Related
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off) - UPDATE: I see now this one will not work in the HC OS as the system requires user interaction to set GPS
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Never heard of that but it sounds like an awesome app
Sent from my Transformer Prime TF201 using xda premium
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Haven't gotten my Prime yet, but that Tasker app sounds pretty cool. It sound kind of like JuiceDefender, except there's a lot more options.
With those settings, what kind of Battery life do you get?
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Lock-N-Load said:
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Click to expand...
Click to collapse
That's epic.
Sent from my Transformer Prime TF201 using xda premium
Tasker is pretty awesome!
A bit of a learning curve, but once you figure it out, the sky is the limit.
I have a profile that if I receive a text while driving, it autoresponds telling the person texting and driving is dangerous and I am currently driving at xx MPH and will get with them later.
I get a lot of people inquiring about that one.
The most useful one I have is it looks at my calendar and if it is during the time of my meeting, it automatically puts my phone on vibrate. That way I don't have to worry about it. When meeting is over, it reverts back to normal.
Yes, tasker is INCREDIBLE. Once you figure it out, it can almost double your battery life (at least it did on my phone).
You can try reddit.com/r/tasker, where most people post awesome tasker profiles and ask for help accomplishing certain settings. There are also a ton on the internet if you google search for tasker set-ups:
http://tasker.wikidot.com/profile-index (this is a great one)
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Tasker is one of the defining differences between ios and Android. Really shows off how powerful android can really be if you're willing to take the time
OP wanna post your profiles? And maybe a quick writeup (or link) how to apply them for those who dont know...
I used to use tasker for BLN to enable notifications from various apps that normally didnt work with BLN, as well as making my phone vibrate every minute or so if theres a missed notification (text, etc) for aprox 5 minutes just so that way if i was with a customer at work (retail) i could deal with the customer but wouldnt forget about the messages i got
Awesome app indeed.
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
Put a small SD card in the dock. Have Tasker check when it mounts/unmounts.
Might not work since there's no notification on unmounting /Removable/SD. Maybe have it check for access to /Removable/SD every X minutes?
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
if you are rooted, keyboard manager is a free app in the market that does this. when im not docked, i gvet thumb keyboard 4. when i am docked, asus stock. hasnt failed me yet
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
I have 4 profiles that I copied from my phone to do the same tasks:
Home: When near my Home wi-fi AP, turn on wi-fi. When no longer near the AP, turn off wi-fi.
Sleep Mode: Put device on silent, turn on airplane mode (11PM-5AM).
Work Location: When near my office wi-fi, turn on wi-fi, turn on silent mode. When no longer near the AP (i.e. not at work), turn off wi-fi, turn off silent mode off.
Work Timer: During work days/hours (M-F 6-3), turn silent mode on. After work hours, turn silent mode off. Exception: if there's an event with a description of "Vacation" on the calendar. If that exists, device does not go into silent mode.
There are others that I use on my phone.
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
BRILLIANT! I have actually seen no use for tasker for myself til now. I've always REALLY liked he concept, but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
stretchwookie said:
but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
Click to expand...
Click to collapse
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Lock-N-Load said:
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Click to expand...
Click to collapse
i understand how powerful this tool can and is. but i shut my prime off at night... there is no battery to conserve... lol sorry. im glad it works for you guys though! it REALLY may be worth investing the money into though JUST for microsd unmount alerts.
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Lock-N-Load said:
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Click to expand...
Click to collapse
i believe you are correct. but i am not very imaginative. so its very possible that i cant just find a use for it, doesnt meant that it isnt there. i plan on doing some research into some of the already made profiles to see if someone interests me. so far, the unmount microsd seems to be the only plausible for me
Not sure how I missed this thread before; I'm a huge fan of Tasker. All of what follows was written for my Samsung Epic 4G: I don't even have Tasker installed on my TFP because so much of what I do is smartphone-focused. Sooner or later I'll get around to putting together some tablet-specific scripts.
Surreptitiously snaps a photo from the front-facing camera every time the screen is unlocked, with no visual or audio indication. This is set up so as to always keep the last 2 photos stored, and will overwrite older photos. Images can be retrieved remotely via a secret text message.
