The Problem:
Phone stuck on LG logo screen with "Security Error" written underneath.
How I Got Here:
Rooted and installed recovery using apks found in these forums. I successfully restored a CWM backup zip found on these forums. Next, I decided to try flashing a ROM. SuperLuminal gave me a "Status 7" error, but when I checked over the thread, I realized that the P769 was not specifically mentioned as a compatible device. So, I decided to give PACman ROM a try, but got the same error.
I googled "status 7 error" and found a guide for fixing this (removing "assert" line in updater-script line). I was aware of the danger in doing this, but since PACman ROM stated "P769" right there in the title, I gave it a shot. Now I'm stuck with the "security error" screen.
What I tried:
I could no longer get into recovery, so I thought restoring it might be a good idea. I tried to use fastboot using the method described in this thread (http://forum.xda-developers.com/showthread.php?t=2310569). However, I quickly realized that I didn't know how to put the phone into a "download mode" like most other phones I've worked with.
I then tried B2CAPP, but phone couldn't be detected. Went and learned how to get into s/w upgrade mode, ran recovery and got an error message saying "updating is not possible any longer due to a fatal error..."
Next, I tried uninstalling all LG software and rebooting PC. Installed LG PC Suite found here (http://en.kioskea.net/download/download-19186-lg-pc-suite), allowed the program to update to latest version. Then tried to run Emergency Firmware Recovery, which opened a window asking if I want to run LG Mobile Support Tool. I clicked OK and was taken to an app that looked exactly like B2CAPP and gave me the same error as above.
So in conclusion, I can only access two screens: the LG logo security error screen and the s/w upgrade screen. Neither appears to give me access to fastboot/adb nor to LG's recovery tools. Am I permanently bricked or is there a way out of this mess? I've been searching these forums extensively and have tried every method I could find. I'm out of options, so I'm kinda freakin out here. Can anyone please help me figure out what else to try?
You did some studying for sure, but you needed to do some more before jumping in.
1. http://forum.xda-developers.com/showthread.php?p=41768774
2. http://forum.xda-developers.com/showpost.php?p=43210006&postcount=15
3. http://forum.xda-developers.com/showthread.php?p=43642515
Please read each thread before starting and read the instructions txt found in Lelus fastboot zip
Sent from my LGMS769 using xda app-developers app
Kuma82, I can't thank you enough for your helpful response.
Here's a shortened version of what I did, in case someone out there finds themselves in a tough spot like I was in:
1. Installed OMAP drivers using method described in link above (right-click on device in Device Manager, manually install driver, etc.). Fastboot worked after this
2. Using Lelus' Fastboot, flashed option 6 (load JB xloader and uboot). This gave me an inverted purple LG logo that still said "security error"
3. I think tried to use fastboot to flash the p4_769.img recovery file. No change. Loading up s/w upgrade mode and the LG Mobile support tool (B2CAPP) was no use (stuck at 15%, no connection to phone).
4. Once again, using one of the links above, I downloaded 3 .img files and proceeded to erase uboot, boot and recovery and flashed those .img files instead. When I rebooted the phone, I got the regular LG logo for a second, then a white flash and then a smaller LG logo with "security error"
5. Now, I installed the LG United mobile driver, went into s/w upgrade mode again and ran the Mobile tool. Got the "updating is not possible..." error again
6. Searched for the offline flash fix method and followed it step-by-step, word-for-word. Phone works again!
I'm pretty sure I could have just done steps 1, 4 and 6 and achieved the same result.
Hope this helps someone, and thanks again Kuma82!
I've had this happen to me twice and was able to get out of it really easily. Basically, I just have my desktop set up for offline flashing and my laptop for online. Just popped into S/W update mode and plugged it into the laptop, started the b2c app, clicked on the "recovery phone" option, and went for a snack. Fixed when I came back.
No problem, glad I could help.
Now that you know how to use fastboot, you are pretty much ready for everything.
It took me a couple of tries to get it running.
Use the new root method, http://forum.xda-developers.com/showthread.php?t=2338816
If you plan on staying on stock, get the cwm for locked bootloader, but first get this busy box http://forum.xda-developers.com/showpost.php?p=43395803&postcount=260
Then this cwm
http://forum.xda-developers.com/showpost.php?p=41613095&postcount=220
Sent from my LG-P769 using xda app-developers app
kuma82 said:
You did some studying for sure, but you needed to do some more before jumping in.
