First, good afternoon.
Well, I have a Xperia x10 here and he just does not care. When I press the power button, it vibrates, but the screen it stays black and will not appear the Sony logo.
Would you like a help from the beginning. Already downloaded the FlashTool program and a generic version of firmware 2.3.3.
Thank you
PS.: Yesterday I turn on it normally
Sorry for bad english, i not speak so well.
Try getting it into flash mode (hold back while plugging in usb cable while the phone is off). If the PC doesn't detect it, its probably a dead mainboard.
I had this exact issue with an X10 a couple of years ago, it was one of three and none of the others ever suffered from it. The phone is still dead while older ones live on.
Related
Hello,
It happens.
I brick my phone x10 mini and its now stuck in sony ericson white written name.
It happens cause i Unluckyli i press "customize" button in x10flasher.
Can i reflash throght x10 flasher?
Any aid?
Tnx in advance.
Sol.
Dude jst re-flash again with Bin4ry Flash.....and this problem will no longer exists.
Or eventually, use SEUS/Companion repair method. Remember, when u turn off the phone (home button + power on button pressed), insert usb cable and keep the back button pressed for a while (2-3 min) until green led turns on.
The main problem was because you cannot take off batery.
I waited 7 hours with the stucked screem, than turn on charge, it boots up in chargemon.
From there, bin4ry worked very nice.
pedrocel85 said:
The main problem was because you cannot take off batery.
I waited 7 hours with the stucked screem, than turn on charge, it boots up in chargemon.
From there, bin4ry worked very nice.
Click to expand...
Click to collapse
man that wasn't necessary......in the back of the cell there is a little rubber cover you only take it out and you will see a socket a 3 wires, you just have to unplug it with a clip or somthing else and then pu**** to place it, and "ta da" you have taken out and placed the battery.......thats how i've recovered mi x10 mini bricked and it only take it to repair 10 min as max.....
Holding power and home button for 3 seconds also restarts the phone when it stuck on son ericsson screen
i did that and now it cannot turn on after numerous attempts
i cant find that rubber cover
there is a orange thing whcih can be pushed,but i cant find any wires....plssssssss can u help me out with more details and if possible with some picturessssssssss
you could try the sony Ericsson update service
Go to PC companion in your computer.Connect your phone while pressing back and home.In PC, choose Support zone and then click on update.KEEP PUSHING THE BUTTONS AND DO WHAT IT SAYS!Tada.Your phone is ready and loaded!
Sent from my X10mini ng XDA App
i've tried using PC companion, but i think there may be a bug or something. When i connected my phone, it says no software available.
Hi guys,
My girlfriend just got a new phone so I gave her old X10 mini to my moms. But í flashed cyanogenmod 6 first. This caused some serious issues: The phone wouldn't turn on - only when pressing home+power combination, the phone but eventually turn on.. but sometimes I had to do it many times and plug usb-charger in and out, etc. Very weird.
Today i flashe stock rom via SEUS and the issue is STILL present. Argh. I found out how to turn it on though:
When powered off, i first press the power-button once, till it gives a little vibration. I then press the power-button for a couple of seconds and then release it, then I press back-button and it powers on. WTF?!
Isn't that weird as hell? Is it a damaged bootloader and if so, how do I fix this when SEUS didn't do it?
Also I should mention that the little reset-button has gone.. it disappeared under the phone when I pressed it before og after flashing CM (can't remember). Could this cause this weird issue?
Thanks in advance, from me and my mom
EDIT: It seems that X10 mini (and pro) has a bug with some sim-cards... It works with no simcard inserted. I'll try another simcard in a moment. Jeez..
jesus... even if I choose reboot from xrecovery, it does that stupid thing where it kind a locks itselfs...
Hi,
My x10 mini pro started to act "funny" (restarting and shutting down by it self) so I found this forum. Kept reading a lot of posts for 6h until I decided to try flashing it with a costum rom to fix it.