Set up secret text messages that trigger the phone to gather information such as GPS location (reverse geocoded to an address), speed, heading, altitude, local cell tower ID and signal strength, nearby and connected WiFi SSIDs, WAN IP, currently open app, whether the screen is turned on, battery strength, and covert photographs taken from the front and rear cameras (including the one that was captured from the front camera when the screen was last unlocked) and text/email me back without notifying whomever has the phone. Another message will make my phone freak out, announce it's been stolen, announce that all of the above information has been sent to the owner of the phone, flash the LED in an SOS, and force all outbound calls to go to me.
If I send a secret message to my phone, it calls me back, and enables speakerphone, so I can speak with whomever has my phone. It also reroutes any outbound calls to my number. I can also ask it to send me photos from the front and rear cameras on the phone.
Ensured that when the phone is connected to my home's local cell tower, it always rings when I call it. I never have to worry about it being on vibrate while under a couch cushion or in a snowbank next to the driveway.
When I plug in a headset or it connects to my car's bluetooth, it pops up a list of media applications for me to use, and if I don't select one or back out of the selection, it automatically starts my Pandora, and kills the app when I unplug / disconnect. Basically, I get in my car, my music plays. I get out, it stops. Same with headphones.
When it detects the cell tower near my work, it enables vibrate.
If it detects a cell tower that is not the one near my home or work, it turns on the ringer and disables WiFi (unless I re-enable it).
If someone calls me that I don't even want a voicemail from, I add their number to a list in Tasker, and when they call me, it picks up the line and immediately hangs it up. Working on one that will play back a fake "Your call could not be completed as dialed" message.
Checks accuweather.com in the morning on work days to see if it's raining, snowing, sleeting, or hailing. If any of the above, it rings an alarm 30 minutes early. I also built in snooze functions and a voice notification in the morning about the outside temperature and conditions. This script recently broke (accuweather probably did something to affect the output of my HTTPGet) so I've been using the voice notification in Alarm Clock Plus, though it doesn't wake me up early. With current weather conditions I'm going to have to get my script fixed for the head start. My how-to on this script is on Tasker's wiki, here: http://tasker.wikidot.com/weather-clock
If I start Google Navigation with GPS disabled, it closes the app, enables GPS, and starts the app back up again. No more fiddling with GPS settings while on the go. Sometimes this script is not 100% reliable... I've got to look at it again some time to figure out why.
I made a blog post a while back about how to take the pictures remotely with the camera, and you can read about it here:
http://sean-the-electrofreak.blogspot.com/2011/10/more-fun-with-tasker-covert-mugshots.html
The email-attachment part can also be used to send audio recordings, which I've not actually implemented yet but wouldn't be difficult.
I've been putting off for the last 6 months or so my write-up on all the rest... I just have to find time for it!
Guys,
Lot of talk regarding battery life/ standalone/ accuracy of gear S apps for running.
Used both Nike and S Health- to me both were standalone.
Few bullets
1) some stated that even with GPS on and locked that s health still uses pedometer for distance? (is this true?)
2) I'm still confused if I need gear network AND/OR mobile network on/off - does this affect battery life- if I leave OFF all networks...will my run sync once I turn mobile network or Bt with phone on?
3) any way to get splits read to you (cannot believe this is missing)
4) I don't think this device will get through a marathon unfortunately
Yikes! Just did the car test (run shealth with hand out car) and I can confirm that it doesn't use gps for anything other than map. Feel duped
Relies on pedometer I think
Sorry for my blast posts. It is possible that it only records speeds in running range? I shook hands and didn't increase speed. Also noticed a bike option. Perhaps wrong about duped. Lol
Hello Jeffruby,
I've been in contact with Samsung about S-Health on Gear S and they confirmed that they are not measure the distance with the GPS, just the map (Totally insane!)
The Nike+ app is tracking the distance correctly with GPS though. If you have everything turned on (GPS, GSM, Bluetooth), then you would get probably about 4-5h of battery time. My goal is to use it on the next marathon and be able to listen on music for the last 60min of the race but i guess I need to run on 3:30 or something to make this possible
BUT, unfortunally the Nike+ app are missing the most important thing and that's the avg pace for the total run. It just show current pace and I don't really like that since it's changs so often so it's hard to see what speed you are runnig at.
So, yeah, I really hope for an update on either of these running apps ASAP!
HTC, thanks.! What a shame re s health app. How do you think it does distance for biking though if uses pedometer for distance?