1. http://forum.xda-developers.com/showthread.php?p=41768774
2. http://forum.xda-developers.com/showpost.php?p=43210006&postcount=15
3. http://forum.xda-developers.com/showthread.php?p=43642515
Please read each thread before starting and read the instructions txt found in Lelus fastboot zip
Sent from my LGMS769 using xda app-developers app
Click to expand...
Click to collapse
Dear, Kuma82!
Thank you very much fot your instruction! It really saves my LGP768 from "security error"! I follow 3 steps and it works, GREAT!
Thank you again and this forum too!
Please help! Bricked LGMS769 (P769)
Solved. The LGMobile Support Tool needed to run on a different computer. It worked when I put the phone into SW Update Mode (press up volume key and plug in USB) and then ran the LGMobile Support Tool.
By the way, this is how I got the phone recovered after it was booting to the small LG logo with the "security error" message as mentioned in Step 4 above.
Hi all,
I recently got a new Dell Venue 7 3740 (yeah, not my first choice, but it was free for buying a computer). Anyway, started reading up on how to root the thing. I have a couple of apps that require root.
I found this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
and also the main Dell page: http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/
Following Dell's guide to rooting appears to NOT root it. Installing Root Checker confirms I don't have root. Unbricked it and got it back up from 4.4.2 to 4.4.4. By reading the first guide for the 3840, my question is ...
Is the boot image linked there compatible with my 3740?
(yeah, I know this should be in the developer section ... unfortunately I don't have enough posts ... also, I am familiar with rooting/flashing/etc, my first device that I put CM7 on was the original Galaxy S1 ... and I have CM10 on my S3.)
Tried, failed
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
reaper-death said:
Yeah I got this tablet with a PC too and tried rooting. It FUBAR'd on me and I had to wrestle with unbricking it. Which sorry to say is a job and a half, the images on Dell's site are corrupt for this WiFi only version (no partition.tbl file, system image incomplete). Ending up downloading the LTE versions firmware to get the missing files and rewriting the batch as the file names for the fastboot commands were wrong too. And even then the tablet wouldn't boot, so I had to store the OTA on an SD card and use recovery to flash it. Unfortunately that leaves me with 4.4.2 and the dreaded clock and browser issues. And OTA doesn't work, it keeps saying no updates are available. Spoke with a Dell rep who said OTAs were suspended and to try again in a week but I think OTA was broken for me when I tried rooting and boot loader was unlocked (which the PDF on Dell's site warns you about).
So now I have a working tablet that skips hours ahead and has general stability issues.
Click to expand...
Click to collapse
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
ProfM2 said:
Hmm ... Interestingly enough, I ran through the unbrick procedure from Dell, and didn't have any issues with it whatsoever. I'm not sure if they updated the TGZ since you updated.
I have read that root is for ADB to start with. Can anyone confirm this? If so, then which package could I get for a superuser binary?
Click to expand...
Click to collapse
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Following the root process initially worked and the temp cwm recovery let me flash the supersu update. It booted with su just fine and I tried a couple apps that needed root and they worked. Once I rebooted again the tablet showed up with a USB icon and would go no further. Never having dealt with Intel SoC drivers it took me a while to get them installed properly, and then I eventually understood what "full power off" meant lol.
Do you know how I can relock the bootloader and get OTA working again, assuming I'm already on 4.4.2 from the OTA zip installed via recovery?
Thanks.
Click to expand...
Click to collapse
You better redo the unbrick procces cause as you are now, you won't be able to update your tablet and 4.4.2 has some issues with the clock and browser. The best way to root is by thetered cwm, I did it and it's working great.
reaper-death said:
I did this process just a couple days ago so everything I pulled from opensource.dell was current. The unbrick tgz on the site shows up as 128mb for the wifi only A1195 and the A5195 shows as 821mb (odd). When I extracted the tgz it said "unexpected end" or something like that on the system image. Then again when I extracted from that extracted tgz.
Click to expand...
Click to collapse
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
ProfM2 said:
This is quite odd. From the documentation, it appears that the A195 is for the LTE version, and the A150 is Wifi only. Since I have the 3740 Wifi only, I only pulled the A150 version.
