Related
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
demonoid phenomenom said:
did you try wipe dalvik and cache, maybe a factory reset prior flashing gapps, and then clean dalvik and cache would help , somewhere ive read that a X2 flash rom X2 flash gapps X2 wipes could do the trick
sent from the gray stuff inside my skull
Click to expand...
Click to collapse
tried it and didn't work
cherupop said:
So I installed Paranoid Android 2.9.9 from
http://forum.xda-developers.com/showthread.php?t=1765185
I installed the rom and also
Flash Bluesleep Fix:
Options Chooser
The roms starts withouth gapps , and using the option chooser wont install them ,
I dont know if it s because og my clockwork recovery version, I had a 5.0 something and reading I moved to a 6.0.15
when I run the gapps installation file Options_Chooser_JB_Version_4_Olympus gives me status 0 at the end
somtimes when I reboot the romm I get the signed (updating andrioid ) and the sign counts like its installing the apps, and in fact some of them get installed like the not google ones, but cant get to install the playstore or the gmail one.
the only thing that I want is to be able to get netflix to install it on my lcd, didnt know it was that difficult. any clue ?
Click to expand...
Click to collapse
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
sathelate said:
had the exact same issue ! >>>follow those steps and you will have a 100% workin Paranoid<<<
1st : do you try coming from another ROM ? Did you wipe/Fresh, or you are actually updating ?
2nd : th3bill actually are working to make the option chooser smaller since it is too big for our atrix system partition
3rd : just go to paranoid thread and see what ive done if you absolutely want that option chooser to work (NOT RECOMMENDED as it cause issues)
Workaround that really works no problem : go to recovery now that you have a fully working paranoid 2.9.9 that dont have any gapps and flash without wiping everything (that will NOT erase your app.. Just the ROM)
Reboot into Recovery
THEN :
Recovery>wipe CACHE partition
Recovery>advance>wipe dalvik cache (then go back)
Recovery>mounts&storage>format /system
Recovery>mounts&storage>format /preinstall (then go back)
Recovery>instal from sd card (external or internal, as you wish) and isntall Paranoid 2.9.9
>>>DONT REBOOT<<< at the end of aroma installer (uncheck the lil dot) then press finish (that will put you back in recovery)
back to recovery, go to advance again>fix permission
THEN,
Flash blusleep fix
flash Epinter's gapps (that will be FULLY compatible)
Let me know if you made it work
P.s.I had once, some issue with the playstore (i didnt wipe clean since 2.5.2) Force closing at the boot of the ROM and then, was unable to open at all !
If it happens on you, just go to system settings inside the rom>application>google playstore>erase Data>uninstall updates>reboot, it shoud do the trick
Plz, Hit the tanks button if i helped you
Click to expand...
Click to collapse
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
bluegrass55 said:
Thanks sathelate for this tutorial.
I've tried a number of times to install this ROM without success. The last time my power button stopped working.
Do I need to run the Aroma prep before install?
Click to expand...
Click to collapse
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
cherupop said:
It worked thanks for your tutorial, now I'm trying to run Netflix, you know off there is any setting to set, cause I open the app and close immediately, I'm not alter to even login or anything, just black screen and I get back to the menu, any clue on this?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
i think that root user cant use that app .. or at least JB users because i was having this problem since ive first flash paranoid :S (but i never tried before Cm10 Rom like on cm7/9)
I really want to make this to work, soo, let me know if you find anything on your side, and ill let you know on mine
I had the same problem, just installed gapps frontera Epinter and that's it. Check the post of the Paranoid ROM theres a user that post those gapps.
Hope you can solve it. I just did
Cheers!!!
Enviado desde mi Atrix 4G usando Tapatalk 2
sathelate said:
nah, you need to flash aroma prep only once if you didn't switch recovery
Ouch :S is your power button ok ?! :S
Flash romracer recovery wich you can use capacituve button (menu:down,Home:up,Back:back,Search:enter) (is you change recovery, you will need to flash aroma prep back, then restart recovery before flashing
Let me know
Click to expand...
Click to collapse
The power button behaviour has become very random and strange.
With the successful insatll of this rom I had to install "Button Remap apk" which set the search button to lock screen and longer press brings up the power button menu of reboot etc.