The Nike app is close to being good..... I can't see the red on black, while your running you can't read scrolling info and of course the avg pace of run is the gold
Also in Nike app you have to turn on GPS manually, not from the app, if you want to track distance accurately. If you don't it uses accelerometer. With GPS on in general battery life is not good. My longest run was 30K in 2:45 had 18% battery left. Also there is one more strange thing about S health - calorie count maxes out at 1000
OK , so I did another test today - used shealth on bike mode. Stuck arm out car window with GPS on. Kept arm still. It tracked distance completely accurately. This tells me that the s health must indeed use GPS accurately. I think the jog portion only measures speeds in running or walking rates as it did not pass my car test.
The Nike app is a bummer as you can't verify GPS lock before it starts. Also the reasons mentioned prior.
The s health app is easier to read but doesn't show you 1 mile splits on the phone app. This is unacceptable.
Completely agree with the issues mentioned with nike+ Visual gps status before starting, the ability to display the info you want while running, and a always on mode during use would also be handy. Now I have to flick my wrist and wait untill the display goes on. It takes too much time and you're not seeing what's happening before you. A quick glance should be all. Currently i use a gear store app called screen awake for this.
Yeah, i have been logging miles with the Nike ap too. Its not perfect, but it works for me.
I have 79 miles all logged on my Gear S nike ap this year.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Not to mention Nike app wastes battery with hr but doesn't record it.
The S Health app records continuous HR during your run. I'm not sure how the Nike+ app works to record HR data. Is it continuously tracking/recording HR data? Or does it do it intermittently when you activate the display and wait for the information to scroll (on the bottom of the screen) to HR?
glenner05 said:
Completely agree with the issues mentioned with nike+ Visual gps status before starting, the ability to display the info you want while running, and a always on mode during use would also be handy. Now I have to flick my wrist and wait untill the display goes on. It takes too much time and you're not seeing what's happening before you. A quick glance should be all. Currently i use a gear store app called screen awake for this.
Click to expand...
Click to collapse
In the Nike+ app there's a small round indicator in the upper righthand corner that turns green as soon as there is a GPS lock. Always on mode is great, but it increases battery drain, so I just do the wrist flick.
Jerome, I think he is referring to indicator if Nike gps locked in before you hit start run. No runner wants the first 0.1 mile not to be recorded.
htcdiamondswe said:
Hello Jeffruby,
I've been in contact with Samsung about S-Health on Gear S and they confirmed that they are not measure the distance with the GPS, just the map (Totally insane!)
Click to expand...
Click to collapse
Could it be that the person you talked to had no idea what they were talking about (my usual experience with samsung, sadly)?
I am asking because Gear S tracks distance even with data off. After the run, if i don't see a map, only a track of my steps(*), I think data was off, but I still get the same results. I took mine to Europe with me and still got the distance tracked on my runs, even though the SIM card in it wasn't working. Wouldn't that be a sure indicator that what Sammy told you is incorrect?
(*) when data is on, my tracks are superimposed over a map.
xendula said:
Could it be that the person you talked to had no idea what they were talking about (my usual experience with samsung, sadly)?
I am asking because Gear S tracks distance even with data off. After the run, if i don't see a map, only a track of my steps(*), I think data was off, but I still get the same results. I took mine to Europe with me and still got the distance tracked on my runs, even though the SIM card in it wasn't working. Wouldn't that be a sure indicator that what Sammy told you is incorrect?
(*) when data is on, my tracks are superimposed over a map.
Click to expand...
Click to collapse
Hello,
I guess I have to answer both Yes and No on that question
I've tried to reinstall, run without data, without simcard, yeah, tons of different test and it's always way off (map is accurate but the distance it shows is totally off). Another poster in this topic also had the same issue but then he told me to test and choose 'cycle' as training mode instead of running, and, when I did that, then S-Health tracks the distance accurate. So, with other words the application have support for tracking distance in that training mode but of some reason it seem to choose to track the distance by counting steps if I choose running/walking as training mode. So, i'm not sure, maybe your device of some reason have this working on all traning modes. I hope so, and, that someone can explain for me hoooooooooooooooooooow to change this
My gear s tracks distance very accurately when I run gps on. However with GPS off using pedometer it overestimated my distance by approx 0.1 per mile. So gps must work. I did discover as mentioned above, that at high speeds need cycle on.
Not sure if this has anything to do with anything, but my Gear S is the US ATT variety.