Flashed via flashtool the Sony Style's 1.1 by paul-xxx; it worked for a while, then shut down again. But this time, with flashing red light (3 times, with hard-reset [home+power button] when trying to turn on and a looping red light (every 3~4 seconds) when trying to get to flash mode.
After some time, it vanished from existence and was presumed dead. No lights, nothing at all. Send to repair, they couldn't fix it, but they restored the lights (red loop again).
So, now it got dead again. I have two batteries, both charged, but still nothing.
I really don't know what to do. I thought it was HW damage, but the repair guy said it was software corruption.
So, any light on my head ? :/
Mazzocato said:
Hi,
My x10 mini pro started to act "funny" (restarting and shutting down by it self) so I found this forum. Kept reading a lot of posts for 6h until I decided to try flashing it with a costum rom to fix it.
Flashed via flashtool the Sony Style's 1.1 by paul-xxx; it worked for a while, then shut down again. But this time, with flashing red light (3 times, with hard-reset [home+power button] when trying to turn on and a looping red light (every 3~4 seconds) when trying to get to flash mode.
After some time, it vanished from existence and was presumed dead. No lights, nothing at all. Send to repair, they couldn't fix it, but they restored the lights (red loop again).
So, now it got dead again. I have two batteries, both charged, but still nothing.
I really don't know what to do. I thought it was HW damage, but the repair guy said it was software corruption.
So, any light on my head ? :/
Click to expand...
Click to collapse
If You're still able to enter into flash mode, try the SEUS restore.
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Then show it to Your repair guy...
Cheers,
M.
mum_laris said:
If You're still able to enter into flash mode, try the SEUS restore.
http://forum.xda-developers.com/showpost.php?p=17458289&postcount=8
Then show it to Your repair guy...
Cheers,
M.
Click to expand...
Click to collapse
No flash mode. That's my curse ç.ç
If I could just get it up, SEUS is waiting for it.
Mazzocato said:
No flash mode. That's my curse ç.ç
If I could just get it up, SEUS is waiting for it.
Click to expand...
Click to collapse
Dont know if it can help. .but give it a try with a new connecting wire.. maybe the connecting wire/port is damaged.. because it was the same with one of my friends.. he replaced with a new battery n a cord n it got fixed.. give it a try.. till then will search for u.. if found will post back..
Used a new one, from my girlfriend's 2011 mini pro, bought a new battery and fully charged on another phone. Still, no flash mode.
I would say that the port of the phone is out, but the repair guy used it with no problems... as he said.
The phone was hers, but she bought a new one. once this turned into a brick.
If I fix it, is mine... but, maybe there is no solution... :/
Just confirmed: Battery isn't the issue here. Recharged them to 100% and still the phone won't give a single sign of life.
Apparently, I'm doomed. I don't have money to buy fixing boxes and cables, but it really pains me out.
I already downloaded all the cooking material to start working on it, but... I guess it's dead.
As I searched, x10 mini pro doesn't have a test point, but a cable set up in the back board. But I couldn't find the schematics, just boxes... that will cost me a LOT.
I'll be watching the thread and test new options you guys give me... but that's all.
Sorry to bother you all with this issue..
Red light blinking again. 3 with home+power and constant bliking red connected to PC or trying flash mode. I'm confused now >_>
Mazzocato said:
Red light blinking again. 3 with home+power and constant bliking red connected to PC or trying flash mode. I'm confused now >_>
Click to expand...
Click to collapse
but if You:
- open flashtools on Your pc
- connect phone by cable - also powered-off, what did You read from flashtool?
Here You can find it...
http://forum.xda-developers.com/showthread.php?t=826455
Let me know...
Cheers,
M.
Phone isn't detected.
EDIT: It doesn't respond with or without flash mode. But when I disconnect it from the cable, he blinks a red light 3 times in sequence. Same with home+power.
Mazzocato said:
Phone isn't detected.