However with this rom the music player and the one I installed did not recognise a whole batch of a particular music file. So I went into recovery to restore a previous CM7 backup and hey presto the power button worked when selecting options. So I did the restore. The power button worked a couple of times then nothing. And the "Button Remap app" dosen't work in CM7.
I think the Aroma prep was the culprit.
Hello.
I want to instal parandroid on z ultra and i have some questions:
1) where can i found aospa/cm11 ZIP (from step 2 of instalation guid)
2) witch 4+ version is stable (nonbeta)
3) on z ultra have i the lateral bar with the home buton?
4) on this rom can move the app to sd, because on stock rom i can't(phone is rooted)
5) can i instal it on a full stock phone(only bootloader is unlocked, no recovery,no root), because i guess that the boot.img (from step 2 of instalation guid) is a kernel with recovery.
Thanck you.
Ps i tried to ask Beerbong or in his thread but i coudn't because i don't have 10 post.
1) In the CM11 thread
2) the boot.img is inside the CM zip
3) I don't understand
4) I don't know
5) Yes. You're right. That's why you have to flash the boot.img first, so you get Recovery
Sent from my C6833_GPe using Tapatalk
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
CHINEZU097 said:
In the z ultra parandroid post is a nexus 5 witch have the homebar(place where are the option; home and back comands) in the right side of The display.
Look At the second img from the parandroid thread
Click to expand...
Click to collapse
Oh, that's PIE and you can use that too if you want to.
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
The boot.img in the Paranoid Android zip is fine. Extract that and flash it using fastboot/FlashTool. You'll now have a recovery with which you can install the Paranoid Android system. Access the recovery by powering on the device, then holding Volume Up as soon as the LED turns green.
CHINEZU097 said:
I instal parandroid especialy for that option.
i don't find cm11.ZIP. I find only cm10. For 11 i find a link which link me to a sit where i can chose betwen more cm11 and i don't know which chose.
Click to expand...
Click to collapse
As above for thr boot.img
Carbon has PIE as well, but build 18 seems a little unstable
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
CHINEZU097 said:
One more question.
I read în s4 and nexus 5 parandroid threads and i saw the instructions in the next format:
Samsung
update to the last custom recovery
wipe data/factory reset
flash rom and gapps
wipe cache and dalvik
Nexus
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
At the z ultra they said that we need to instal rom and then to factory reset and then wipe data and dalvik.
Anyway. What make me suspicious is that factory reset after instal rom. I talk with somebody and he told me that i will brick my Phone if i will do that. So i want to do next instalation Guid:
1) flash a New ftf file(the last)
2) flash that boot.img( what i find in parandroid.ZIP)
3) factory reset.
4) wipe data(i saw that i can do it At the same time when info factory reset, because în twrp, At wipe option i can check all data(inclusive dalvik)
5) instal rom
6) instal gapps
7) do a again Point 4
8) flash su
9)it's done
Click to expand...
Click to collapse
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Problem with my phone also.....
Sent from my GT-S7392 using XDA Free mobile app
Tnx
blueether said:
1. update to latest FTF (757)
2. Copy ROM to external sdcard
3. Flash boot.img with flashtool or fastboot
4. Wipe /data and both caches (I have a feeling only /data is needed) (factory reset)
5. Flash ROM
6. Flash Gapps
7. su should be included so reboot
Click to expand...
Click to collapse
after flash gapps did i need to rewipe data and both caches?
CHINEZU097 said:
after flash gapps did i need to rewipe data and both caches?
Click to expand...
Click to collapse
I don't normally.
blueether said:
I don't normally.
Click to expand...
Click to collapse
HHHEEEELLLLPPPPP!!!!!!
i flashed the 757 ftf(all was ok)
i started the phone(all was ok)
i flashed the boot.img(all was ok)
i powered on the pfone, i entered in cwm(vol+)(all was ok)
i restarted the phone and i tried to enter in trwm(vol-)(all was bad) it dont entered.
i hard reseted(pred red button
i powered it on and it stay freeze at sony logo.
help mee!!!
if i reflash ftf file it will realive?
i have another file.img with dual recovey(file witch i used to root it). is it goot for what i need now?
i just test the phone in fastmode and flashmode and its ok, my flashtool see my device.
help somebody!!!
i am so scaried!!!