In my case, I am fairly certain that no maps are used for measuring distance. Maybe I lucked out.
And when I said my distance gets tracked earlier, I meant the tracks you see at the very bottom of the log in S Health, that correctly display where I took turns, looped back, etc. Without data on, there is no actual map behind them, with data on, there usually is (I had a few flukes before.) The pedometer would not know about turns taken, though.
BTW, I had issues getting a GPS lock for a while until I realized that my phone is messed up. Once I started using the Gear S in stand-alone mode, all was good.
Nice day finally.
Went for a 9mile jog. Turned on gps and went with Nike app. Saw the GPS and went.
Went to look at stats and apparently gps stayed grey (couldn't see in bright light)... Stunk. (also stinks couldn't read the red ticker tape at bottom in sun during run)- I'd use shealth if it had splits.
Anyway got home and tried s health. Also wouldn't lock gps. Linked with phone which I previously left home.
Went to gear manager and appa-and some odd update pushed to watch. Then gps worked again after disconnecting phone.
Bummer (and odd)
jeffrubenstein17 said:
Nice day finally.
Went for a 9mile jog. Turned on gps and went with Nike app. Saw the GPS and went.
Went to look at stats and apparently gps stayed grey (couldn't see in bright light)... Stunk. (also stinks couldn't read the red ticker tape at bottom in sun during run)- I'd use shealth if it had splits.
Anyway got home and tried s health. Also wouldn't lock gps. Linked with phone which I previously left home.
Went to gear manager and appa-and some odd update pushed to watch. Then gps worked again after disconnecting phone.
Bummer (and odd)
Click to expand...
Click to collapse
Thanks for your post; I'd appreciate it if you could update with your future experience post update and after making sure you have a lock
So today farting around with my GPS. Step 1, turn on gps, step 2 disconnected from phone on gear manager. Step 3- tried s health. And behold. Wouldn't lock. But.... I noticed that the pic showed the watch and the phone trying to lock, yet phone disconnected! Watch still somehow was trying to lock onto phone gps. So... I then turned off watch Bluetooth thinking the watch Bt was still thinking it was connected to phone... And voila... Gps locked. Even locked when I turned on watch Bt afterwards.
Important to note the pic on shealth showing watch or watch plus phone.... This behavior is new since updating to lollipop
I used S health today to test my brand new gear s. I cycled to the office. No problems for this. I even used my BT headphones during this ride (15 minutes). Afterwards I downloaded the gpx data from S health to my dropbox and uploaded the file to my on-and-only favorite running app RUNTASTIC. In runtastic you can see the split times.
bertrums said:
I used S health today to test my brand new gear s. I cycled to the office. No problems for this. I even used my BT headphones during this ride (15 minutes). Afterwards I downloaded the gpx data from S health to my dropbox and uploaded the file to my on-and-only favorite running app RUNTASTIC. In runtastic you can see the split times.
Click to expand...
Click to collapse
Correction, gpx only available if activity is cycling. Tried other activities but only cycling is provided with the option to export gpx stats. Strange.
Verstuurd vanaf mijn SM-P900 met Tapatalk
jeffrubenstein17 said:
Nice day finally.
Went for a 9mile jog. Turned on gps and went with Nike app. Saw the GPS and went.
Went to look at stats and apparently gps stayed grey (couldn't see in bright light)... Stunk. (also stinks couldn't read the red ticker tape at bottom in sun during run)- I'd use shealth if it had splits.
Anyway got home and tried s health. Also wouldn't lock gps. Linked with phone which I previously left home.
Went to gear manager and appa-and some odd update pushed to watch. Then gps worked again after disconnecting phone.
Bummer (and odd)
Click to expand...
Click to collapse
In Nike+, I found that I have to give the watch a moment to refresh the screen before stopping activity at the end of my run, because every time my screen goes black, the watch remembers those very last stats. When I turn the screen on for the first time after starting my run, it will show 0 km and a grey GPS signal, then go to the actual kms run and green GPS signal after a moment.
I use my Gear S in stand-alone mode, with BT off, location on and data on when running. One of the latest Gear S updates combined sHealth with Nike+ which slows down the signal lock in Nike+, from what I've read, so I don't have it installed. sHealth GPS lock takes forever and a day on my watch, while Nike+ is instantaneous.