EDIT: It doesn't respond with or without flash mode. But when I disconnect it from the cable, he blinks a red light 3 times in sequence. Same with home+power.
Click to expand...
Click to collapse
You've also installed the Gordons Gate drivers before doing Your tests?
from the flashtool folder install <flashtool folder>\drivers\gg-????.exe
Then reboot pc and re-try...
Yep. GG-setup.exe installed. Restarted.
Phone looks "dead". But it blinks red lights without the charger / cable usb.
Odd.
EDIT: Left charging on the wall with red blinking light. Dead again. No sign of life whatsoever.
Update:
Noticed that it "ignores" my attempts on the screen buttons. Back and home = same reaction... as if I wasn't pressing them.
I'm thinking that I've got hardware problems... or some HARD software issues. =/
Help NO gsm!!!
Hi I tried to unlock bootloader but after going through the tests my gsm failed to start working phone just says please insert sim card but there is nothing wrong with the sim. Please need advice
My girlfriend's X10 mini won't start anymore, so i bought her a new Xperia Mini. But i'd like to get however this one working again.
THE FACTS:
- Phone won't turn on in ANY way.
- Battery seems ok. I also disassembly it and cleaned the contacts.
- If connected to a pc, i can Hot Reboot and see the red led blinking, but it won't work all the times. If connected to a wall charger phone seems completely dead.
- Sometimes red led blink also if i hot reboot with phone disconnected. Sometimes.
- Only once, having power+home pressed, phone vibrate and my pc seems to recognize it. But it stock on installing peripherical driver and when i released home button to have a hand free for the mouse, phone disconnected.
- Neither Pc Compainon, neither SEUS, or Flashtools can recognize phone when plugged with back button pressed. It seems it cannot enter flash mode.
I searched and tried EVERY SINGLE thread, but nothing seems to work.
Am i doing something wrong, does someone have an idea, or may i consider this phone definitively bricked??
It sounds to me like your battery is well and truly dead and buried.
so, changing the battery is the way. ok, i'll try
Use the battery which is fully charged....then use SEUS...... Then u will get ur cell back....
Sent from my U20i using XDA
Well, just a couple minutes ago, my x10 mini died. I was using it normally, without overheating, not overclocked..., just undervolted! I've got for 14 months, and since last 12 i've got the bootloader unlocked and nAa kernel with MiniCM 2.X... A couple of weeks ago I installed ArcMini rom without problems! Yesterday night I tried to turn off WiFi from the statusbar button, but the light under the icon kept half turned on (sorry for my english :S)... I didn't though it was a problem, but a couple of minutes ago, i tried to turn on an it didn't respond!! so I restarted the phone with the power + home button, like some other times, but now it didn't turned on!!
Now, the led doesn't light up, doesn't vibrate, when I plug into a computer or AC, it does the same: nothing!! What happened?? what can I do?? Warranty is avoided since i unlocked the bootloader, isn't it?? :S
Thanks!!
look the same happend to me but with no custom firware i sent it on the sony ericsson repair store and they told me that the cpu was burned.They repaired my phone because it had warranty.I think yo should try to repair it with flashtool
Theliakos said:
look the same happend to me but with no custom firware i sent it on the sony ericsson repair store and they told me that the cpu was burned.They repaired my phone because it had warranty.I think yo should try to repair it with flashtool
Click to expand...
Click to collapse
I think, if his cpu is bust, repairing with flashtool is not an option, i think getting a new phone might be in order
y should try to make sure that the x10mini is dead before pull out the x10mini cover and with a pinch pull out a rubber cover next to the camera you should try to disconnect that connection an then reconnect it
try to take out the battery, and wait for a while, insert it again. try to turn it on.
if it doesnt work. try to wait longer, not more than 10 min.
if it doesnt work at all, I would like to try to flash it again with the flash tool.
That would be the very basic part of the phone. if the mode can not be actived (pressing the back on phone and plug to usb) by using flash tool. then you possibly facing a hardware problem.
GL