help please - Galaxy Ace S5830i Q&A, Help & Troubleshooting

hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh

more likely hardware problem...my ace got wet.. [only the USB port] and after that,my PC won't recognize it anymore... Miraculously after 7-8 days, I got it working again.. some said blowing a compressed air into the port may help..IDK

Related

Help !!!!!! Nothing Shows Up On My Galaxy Y Even when it boots up

Whenever i start my samsung galaxy y s5360 screen appears completely white like a flashlight, but the phone is working i can recieve callls on my phone but cannot see anything on my device. even in dwnld mode & recovery mode the same problem persits, i cannot see anything . pls help me ????
I have installed custom creed v2.0 rom on my android device. Recently i have replaced motherboard of my device. Under Warranty.
I Want To Flash stock rom on my device but i cannot see anything on my device so i am unable to flash my device.
Another problem is that when i enter download mode odin detects my device but when i try to flash the rom it says unable to open com port
Please Help Me !!!!!!!!!!!!!
At Present my device is working properly but when i restart my device the problem returns !!!!!!
Ok try this solution.Download any Custom ROM, use your PDA or if worked the USB mount with cable use your computer.When you finished, download from market CWM program and flash the file.Another solution download the new USB drivers and install.One more solution check the port numbers or irq and change some hardware to a different port or irq
Tapatalk 2 sent from GT-I9000

Unable to connect with USB

Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
DroidHackz said:
Hello everybody,
I know there are thousands of threads like this, but none of them gives me a solution. If I try to connect my SG2 (Stock ROM) with an USB cable, I get a really annoying message all the time. (Screenshot: http://www.techiesguide.com/wp-content/uploads/2011/10/USB-device-not-recognized-1.gif) It's still charging. When I try to install the drivers, I get an error message too. It tries to install drivers through Windows Updates, which doesn't work. Maybe Samsung's old drivers will work... Does someone have them?
My USB port just work. I can use everything else with it. The cable also works, and I've tried several cables. USB Debugging is enabled on my phone.
Things I already tried:
-Install drivers through download mode
-Cleaning up the USB port
-Different USB ports and cables
-Reinstalling drivers/Samsung Kies
-Removing the battery
-Install drivers w/o SIM and SD card
-Manually install drivers
-Soft factory reset
-Samsung Kies' troubleshooting
-USB Mass Storage
I hope somebody knows a solution for this.
Thanks in advance,
DroidHackz
Click to expand...
Click to collapse
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
sadekmefti said:
Same problem for me, I think my Micro USB Port is broken (I'm pretty sure). Just replace it for ~10$ and you'll be fine
Click to expand...
Click to collapse
Okay, I'll use another device, and if that one works I can confirm you're right and find a solution for it.
EDIT: You're right. Where can I get one?
Help need ASAP...
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Post above mine; 'Odin won't work' gets covered here all the time. Search.
Solved
Saravanashines said:
Yes..i also facing the same problem. I'm using Sentinel Rom with siyah kernel, my phone is not booting up it..shows a battery charging icon that's charging. i have tried all the possibilities that mentioned above , but no use..its says usb not recognized and also not able to go to Recovery mode or Download Mode using the hardware keys..but USB jig works , i was able to go to download mode but PC doesn't detect it odin. So not able to flash the kernel\ROM...
The phone was working till last moment , but when i restarted this problem came.
Can anyone suggest a solution..?
Click to expand...
Click to collapse
SOLVED :
Ok..i found whats the problem..the problem with my micro usb port ,which was not detecting. I connected my phone with different USB in my home PC and it detected , i went to Download mode using USB jig and flashed with new rom and its fixed. Thanks for the Help. I still have problem in my phone , if i connect my phone to any pc, phone gets rebooted. Hope i will find a solution for it.
:victory:

help please !!!

hi, this is my probleme that i didnt
fix it yet even when i when port it
to a pro
ok this is it
i have 3 SGAce hhhh
one of them work normaly
the 2nd not detected by pc/odin in
nrml mod XD , recovery and
downloade mode but it works fine
but when i tray to change usb
mode by pressing *#7284# i got a
popup with black BG see ss on
attachment
finaly the third that when i tern it
on nothing hapen it stuck at pre-
bootanimations screen also i cant
enter the recovery only download
mode but it cant be detected
by Pc or odin
so please give me a solution for
the 2nd 3rd
not like
chek usb cable port or usb driver
try to unplug the battrey reinstall
driver use other odin version
becouse i try it
95645986688489075 million time
hhhhhhhh
Try with any other pc & make a sure u have entered in Odin download mod
Sent from my HM 1SW using XDA Premium 4 mobile app

Stuck with cyanogenmod (Bricked Rom)

Hi everyone, It's been 2 days I'm trying to unbrick (if I can call like this) my i9100m s2 I almost tried everything...
My Usb charging port is working but is not sync anything at all , on windows it say usb port not recognized , I tried my wire usb with other phone and all other phone they work perfectly into download mode, and otg mode transfer file work too...
( I tried to clean the usb port on my i9100m also nothing, I ordered a new board USB charging dock ( v2.1 on ebay ) to be sure because i think my dock usb port charging is defect (maybe ?) and i will received it this week i hope or else i have another cell phone exactly the same i can retake to my friend soon i hope too)
But for now I lost Root Permission now I cannot do nothing without this, and I lost my Recovery mode I dont know why
And I am with the roms Cyanogenmod 12 nightly the 24 dec. build with lollipop.
Some one have idea how I can re-get Root Permissions before i get the next week maybe the new usb port charging board ? I tried framaroot , towelroot, terminal emulator ...
P.S. : I cannot use USB and recovery mode (Recovery mode make appear logo at the logo boot and black screen and re-appearing logo and after the OS.)
( and Odin work but i cannot use usb port (defect) )
Thanks in advance !

[Q] Stuck in bootloop on my Leagoo Lead 1

Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
otd leagoo lead1 sm619b v0.9.2_S1202
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
https://drive.google.com/file/d/0BwtGwuP0GdfBZzh3a2NCWVZ3RVU/edit?pli=1
r0c0 said:
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
Click to expand...
Click to collapse
i will try but now i got another problem so i cant turn off my phone with usb cable plug in , i can see batery logo or i just turn it on * unlycky me but for half sec when phone was plug in with meadiatek preloader i saw it working for 1 secunde u can see on my printscreen
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
r0c0 said:
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
Click to expand...
Click to collapse
Yeah i try today and after some time i did it , i use official rom from web site , all file load dormat etc , then green cirle "OK" i unplug phone from usb and turn it on but i saw that logo "LEAGOO" was flickring and then top half display of mobile was Yellow and bottom was white/black thats maybe worst then before i emailing with seller too but i dont think he could help me
and after that with another try i waned use different rom i got this pic down .. so again im on connect disconect phone
after 10+ try i connect it again and trying another rom hope this will work :silly:
1st edit: add img after ok flash
2nd edit k phone after turn on is yellow at top and at bottom white black
should i use download only or try format all+ download
3th: i upload img of phone after start so u can see
its to bad that ppl from etotalk dont know how to deal with it too
i got the same problem
i was flashing lead 1 firmware on lead 1i
lead 1i is the latest so download right firmware..

Categories

Resources