Thanks a lot for sharing your experience about Gear S. I have also used Gear S and I found few issues with health monitoring apps. I am not using Gear S anymore. Now I am thinking about having a Modular smart watch.
thanks to biktor_bj soon we will be able to run strava, endomodo, runastic, mapmyfitness, runkeeper and every other amazing apps out there, THANK YOU <3
OMG I totally missed biktor's thread!! Thanks for posting this.
hackerse7en said:
thanks to biktor_bj soon we will be able to run strava, endomodo, runastic, mapmyfitness, runkeeper and every other amazing apps out there, THANK YOU <3
Click to expand...
Click to collapse
Who and when will this be ?
peter7 said:
Who and when will this be ?
Click to expand...
Click to collapse
we dont know, but he is working on it, some of the things are already working,
you can follow biktor_bj's thread here
Hello All. I've been searching this and other forums for an answer for several hours now, and haven't found one yet. Any help is appreciated. Just got a Gear Fit, and have it linked to my Galaxy S5. S health, Gear Fit manager, and watch are all updated to latest versions.
1) Heart Rate Monitor. I used the HRM on my S5 while working out on occasion, but found it useless due to the need to turn it on to get a one time reading. Part of the reason I got the GF was to have the Heartrate monitor. Unfortunately, it operates like S-health does on the S5. I have to turn it on to get a reading. Is there a 3rd party app that I can use to consistently monitor my Heart Rate while working out (so I can just glance at my watch and see it). Even better, one that notifies you if your HR goes higher or lower than desired?
2) Sleep tracker - is there an App that will autodetect sleep with this watch? I constantly forget to turn the sleep mode off, and end up with much longer sleep segments than I actually have (i.e. I take the watch off when showering and getting ready in AM, don't put it on till I leave for work, and end up with 45min-1hr more of 'sleep' tracked.
Thanks much!
For part 1 of your question - There is an exercise mode on the samsung gear fit which constantly monitors your heart beat.
Not sure about the second part though I have the same problem - I wish it did like the phone does and identifies when I am awake based on my movement also it would be good if S-Health allowed me to modify sleep time after recording - not sure if it can now.
I've noticed using Waze I'll see GPS go in and out, and occasionally I try to post pictures to Instagram and find out there's no GPS tagging in them. Anyone else seen this?
scottricketts said:
I've noticed using Waze I'll see GPS go in and out, and occasionally I try to post pictures to Instagram and find out there's no GPS tagging in them. Anyone else seen this?
Click to expand...
Click to collapse
YES! Install a GPS Test and you can actually see the amount of Satellites seen go to zero. I can sit in the same place for 5 minutes and it will go from 21 to 0 every 10 - 60 seconds with a clear sky. I am wondering if this is a software or hardware issue. It is noticeable when using Gmaps to navigate, you will see your arrow simply stop when driving down the highway for 5 seconds at a time.
btothec said:
YES! Install a GPS Test and you can actually see the amount of Satellites seen go to zero. I can sit in the same place for 5 minutes and it will go from 21 to 0 every 10 - 60 seconds with a clear sky. I am wondering if this is a software or hardware issue. It is noticeable when using Gmaps to navigate, you will see your arrow simply stop when driving down the highway for 5 seconds at a time.
Click to expand...
Click to collapse
Im sitting at my desk and watching it not get a fix. The location icon in the status bar never goes white, and the GPSTest just sits there not getting a fix. I've tried disabling the low power GPS option in settings with no luck.
btothec said:
YES! Install a GPS Test and you can actually see the amount of Satellites seen go to zero. I can sit in the same place for 5 minutes and it will go from 21 to 0 every 10 - 60 seconds with a clear sky. I am wondering if this is a software or hardware issue. It is noticeable when using Gmaps to navigate, you will see your arrow simply stop when driving down the highway for 5 seconds at a time.
Click to expand...
Click to collapse
Same here I've noticed on my t-mobile version.... Hmm...
---------- Post added at 09:10 PM ---------- Previous post was at 09:09 PM ----------
scottricketts said:
Im sitting at my desk and watching it not get a fix. The location icon in the status bar never goes white, and the GPSTest just sits there not getting a fix. I've tried disabling the low power GPS option in settings with no luck.
Click to expand...
Click to collapse
Sometimes indoors GPS has more difficulty. Has it worked there before with other phones?
