Hi , so i buy leagoo lead 1 from Etotalk they send me phone and everything was ok , but after 2 weeks i got OTA update which i download and click on apply , phone restart and start again instaling new update (i was like ok everything is good )but at middle of this update it give me Error Android icon with red color ,
and after that i can just start phone again and see just boot menu with :
otd leagoo lead1 sm619b v0.9.2_S1202
Normal Boot
Update via ADC
Update from sdcart
update from cashe
wipe cashe
wipe data (factory reset)
....(this one last i dont rememeber)
I tried wipe all and restart again but that did not help me much ..
ok so i download SP-flashtool from Leagoo web site instal all driver for usb and download Original rom from theyr site too .
what i did is i start program like admin. then i click on Option->be sure that Usb mode is enable then again Option -> DA Download All-> and enable Hight speed , after that i click on Scatter -loading and from the folder with Rom i sellect "MT6582_Android_scatter.txt"click on Firmware ->Upgrade and plug my phone which is turn off . in program i can see that he fount it but after 2 hour it is still at 0% how u can see on image i attach to this with some txt record from program with errors
So could anybody tell me what should i do now ?
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
https://drive.google.com/file/d/0BwtGwuP0GdfBZzh3a2NCWVZ3RVU/edit?pli=1
r0c0 said:
try different (and newer) sp flashtool:
SP_Flash_Tool_v5.1348.00
Click to expand...
Click to collapse
i will try but now i got another problem so i cant turn off my phone with usb cable plug in , i can see batery logo or i just turn it on * unlycky me but for half sec when phone was plug in with meadiatek preloader i saw it working for 1 secunde u can see on my printscreen
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
r0c0 said:
you need to plug in a usb cable and really fast press download button in flash tool, this helps with BROM errors. otherwise you could try googling the error or just contact leagoo.
Click to expand...
Click to collapse
Yeah i try today and after some time i did it , i use official rom from web site , all file load dormat etc , then green cirle "OK" i unplug phone from usb and turn it on but i saw that logo "LEAGOO" was flickring and then top half display of mobile was Yellow and bottom was white/black thats maybe worst then before i emailing with seller too but i dont think he could help me
and after that with another try i waned use different rom i got this pic down .. so again im on connect disconect phone
after 10+ try i connect it again and trying another rom hope this will work :silly:
1st edit: add img after ok flash
2nd edit k phone after turn on is yellow at top and at bottom white black
should i use download only or try format all+ download
3th: i upload img of phone after start so u can see
its to bad that ppl from etotalk dont know how to deal with it too
i got the same problem
i was flashing lead 1 firmware on lead 1i
lead 1i is the latest so download right firmware..
Related
Hello
I have an Lenovo s898t+ from aliexpress. with androdi 4.4.2 And I was trying to increase my file system root partition in phone. I use apk meteos MTK 6592, and after getting to recovery mode I did everithing like was write in other forumm that I found set factory restart. And now my phone is in something lie bootloop always showing android figure and when I try to turn it off only show
forrmating /data...
mount system/ error
and can`t get to recovery mode or if I try to connect to PC via USB without the batery inside the phone is still rebooting. I know how to flash stock rom, but cant do that becouse the phone is still connecting and disconnecting to PC.
Can somebody help please I have been searching for 4 days with no luck.
Thanks for all you answers
If your phone is a MTK device..
U can flash a new rom..
With SPflash tools..
abhinavp649 said:
If your phone is a MTK device..
U can flash a new rom..
With SPflash tools..
Click to expand...
Click to collapse
Cant get phone to stable connection to PC always reseting without battery and with baterry the bootloop shows up and did not connect to pc
u have to start the download process from SPtools before connecting your phone to PC
hopefully, it will show your phone..
some phones have a trigger to start the download..may be power button or any of volume buttons..
Some phone also required to pop in the battery to start the process..
Try any of these options..
hopefully, u will have ur phone flased with a new rom..
ingshibbby said:
Cant get phone to stable connection to PC always reseting without battery and with baterry the bootloop shows up and did not connect to pc
Click to expand...
Click to collapse
u have to start the download process from SPtools before connecting your phone to PC
hopefully, it will show your phone..
some phones have a trigger to start the download..may be power button or any of volume buttons..
Some phone also required to pop in the battery to start the process..
Try any of these options..
hopefully, u will have ur phone flased with a new rom..
Hi Guys,
My sister's MMX A116 is totally bricked and not even able to turn it on. Earlier It was stuck in bootloop and she gave it to some mobile repairing shop and they hard bricked it . I can't even boot to recovery. Is there any chance of unbricking it? If yes, please tell how.
MrJukeHardbane said:
Hi Guys,
My sister's MMX A116 is totally bricked and not even able to turn it on. Earlier It was stuck in bootloop and she gave it to some mobile repairing shop and they hard bricked it . I can't even boot to recovery. Is there any chance of unbricking it? If yes, please tell how.
Click to expand...
Click to collapse
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
When I click the download button and connect USB, nothing is happening. It just get stuck to 0%
MrJukeHardbane said:
When I click the download button and connect USB, nothing is happening. It just get stuck to 0%
Click to expand...