The Unbricking process was very straightforward and everything went smoothly, and after it rebooted, it prompted that there was a system update from Dell, and that took me from the 4.4.2 from the TGZ, to 4.4.4
Click to expand...
Click to collapse
http://opensource.dell.com/releases/Venue_7_3740_Merrifield/developer-edition/Doc/OSS_A150&A195.pdf
* For Wifi-only device on A150 and Wifi / LTE device on A195
I see it now, I think I was misinterpreting the above statement which means I've been flashing the A195 rom this whole time. Thank you all for your help! :good:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
ProfM2 said:
After getting my 3740 back to "Unbricked" mode, and OTA upgraded to 4.4.4, it appears that I'm completely locked out of the rooting process.
I've tried to start over with the Dell info (unlocking bootloader), however, neither of my PC's will detect the tablet when using xFSTK (one PC - Win8.1-64bit, other XP-32bit). The tablet IS detected, however, it appears that the drivers are no longer correct(?).
I normally run Ubuntu, and thats where my Android development setup is on ... I see that xFSTK is available for Linux ... has anyone used it? or would I be better trying to fight Windows?
Click to expand...
Click to collapse
It is mentioned somewhere that the 3740 and the 3840 use the same firmware. Assuming that, what you can do is download the latest SuperUser zip, copy it to the internal or external storage, then use THIS, or THIS to root through CWM.
graphdarnell said:
It is mentioned somewhere that the 3740 and the 3840 use the same firmware.
Click to expand...
Click to collapse
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
ProfM2 said:
Hmmm ... I took this to mean that I could use the same boot.img as the Venue 8, and tried the process from this thread: http://forum.xda-developers.com/dell-venue/development/guide-how-to-root-android-4-4-4-dell-t2918427
NOPE. (Don't try, it'll cause the tablet to go into the "help my androids' fallen and can't get up" icon. )
Click to expand...
Click to collapse
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
graphdarnell said:
I'm curious as to what it is you're trying to do. Why do you insist on having a developer's root (just the use of ADB shell), as opposed to full root flashing SuperSu from custom recovery?
Click to expand...
Click to collapse
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
ProfM2 said:
I just want full root.
Most of the info that I've read on here and elsewhere are geared to the 3830/3840. Not as much for the 3740. So, by playing with the device and learning what works/doesn't work, possibly others may find this info useful to them.
I've been having issues seeing the device from XP, Win8.1 and Ubuntu, in the 'off' state of the tablet, when the PC should be seeing the merrifield. Just this morning, after bricking it last night, I discovered that my PC seems to see the device right away if I press Vol+ while plugging in the microUSB. (again, something that may help someone else) I was planning on double checking this info later today, to make sure that it wasn't a fluke.
I do appreciate both of the links that you've posted in this thread, and I will check them out. Of course, both are labelled for the Venue 8, not the Venue 7 that I have. Since I've gained knowledge on the unbrick process I feel more comfortable trying them.
I've installed (or tried to install) SuperSU from the Play store, but it didn't appear to help much, since I didn't have the custom recovery setup at that time. I'll work on that tonight.
Click to expand...
Click to collapse
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
reaper-death said:
A quick word on getting the device recognized in off mode, what worked for me was it needs to be completely powered off and nothing showing on the tablet screen then connect and bring up the device manager. Whatever shows up needs to be "Intel SoC" so change the driver to that if needed. When flashing firmware to unlock the bootloader the device's boot screen will show an "Intel Inside" logo instead of the normal "Dell" logo. I ended up running xFSTK commands in advance (they'll wait) and then running over to hook up the tablet (powered off) via USB as for some reason it'll show up and then I hear "da-Dunk" in Windows (device disconnected) after a short while which interrupts the process (same with fastboot commands). This was the unbrick process in a nutshell for me and I'm leaving it now as is (OTA'd to 4.4.4) until hopefully the supposed update to Lollipop comes around and maybe some progress is made on rooting it.
Hope this helps you!
Click to expand...
Click to collapse
I have finally settled down and got the tablet rooted. What's really odd, was Win8.1 kept losing the proper driver. I'm not sure exactly why ... but suffice it to say, I got it working. It did appear to be more stable when I hit the Vol+ and plugged in the USB, but then again it may have been a coincidence.
