Hey all!
Is there a way to disable the bluetooth message access profile with a 3rd party app or can it be removed from the kernel? Reason being: I have a 2013 Ford Explorer and have issues with Message Access not remembering settings. So, every time the phone connects to the car, it notifies me of my old messages, which I do not want. I don't use this feature so would be fine if it was disabled completely. However, to do this, it would need to be disabled (turning message access off in settings doesn't work, as when the phone reconnects, it gives it access again). Any suggestions?
Thanks!
Related
I am looking for an app that automatically switches off the cellular radio when wifi is connected and switches it back on when wifi loses connection. I'm not talking about the APN data connection which already does that, I'm talking about the regular cell phone connection.
According to my lack of results searching through the forums, Market, and Google, such an app does not exist yet. Currently the best app I've found to do anything remotely like this is the Airplane Mode Wi-Fi app, which is a manual switch and a slightly cumbersome one at that, not nearly good enough for how often I go in and out of wifi.
The reason I ask for this is because I use Google Voice with SIP and a prepaid plan. I want to use SIP as much as possible to save my prepaid minutes for when I really need them. When wifi and cell are both connected with Sipdroid running and I receive a call, they both ring at the same time. To be sure I don't accidentally use prepaid, I usually reject the call and call back over SIP, which is slightly annoying for both me and the caller.
Might someone be willing to create this app? Or better yet, does it already exist and I just wasn't doing the right searches?
You can turn the phone radio off with code but you need to use non-public apis and probably extra permissions. For anyone interested, have a look at RadioInfo.java (Phone Info when selecting an activity with AnyCut).
I'll add the option to the Airplane Mode Wi-fi Tool.
It was simple, I'm testing it right now, then I'll update it in the market as soon as it works properly.
UPDATE: Done, go download "Airplane Mode Wi-Fi Tool" (free) from the market if you'd like to stay updated from there, otherwise install it from the attachment here.
It only enables airplane mode if it successfully connects to a Wi-fi network, if it disconnects, connection gets dropped, or wi-fi gets disabled from the settings or widget, the phone goes back to regular radio mode.
Make sure to check the Preferences and enable/disable it according to your preferences. It's disabled as default.
Enjoy!
Perfect! Airplane Mode Wi-Fi Tool has become one of my top favorite apps with this feature. Thanks!
cant' find it on the market
sorry: I needed to search for the translated name
zorxd said:
is this app still available on market? Can't find it.
Click to expand...
Click to collapse
It is, Market link -- Airplane Mode Wi-fi Tool
Also, you might be interested in this one, Market link - AutoAP
I found the application on the market, however it doesn't behave as expected. I have to manually switch to airplane mode, and then enable wifi.
What I would like is a single switch to enable wifi AND disable the cellular radio.
And then a single switch to switch back to cell radio with wifi off.
I will try autoAP, thanks
How hard is it on the battery if I always leave wi-fi on even when not used?
autoap seems just fine, I just have to disable wifi to automatically enable cell radio
thanks
However I think, from a marketing point of view, you should consider a better name. Auto AP sounds like Automatic Access Point to me.
Yeah, works fine on tablets without internal 3G. This provides a battery saver.
Is there a way to reconnect to wifi whenever an application accesses the network?
Background: I have a rooted e-book reader that runs Android 2.2 (Sony Reader PRS-T1). The system offers an option to automatically enter wifi standby mode when the connection is idle, which I like: This behavior saves a lot of battery juice when reading an e-book.
Some of the preinstalled apps know how to reconnect the wifi whenever they need network access. Unfortunately, conventional Android apps do not know how to do this and fail. For example, I have installed the Kindle for Android app, and it fails to sync reading positions unless I have manually re-enabled the the wifi before trying to do so.
Is there a method to leave wifi standby mode and reconnect to wifi whenever there is demand?
altruizine said:
Is there a way to reconnect to wifi whenever an application accesses the network?
Background: I have a rooted e-book reader that runs Android 2.2 (Sony Reader PRS-T1). The system offers an option to automatically enter wifi standby mode when the connection is idle, which I like: This behavior saves a lot of battery juice when reading an e-book.
Some of the preinstalled apps know how to reconnect the wifi whenever they need network access. Unfortunately, conventional Android apps do not know how to do this and fail. For example, I have installed the Kindle for Android app, and it fails to sync reading positions unless I have manually re-enabled the the wifi before trying to do so.
Is there a method to leave wifi standby mode and reconnect to wifi whenever there is demand?
Click to expand...
Click to collapse
Yes. You could buy an app called Tasker. It automates whatever you want on your android so you could tell it to, for example, turn wifi on when certain apps run.
There is also a free seven day trial version so you could see if it is worth it for you.
Dave
( http://www.google.com/producer/editions/CAownKXmAQ/bigfatuniverse )
Sent from my LG P920 using Tapatalk 2
Thanks for your reply!
Yes, I know about Tasker, and have thought about it before. Unfortunately, it does not quite cover my use case:
Often, the need for Wifi access doesn't depend on which app is running, but on what I'm doing with one particular app. In case of the Kindle app, I'd like Wifi to go disconnect when reading, but to reconnect when syncing books or reading positions.
Hi,
My apologies if this is the incorrect section. I know the Virgin Mobile SGS2 is NOT the I9100 model, however the correct phone was not listed on this site (nearest is the T-Mobile model, but the options differ on their phone).