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
CHINEZU097 said:
thats fine. i make it. i flash the hamdogg kernel and it is ok.
my question is:
can i intal room with this kernel?
if i cant please send me a link with a good kernel.
Click to expand...
Click to collapse
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
blueether said:
Yes it should work.
Most custom ROMs only include cwm recovery.
It froze at the boot logo as the kernel and system were incompatible, if you had of rebooted (vol. up and power button) and entered cwm again you could have made a nandroid and then installed the ROM
Click to expand...
Click to collapse
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
CHINEZU097 said:
No. After first rebot it was compleatly frozen and i couldnt enter in recovery.
So if the kernel was incompatible, i think the kernel is for another version and i will ask on parandroid thread because it have no post ubtil 30 sept 2013.
Click to expand...
Click to collapse
the kernel was fine, it will boot any of the 4 variants
blueether said:
the kernel was fine, it will boot any of the 4 variants
Click to expand...
Click to collapse
Tnx, but i used jackyees kernel.
My actualy problem is with the sim. I cant acces the contacts( when i try to import from sim it dont fint them.) i checked my sim and its ok.
Hi, newbie here. I have trouble with wifi. My phone is Xperia P
I installed aospa rom, at the beginning everything was fine but few hours later I couldnt turn wifi on. I didint know what to do, so I just factory reset the phone. Same thing happened.
Then I installed Blur Line (CM 11) rom, same thing happened again.
On advanced setting it says Mac adress unavailable (idk if this is related with problem)
I searched google and xda for possible solutions.
solution 1 is installing sqlite editor and changing "wifi_display_on" value to 0
this didnt work because it was already 0
solution 2: settings/wi-fi/advanced/wi-fi region code
this didnt work too. I select Turkey (I live in Turkey) but whenever I exit settings and turn back none of the region is selected.
solution 3: copy WCNSS_qcom_wlan_factory_nv.bin file to somewhere
it is on motorola atrix hd thread, so idk if this can work for my phone too. I downloaded it but havent tried yet
Do you think it can work for my phone, or is there any "wifi fix file" for Xperia P
What sould I do now? Should I install another rom (slimkat, pacman, miui v5) or is there any solution for fixing wifi?
Thanks for replies.
Describe the steps you followed to install the ROM.
hliasant said:
Describe the steps you followed to install the ROM.
Click to expand...
Click to collapse
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Fenomenon said:
My phone was on stock rom, rooted and cwm installed.
First I unlock bootloader via flashtool, then I flash the boot.img via flashtool
I flash the rom and gapps with cwm (wipe cache, dalvik, factory reset) but then I flash the rom with twrp (wipe data, cache etc) again.
i dont know if I wipe some important data
formerly I installed some stock base roms via cwm, and I didnt wipe anything extra this time
I backuped TA partition before unlock bootloader. Is wifi work if I relock bootloader and flash stock rom & kernel
Click to expand...
Click to collapse
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
hliasant said:
Seems like some kernel modules are missing.
This is a sure method-procedure that I follow for flashing a new ROM on my and on my friends' XP.
1)flash stock JB firmware(ftf) using flashtool.
2)flash boot.img from the ROM you want to flash, using flashtool.
3)reboot in twrp using power button during boot up.
4)wipe data, cache, dalvik.
5)flash ROM + gapps and reboot.
Click to expand...
Click to collapse
thanks for help :good:
I install slimkat 8.8 and wifi works fine atm :laugh:
yea so I am running before in cyanogenmod 10.1 with jellybean and I downloaded Cyanogenmod 12.1 from rom manager. I also downloaded gapps downloader from playstore to find gapps there.
I flashed Cyanogenmod 12.1 successful. I installed Gapps successful, too
I am now running in android 5.1.1 but when the phone starts, ALL THE GOOGLE APPS I INSTALLED STOPS. Even in the startup, all the google applications forces closes and the apps is not installed. When I looked in the settings>apps>all
the google apps is there but it is in my sd, it also shows com.google......etc and it is not installed in my device.