EDIT:
Worked with my GPS navigation a bit more... definitely see the GPS lose tracking every few minutes. Turned off the iZat, didn't make a difference. Plugged in a power source, thought it might help a little, but nope, GPS lost every once in a while. Bah, just when I thought I had received a problem-free unit
Any more information on this? As of April 1st, my LG G5 seems to be way off on GPS. I noticed it using Runkeeper. I thought maybe it was a Runkeeper issue, but then used MapMyRun and got the same I looked in history and saw that since getting this phone (traded in my G4 for the G5) I had one successfully tracked run, then it all went haywire. Never had a problem with the G4 - so it can't be signal issues (IMO). And since this phone got it right once... that is strange to me.
To give an idea... I ran about 10 miles and it told me 18. When I looked at the runkeeper map it looked like I was running down side streets, into fields, crazy stuff. Like it never got a real lock on my location.
I'm wondering if I need to return this phone??
bdogi said:
Any more information on this? As of April 1st, my LG G5 seems to be way off on GPS. I noticed it using Runkeeper. I thought maybe it was a Runkeeper issue, but then used MapMyRun and got the same I looked in history and saw that since getting this phone (traded in my G4 for the G5) I had one successfully tracked run, then it all went haywire. Never had a problem with the G4 - so it can't be signal issues (IMO). And since this phone got it right once... that is strange to me.
To give an idea... I ran about 10 miles and it told me 18. When I looked at the runkeeper map it looked like I was running down side streets, into fields, crazy stuff. Like it never got a real lock on my location.
I'm wondering if I need to return this phone??
Click to expand...
Click to collapse
I have only used the G5 in the car a few times and it seems to work fine - using google maps, not waze.
I use a couple apps to track biking and they work fine. However, when I use them I use an app called GPS keeper pro to keep the GPS running all the time. It seems to help with apps for fitness. I started using it with the G3 and just kept right on with the G5. You might want to try GPS Keeper for your running apps.
I use GPS only in the location settings. That may help. At least my apps that rely on GPS open much faster with that setting.
Sent from my LGLS992 using XDA Free mobile app
My specific GPS issue was that it would lose lock a minute or so into a perfectly normal navigation lock while using Gmaps. It would relock after several seconds, only to lose lock again. This repeated over and over.
I was using the app GPS Status to monitor this. However, it hasn't surfaced in a few days, so I don't know if there was some rogue app or former setting that was interfering with GPS holding lock. I've hypothesized maybe it was GPS Status itself which was interfering. I uninstalled and reinstalled it, and so far *knock on wood* it hasn't popped up again.
This sounds a bit different from some of the problems listed here. The run tracker not getting a good track might be related to this, if it is never able to consistently keep GPS lock. Try monitoring the GPS satellite lock icon when the app is running. Does it go from lock (white) to not lock (grey)?
Mine is actually grey most of the time but when I'm connected to wifi calling it's constantly white. Weird. This thing needs an update for a few different reasons. Coming from the note 4 I notice differences in the software obviously but somethings seem like they don't quite work right. Example being when I used wifi calling on the note 4 it would grey out the regular signal but on this it's still active with the bars going up and down. I'm pretty sure it should cancel the network out all together but maybe this is just different. I don't know.
Sent from my LGLS992 using XDA Free mobile app
Maybe it's using the wifi connection hotspot to determine your location? So does your GPS really work at all then?
waylo said:
Maybe it's using the wifi connection hotspot to determine your location? So does your GPS really work at all then?
Click to expand...
Click to collapse
Well I do have it set to GPS only in location settings but until I get out and try to use maps I guess I really won't know. It does find me in maps or other weather apps though.
Sent from my LGLS992 using XDA Free mobile app
Well - I got my second LG G5 hoping that would solve the problem. Doesn't seem to be any different
I've tried this so far:
High Accuracy - Was Already Set
Turn off WiFi location
Tried GPS Keeper to keep signal alive
Tried GPS Status Utility - NOTED: Takes a long time to lock and still will start 'searching' for long periods of time.
Tried with no cover on
New phone seems the same I love the LG phone itself, but I can't handle this. I should have returned it for a Samsung. Are there any other tricks I am missing?
bdogi said:
Well - I got my second LG G5 hoping that would solve the problem. Doesn't seem to be any different
I've tried this so far:
High Accuracy - Was Already Set
Turn off WiFi location
Tried GPS Keeper to keep signal alive
Tried GPS Status Utility - NOTED: Takes a long time to lock and still will start 'searching' for long periods of time.