I'm experiencing an issue with trying to enable the wireless hotspot option for my phone. In every instance I have tried, I have received errors that ad-hoc failed to start and related problems. Let me make it clear that this version of the samsung galaxy DOES NOT have the option to turn on wireless tethering in the native settings menu (it's simply not there). My carrier most likely hid the option because it is an extra $15 a month to use the feature. I can, however, attempt to start the hotspot service with a third party app, but it runs for no more than 3 seconds and I get error 67:" Unable to connect to data network, turning off Hotspot..."
My phone is rooted and I have full access to edit system files (I did so to remove the ear-piercing camera shutter noise). I am using the stock rom and do not intend to flash a different rom to this phone. To lessen redundant suggestions that have been said hundreds of times and have failed to fix my issue, here is everything I have done:
Attempted to use FoxFi. All this app does is start the native hotspot capability on your phone, so I got the same error 67. No network connection. The network only appears for a split second when enabling the native hotspot setting, but since the phone turns it off, I can't connect to it.
Attempted to use Barnacle. I receive the error "Could not set ad-hoc mode of wlan0: Operation not supported on transport endpoint."
Attempted to use Wifi Tether for Rooted Users (for some reason this app is listed as "Not Compatible" for my phone in Google Play). Again, I receive an error that setting ad-hoc failed. All other services start successfully though, but the network does not appear for my PC to connect to.
Checked to make sure my 3G/4G is actually on and functioning.
Despite all this, I CAN utilize the USB tether feature just fine in PdaNet. It's the wireless hotspot that is eluding me. I know that flashing a different rom can get me around this issue, but I really would prefer to resolve this problem without doing that if it's possible. One thread I read said something about editing a .db file, but it was for an HTC phone and I'm a little wary to try it on my phone. I'm sorry for coming off rather cross, but I'm just a bit frustrated as every solution I find never works. It seems like this would be a simple thing to do. Is there a system file I can edit that will allow my phone to enable its native hotspot capabilities? Or something that will resolve the ad-hoc issue? Or am I blindly over-looking something obvious? If nothing will work except for flashing, then hey, at least I tried. It's not going to kill me if I can't get the wireless tethering to work, but it was one of the reasons I wanted to root my phone.
Any help would be greatly appreciated. Thanks in advance!
I randomly figured out the problem myself. Downloaded something on a whim and it actually worked. Let me go through each step so anyone else who has this same problem can try this out.
The majority of what I did can be followed here:
*Can't post the link. Thank you, forum restrictions... It's from a website called "highonandroid.com" so google that with the appropriate keywords (wifi tether, android, etc.).
But in case the link goes dead or something like that, here is a step-by-step reiteration:
1. Download Trev-E's mod for the Wifi Tether for Root Users app. I have the exact version I used attached to this post.
2. Install it, and immediately go to settings and make the following adjustments:
- Change device profile to "Generic ICS/JB (wlan0)."
- Change setup-method to "Netd-Ndc (master)."
- Tick the option "Send Netd Max Client Cmd."
- Tick "Wifi driver reload." The second one did not work for me, but try it if the first reload does nothing.
- Although the original tutorial says to tick "MSS clamping," this option is not available on my phone. But this did not stop the app from working.
3. Exit settings and hit the wifi icon. Fingers crossed it works for you!
After doing that, the app showed no errors in the log, the network name appeared on my computer, and I was able to connect effortlessly. Most importantly, the internet worked!
Also, enabling/disabling the tether DID NOT break my phone's wifi or 3G service. Everything ran fine when I stopped using the app and I didn't need to restart my phone. Putting this out there because I know some phones will trip out when enabling this feature. Good luck! And big thanks to xda's Trev-E for the app.
Thank you! That was driving me nuts trying to tether my GS2 to my tablet. I dont have the clamping option either but its working perfectly when nothing else has.
Nice instructions. I rooted my phone today (root virgin), downloaded the trev-e you have linked and got it to work. (Virgin Mobile Samsung Galaxy SII 4G)
I then tried to use encryption and the phone was just not having it, the internet connection wouldn't work anymore (laptop was connected but said there was no internet access). Frooze up the phone, had to reboot, frooze again, reboot, turn the feature off, freeze, reboot, pull battery etc etc. Finally have it working again with encryption off.
Pretty happy to have tethering working, but wish I could encrypt it haha.
Do I have the wrong TrevE using the stock ROM? (using the TrevE linked in this thread).
Now to learn what else to do in the wonderful world of being rooted...
*** EDIT- Looks like installing busybox fixed the issue!!
Thanks!
Awesome work, follow the instructions if you have virgin mobile it will work perfectly
So it seems that Lollipop's implementation of IPv6 doesn't work at all, and Google knows about it. Search "Lollipop ipv6" on Google for a bunch of info about it.
This is definitely the case on my Comcast router at home, as it takes 5-10sec of lag to even start loading something over Wifi, until IPv6 times out and it reverts to v4. I can't disable IPv6 on my router, and my LG G4 is too new to have a reliable root performed (I've tried, it didn't work). The only option is to use the app DNSet, which uses a VPN somehow to force the phone to use IPv4.
Well, when I do that, my phone suddenly becomes completely unable to receive MMS text messages. Also, I don't like that the app is routing all of my traffic through some guy's garage.
So I have this awesome new LG G4 and I have to choose between Wifi working properly, or MMS texts working properly? That is BS. Seriously has anyone come up with a fix for this that actually works?? Or do I have to go buy a new router without IPv6??
The networking chip on my moto Z got fried and as a result I don't have any Bluetooth or wifi capabilities. My problem is that the phone for some reason checks for Bluetooth and as a result I get a constant spam of "Application Bluetooth has stopped working" which I can't stop. I've tried different roms and in none of them I can't seem to be able to disable the popup spam . Is there a way to disable or remove the Bluetooth part of the software. Either via adb or root or something?