Click to collapse
check if your phone connects with the usb port or not?
because this can happen if your phone drivers are not installed or wrong drivers installed
visit micromax website and download drivers for a116 from there first remove old one and install new one then try again.
HIT THANKS IF I HELPED YOU......
ndbhatt2006 said:
check if your phone connects with the usb port or not?
because this can happen if your phone drivers are not installed or wrong drivers installed
visit micromax website and download drivers for a116 from there first remove old one and install new one then try again.
HIT THANKS IF I HELPED YOU......
Click to expand...
Click to collapse
Phone is now detecting but i am not able to flash from SP tools, getting Error : BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069). Haven't found any fix for this error yet.
MrJukeHardbane said:
Phone is now detecting but i am not able to flash from SP tools, getting Error : BROM ERROR : S_DL_PMT_ERR_NO_SPACE (5069). Haven't found any fix for this error yet.
Click to expand...
Click to collapse
If your EMMC chip or RAM is damaged by Mobile repairing person then you will be helpless...
but if it is ok then once again try, this time in SP Flash tool select option "Format All + Download" then click on download button
remember never connect phone before the above steps only connect phone after u click on Download button
ndbhatt2006 said:
If your EMMC chip or RAM is damaged by Mobile repairing person then you will be helpless...
but if it is ok then once again try, this time in SP Flash tool select option "Format All + Download" then click on download button
remember never connect phone before the above steps only connect phone after u click on Download button
Click to expand...
Click to collapse
Where is this option Format all + download?
MrJukeHardbane said:
Where is this option Format all + download?[/Qwhi
which version of sp flash tools you use?
if its V5 or higher
then you will find it as per attached image.
Click to expand...
Click to collapse
ndbhatt2006 said:
MrJukeHardbane said:
Where is this option Format all + download?[/Qwhi
which version of sp flash tools you use?
if its V5 or higher
then you will find it as per attached image.
Click to expand...
Click to collapse
Still same error. I guess its as good as a paperweight now.
Click to expand...
Click to collapse
MrJukeHardbane said:
ndbhatt2006 said:
Still same error. I guess its as good as a paperweight now.
Click to expand...
Click to collapse
now there should be hardware problem you can get checked with service center.....
Click to expand...
Click to collapse
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
Can we flash custom roms from sp flash tool (the ones which we flash from Cwm recovery)
---------- Post added at 02:12 AM ---------- Previous post was at 02:08 AM ----------
ndbhatt2006 said:
MrJukeHardbane,
First of all you need to download A116 Stock ROM, Drivers and SP Flash Tools by googling.
Then Remove your battery of the phone and SIM cards as well as Memory card,
Then install A116 Drivers in your PC then open SP flash tools window by double clicking on Flash_Tools.exe
the windows of SP Flash tool will open then click on Scatter Loading and search for the A116 Stock ROM you downloaded and extracted and find MT6589_Android_scatter_emmc file and open it
find the Download button on the upper side of window and click on it
Then connect your phone to PC with the data cable and try pressing volume up button and power butter simultaneously 3 to 4 times them you can see at the base of the window your phone will get detected and connected with the port and rest process will be done automatically wail till you see the green circle on the screen.
Once you find green circle remove your device and try to start after fixing Battery and Sim card and memory card.
If your phone is soft bricked... It will definitely boot up and it takes about 10 minutes at first boot up so keep patience..
HIT THANKS IF I HELPED YOU :good:
Click to expand...
Click to collapse
And can u send link for stock Rom and drivers for mmx a116? Please
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
mielczareklukasz.poczta said:
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
Click to expand...
Click to collapse
Repeat the procedure pressing the small red button for 200 secconds whae you plug the usb cable for flash !
stympy said:
Repeat the procedure pressing the small red button for 200 secconds whae you plug the usb cable for flash !
Click to expand...
Click to collapse
Stympy
I tested connection with 200s (and 20s) red button pushed, but still the same issue.
After I release red button - I hear two times "windows new equipment connect" signal in laptop.
In SpFlash tool I see fast red 100% bar and messege "Error 4001".
mielczareklukasz.poczta said:
Stympy
I tested connection with 200s (and 20s) red button pushed, but still the same issue.
After I release red button - I hear two times "windows new equipment connect" signal in laptop.
In SpFlash tool I see fast red 100% bar and messege "Error 4001".
Click to expand...
Click to collapse
Can we do a team viewer sesion just to see the error and what is going on on your device manager ?
What windows do you have! Windows 8.1, 8, 7, xp ?
stympy said:
Can we do a team viewer sesion just to see the error and what is going on on your device manager ?
What windows do you have! Windows 8.1, 8, 7, xp ?
Click to expand...
Click to collapse
I use win7. Team viewer data I send you by mail.
mielczareklukasz.poczta said:
Hallo
I have problem with Lenovo P780 from 2013y.
After I broken my first (orginal) motherboard I decided to buy softbriced motherboard on local marked for 1 $ and try to fix it.