The android Keyboard (AOSP) also closes again and again so I cannot type when the phone asks me to input password in my WIFI. SO I AM ****ING STUCK!!!!!!!!!!!!! ****ING STUCK
I wanted to try to flash it back to jellybean, but the Recovery my phone is running is the Cyanogenmod Recovery and there is no back up and restore option.
I want to fix this issue, I mean I still want to run my device on Lollipop. How can I fix this? How to make gapps work and the keyboard,
Take a backup of all your stuff in internal storage.
Download these files onto your SD card.
Kernel- https://www.androidfilehost.com/?fid=24407100847293132
TWRP- https://www.androidfilehost.com/?fid=24369303960684130
Download the proper Pico gapps from this thread.
After that,
1) Boot into recovery
2) Install the recovery
3) Reboot your device again into recovery. If it does not boot into TWRP recovery then it means you're on an older version of CM 12.1., so flash the kernel first, then the recovery, and try to reboot your device into recovery) If it booted into TWRP then you do not need to flash the kernel.
In TWRP, select 'Wipe', and do a factory reset, after that's done, select install in TWRP and flash Pico Gapps.
thanks for the reply!
but do you think this would work?
do you think the cm recovery would accept this zip files, because I tried to flash my backup applications such as games, and other stuff and it showed err signature verification failed.
Kevin3014 said:
Take a backup of all your stuff in internal storage.
Download these files onto your SD card.
Kernel- https://www.androidfilehost.com/?fid=24407100847293132
TWRP- https://www.androidfilehost.com/?fid=24369303960684130
Download the proper Pico gapps from this thread.
After that,
1) Boot into recovery
2) Install the recovery
3) Reboot your device again into recovery. If it does not boot into TWRP recovery then it means you're on an older version of CM 12.1., so flash the kernel first, then the recovery, and try to reboot your device into recovery) If it booted into TWRP then you do not need to flash the kernel.
In TWRP, select 'Wipe', and do a factory reset, after that's done, select install in TWRP and flash Pico Gapps.
Click to expand...
Click to collapse
Man, I have successfully done that.I have flashed TWRP recovery and flashed kernel.
But i cant install gapps..
I tried installing gapps for Android 4.2.1 and it worked AHAHAHAHAHA. But when I rebooted it, com.google...etc stil, all of the closes. (unfortunately com.google,etc. has stopped) even the AOSP the android keyboard isnt working.
I have some gapps working now, THE ONLY PROBLEM I HAVE NOW IS THAT THIS ****ASS AOSP KEYBOARD UNFORTUNATELY STOPPED MESSAGE EVERY 2 secs AND I CANT TYPE,
What error does it show when you try to install gapps?
And by gapps I mean the one for android 5.1.
Kevin3014 said:
What error does it show when you try to install gapps?
And by gapps I mean the one for android 5.1.
Click to expand...
Click to collapse
there is no error anymore. i installed 3rd party keyboard. thanks mate )
i mean the gapps are working but when I sync my google acc, it syncing error. they are working but after for about 5 mins or later, com.google.process.gapps unfortunately stops so i cant use it and more error stuff comes out. I think I am having issues with GApps, basically. how the hell i can fix this. I tried so many gapps from the xda thread, youtube, and other forums for 5.1.x. still, they unfortunately stop.
Take a backup of your stuff.
Download GApps (ARM/5.1/pico) from this link.
http://opengapps.org/
Copy paste the .zip file into your SD Card.
Boot into recovery (TWRP) and wipe /data, /cache, /dalvik cache
After that is done, install the open_gapps-arm-5.1-pico-xxxxxxxx.zip
Reboot your phone.
Now the unfortunately stopped error will be fixed.
that is what I have downloaded. I wiped data, cache and dalvik cache. and installed gapps
it says Insufficient storage space available in system partition. you may want to use a smaller Open GApps package or consider removing some apps using gapps-config.
NO changes were made to your device
Error Code: 70
E: Error executing updater binary in zip
Are you sure you used the pico version of gapps?
Kevin3014 said:
Are you sure you used the pico version of gapps?
Click to expand...
Click to collapse
yeahh.
what solutions can I do about this situation. I messed up :crying:
That's weird. Download Diskinfo from Playstore and post a screenshot of it. I'd like to know the space free in /system partition of your device.
Man, this is what I did
And yea, I figured it out.