Open source dell
If you follow the link to dell open source, they do have a detailed PDF download for unlocking the boot loader etc. The file was too large for me to upload on XDA. I just found it today while I was researching how to root this tablet. I have not had a chance to try it yet.
http://opensource.dell.com/
That doesnt work for 3740 lte. I;ve done everything that was in PDF. OTA image should be with unlocker bootloader and root but its not. ;/
Its adb root not su big difference
Does anyone have any idea to root dell venue 7 3740 lte
The open source is for venue 7 3740 wifi
how can i hard reset this device please tell me.
Mahisasur said:
how can i hard reset this device please tell me.
Click to expand...
Click to collapse
Reset any android tbalet with ...
Setting >>>>> Backup & Reset >>>>> Factory Data Reset >>>>> Reset Tablet >>> Erase Everything
I'll try to get as straight tot he point as possible.
Been using my Mobile one touch pix 7 for a little over a year and always installed Ota updates. Well I rooted the tablet not too long ago, forgot which method I used, but was working fine.
an Ota update came through and totally forgot it was rooted, and tried to install it, at which point the whole tablet got bricked.
It ended up in recovery, and I selected due to failure, to format and wipe the data.
Anyhow, The unit will stay at the boot screen for a while then show command error and then show the recovery screen, my only options are:
reboot
update from sd card
update via adb
update via memory
reboot Bootloader
power off
Well I've tried updating by downloading system images via adb, they return a verification error.
I've tried using adb side load to try to install an Ota update file I found for it, returns a verification error.
I cannot get into download mode, fast boot mode I think does not work as windows reports 3 android devices, but the mobile update software cannot see anything, and fast boot gets stuck at waiting for devices.
I suspect the tablet is for lack of a better description totally bricked and just a paperweight.
I am at a loss of what to try from this point. I'm sure wiping the data after the failed update killed it completely but not sure.
Anyone have any guidance here? I've downloaded a few images from the web I found that say they are for this tablet model, but still getting verification error.
Is there any flashing software I can get that may be able to access the tablet or can I copy a file to the scared and have it try to run an update from there. I don't care if it is rooted or not, just want to get it usable again.
I can run Mac OS, windows 10, windows 7, windows xp, or even have no issue getting a linux version going, whatever will work best for this I can use it. windows 10 I was able to manually add the drivers but windows 7 is not letting me do it the same way. I can connect via adb sideload only, no other adb functions seem to work.
I'm not a total news when it comes to custom rooms, as I have done it with another tablet, and an android car radio, but those were pretty straight forward and bootable so never ran into a brick issue yet.
I have a feeling this is toast and I hope that is not the case.
If anyone here can help out, I would appreciate it.
Thanks again....
Need help here to. Been searching with no luck. Any my issue is.
Rooted kingroot, flashed twrp with flashify and now I'm stuck on twrp. Been searching for any custom stock rom. I forgot to unlock the bootloader but I did enable usb debugging (i didn't see any oem options).
Any k 28532Jonsunf of help would be greatly appreciated.
This sorta happen to me. I rooted pixi 7 with kingroot, and was able to delete a lot of bloatware. However, when I was using lucky patcher it pretty much messed up the play store. But it was fine. I could download stuff through the Internet. But sooner or later I needed to fix it. Tryed a lot of ways but it didn't help. So I factory reset the tabletand now im stuck at the Setup Wizard. It just won't let me let me through. I thought its was over, but then I get a message saying there is an update available. So I download it and installed it. But all I get at the end is error. So now I need to flash it with stock. I tried the img. too, but it doesnt show up in the recover menu. If you found a solution please tell me
Can anyoonneee help me find a good Custom Rom for the alcatel one touch pixi 7 (9006W)? Sucks that there's not much info for this device (probably cause the device sucks lol) I'm running on lollipop 5.0.2 and am not able to get OTA update due to rooting. Unrooting didn't help. It seems only answer is custom rom but don't want to risk bricking it as I don't have a computer at home. Also, I am new to this so if anyone can share some insight, I'd be eternally grateful
P.s
It's a t mobile device but I only use it on wifi.
Am using kingroot.
Have never installed a custom rom
****ing device is 8 gigs. 1 gig Ram.
Is it possible to get Nougat?
Help meeee lol