This motherboard arived to me with symtomps:
- after turn on -> charging logo only and red led
I tried to load ROM but I had a lot of problems with MTK drivers (I had error in SPflash: "Sp_flash tool error (4001). I read a lot of threads from this forum and found a lot of solutions (from Stympy user etc). I found MTK Driver Gooooooddddd or somethink and I can start to flash my lenovo but I forgot to set "DL DA Check Sum" After finish of flash I get green circle.
But after this lenovo start to bootloop with "TOOL DL image fail" and still reset after few seconds till I put red "reset" button.
When I connect it to laptop - I see MTK Preloader Drived in Device Manager for few second and disappears. I can't start flash it again because I get messege "Flash Tooll Error 4001"
I tried a lot of SPtool version, Rom version and MTK Driver versions - still the same error after click Firmware->Upgrate and connect phone to usb
Can somebody try to find solution? Thx
Click to expand...
Click to collapse
i had come across the same problem. after extensive research i came across one hint. the error could be due to wrong sp flash tool. so i downloaded the rom and the sp flashtool from the same site
go to needrom.com download/lenovo-p780-4-4-2-vibe-ui-2-0
download both rom and the sp flash tool from the same place
it should work. let me know.
mobin79 said:
i had come across the same problem. after extensive research i came across one hint. the error could be due to wrong sp flash tool. so i downloaded the rom and the sp flashtool from the same site
go to needrom.com download/lenovo-p780-4-4-2-vibe-ui-2-0
download both rom and the sp flash tool from the same place
it should work. let me know.
Click to expand...
Click to collapse
I downloaded these packed I tested - still the same problem with error 4001.
mielczareklukasz.poczta said:
I downloaded these packed I tested - still the same problem with error 4001.
Click to expand...
Click to collapse
i had formated my mobile before i loaded the new rom. also recheck the path in the sp flash tool. check that its showing the path correctly to the specified scatter file.
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
hello i bricked my gr3 and now i am tring to unbrick it with sp flash tool installed every driver and there is no problem with drivers just when sp flash tool starts downloading it get stuck on AD 100% and after 10seconds it says error 2004 help plz
Gigageo said:
hello i bricked my gr3 and now i am tring to unbrick it with sp flash tool installed every driver and there is no problem with drivers just when sp flash tool starts downloading it get stuck on AD 100% and after 10seconds it says error 2004 help plz
Click to expand...
Click to collapse
Hi , did you try with other version of SPFT like this one ?
https://www.youtube.com/watch?v=9sly6LGIB0c
Try to disable driver signature , Run As Administrator and disable your Antivirus also and try. Good luck
Teddy Lo said:
Hi , did you try with other version of SPFT like this one ?
https://www.youtube.com/watch?v=9sly6LGIB0c
Try to disable driver signature , Run As Administrator and disable your Antivirus also and try. Good luck
Click to expand...
Click to collapse
Yes i tryed that too diffrent sp flash tools and driver signature disabled and runs as administrator i reinstalled drivers multiple times abd they all are working i tried everything i could imagine
Gigageo said:
Yes i tryed that too diffrent sp flash tools and driver signature disabled and runs as administrator i reinstalled drivers multiple times abd they all are working i tried everything i could imagine
Click to expand...
Click to collapse
1. Try another USB Port.
2. Lunch SP Flash again as admin.
3. Try another PC.
4. Check that the battery in the device is charged.
5. Try with diferent usb cable
6. Try another firmware
Teddy Lo said:
1. Try another USB Port.
2. Lunch SP Flash again as admin.
3. Try another PC.
4. Check that the battery in the device is charged.
5. Try with diferent usb cable
6. Try another firmware
Click to expand...
Click to collapse
well i tried everything but there is problem with step 5
i know that my battary is charging but when it gets enough power to start the phone it starts and instantly shut downs and this heppens every time i instert micro usb in but when i press buttuns it goes to meta mod (i think because i can see device with mtk drivers) and when i try to flash stock rom in sp flash tool it gets stuck on da 100% and i get error 2004
also i bricked my phone when i flashed u-boot.img as boot in twrp does that has to do something about sp flash tool or enything?
Gigageo said:
well i tried everything but there is problem with step 5
i know that my battary is charging but when it gets enough power to start the phone it starts and instantly shut downs and this heppens every time i instert micro usb in but when i press buttuns it goes to meta mod (i think because i can see device with mtk drivers) and when i try to flash stock rom in sp flash tool it gets stuck on da 100% and i get error 2004
Click to expand...
Click to collapse
Try again to flash latest stock firmware but not just keep holding Power button during flashing with SP flash tool , you can try also Beta Version of SP Flash tool .
Teddy Lo said:
Try again to flash latest stock firmware but not just keep holding Power button during flashing with SP flash tool , you can try also Beta Version of SP Flash tool .
Click to expand...
Click to collapse
Well i found only one firmware for my phone with proper scatter and i am using that and beta versions is not working too
Look here and try with sd update .
http://huawei-firmware.com/phone-list/huawei-gr3
Teddy Lo said:
Look here and try with sd update .
http://huawei-firmware.com/phone-list/huawei-gr3
Click to expand...
Click to collapse
nvm i fixed it i dissasmbled phone and removed battary wire then it installed
thank you for response