1. Factory reset
2. Flash Rom
3. Flash Gapps
5. Wipe Cache / Dalvik Cache
6. Reboot
THANKS FOR SOME HELP!!!!!!!!!!!!!
Crazyevilbeef said:
Man, this is what I did
And yea, I figured it out.
1. Factory reset
2. Flash Rom
3. Flash Gapps
5. Wipe Cache / Dalvik Cache
6. Reboot
THANKS FOR SOME HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
Isn't that what I posted yesterday?
Kevin3014 said:
Isn't that what I posted yesterday?
Click to expand...
Click to collapse
I made a mistake. I forgot to put the 2nd step. it should be "Wipe system partition" and yea it worked.
Plz anybody help this out...
I unlocked bootloader, then immediately flashed Pitchblack recovery, then booted into recovery.
Initially console shows decrypted FBE device with default password. But Encryption status : Encryped
So I went into wipe & Formatted Data inorder to get rid of encryption. Then I rebooted recovery & it shows Unable to decrypt FBE device.
[UPDATE] (24/12/20) : The console output Unable to decrypt FBE device was nothing but to tell us that incompatible operating system flashed.
I flashed global version roms which are the main cause for bootloops. I flashed stock rom, then immediately worked out of the box.
1. Format data after going into twrp *It will wipe you device*
2. If you don't want to install a custom rom just mod MIUI, remove your lock screen password or flash orange fox and if it asks for password just put your lock screen password.
3. Else if you want to install a custom rom
Open recovery
Wipe data cache davilk
Flash rom
Format data
Reboot.
LoadOP2 said:
1. Format data after going into twrp *It will wipe you device*
2. If you don't want to install a custom rom just mod MIUI, remove your lock screen password or flash orange fox and if it asks for password just put your lock screen password.
3. Else if you want to install a custom rom
Open recovery
Wipe data cache davilk
Flash rom
Format data
Reboot.
Click to expand...
Click to collapse
Thnx for reply. I've tried Orange fox too. When I format data, internal storage doesn't decrypt. Also when I flash custom roms, they flash, but I'm gonna stuck in bootloop.
My main problem is that I can't decrypt storage. Phone boots only when I'm on MIUI stock. Am I missing something ?
That is odd but still flash fastboot rom and then flash twrp , flash a rom of your choice then format data . Maybe it will help . Btw which rom are you installing.
LoadOP2 said:
That is odd but still flash fastboot rom and then flash twrp , flash a rom of your choice then format data . Maybe it will help . Btw which rom are you installing.
Click to expand...
Click to collapse
Thnx for the reply. I'm trying to have lineage 17.1 & resurrection remix official build. I think rom's not the issue here. I need to know one thing.
To exactly say my issue, I can do flashing. But when I do & then reboot, Internal storage doesn't show the size & mtp doesn't work too, with bootloop issues along together.
There is no official LineageOS for the device.
kalehrl said:
There is no official LineageOS for the device.
Click to expand...
Click to collapse
Oh, I've mistaken, I was about to say resurrection remix official build & lineage unofficial one. Btw what do you think my device is going up to ? How can I decrypt & use internal storage successfully? I can't use internal storage when I flash a rom. Bcaz internal storage renders useless because of encryption.
Which recovery are you using?
Try flashing magisk 20 or 21.
Flash twrp by marounfurio( I am sorry if I slaughtered the name) which is available on xda.
And format data.
It's midnight here and I am going to sleep I will help to tommorow morning.
LoadOP2 said:
Which recovery are you using?
Try flashing magisk 20 or 21.
Click to expand...
Click to collapse
Right now I'm on Pitchblack beta latest build.
I tried magisk on MIUI stock through patched boot method, it worked, but no apps able to access root. I checked all magisk settings...
I think encrypted data partition is the whole culprit here. How can I decrypt it ?
MPK99 said:
Right now I'm on Pitchblack beta latest build.
I tried magisk on MIUI stock through patched boot method, it worked, but no apps able to access root. I checked all magisk settings...
Click to expand...
Click to collapse
And what about flashing magisk in twrp.
MPK99 said:
Right now I'm on Pitchblack beta latest build.
I tried magisk on MIUI stock through patched boot method, it worked, but no apps able to access root. I checked all magisk settings...
