work to make this tutorial possible.
If you have any questions or feedback, leave them in this thread, and I will do my best to help.
I don't own an Optimus myself (I use an LG K10 lol), but still I can vouch for this guide.