Tried with no cover on
New phone seems the same I love the LG phone itself, but I can't handle this. I should have returned it for a Samsung. Are there any other tricks I am missing?
Click to expand...
Click to collapse
Do you perhaps have greenify on? I have a theory that the aggressive doze may be affecting GPS lock duration.
waylo said:
Do you perhaps have greenify on? I have a theory that the aggressive doze may be affecting GPS lock duration.
Click to expand...
Click to collapse
I don't think I have greenify loaded? I searched in Google Play and it only says 'install', so can't be on my phone.
bdogi said:
I don't think I have greenify loaded? I searched in Google Play and it only says 'install', so can't be on my phone.
Click to expand...
Click to collapse
Correct, you don't have it installed then. Have you tried disabling iZat? It's the low power GPS addition, at the bottom of the GPS settings page.
Also, just to cover all the bases, you are outdoors when you're searching for GPS, right?
I have a stock T-Mobile G5, I've also noticed inconsistent GPS. Acts as if it's stuck. I'll open Google Maps and it'll show my location from 90 minutes ago. Won't update until I turn on airplane and then off again. Once the radios come back up GPS updates. Hoping for an update to fix this ASAP.
waylo said:
Correct, you don't have it installed then. Have you tried disabling iZat? It's the low power GPS addition, at the bottom of the GPS settings page.
Also, just to cover all the bases, you are outdoors when you're searching for GPS, right?
Click to expand...
Click to collapse
The low power GPS is turned off, yes. When I run the test I am running it right next to my window indoors. I run it on my HTC One (not activated) and my LG G5 (activated - new phone). HTC locks immediately (2-5 seconds) with 14/20 satellites, G5 does not lock for at least 3 minutse with anywhere between 18-26 satellites (I gave up after 3 minutes). I tried turning off/on airplane mode like the previous post - didn't change anything for me.
Even though the GPS doesn't show lock on the LG G5, I can get google maps working. It isn't very accurate, though. It sometimes shows me stuck in a location for about 1-2 miles. It also shows me off the roads, typically.
I found a way to replicate the GPS issue! I was having it behaving really intermittently on my car mount (vertically), and then I decided to tilt it horizontal and suddenly it got a lock! I've verified it by GPS test apps and it's super obvious that in a vertical orientation, the GPS doesn't get a proper lock.
Any of you guys wanna validate this?
I'm having this issue as well, sometimes takes a couple minutes or more to obtain initial lock when I get in my car every morning and start Waze (although it guesstimates my location based on last lock / WiFi), plus then it drops out 2-3 times per drive, which is incredibly frustrating and has caused me to miss turns. I lose lock with WiFi both enabled and disabled during my drive
As a couple people already said, I use the T-Mobile G5. I'm curious if all of us experiencing the problem use the T-Mobile version and it might be a carrier ROM issue. My network and GPS settings are how they were out of the box, although now that I know it exists, I'll try disabling IZat low-power location just to see if there's any improvement.
hot_wired13 said:
I found a way to replicate the GPS issue! I was having it behaving really intermittently on my car mount (vertically), and then I decided to tilt it horizontal and suddenly it got a lock! I've verified it by GPS test apps and it's super obvious that in a vertical orientation, the GPS doesn't get a proper lock.
Click to expand...
Click to collapse
My phone is always horizontal in my car dock, with the top of the phone facing left, but I'm still losing GPS lock. Do you use yours horizontally the other way?
I can tilt mine any way I want and it won't lock I ran a test this morning while taking my kids to school. I took out my old HTC One and turned on Runkeeper (running app). Turned Runkeeper on LG G5 (separate Runkeeper account to be sure nothing got screwy). G5 couldn't lock enough to map anything, HTC mapped perfectly to the roads. I then used VZ Navigator (Verizons map system - this was done at Verizon's request). The maps trailed me by about 1/2 to 1/4 mile and showed me about 200 yards off the road. Then - GPS lost. All the while - HTC mapped me out with Runkeeper perfectly mapped to the roads.
Since this is my second LG G5 with GPS issues... I think there is a problem with the phone or maybe the Verizon version of the phone. Sounds like T-Mobile also, though, so could just be some LG software screwing things up.
Either way - I'm probably getting the S7 now. I really like the G5 with the rear fingerprint scanner... but I need a GPS that works out of the box.