I think encrypted data partition is the whole culprit here. How can I decrypt it ?
Click to expand...
Click to collapse
Formatting data normally decrypts it . I don't know why something like this is happening here.
Follow my guide again maybe? Give it a shot step by step.
LoadOP2 said:
Formatting data normally decrypts it . I don't know why something like this is happening here.
Follow my guide again maybe? Give it a shot step by step.
Click to expand...
Click to collapse
Yah, I'm feeling weird too. Normally there are 3 ways to remove decryption...I tried all those.
1. Formatting Data by typing "yes"
2. Formatting data partition from f2fs to ext4
3. Installing Decrypt script v2 zip immediately after flashing stock rom.
I tried everything I could. I know all sorts of common flashing things. I caz I always used to try so many roms on my previous redmi's, but this one is special case.
I'd suggest you use LineageOS recovery. That's how I removed decryption.
kalehrl said:
I'd suggest you use LineageOS recovery. That's how I removed decryption.
Click to expand...
Click to collapse
Sure. Encryption is the whole culprit for me to say exactly. I'm trying to decrypt & flash builds. I'll notify if it works. Nice to get help from you guys.
Try this.
How to decrypt rom/storage so you can easily switch roms without format
First I would thankx to @sakhatlonda for koutiliy.zip
Steps to download file
1. Download koutility.zip from below.
2. Documentation related to koutility
Read from below link (recommended)
Just a utility zip which can be flashed on every rom flash, to do some pre-defined tasks.
Can be used either to copy everything you place in sdcard/sudeep/system_root to respective dirs or to set config and use that to do predefined tasks
This is how it works:
Flash in recovery, every option has Note with it
Available Configs:
brbootdtbo - auto backup/restore boot & dtbo, will do backup if no backup present and will do restore if backup is there
bbootonly - always backup boot
bdtboonly - always backup dtbo
resbootdtbo - always restore boot & dtbo (brbootdtbo won't work if this is enabled)
enalways - encrypt always (edauto won't work if this is enabled)
dealways - decrypt always (enalways & edauto won't work if this is enabled)
edauto - auto change encryption state on each flash
avb - removes avb flags (if decrypted)
quota - removes quota flag (if decrypted)
keep - doesn't over-writes boot/dtbo backups
debloat - removes bloats
rebloat - restore removed bloats
patchD - same as flash but set in config
productsize - makes a product image from your currently flashed rom to sdcard/sudeep and adds 600mb to it. So you can flash gapps etc. without error. (PC needed to flash product.img)
Steps to decrypt rom/storage
1. Flash roms
2. Flash koutility.zip tested on aosp only
3. Format data (required only first time after flashing koutility)
4. Reboot to recovery
5. Flash gapps (optional)
6. Boot into system
Congratulations your storage/rom is decrypted , you can switch roms without format
Next time when you want to switch roms
Steps
1. Wipe data,caches and dalvik caches
2. Flash rom
3. Flash koutility.zip
4. Reboot to recovery
5. Flash gapps (optional)
6. Boot into system
Notes
Remember you need to config koutility.zip in recovery
How to config koutility for decryption
Volume down (set config) > yes
After that "No" till 5th option
Then "yes" for 6th option
Rest "No" till 15th option
Last "yes" to flash
@LoadOP2 Thanx for providing KoUtil & its read me.
But I think we shouldn't reboot to recovery immediately after formatting the data. Because the stock rom will start it's initial encryption process by then & I won't get decrypted storage. Isn't it ?
I think this is the case that's happening to me. I always reboot recovery after formatting data, my storage will encrypt again because of stock rom's existence.
Yes you have to reboot to recovery. Otherwise you won't be able to use data partition.
LoadOP2 said:
Yes you have to reboot to recovery. Otherwise you won't be able to use data partition.
Click to expand...
Click to collapse
Yes, you're correct, we should do that. But can you read my 1st post in this thread. This is about that specific problem. I'm rebooting recovery after formatting data, then recovery shows Unable to decrypt FBE device
Send your recovery logs after formatting data.
LoadOP2 said:
Send your recovery logs after formatting data.
Click to expand...
Click to collapse
That would help. I'll attach screenshots too. Currently I'm on stock & being busy. I'll do this by today night & post logs & screenshots.